B5T-007001-010

B5T-007001 Human Vision Components (HVC-P2) HVC incorporates ten different image sensing functions like Face recognition in an easy-tomount and compact format to provide image sensing capability to various devices. • Choice of wide-angle type and long-distance type depending of detection distance or range needs. • Incorporates ten different image sensing functions used to recognize people's conditions. Make sure to read the Terms of Use before using the Product. Omron will see any use of the Product as an indication that you agree and will comply with the contents of these Terms of Use. "HVC" stands for "Human Vison Components". RoHS compliant Refer to Safety Precautions on page 10. Model Approximately 50 deg. (long-distance type) Approximately 90 deg. (wide-angle type) Model B5T-007001-010 B5T-007001-010H B5T-007001-020 B5T-007001-020H Packaging Minimum contents per box Individual box 1 unit Large box 50 units Individual box 1 unit Large box 50 units B5T-007001 Lens angle For detailed interface specifications for the Product, refer to the Command Specifications document (provided separately). Information concerning the following items included with the Product: • Datasheet • Command Specifications document • USB drivers • Demo software • Other development related documentation can be downloaded from the website below: https://plus-sensing.omron.com/product/B5T-007001/ Term Definitions • The "Product" indicates the BT5-007001-010 models. It consists of the "Device" and the "SDK". In this instruction sheet, the word "Product" refers to the whole or a part of them. • The "Device" indicates the hardware component that consist of the main board, the camera board and the flexible flat cable (FFC). • The "SDK" consists of the demonstration software, the command specifications and other documentations concerning the "Device" or the "SDK." 1 B5T-007001 Human Vision Components (HVC-P2) Ratings / Specifications / Functions ■ Ratings Item Rated values (standards) Supply voltage 5 VDC ±10% Consumption current Below 0.4 A Operating temperature 0 to +50°C (no condensation or freezing) Operating humidity Below 90% RH (no condensation or freezing) Storage temperature -30 to +70°C (no condensation or freezing) Storage humidity Below 90% RH (no condensation or freezing) ■ Specifications & Functions Image Input Specifications Specifications Item B5T-007001-010 model B5T-007001-020 model Detection resolution 1600 × 1200 pixels 1600 × 1200 pixels Horizontal detection range (angle of view) 54°±3° 94°±5° Vertical detection range (angle of view) 41°±3° 76°±5° Optical axis inclination ±4° ±7° Rotation alignment ±2° ±2° Image Output Specifications Item Specifications Output image No output / 160 × 120 pixels / 320 × 240 pixels (choose one) Image format RAW (8-bit, Y data) Angle Range *1 Function Pitch angle (up-down) Yaw angle (left-right) Human body detection Up 15° *2 Down -30° *2 360° *3 Hand detection ±20° ±30° Face detection ±30° ±90° Face direction ±20° Face direction ±30° Gaze angle ±20° *4 (up to face direction ±10°) Gaze angle ±30° *4 (up to face direction ±20°) Roll angle ±10° Face direction estimation B5T-007001 Age estimation Gender estimation Blink estimation ±45° Expression estimation Face recognition Gaze estimation *1. *2. *3. *4. The detection and estimation accuracy will fall when outside the specified angle range. Note that being within range indicated above does not always guarantee successful detection. “Up direction 15°” indicates that the camera is looking up to the target from a 15° downward angle and “Down direction -30°” indicates that the camera is looking down to the target from a 30° upward angle. This indicates all the directions to the left and right of the human body. This is the angle when facing the camera, regardless of the face direction angle. roll angle - + + Pitch angle - Host Communication Specifications UART Item Feature Specifications Receives the command controlling the module from the host and sends back the detection result info System Full duplex bidirectional system Protocol Non-procedural Sync Asynchronous method Data format Start: 1 bit, Data: 8 bit, Stop: 1 bit, no parity Transmission code NRZ method, Logic low: 0V & logic high: 3.3 V Transmission rate 9600 (Default value)/38400/115200/230400/460800/921600 bps, can be changed through commands 2 Yaw angle + B5T-007001 Human Vision Components (HVC-P2) USB Item Specifications Feature Receives the command controlling the module from the host and sends back the detection result info System USB 2.0 (CDC class used) Protocol Non-procedural Data format Start: 1 bit, Data: 8 bit, Stop: 1 bit, no parity Supported OS Windows 7, 32 bit (refer to website for other versions) https://plus-sensing.omron.com/product/B5T-007001/ Image Sensing Functions Function Output Number of detected objects Face Direction Estimation Gaze Estimation Blink Estimation Age Estimation Gender Estimation Position (center coordinates) Coordinates on the screen from the top-left corner of the screen (in pixels) Size Pixel size on the input image Degree of confidence Confidence in the detection result (0 to 1000), a higher value indicates a higher confidence Yaw angle Positive to the right (in degrees) Pitch angle Positive upwards (in degrees) Roll angle Positive clockwise (in degrees) Degree of confidence Confidence in the estimation result (0 to 1000), a higher value indicates a higher confidence Yaw angle Positive to the right (in degrees) Pitch angle Positive upwards (in degrees) Blink degree Output for both eyes (1 to 1000), a higher value indicates the eye is closer to being fully shut Age 0 to 75 (75 includes higher ages) Degree of confidence Confidence in the estimation result (0 to 1000), a higher value indicates a higher confidence Gender Male or female Degree of confidence Confidence in the estimation result (0 to 1000), a higher value indicates a higher confidence Score for 5 expressions 0 to 100 The score will be output for each expression ("neutral", "happiness", "surprise", "anger" and "sadness"). The score indicates the likeliness of a face displaying the estimated expression, where a higher score indicates a higher likeliness of being that expression. Expression degree (positive or negative) +100 to -100 A degree closer to +100 indicates a high degree of "happiness" while a degree closer to -100 indicates a high degree of "surprise", "anger" or "sadness". Individual identification result Displays either the registered User ID, or "non-registered" for non-registered individuals Maximum number of users: 100 Maximum number of data per use: 10 Registration is done with the Product. Score Matching degree (0 to 1000) The result of the user with the highest matching degree is output. A degree closer to 1000 indicates a higher likeliness of being that user Expression Estimation Face Recognition B5T-007001 Human Body Detection, Face Detection, Hand Detection Details Maximum of 35 per object type Degrees of confidence are grain size 1. Angles are for when facing the camera. ■ Image Input Specification Item Definitions Horizontal and Vertical Detection Range (angles of view) Horizontal angle of view 50° B5T-007001-010 Horizontal angle of view 90° B5T-007001-020 Standard side Standard side Vertical detection range Vertical detection range Horizontal detection range Horizontal detection range Standard side Standard side 3 B5T-007001 Human Vision Components (HVC-P2) Optical Axis Inclination Horizontal angle of view 50° B5T-007001-010 Horizontal angle of view 90° B5T-007001-020 A: Axis line from the camera center when mounted as per standard method B: Axis line from the camera detection area center A: Axis line from the camera center when mounted as per standard method B: Axis line from the camera detection area center The Optical Axis Inclination indicates the angle difference between A and B. The Optical Axis Inclination indicates the angle difference between A and B. De aretecti a o n De aretecti a o n B B A A B5T-007001 Rotation Alignment Horizontal angle of view 50° B5T-007001-010 Horizontal angle of view 90° B5T-007001-020 C: Horizontal and parallel line when mounted as per standard method D: Horizontal line of the camera detection area C: Horizontal and parallel line when mounted as per standard method D: Horizontal line of the camera detection area The Rotation Alignment indicates the angle difference between C and D. The Rotation Alignment indicates the angle difference between C and D. Horizontal line when mounted as per standard method Horizontal line when mounted as per standard method De aretecti a o n De aretecti a o n C D C D 4 B5T-007001 Human Vision Components (HVC-P2) Connection ■ Block Diagram B5T-007001 Host UART connector UART(3.3V Reset Command Results DC5V Power supply Recognition Process Section USB connector USB Camera board DC5V Power supply Main board Customer circuit B5T-007001 Note: Do not use the USB and UART connection simultaneously. 