CMS221PC5

Safety Interlock Switches CM Series Most Diverse and Flexible Line of Coded Magnetic Safety Interlock Switches and Controllers • Combine door switch monitoring and E-stop monitoring by using the CM-S41 controller • Monitor is single switch to CAT4 with the CM-S30 controller • Monitor multiple switches to CAT3 using CM-S4 or CM-S30 controllers • Monitoring multiple switches on individual channels can be achieved by using the CM-S21 or CM-S41 controllers. Easily expand your system by using the CM-SE expansion module. • All CM switches are rated IP67 • Stainless steel switches are available for harsh environments • A Rapid Delivery Product: Select models are available for shipment today or within 3 to 5 days R C US Conforms to EN292, EN60204-1, EN954-1, EN1088, EN60947-5-3, EN947-5-3, EN50081, EN50082, EN61000-6-2, ISO 13849-1 UL and C-UL listed, TUV certified Description The CM series of controllers and coded magnetic switches offers the most flexibility and widest range of options available. The CM series is comprised of two basic technologies. Controller Technologies 2-Wire Single Channel Controllers The CM-S41 and CM-S21 controllers monitor the 2-wire magnetically coded switches. The CM-S41 and CM-S21 controllers use a patented technology which allows them to monitor the 2-wire or single channel switches up to Category 3. The ability to monitor just a single channel enables the CM-S41 and CM-S21 to easily monitor multiple switches and provide individual status of each channel. Both of these controllers are compatible with the CM-SE expansion module. Dual Channel Controllers The CM-S4 and CM-S30 controllers are designed to monitor conventional read-style, magnetically-coded switches with 1 N/O + 1 N/C contacts. The CM-S4 controller can monitor up to four switches to category 3. The CM-S4 controller offers status indication for each individual switch. The CM-S30 controller can monitor one switch to category 4, or two switches to category 3. The CMS30 control unit is capable of monitoring up to 30 conventional read style switches in series, but does not conform to category 3 when used with more than two switches. G Switch Categories The CM series of switches are all magnetically coded. The CM series of switches fall into three main categories: 1. 2-wire Coded Magnetic 2. Conventional Read Style 1 N/C + 1 N/O contacts 3. Universal Read Style 2 N/C + 1 N/O contacts The 2-wire Coded Magnetic Switches are only compatible with the CM-S21, CM-S41 and CM-SE control units and expansion module. The Conventional Read Style Switches are compatible with the CM-S4 and CM-S30 controllers. The Universal Read Style Switches are unique in design, all three contacts are rated for safety. This means that Universal Read Style switches can be used with the CM-S4 or CM-S30 Controllers, or conventional safety monitoring relays such as the G9SA, SR103 or G9SX-AD, -BC. This allows the Universal Read Style Switches to be run in series with E-stop switches or other mechanical door switches. Typically a category 2 rating would be applied to a system that incorporates multiple switches wired in series to a standard safety monitoring relay. A risk assessment should always be performed by properly trained and authorized personnel. Select models are available for Rapid Delivery. Visit this product on www.sti.com for details. www.sti.com/info G-63 CM Series Safety Interlock Switches Switch Specifications Electrical