CP1W-ETN01-US

CP1W-ETN01-US CP1 Ethernet Adapter Low Cost Ethernet Adapter for CP1 Series Micro PLCs The CP1W-ETN01-US is a low cost adapter that allows Ethernet communications to the CP1H and CP1L PLCs with an available option board slot. Easily connect the PLC to a NS HMI, Data Acquisition Software or CX-Programmer via Ethernet communications. Key Features and Benefits • • • • • Easy Mounting – The adapter mounts in an unused Option Board Slot of the CP1 PLC Supports 2 connections – The CP1W-ETN01-US has been designed to allow 2 simultaneous Ethernet connections. An HMI (NS, NSJ, Indusoft) as well as a CX Programmer can communicate to a CP1H or CP1L with the adapter. Remote Maintenance – Perform remote maintenance via an Intranet or the Internet for remote diagnostics to maximize production up-time and reduce operating and maintenance costs. Data Acquisition – Use Indusoft or CX-Supervisor to easily monitor, control & store production data, alarms, recipes, messages from the PLC for improving product quality. Intelligent Slave – Each PLC is a powerful motion controller* (CP1H - 4 Axis, CP1L – 2 Axis) with high speed interrupts, Real Time Clock, IEC61131-3 Programming, PID, Floating Point Math and is expandable with analog or digital I/O. The addition of an Ethernet option board turns the PLC into an Intelligent Slave. *Transistor models Typical System Configuration NS HMI PLC Programming tool or Data Acquisition Package CP1H PLC W4S Ethernet Switch Intelligent Ethernet Slave In the above example the CP1H PLC communicates to the NS HMI via Ethernet. The PLC can control 4 axis of servo motors while also reading 4 high speed encoder inputs. An additional option port can be added for communications to AC Drives, Temperature Controllers, or other devices. Built into the CPU are 24 Digital In, 16 Digital Out and 6 Analog I/O (4 configurable analog inputs & 2 configurable analog outputs). The PLC is expandable up to 320 digital I/O along with 2 CJ Special I/O modules (Analog, Motion, RFID, Network or Communication cards). Specification Part Number CP1W-ETN01-US Type Applicable PLCs Transmission Distance Number of units mounted Communication Method Maximum connections per device Number of nodes on FINS network FINS Frame Length Default IP Address Web Page IP Address Set-up Description CP1 Ethernet Adapter 100Base-TX (Can be used as 10Base-T) CP1L-L14, CP1L-L20, CP1L-M30, CP1L-M40, CP1L-M60, CP1H 100 m (distance between hub and node) Two (both option ports can be used) (One for CP1L-L14,CP1L-L20) Omron FINS Two connections (ie: CX-Programmer and NS HMI) Up to 252 nodes possible 500 bytes max 192.168.250.11 http://192.168.250.11 (Default) Additional literature can be obtained from www.omron247.com. W450 - CP1H Operation Manual W451 - CP1L / CP1H Programming Manual W462 - CP1L Operation Manual W452 - NSJ Operation Manual V227 - W4S Ethernet Switch OMRON ELECTRONICS LLC • THE AMERICAS HEADQUARTERS Schaumburg, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com OMRON CANADA, INC. • HEAD OFFICE OMRON ARGENTINA • SALES OFFICE Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com Cono Sur • 54.11.4783.5300 OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE OMRON CHILE • SALES OFFICE São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br Santiago • 56.9.9917.3920 OMRON ELECTRONICS MEXICO SA DE CV • HEAD OFFICE OTHER OMRON LATIN AMERICA SALES Apodaca, N.L. • 52.811.156.99.10 • 001.800.556.6766 • mela@omron.com 54.11.4783.5300 Cat. No. P060I-E-01 09/09 © 2009 Omron Electronics LLC Specifications are subject to change without notice.