5 B5T-007001 Human Vision Components (HVC-P2) Parts & Functions Front Horizontal angle of view 50° B5T-007001-010 CN3 Main board Flexible Flat Cable (FFC) CN5 pin assignment Note: Remove the protective lens before use 2 3 4 5 6 CN5 Camera board Horizontal angle of view 90° B5T-007001-020 CN3 Main board Flexible Flat Cable (FFC) CN5 pin assignment 2 3 4 5 6 B5T-007001 CN5 Symbol Description Camera board Note: Remove the protective lens before use Function CN3 USB connector (MicroUSB Type B) USB communication, power supply CN5 UART connector UART communication, power supply, reset input Note: Do not use the USB and UART connection simultaneously. Do not change the main board and camera board configuration. Try to limit the number of times CN3 and CN5 are connected/disconnected below 10. Back Horizontal angle of view 50° B5T-007001-010 Horizontal angle of view 90° B5T-007001-020 LED Symbol LED 6 Description LED display light Function Lit when power is ON Off when proceeding commands from Host B5T-007001 Human Vision Components (HVC-P2) Dimensions (Unit: mm) (Units: mm / unspecified dimension tolerance: tolerance class IT16) Front Horizontal angle of view 50° B5T-007001-010 113±5 45 40 Four, 2.2 dia. 25 20 2.1 dia. 2.5 10.6 28.2 45 (R) 2.1 40 2.3 dia. 20 25 20 25 2.3 dia. Horizontal angle of view 90° B5T-007001-020 113±5 45 40 Four, 2.2 dia. 25 20 2.1 dia. 2.5 10.6 28.2 45 (R) 2.1 40 2.3 dia. 2.3 dia. B5T-007001 Back Horizontal angle of view 50° B5T-007001-010 Max. 4.9 Max. 4 1 1 Max. 2.8 Max. 3.2 Horizontal angle of view 90° B5T-007001-020 Max. 11.9 Max. 4 1 1 Max. 2.8 Max. 3.2 Dimensions when mounted Main board Camera board 45 40±0.1 25 20±0.1 45 25 40±0.1 20±0.1 Four, M2 Four, M2 Four, 4 dia. Four, 4 dia. Do not install metallic parts for mounting on the shaded areas. Note: Do not install metallic parts for mounting on the shaded areas 7 B5T-007001 Human Vision Components (HVC-P2) Main Board Front Main Board Back 2.8 10.6 15.3 28.2 Camera Board Horizontal angle of view 50° B5T-007001-010 Horizontal angle of view 90° B5T-007001-020 10 10 6.5 8 10 10 6.5 8 10 dia. 8 dia. 6.5 dia. 5 dia. B5T-007001 1.8 8 1 1.6 2.3 3 1.8 1 4.2 5.6 B5T-007001 Human Vision Components (HVC-P2) Connector Pin Assignment CN5: Provides power and the UART communication interface. Board-side connector: SM06B-SRSS-G-TB (made by J.S.T. Connectors, recommended for use) Housing: SHR-06V-S-B or SHR-06V-S (made by J.S.T. Connectors) Contact: SSH-003GA-P0.2 (made by J.S.T. Connectors) Pin number Signal I/O 1 Vcc - 2 UART RX * Input 3 UART TX Output 4 GND - 5 RESET Input Description Power supply 5.0 V ±10% UART [receive] (Device  Host) Logic 0: 0 V Logic 1: 3.3 V UART [send] (Host  Device) Logic 0: 0 V Logic 1: 3.3 V Ground Reset signal (Device  Host) Logic 0: 0 V Logic 1: 3.3 V Reset is active on logic 0 6 RESERVED - Do not connect to this * Do not make the RX terminal floating when applying power to the Device. Note: Do not use CN3 and CN5 simultaneously. Mounting Method Four, 2.2 dia. 2.1 dia. 2.5 2.1 2.3 dia. Camera board 2.3 dia. B5T-007001 Main board Note 1: This figure is for a frontal mounting direction (0°) of the module. Settings need to be changed through commands when mounting the Device at a clockwise rotation angle of 90°, 180° or 270° from the front. Note 2: Fix each board with the M2 screws in the four board corner holes. Make sure not to bend or break the board when fastening the screws. Apply torque appropriately for the screws used. Note 3: Make sure to fix the board so that it is not warped, bent or any under unreasonable stress. Note 4: Make sure that the board is sufficiently distanced from any electrically-conductive part. Note 5: Take proper measures against static electricity. 