Safety Contacts: N/C Operating Distance: CM-S5, CM-S6 1 N/C + 1 N/O CM-S221, CMS521, CM-S621 2 N/C + 1 N/O CM-S11 Current Sensing Circuit On = 5-7 mm; Off = 8-12 m CM-S31 Current Sensing Circuit On = 5-7 mm; Off = 8-12 mm On = 7 mm; Off = 10 mm On = 7 mm; Off = 10 mm 1 mm 300 mA / 24 V 1 mm 300 mA / 24 V 1 mm 1 mm 1 mm 300 mA / 24 V 2 x M4 screws supplied Glass filled PPS 2 x M4 screws supplied ABS 2 x M4 screws supplied ABS 2 x M4 screws supplied ABS Max Wire Size: Pre-wired cable to 5 m Pre-wired cable to 10 m Pre-wired cable to 10 m Pre-wired cable to 10 m 2 x M4 screws supplied 316 stainless steel Pre-wired cable to 10 m Weight: Color: Mechanical Life: Environmental Protection: Operating Temperature: 230 g (8.1 oz.) Red 106 207 g (8.1 oz.) Red 106 230 g (8.1 oz.) Red 106 207 g (7.3 oz.) Red 106 265 g (9.3 oz.) Stainless 106 3 x M4 screws supplied 316 stainless steel Pre-wired cable to 5 m, 6-pin micro AC connector 545 g (19.2 oz.) Stainless 106 IP67 (NEMA 6) -10 to 55°C (14 to 131°F) IP67 (NEMA 6) -10 to 55°C (14 to 131°F) IP67 (NEMA 6) -10 to 55°C (14 to 131°F) IP67 (NEMA 6) -10 to 55°C (14 to 131°F) IP67 (NEMA 6) -10 to 55°C (14 to 131°F) Humidity: Compliance Standards: Approvals/Listings: 95% RH at 55°C (131°F) Case Material: EN292, EN60204-1, EN954-1, EN1088, EN60947-5-3, EN947-5-3, EN50081, EN50082, EN61000-6-2 CE marked for all applicable directives, UL and C-UL. TUV certified: CM-S1, CM-S2, CM-S3, CM-S11 and CM-S31. Specifications are subject to change without notice. Note: The safety contacts of the STI switches are described as normally closed (N/C) i.e., with the guard closed, actuator in place, and the machine able to be started. Select models are available for Rapid Delivery. Visit this product on www.sti.com for details. G-64 CM-S321, CM-S421 2 N/C + 1 N/O CM-S1 — On = 3 mm; Off = 8 mm CM-S2 and CM-S3 — On = 6 mm; Off = 13 mm 1 mm 500 mA / 24 V Minimum Gap: Max Switched Current/ Voltage: Mechanical Mounting: G CM-S1, CM-S2, CM-S3 1 N/C + 1 N/O www.sti.com/info On = 7 mm; Off = 10 mm IP67 (NEMA 6) Connector Models: -10 to 55°C (14 to 131°F) Integrated Cables: -10 to 95°C (14 to 203°F) CM Series Safety Interlock Switches Control Unit Specifications Electrical Power Supply: CM-S4 24 VAC/DC ± 10% CM-S30 24 VAC/DC ± 10% Power Consumption: 2.4 VA typical, 0.25 A quick acting 120 mA Input Fuse: Safety Inputs: 500 mA resetable 1 N/O + 1 N/C 750 mA resetable 1 N/O + 1 N/C Max Cable Length: Max Input Resistance: Relay Outputs: — Contact factory 1 N/O safety + 1 N/O aux. — Contact factory 2 N/O safety + 1 N/C aux. Max Switched Current/Voltage: Min Switched Current/Voltage: Impulse Withstand Voltage: Max Drop-Out Time: Max Output Fuse: Reset Mode: External Device Monitoring: Mechanical Mounting: Case Material: Max Wire Size: Weight: 4 A / 24 VAC/DC 4 mA / 12 V 250 V 18 ms 4 A quick acting Automatic N/C loop between Y1 and Y2 3 A / 24 VAC/DC 4 mA / 12 V 250 V 18 ms 4 A quick acting Automatic/Manual, monitored Between Y1, Y2, Y3 35 mm (1.38 in.) DIN rail Polyamid PA6.6 2 x 2.5 mm2 (12 AWG) 240 g (8.5 oz.) 35 mm (1.38 in.) DIN rail Polyamid PA6.6 1 x 2.5 mm2 (14 AWG) 230 g (8.1 oz.) Color: Indication: Grey U: Green = On Outputs Open: Red = On Outputs Closed: Green = On D11, D12, D21, D22: Green = Gate closed D31, D32, D41, D42: Red = Gate open 3 x 107 Red/Grey Green = Power On Green = K1 On Green = K2 On 1 x 107 35 mm (1.38 in.) DIN rail Polycarbonate 1 x 2.5 mm2 stranded, 1 x 4 mm2 solid