C200H-RM201

9 SYSMAC BUS Network Components Overview Summary of All Parts to Build a SYSMAC BUS Communications System 1 Transmit status of up to 512 I/O over a maximum distance of 200 m 1 Wide variety of I/O slaves 1 SYSMAC BUS allows communications with all Omron PLCs 1 Easy to configure, the network connects slave units by twisted pair cables in daisy-chain fashion 1 Transmission speed is 2 ms per node (each slave unit is counted as a node) Ordering Information Product Appearance Remote Master Modules for CS1 and C200H PLCs Specifications Part number Wired remote I/O C200H-RM201 Fiber-optic remote I/O, plastic core C200H-RM001-PV1 Remote Master Modules for CV/CVM1 PLCs RM201 T/R ERR TEST OK END RS CHK LINE ERROR TEST RM001 XFER ERR TEST GOOD ENDSTA CHECK Standards UL CSA CE (See Note.) Wired remote I/O C500-RM201 Fiber-optic remote I/O, plastic core 3G2A5-RM001-PEV1 Fiber-optic remote I/O, glass core 3G2A5-RM001-EV1 RS485 Transmission Media for SYSMAC BUS system ------ Shielded twisted pair cable APF (all plastic) fiber-optic cable Connectors for APF 0-10 m long Connectors for APF 8-20 m long HPCF (plastic clad) cable, 50 m HPCF cable, 100 m HPCF cable, 500 m HPCF cable, 1 km Zipcord HPCF cable, 50 m Connectors for SYSMAC BUS Termination kit for HPCF cable AGF (quartz core) fiber-optic cable Belden #9271 or similar B500-PF212 3G2A5-CO001 3G2A5-CO002 FCS-HCR-LB-501 FCS-HCR-LB-102 FCS-HCR-LB-502 FCS-HCR-LB-103 FCS-HCR-CO-501 S3200-COCH82 FCS-CAK6230-US Commercially available ------ Remote Interface Module connects 16-point G70A and G7TC I/O Relay Blocks to SYSMAC BUS Input for G7TC-IA16, G7TC-ID16 Input for G70A-ZIM16-5 Output for G7TC-OC08, G7TC-OC16, G70A-ZOC16-3 G71-IC16 DC24V G71-IC16-3 DC24V G71-OD16 DC24V UL CSA CE (See Note.) Transistor Remote Module, 16-point blocks Input block, NPN Input block, PNP Output block, NPN Output block, PNP G72C-ID16 DC24V G72C-ID16-1 DC24V G72C-OD16 DC24V G72C-OD16-1 DC24V UL CSA CE (See Note.) Note: Information on EC Directives Individual OMRON products that comply with EC Directives conform to the common emission standards of EMC Directives. How-ever, the emission characteristics of these products installed on customers’ equipment may vary depending on the configuration, wiring, layout, and other conditions of the control panel used. For this reason, customers are requested to check whether the emission characteristics of the entire machine or equipment comply with the EMC Directives. SYSMAC BUS Overview SYSMAC BUS Overview Product Appearance Specifications Part number Standards Remote Vertical Module, slim profile, 16-point blocks Input block Output block G730 Remote Master and Expansion Masters for CQM1 controllers Remote master, 32 or 16 inputs or CQM1-G7M21 outputs, selectable Expansion master, 32 or 16 inputs, CQM1-G7N11 selectable Expansion master, 32 or 16 CQM1-G7N01 outputs, selectable UL CSA Remote Relay Modules Input block, 4 points 12 VDC Input block, 4 points, 24 VDC Input block, 4 points 100/110 VAC Input block, 4 points, 200/220 VAC Output block, 4 points, 24 VDC Output block, 8 points, 24 VDC Output block, 16 points, 24 VDC G730-RID04 DC12 G730-RID04 DC24 G730-RIA04 AC110 G730-RIA04 AC220 G730-ROC04 DC24 G730-ROC08 DC24 G730-ROC16 DC24 UL CSA Remote MOSFET Relay Modules Output block, 8 points, 24 VDC Output block, 16 points, 24 VDC G730-AOM08 DC24 G730-AOM16 DC24 UL CSA Remote Relay I/O Block Base accepts G2R electromechanical relay, G3R SSR or G3RZ power MOSFET relays Input base, 4 points, 5-24 VDC Input base, 4 points, 100-240 VAC Output base, 4 points, 24 VDC G730-ZID04 DC5-24 G730-ZIA04 AC100-240 G730-ZOM04 DC24 UL CSA Remote Relay Output Module with Fault Detection for contact weld and open load lines Output block, 4 points, 24 VDC Output base, 4 points, 24 VDC for G2R relay, G3R SSR or G3RZ MOSFET relay G730-ROC04-A DC24 G730-ZOM04-A DC24 UL CSA Remote Transistor Module in ultra-compact housing 4 transistor input (NPN) 8 transistor inputs (NPN) 8 transistor inputs (PNP) 16 transistor inputs (NPN) 4 transistor outputs (NPN) 8 transistor outputs (NPN) 8 transistor outputs (PNP) 16 transistor outputs (NPN) G730-VID04 G730-VID08 G730-VID08--1 G730-VID16 G730-VOD04 G730-VOD08 G730-VOD08--1 G730-VOD16 UL CSA Track mounting adapters for G730-V modules For G730-V 4-point modules For G730-V 8- and 16-point modules G730-Y31 G730-Y30 ------ DIN rail mounting track 0.5 m length, 7.3 mm depth 1 m length, 7.3 mm depth 1 m length, 16 mm depth PFP-50N PFP-100N PFP-100N2 ------ DIN track spacer ------ PFP-S ------ DIN track end cap ------ PFP-M ------ G72C-VID16 DC24V G72C-VOD16 DC24V UL CSA CE (See Note.) Note: Information on EC Directives Individual OMRON products that comply with EC Directives conform to the common emission standards of EMC Directives. How-ever, the emission characteristics of these products installed on customers’ equipment may vary depending on the configuration, wiring, layout, and other conditions of the control panel used. For this reason, customers are requested to check whether the emission characteristics of the entire machine or equipment comply with the EMC Directives. 2 CompoBus/S Overview CompoBus/S Overview NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. 9 OMRON ELECTRONICS, INC. OMRON CANADA, INC. One East Commerce Drive Schaumburg, IL 60173 885 Milner Avenue Scarborough, Ontario M1B 5V8 1-800-55-OMRON 416-286-6465 Cat. No. GC RIO-1 04/00 Specifications subject to change without notice. Printed in U.S.A.