9 B5T-007001 Human Vision Components (HVC-P2) Safety Precautions Make sure to read these precautions for a safe use of the Prod- The following will result in accident or injury if ignored. uct. • The contents included is to ensure proper use of the Product and prevent harm and/or property damage to the user or other people. • Warnings and cautions are defined as follows. ● Definition of Warning and Caution Warning Denotes a potentially hazardous situation which, if not avoided, may result in minor, moderate or serious injury, or death. It may also result in serious damage. Caution Denotes a potentially hazardous situation which, if not avoided, may result in minor or moderate injury, or damage. "Damage" indicates property damage to a building, production Install the Device and the cables out of reach of infants. Store the Device out of reach of infants when not using it. Contact emergency services at once if small parts are ingested. Do not touch sharp parts or the exposed interior of the Device that was damaged. Caution Regarding the use or handling of the Product: line, household goods, other products, livestock, pets, etc. ● Examples of indications Make sure to follow the warnings and cautions indicated in this document when using the Product. Indicates forbidden actions. The following will result in accident, injury or damage if ignored. Indicates required actions. Warning B5T-007001 Regarding use: Do not use the Product for safety of life or crime prevention purposes. Do not use the Device on automobiles or other vehicles, including bikes as it may result in accidents. The following will result in fire, electric shock, injury or damage if ignored. Do not touch the Device or any connected cable during a lightning storm. Do not use the Device if it is cracked or damaged. Do not insert foreign objects in the connector or in the holes on the various parts of the Device. Do not use the Device in bathrooms or any other place where it may get in contact with water. Do not touch the Device or any connected cable with wet hands. Do not install the Device in a location subjected to animal or human body fluids. Do not disassemble, repair, or modify the Device. Turn the power off and stop using theProduct if you notice any anomaly, including foul odor, distortion or discoloration to the Device during use. Install the cables in a way that would not put strong force on them, including making sure they are not crushed in a door. 10 Do not install the Device in an unstable location, where it could fall down, or where it can be subject to vibrations. Install the cables in a safe way, out of the way of hands or feet. The following will result in burns or damage due to heating if ignored. Do not wrap the Device in a blanket or sheets, etc. when it is powered on. Do not use or store the Device next to fire, heating equipment, in direct sunlight, in cars or in any other location subject to high temperature. The Device may produce heat. Do not touch it when transmitting or shortly after powering it off. B5T-007001 Human Vision Components (HVC-P2) Check the Product for physical damage upon opening its package. It is recommended to wear gloves when opening the package. Follow the indications listed below for a safe use of the Product. (1) Installation Environment • There is potential internal deterioration and damage of internal parts of the Device. Do not use the Product in conditions exceeding the ratings for temperature and humidity. • Do not use the Product in an environment where condensation occurs. • Do not use the Product in an environment subjected to water, oil or chemicals spills. • Do not use the Product in an environment subjected to corrosive, combustible or explosive gas. • Do not use the Product in an environment where dust, salt or iron powder are present. (2) Power Supply and Wiring • Make sure there is no faulty wiring of I/O terminals, etc. as this may result in fire. • Do not connect the DC power supply terminal to AC power. • Do not connect the Product to DC voltage above the rated capacity. • Do not reverse-connect the DC power supply. • Make sure to turn the Device off before removing cables. • Do not connect the UART connector (CN5) to asynchronous method non-compliant devices. • Make sure to check the Device and the connector pins for distortion or physical damage before connecting or removing cables. • Connect a commercially available MicroUSB cable to the USB connector (CN3). Make sure the cable is not damaged and do not modify it. (3) Others • Do not disassemble, repair or otherwise remodel the Device. • Treat the Product as industrial waste when disposing of it. • Use the M2 screws on the fixing holes on the Device when fixing it. Make sure not to bend or break the board when fastening the screws. Apply torque appropriately for the screws used. • Do not apply stress on the Device, e.g. twists, deflections or impacts, as it may