CM-S41 — 575 g (20.3 oz.) CM-S21 — 183 g (6.5 oz.) CM-SE — 135 g (4.8 oz.) Red Power = Red Outputs Closed: Green = On Outputs Open: No Light = Off Gate Closed: Yellow = On Gate Open: No Light = Off 1 x 106 Housing IP40, Terminals IP20 0 to 50°C (32 to 122°F) 95% Housing IP40, Terminals IP20 0 to 55°C (32 to 131°F) 93% Housing IP40, Terminals IP20 10 to 55°C (50 to 131°F) 85% Mechanical Life: Environmental Protection: Operating Temperature: Humidity: Compliance Standards: CM-S41, CM-S21 & CM-SE CM-S41 — 24 VAC/DC, 110/230 VAC CM-S21 & CM-SE — 24 VAC/DC CM-S41 — 6 VA; CM-S21 & CM-SE — 3 VA 500 mA resetable CM-S41 — 4 CM-S11 or CM-S31 switches CM-S21 — 2 CM-S11 or CM-S31 switches CM-SE — 5 CM-S11 or CM-S31 switches 100 m (328 ft.) Contact factory CM-S41 & CM-S21 — 2 N/O; CM-SE — N/A 4 A / 230 VAC; 2 A / 24 VDC (resistive) 10 V / 10 mA 250 V Deactivation by sensor 13 mS AC = 5 A; DC = 2.5 A; quick acting Monitored manual or automatic N/C loop between X1 and X2 G EN292, EN60204-1, EN954-1,EN1088, EN60947-5-3, EN947-5-3, EN50081, EN50082, EN61000-6-2 Approvals/Listings: CE marked for all applicable directives, UL and C-UL, TUV (TUV pending for CM-S30) Safety Category: Cat 3 per EN954-1 Cat 4 per ISO 13894-1 Cat 3 per EN954-1 (internal operation) (internal operation) (internal operation) Specifications are subject to change without notice. Note: The safety contacts of the STI switches are described as normally closed (N/C) i.e., with the guard closed, actuator in place, and the machine able to be started. EN292, EN60204-1, ISO 13849-1, EN1088, EN60947-5-3, EN947-5-3, EN50081, EN50082, EN61000-6-2 Select models are available for Rapid Delivery. Visit this product on www.sti.com for details. www.sti.com/info G-65 CM Series Safety Interlock Switches Applications 2-Wire Single Channel Controllers CM-S41 Control Unit The CM-S41 is a combined Safety Switch and E-Stop control unit. Along with the ability to monitor up to four, 2-wire CM Series safety switches, it can also monitor the normally closed contacts of emergency stop buttons or mechanical safety switches in dual channel control circuits. The CM-S41 has 2 normally open safety contact outputs and 1 normally closed auxiliary output, an external reset/proving circuit and LED indication for “Power”, “Run” and the status of each activated gate switch. CM-S21 Control Unit The CM-S21 control unit is a 24 VAC/DC system that can monitor up to 2 CM Series safety switches. The CM-S21 has 2 normally open safety contact outputs and 1 normally closed auxiliary output, an external reset/proving circuit and LED indication for “Power”, “Run” and the status of each activated gate switch. G CM-S21 Application Diagram 24V (+ve) CM-SE Extender Module The CM-SE expansion module is a 24 VAC/DC unit that can be added to either the CM-S41 or CM-S21 to monitor an additional 5 CM Series safety switches. Connection to the main control unit is by a simple 2-wire bus connection. The status of each guard switch is shown by the YELLOW LED’s. Additional CMS-E modules can be added to monitor larger systems. GS1 A1 X1 BL DR 31 13 23 K1 GATE 1 K2 POWER IND 1 IND 2 MANUAL RE-SET RUN GATE 2 F2 F1 A2 X2 BL DR 32 14 24 GS2 0V (-ve) CM-S41 Application Diagram 24 V +ve GS1 GS2 A1 S13 S23 X1 BL DR BL DR 31 13 23 RUN 2 DE-SELECT GATE 2 3 GATE 3 4 GATE 4 POWER IND 2 IND 4 MANUAL RE-SET IND 5 GATE 4 GATE 5 F2 F1 ISIS-4 or ISIS-2 CM-S41 / CM-S21 Control CONTROL UNIT Units: Connect the CM-SE