result in causing defects or degradation. • Do not apply stress on the connector or display implementation parts when installing the Device, as it may result in causing defects or degradation. Precautions for Safe Use Observe the following precautions to prevent failure to operate and malfunctions, and to prevent adversely affecting the performance and function of the Product. • Store the Device at a temperature between -30 and +70°C and a humidity level below 90%. • Do not touch the board mounted parts with bare hands. Discharge any static electricity from the user before use. • Take proper measures against static electricity by using an antistatic wrist strap, etc. before handling the Product. • Make sure to properly ground the connector's earth terminal in order to prevent malfunction due to noise. • Do not use the Product in places where the surrounding temperature goes above the rating range. • Do not use the Product in a location where it would be subjected to direct sunlight. • Do not use the Product in a location subject to excessive inductive or power supply noise, such as in strong magnetic or electric fields. • Do not use the Product in a location where it would be subjected to strong UV light. • Do not use the Product in a location where it would be subjected to radiation. • Sufficiently evaluate the electrical characteristics of any connection to the Device. • Make sure to properly align the connectors when connecting them. • Avoid desorption of power supplied connectors as it will result in accidents. • Refer to the B5T-007001 Command Specifications document separately provided by OMRON for details on the interface specifications. • Never use benzene, paint thinner, or any other volatile cleaning solution, detergent, bleach or chemical washcloth for cleaning the Device. • Take in consideration heat dissipation from the Device when installing it in order to improve its long term reliability. • Install the Device sufficiently far away from any other surrounding charged parts. • Install the Device making sure not to obstruct the camera detection range. • Use transparent materials to cover and protect the front of the lens should it be in contact with hands or objects. • Remove the lens protective seal before use (B5T-00701-010). • Remove the lens protective cover before use (B5T-00701020). • Do not touch the camera module. • The Product performs detection on images. As such, note that it may sometimes detect objects other than living bodies, such as photographs or posters. • Note that since the Product uses a camera for detection, successful detection may not be possible due to light orientation, brightness or exposure issues. • Make sure to reset the Product before using it again following a power interruption or failure. • Restart or reset the Device if data is received improperly. • Cutting or losing power to the Device while saving the Album on the flash ROM may destroy the Album data saved on it. As such, make sure to take a backup of the Album data on the Host device. Refer to the B5T-007001 Command Specifications document for details. • Do not use the USB and UART connection method simultaneously. • Do not remove the FFC connection between the main board and the camera board, and do not alter the configuration of the combination. • When using the USB connector, note that the bus power may not be properly powering the Device depending on the computer USB port used. In such case, use a device like a selfpowered hub with an AC adaptor. 11 B5T-007001 Precautions for Safe Use B5T-007001 Human Vision Components (HVC-P2) Terms of Use and Disclaimer tions that could cause danger/harm to people's body and Omron will see any use of the Product as an indication that you life. agree and will comply with the contents of these Terms of Use. (1) Definitions: (b) Applications that require high reliability, including but not In addition to the definition in "Term Definitions" section above, limited to supply systems for gas, water and electricity, etc., the terms in this section have the following meaning. 24 hour continuous operating systems, financial settlement 1) Software: (i) Omron's OKAOTM systems and other applications that handle rights and prop- software, as embedded in the erty. Device, and (ii) software included in the SDK. 2) Customer: Distributor and/or the end Customer who intro- (c) Applications for use under severe conditions or in severe environments, including but not limited to outdoor equip- duces or uses the Product in the Customer Application. 