Bus Connect the ISIS-E connection to an active to Bus connection gate input. A2 GS4 GS5 GS3 GS4 G-66 A1 BUS A2 DR BL DR BL DR BL GATE 3 GATE 4 A2 S14 S24 X2 BL DR BL DR 32 14 24 N (-ve) IND 1 IND 3 K1 Control Unit GATE 1 GATE 2 GATE 3 K2 1 Extender Module GS1 GS2 GS3 A1 DR BL DR BL DR BL K1 GATE 1 GATE 2 POWER K1 K2 K2 CM-SE Application Diagram L (+ve) MECHANICAL SAFETY SWITCHES or EMERGENCY STOP K1 K2 K1 K2 www.sti.com/info 0V -ve 2-WIRE BUS CONNECTION BL DR CM Series Safety Interlock Switches Applications (continued) Dual Channel Controllers CM-S4 Control Unit The CM-S4 controller is capable of monitoring up to four, magnetically coded switches with 1 N/O + 1 N/C contacts up to category 3 according to EN954-1. The CM-S4 has a dedicated dual channel input for each switch and has LED status indicators for each channel. The CM-S4 has 1 N/O safety contact and 1 N/O Aux contact. External Device Monitoring (EDM) is available using Y1,Y2 inputs. CM-S30 Control Unit The CM-S30 controller is capable of monitoring one magnetically coded switch with 1 N/O + 1 N/C contacts up to category 4, or two switches to category 3 according to ISO 13489-1. The CM-S30 control unit is capable of monitoring up to 30 conventional read style switches in series, but does not conform to category 4 when used with more than two switches. The CM-S30 controller has 2 N/O safety contacts and 1 N/C Auxiliary contact. External Device Monitoring (EDM) is available using Y1,Y2 inputs. CM-S4 Application Diagram G CM-S30 Application Diagram (Cat 3) 24VAC/DC 24VAC/DC READ HEAD 1 READ HEAD 2 A1 A2 YE GN WH BN YE GN WH BN WH HL1 HL2 H22 BRN 2 3 4 5 6 7 GN GN GN GN BN H73 H74 Y1 ID D42 RD GN BN 16 WH YE FEEEDBACK LOOP 17 GN 18 Y1 Y2 CM-S30 Application Diagram (Cat 4) 14 24VAC/DC 24 K1 K2 A1 A2 K1 READ HEAD 3 K2 K4 RD 15 32 F2 N (0 Volt) K3 OUT CHANNEL 4 12 K1 K1 K2 GN D41 24 Y3 K1 MONITORED AUTO RESTART control logic D31 11 Y2 K1 D21 14 CHANNEL 21 START/ FEEDBACK LOOP CM-S30 K1 D12 WH YE GN K3 CHANNEL 2 D11 CHANNEL 3 10 GN K2 READ HEAD 4 READ HEAD 1 GN 9 23 YE RD CHANNEL 1 CM-S4 13 YE UB D12 D12 RD UB 8 MONITORED AUTO RESTART 1 31 GN K2 GN A2 23 GN K1 BRN A1 13 CHANNEL 1 WH HL1 HL2 H22 13 23 14 24 31 CHANNEL 1 WH BRN K1 UB YE GN GN K2 GN K3 CHANNEL 21 START/ FEEDBACK LOOP GN CMS-S30 N (0 Volt) H73 H74 Y1 Y2 K1 *23-24 should not be used as safety output. Y3 K1 K1 32 F2 MONITORED AUTO RESTART K1 K2 N (0 Volt) Select models are available for Rapid Delivery. Visit this product on www.sti.com for details. www.sti.com/info G-67 CM Series Dimensions 2-Wire Coded Magnetic Switches (mm/in.) CM-S11 Switch CM-S11 52 2.04 22 0.86 28 1.1 6.4 0.25 Ø4.2 0.16 Ø8.1 0.32 3 0.11 G 14 0.55 SIDE CM-S31 Switch CM-S31 53 2.08 22 0.86 28 1.1 6.4 0.25 Ø4.2 0.16 Ø8.1 0.32 3 0.11 Select models are available for Rapid Delivery. Visit this product on www.sti.com for details. G-68 Safety Interlock Switches www.sti.com/info 13.5 0.53 SIDE CM Series Safety Interlock Switches Dimensions (continued) (mm/in.) Conventional Read Style Switches CM-S1 Switch CM-S1 5 0.2 8.5 0.334 13 0.51 0.34 0.013 NOTE: Actuator is same dimension as switch. ca. Ø5.8 0.23 Actuator 4.5 in Center Offset m at s = 3 0.12 2.5 2.5 0.1 0.1 Son Active Area 19.2 0.755 26.2 1.03 42 1.65 22 0.87 36 1.42 7 0.28 G CM-S2 Switch CM-S2 67.5 2.66 87.5 3.44 6 0.24 13 0.51 Active Area 12 0.47 9.5 0.374 NOTE: Actuator is same dimension as switch. 2.5 0.1 Center Offset m at s = 3 0.12 2.5 2.5 0.1 0.1 Son Ø5.5 0.22 24.5 0.97 6 0.24 Actuator 0.34 0.013 ca. Ø5.8 0.23 42 1.65 78 ± 1 3.07 ± 0.04 CM-S3 Switch CM-S3 M30 x 1.5 0.06 42 1.65 36 1.42 8 0.31 ca. Ø5.8 0.23 Son 2.5 0.1 2.5 0.1 SW15 SW40 Active Area Actuator Center Offset m at s = 3 0.12 0.34 0.013 20 0.79 Select models are available for Rapid Delivery. Visit this product on www.sti.com for details. www.sti.com/info G-69 CM Series Safety Interlock Switches Dimensions (continued) (mm/in.) Conventional Read Style Switches (continued) CM-S5 CM-S5 and CM-S521 52.0 2.05 22.0 0.87 14.0 0.55 3.0 0.12 28.0 1.10 SIDE VIEW 4.2 dia. 0.17 8.1 dia. 0.32 6.4 0.25 G CM-S6 CM-S6 and CM-S621 19.0 0.75 4.9 0.19 19.0 0.75 5.0 0.20 SWITCH Select models are available for Rapid Delivery. Visit this product on www.sti.com for details. G-70 www.sti.com/info 19.0 0.75 82.5 3.25 82.5 68.0 3.25 2.68 5.0 0.20 4.9 0.19 7.2 0.28 19.0 0.75 73.0 2.87 7.2 0.28 ACTUATOR CM Series Safety Interlock Switches Dimensions (continued) (mm/in.) Universal Read Style Switches CM-S221 Switch CM-S221 13.5 0.53 78.0 3.07 27.2 1.07 Switch 9.8 0.39 87.5 3.44 9.8 0.39 27.2 1.07 Actuator 6.6 0.26 78.0 3.07 13.5 0.53 G CM-S321/CM-S421 CM-S321 and CM-S421 Note: The CM-S321 includes a backing plate (not shown). 17.8 with backing 0.70 plate 33.0 1.30 19.5 0.77 4.0 0.16 79.0 3.11 60.0 2.36 9.5 0.37 5.3 0.21 16.0 0.63 4.0 0.16 79.0 3.11 60.0 2.36 9.5 0.37 4.4 0.17 SWITCH CM-S521 33.0 1.30 19.5 0.77 16.0 0.63 5.3 0.21 17.8 with backing 0.70 plate 4.4 0.17 ACTUATOR CM-S621 CM-S521 dimensions, please refer to the ✎ For CM-S5 dimensions on the previous page. CM-S621 dimensions, please refer to the ✎ For CM-S6 dimensions on the previous page. www.sti.com/info G-71 CM Series Safety Interlock Switches Dimensions (continued) (mm/in.) Control Units CM-S4 CM-S4 CM-S4 75 2.95 75 75 2.95 2.95 45 1.77 45 45 1.77 1.77 105 4.13 105 105 4.13114.7 4.13 4.515 114.7 114.7 4.515 4.515 For 35 DIN rail 1.38 35 DIN rail For 35 For 1.38 DIN rail 1.38 G CM-S41 CM-S41 CM-S41 75 2.95 75 75 2.95 2.95 74 2.91 74 74 2.91 2.91 75 2.95 75 75 2.95 2.95 74 2.91 74 74 2.91 2.91 119 4.68 119 119 4.68 4.68 CM-S21 & CM-SE CM-S21/SE CM-S21/SE 22.5 0.88 22.5 22.5 0.88 0.88 84 3.3 84 84 3.3 3.3 119 4.68 119 119 4.68 4.68 Select models are available for Rapid Delivery. Visit this product on www.sti.com for details. G-72 www.sti.com/info 22.5 0.88 22.5 22.5 0.88 0.88 84 3.3 84 84 3.3 3.3 CM Series Safety Interlock Switches Dimensions (continued) Control Units (continued) (mm/in.) CM-S30 CM-S30 114 4.5 22.5 0.885 99 3.9 35 DIN RAIL MOUNTING 1.38 G Select models are available for Rapid Delivery. Visit this product on www.sti.com for details. www.sti.com/info G-73 CM Series Safety Interlock Switches Ordering G Switch Model Construction Contacts Wiring Entry Part No. Control Units for 2-Wire Switches CM-S21-24 (24 VAC/DC) 44536-0120 CM-S41-24 (24 VAC/DC) 44536-0140 CM-S41-110 (110 VAC or 230 VAC) 44536-0141 CM-SE-24 (24 VAC/DC) 44536-0170 2-Wire Switches CM-S11-PC3 Plastic 2-wire system 3 m cable 44536-1100 CM-S11-PC5 Plastic 2-wire system 5 m cable 44536-1105 CM-S11-PC10 Plastic 2-wire system 10 m cable 44536-1110 CM-S11-PCC5 Plastic 2-wire system connector + 5 m cable 44536-1159 CM-S31SC3 Stainless Steel 2-wire system 3 m cable 44536-3100 CM-S31SC5 Stainless Steel 2-wire system 5 m cable 44536-3105 CM-S31SCC5 Stainless Steel 2-wire system connector + 5 m cable 44536-3159 Control Units for 1 N/C + 1 N/O Reed Style Switches CM-S30 (24 VAC/DC) 44536-0030 CM-S4 (24 VAC/DC) 44536-0040 1 N/C + 1 N/O Reed Style Switches CM-S1PC3 Plastic 1 N/C + 1 N/O 3 m cable 44536-0100 CM-S1PC5 Plastic 1 N/C + 1 N/O 5 m cable 44536-0105 CM-S2PC3 Plastic 1 N/C + 1 N/O 3 m cable 44536-0200 CM-S2PC5 Plastic 1 N/C + 1 N/O 5 m cable 44536-0205 CM-S3PC3 Plastic 1 N/C + 1 N/O 3 m cable 44536-0300 CM-S3PC5 Plastic 1 N/C + 1 N/O 5 m cable 44536-0305 CM-S5PC5 Plastic 1 N/C + 1 N/O 5 m cable 44536-0505 CM-S5PC10 Plastic 1 N/C + 1 N/O 10 m cable 44536-0510 CM-S6PC5 Plastic 1 N/C + 1 N/O 5 m cable 44536-0605 CM-S6PC10 Plastic 1 N/C + 1 N/O 10 m cable 44536-0610 Universal Reed Style Switches (can be used with safety monitoring relays that accept 1N/C + 1N/O or 2NC switch contacts except the SR203, SR208, SR209) CAUTION! Universal reed switches may be operated with a coded or non-coded actuator when using 2 NC contacts with a safety monitoring relay. CM-S221PC5 Plastic 2 N/C + 1 N/O 5 m cable 44536-0221 CM-S221PCC5 Plastic 2 N/C + 1 N/O connector + 5 m cable 44536-0225 CM-S221PCC Plastic 2 N/C + 1 N/O no cable 44536-0226 CM-S521PC5 Plastic 2 N/C + 1 N/O 5 m cable 44536-0521 CM-S521PC10 Plastic 2 N/C + 1 N/O 10 m cable 44536-1521 CM-S621PC5 Plastic 2 N/C + 1 N/O 5 m cable 44536-0621 CM-S621PC10 Plastic 2 N/C + 1 N/O 10 m cable 44536-1621 CM-S321SC5 Stainless Steel 2 N/C + 1 N/O 5 m cable 44536-3221 Stainless Steel, M12 connector CM-S321SCC5 2 N/C + 1 N/O 44536-3229 backing plate + 5 m cable Stainless Steel, M12 connector, CM-S321SCC 2 N/C + 1 N/O 44536-3220 backing plate no cable Stainless Steel, No CM-S421SC5 2 N/C + 1 N/O 5 m cable 44536-4221 backing plate Stainless Steel, No M12 connector CM-S421SCC5 2 N/C + 1 N/O 44536-4229 backing plate + 5 m cable Recommended Safety Monitoring Relays for Universal Reed Style Switches CM-S4, CM-S30, G9SA series, G9SX-AD, G9SX-BC, SR series Spare Actuators/Accessories Replacement Actuator for CM-S1, Red ABS Plastic 44536-0710 Replacement Actuator for CM-S2, Red ABS Plastic 44536-0720 Replacement Actuator for CM-S3, Red ABS Plastic 44536-0730 Replacement Actuator for CM-S5,CM-S521 Red ABS Plastic 44536-0750 Replacement Actuator for CM-S6, CM-S621 Red ABS Plastic 44536-0760 Replacement Actuator for CM-S11, Red ABS Plastic 44536-0711 Replacement Actuator for CM-S31, Red ABS Plastic 44536-0731 Replacement Actuator for CM-S221, Red ABS Plastic 44536-0721 Replacement Actuator for CM-S321, Stainless Steel, backing plate 44536-0741 Replacement Actuator for CM-S421, Stainless Steel, No backing Plate 44536-0751 Mounting Bracket for CM-S3 44536-0800 Select models are available for Rapid Delivery. Mounting Brackets can be used with ✎ Universal this product. See page G-210 for details. Visit this product on www.sti.com for details. G-74 www.sti.com/info Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron objects to any terms or conditions proposed in Buyer’s purchase order or other documents which are inconsistent with, or in addition to, these Terms. 2. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. Payments for Products are due net 30 days unless otherwise stated in the invoice. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Omron’s payment terms and (ii) Buyer has no past due amounts. 4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 5. Orders. Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Products. 7. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Omron. 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Omron, Omron reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 10. Force Majeure. Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship except in “break down” situations. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid; d. Delivery and shipping dates are estimates only; and e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims. Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed. 13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- 14. 15. 16. 17. 18. ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron247.com or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and their employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it in any way without the written permission of Omron. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Omron. All information and materials supplied by Omron to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. Export Controls. Buyer shall comply with all applicable laws, regulations and licenses regarding (i) export of products or information; (iii) sale of products to “forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of regulated technology or information. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right and no course of dealing between Buyer and Omron shall operate as a waiver of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder without Omron's written consent. (c) Law. These Terms are governed by the law of the jurisdiction of the home office of the Omron company from which Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between Buyer and Omron relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (g) Definitions. As used herein, “including” means “including without limitation”; and “Omron Companies” (or similar words) mean Omron Corporation and any direct or indirect subsidiary or affiliate thereof. Certain Precautions on Specifications and Use 1. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO 2. 3. 4. 5. ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com OMRON CANADA, INC. • HEAD OFFICE Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com OMRON ARGENTINA • SALES OFFICE Cono Sur • 54.11.4783.5300 OMRON ELECTRONICS DE MEXICO • HEAD OFFICE México DF • 52.55.59.01.43.00 • 01-800-226-6766 • mela@omron.com OMRON CHILE • SALES OFFICE Santiago • 56.9.9917.3920 OMRON ELECTRONICS DE MEXICO • SALES OFFICE Apodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • mela@omron.com OTHER OMRON LATIN AMERICA SALES 54.11.4783.5300 OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu Authorized Distributor: Automation Control Systems • Machine Automation Controllers (MAC) • Programmable Controllers (PLC) • Operator interfaces (HMI) • Distributed I/O • Software Drives & Motion Controls • Servo & AC Drives • Motion Controllers & Encoders Temperature & Process Controllers • Single and Multi-loop Controllers Sensors & Vision • Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors • Amplified Photomicrosensors • Measurement Sensors • Ultrasonic Sensors • Vision Sensors Industrial Components • RFID/Code Readers • Relays • Pushbuttons & Indicators • Limit and Basic Switches • Timers • Counters • Metering Devices • Power Supplies Safety • Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety Controllers • Light Curtains • Safety Relays • Safety Interlock Switches C42I-E-01 08/14 Note: Specifications are subject to change. Printed on recycled paper. © 2014 Omron Electronics LLC Printed in U.S.A.