3) Customer Application: Any kind from application,integration or ment, equipment exposed to chemical contamination, use of the Product in connection with the Customer’s end equipment exposed to electromagnetic interference and equipment exposed to vibration and shocks. product. (2) CAUTION ON DESCRIPTIONS (d) Applications under any conditions or environments not specifically described in the specifications. Attention is required to the following points: 1) Rated values and performance values are the product of tests (e) Automotive applications (including automotive applications relating to two wheel vehicles). performed for separate individual conditions, including but not limited to temperature and humidity. Omron does NOT warrant (f) Applications which aim to cause danger/harm to people's the rated and performance values indicated for multiple com- life, body or property, including but not limited to weapons and criminal activities bined conditions. 2) Reference data is provided for reference only. Omron does IF THE CUSTOMER INTRODUCES, USES, OR INTEGRATES NOT warrant that the Product works properly at all times in the THE PRODUCT IN THE APPLICATIONS DESCRIBED IN SEC- range of the reference data. TION (4)3)(a) to (4)3)(f), OMRON SHALL NOT PROVIDE ANY 3) Application examples are provided for reference only. Omron (5) CUSTOMER APPLICATION Application. The precautions and conditions of use written above also apply 4) Omron may discontinue the production of the Product or B5T-007001 WARRANTY FOR THE PRODUCT. does NOT warrant the fitness of the Product in a Customer equally to end-Customers. DISTRIBUTORS shall ensure that change its specifications for the purpose of improving it, or any such conditions of use are being made clear to end-Customers. other reasons, at Omron's sole discretion and at any time. (6) LIMITED WARRANTY AND LIMITATION OF LIABILITY (3) The Product has face detection function. As such, the Customer shall take proper care of privacy, portrait right, copyright or any other rights of people. (4) PRECAUTIONS AND CONDITIONS OF USE ANY WARRANTY ON THE PRODUCT SHALL NOT APPLY IF The Customer accepts the following precautions and conditions MENT. OMRON DISCLAIMS ALL LIABILITY, TO THE EXTENT when the Customer introduces or uses the Product in a Cus- POSSIBLE BY LAW, FOR ANY AND ALL COSTS OR DAM- tomer Application: AGES WHICH MAY ARISE IN RELATION TO THE PRODUCT 1) The Customer shall use the Product in compliance with the OR CUSTOMER APPLICATION WHERE THE PRODUCT OR instructions noted in the instruction sheet, including but not CUSTOMER APPLICATION IS INTRODUCED, INTEGRATED limited to, ratings and performance. OR USED IN A MANNER THAT IS NON-COMPLIANT WITH 2) The Product is composed of (i) hardware and (ii) the Software. The Software is an inseparable part of the Product and the use THE PRODUCT IS NOT INTRODUCED, USED OR INTEGRATED IN ACCORDANCE WITH THE PRECAUTION AND DISCLAIMER STATEMENTS INCLUDED IN THIS DOCU- THE PRECAUTION AND DISCLAIMER STATEMENTS INCLUDED IN THIS DOCUMENT. and application of this Software is strictly limited to the use and application of the Product as a whole, to be used in a Cus- OMRON SHALL NOT BE LIABLE FOR LOSS OF USE OR ANY tomer Application. It is strictly forbidden to extract, copy, OTHER SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDI- amend or reproduce the Software and/or to otherwise infringe RECT COSTS, EXPENSES OR DAMAGES. Omron's intellectual property rights on the Product and/or the Software, and doing or attempting to do so may be punishable by law. 3) THE PRODUCT SHALL NOT BE USED IN THE FOLLOWING APPLICATIONS: (a) Applications with stringent safety requirements, including but not limited to nuclear power control equipment, combustion equipment, aerospace equipment, railway equipment, elevator/lift equipment, amusement park equipment, medical equipment, safety devices or any other applica- 12 Inquiries about the B5T-007001 Series OMRON Corporation Inquiry about HVC-P2 Electronic and Mechanical Components Company Application Oriented Business Division MAIL okao-vision@omm.ncl.omron.co.jp WEB http://plus-sensing.omron.com/ Cat. No. A258-E1-01 0816(0816)(O) © OMRON Corporation 2016 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice.