CS1W-CN114

Table of Contents Name Page Number PLC Connections Cable Solutions for Omron PLCs Cable Solutions for Multi-Vendor PLCs i 1 11 15 Reference Information PLC Connections The following pages illustrate the cabling options for connecting Omron programmable controllers with computers, Omron's HMIs, hand-held programmers, high-density I/O modules and I/O terminal blocks. Hand-held Programmers and CPM1A, CPM2A, SRM1 Peripheral Port CPM1A CPM2A SRM1 C200H-CN222 (2 m) C200H-CN422 (4 m) CQM1-PRO01-E C200H-PRO27-E 1 Reference Information Hand-held Programmers and CQM1H Peripheral Port CQM1H CS1W-CN224 (2 m) CS1W-CN624 (6 m) CQM1H-PRO01-E C200H-PRO27-E CS1W-CN114 (5 cm) CQM1-PRO01-E 2 CS1W-CN114 (5 cm) C200H-CN222 (2 m) C200H-CN422 (4 m) C200H-PRO27-E Reference Information Hand-held Programmer and CPM2C Communication Port CPM2C CS1W-CN114 (5 cm) CQM1H-PRO01-E CS1W-CN224 (2 m) CS1W-CN624 (6 m) CS1W-KS001-E Key Sheet (supplied with CQM1-PRO01-E) CQM1-PRO01-E CS1W-KS001-E Key Sheet (supplied with C200H-PRO27-E) C200H-PRO27-E 3 Reference Information CQM1H and PC CQM1H To peripheral port on the CPU: CS1W-CN226 (2 m), CS1W-CN626 (6 m) CS1W-CN118 (10 cm) C200HS-CN220-EU (2 m) CS1W-CN114 (5 cm) CQM1-CIF02 PC To serial port on the CPU or Inner Board: C200HS-CN220-EU Program Download Cable C200H-CN320-EU Communication Cable CPM2C and PC CS1W-CN226 (2 m), CS1W-CN626 (6 m) CPM2C CS1W-CN118 (10 cm) C200HS-CN220-EU (2 m) CS1W-CN114 (5 cm) CQM1-CIF02 CPM2C-CN111 (15 cm) HMI 4 CQM1-PRO01-E, etc. PC Reference Information CPM2C + Serial Communication Adapter and PC CPM2C- CPM2C CIF01 CPU Unit CPM2C-CIF11 for Multi-drop RS-422/RS-485 CPM2C- CPM2C CIF11 CPU Unit PC C200HS-CN220-EU CS1W-CN226 (2 m), CS1W-CN626 (6 m) NT2S Message Display and Programmable Controllers Peripheral port (Old type: C200H, SRM1, CPM2A, CPM1A, CPM2B*) *Note: CPM2B must use CS1W-CN114 adapter. NT2S-SF121 NT2S-CN212 (2 m) NT2S-CN215 (5 m) NT2S-SF122/123 NT2S-CN222-V1 (2 m) NT2S-CN225-V1 (5 m) NT2S-SF121 Peripheral port (New type: CS1, CQM1H, CPM2C) NT2S-CN223 (2 m) NT2S-SF122/123 NT2S-CN224 (2 m) 5 Reference Information CPM2C CPU and Expansion I/O + XW2B/XW2C 20-pin Screw Terminal Blocks CPM2C Connector type CPM2C-
C(1)DTC-D CPU Units with 16 pt DC IN/16 pt NPN OUT CPM2C-
E(D)TC Expansion I/O Modules with 16 pt DC IN/16 pt NPN OUT OUTPUT 2 cables are required for each module XW2Z-50A (0.5 m) XW2Z-100A (1 m) XW2Z-150A (1.5 m) XW2Z-200A (2 m) XW2Z-300A (3 m) XW2Z-500A (5 m) XW2B-20G4 INPUT XW2C-20G5-IN16 Dedicated input screw terminal block 6 XW2B-20G5 XW2B-20G4 Reference Information CPM2C CPU and Expansion I/O + G70A, G70D Relay I/O Blocks CPM2C Connector type CPM2C-
C(1)DTC-D CPU Units with 16 pt DC IN/16 pt NPN OUT CPM2C-
E(D)TC Expansion I/O Modules with 16 pt DC IN/16 pt NPN OUT G70D-VSOC16 OUTPUT 2 cables are required for each module G79-100C (1 m) G79-150C (1.5 m) G79-200C (2 m) G79-300C (3 m) G79-500C (5 m) G70A-ZOC16-3 + G2R-1-S(N) relays INPUT G70A-ZOC16-3 + G2R-1-S(N) relays G70D-SOC16 CQM1H 16-point PNP Output Module + G70A Relay I/O Block CQM1-OD214 (16 PNP outputs) G79-Y100C G79-Y150C G79-Y200C G79-Y300C G79-Y500C (1 m) (1.5 m) (2 m) (3 m) (5 m) G70A-ZOC16-4 + G2R-1-S(N) relays 7 Reference Information CQM1H High-Density I/O Modules + XW2B Screw Terminal Blocks CQM1H 32-Point I/O Modules XW2Z-50B (0.5 m) XW2Z-100B (1 m) XW2Z-150B (1.5 m) XW2Z-200B (2 m) XW2Z-300B (3 m) XW2Z-500B (5 m) CQM1-ID213 (32 NPN inputs) CQM1-ID214 (32 NPN inputs) CQM1-OD213 (32 NPN outputs) CQM1-OD216 (32 PNP outputs) XW2B-40G5 XW2B-40G4 8 Reference Information CQM1H High-Density Input Modules + XW2C Input Screw Terminal Blocks CQM1H 32-Point Input Modules 1 - 1.5 - 2 - 3 - 5 m 0.75 - 1.25 - 1.75 - 2.75 - 4.75 m CQM1-ID213 (32 NPN inputs) CQM1-ID214 (32 NPN inputs) XW2Z-100D XW2Z-150D XW2Z-200D XW2Z-300D XW2Z-500D (1 m + 0.75 m) (1.5 m + 1.25 m) (2 m + 1.75 m) (3 m + 2.75 m) (5 m + 4.75 m) XW2C-20G5-IN16 XW2C-20G5-IN16 9 Reference Information CQM1H High-Density Output Modules + Output Relay Blocks CQM1 1 - 1.5 - 2 - 3 - 5 m .75 - 1.25 - 1.75 - 2.75 - 4.75 m CQM1-OD213 (32 NPN outputs) G79-O100C-75 (1 m + 0.75 m) G79-O150C-125 (1.5 m+ 1.25 m) G79-O200C-175 (2 m+ 1.75 m) G79-O300C-275 (3 m+ 2.75 m) G79-O500C-475 (5 m+ 4.75 m) G70D-VSOC16 G7TC-OC16 Relay Block or P7TF-OS16 Block Base with G7T-1112S Relays or G3TA-ODX02S SSRs 10 G70A-ZOC16-3 + G2R-1-S(N) relays G70D-SOC16 Cable Solutions for Omron PLCs Operator Interface Terminals and CPM1A/CPM2A Peripheral Port CPM1A Serial Port Peripheral Port C200H-CN__0-EU NT31C-CN__0-EU (for NT31C Port B only) NT11S NT20S / 600S NT21 / 31 / 631 CPM1-CIF01 CPM2A Serial Port Operator Interface Terminals and CPM2C PLC Serial C200H-CN__0-EU NT31C-CN__0-EU (for NT31C Port B only) Port CPM2CCIF01 CS1W-CN118 CPM2C-CN111 Peripheral Port XW2Z-200T-2 XW2Z-500T-2 (Recommended Cable) NT11S NT20S / 600S NT21 / 31 / 631 CPM2C 11 Cable Solutions for Omron PLCs Operator Interface Terminals and CPM2B PLC CS1W-CN118 C200H-CN__0-EU NT31C-CN__0-EU (for NT31C Port B only) Peripheral Port Serial Port XW2Z-200T-2 XW2Z-500T-2 (Recommended Cable) CPM2B NT11S NT20S / 600S NT21 / 31 / 631 Operator Interface Terminals and CQM1H PLC CS1W-CN118 C200H-CN__0-EU NT31C-CN__0-EU (for NT31C Port B only) Peripheral Port Serial Port Expansion Serial Port XW2Z-200T-2 XW2Z-500T-2 CQM1H 12 NT11S NT20S / 600S NT21 / 31 / 631 Cable Solutions for Omron PLCs Operator Interface Terminals and CJ1 PLC CS1W-CN118 Peripheral Port RS232C Serial Modules C200H-CN__0-EU NT31C-CN__0-EU (for NT31C Port B only) Serial Port XW2Z-200T-2 XW2Z-500T-2 CJ1 NT11S NT20S / 600S NT21 / 31 / 631 Operator Interface Terminals and CS1 PLC CS1W-CN118 RS232C Serial Modules RS232C Serial Inner Board C200H-CN__0-EU NT31C-CN__0-EU (for NT31C Port B only) CS1 Serial Port XW2Z-200T-2 XW2Z-500T-2 NT11S NT20S / 600S NT21 / 31 / 631 13 Cable Solutions for Omron PLCs NT2S Message Display and Programmable Controllers Peripheral port (Old type: C200H, SRM1, CPM2A, CPM1A) NT2S-SF121 NT2S-CN212 (2 m) NT2S-CN215 (5 m) NT2S-SF122/123 NT2S-CN222-V1 (2 m) NT2S-CN225-V1 (5 m) NT2S-SF121 Peripheral port (New type: CJ1, CS1, CQM1H, CPM2C) NT2S-CN223-V1 (2 m) NT2S-SF122/123 NT2S-CN224-V1 (2 m) NT2S Custom Cables Any Omron PLC Serial Port RS232C NT2S-SF121 Male DB9 Metric Threads 2.6 mm TXD RXD GROUND Any Omron PLC Serial Port RS232C Male DB9 Metric Threads 2.6 mm TXD RXD GROUND 5 VDC 14 Male DB9 Create custom cable 2 3 1 9 4 5 2 3 9 6 1 4 5 SHIELD 2 3 5 9 TXD English Threads 4-40 screw RXD GROUND (Purchase Omron’s C200H-CN32O-EU and short pins 5 and 9 on NT side as shown) Female DB9 SHIELD 2 3 4 5 7 GROUND TXD NT2S-SF122 English Threads 4-40 screw VOLT IN (5 VDC) GROUND RXD (232) Custom Cable Ordering Information Description Metric thread shell and screws - 2.6 mm English thread shell and screws - 4-40 screw Male connector Female connector Part Number XM2S-0911 XM2S-0913 XM2A-0901 XM2D-0901 Cable Solutions for Multi-Vendor PLCs Allen Bradley MicroLogix 1200 An alternative cable configuration uses a custom RS-232 9-to-9 PIN cable connecting to the Allen-Bradley 1767-CBL-PM02(Series C). The diagram below shows the pinouts for the custom RS-232 cable: Connects to Omron NT Connects to AB 1761 Cable DCD RXD TXD DTR GROUND DSR RTS CTS RI 9 Pin Male DB9 Connector -1 TXD -2 RXD -3 -4 -5 -6 -7 -8 GROUND -9 9 Pin Male DB9 Connector 123456789- AB 1761-CBL-PM02 (Series C) AB MicroLogix 1200 Communication Cables 1761-CBL-PM02(Series C) DB9 to 8 pin mini-din connector (order from AB) Allen Bradley SLC 5/02 Communicates via AB’s DF1 protocol. This PLC comes with only a DH-485 port. The Allen-Bradley 1747-KE module must be purchased to provide a serial connection on the SLC 5/02. Connect the communication cable from the NT to the serial port on the 1747-KE module. AB SLC 5/02 1747-KE RS232 DH-485 NT631C-CN321-EU DH-485 NT31 (Port A) NT631 (Port A or B) 1747-C13 Allen Bradley SLC 5/00, 5/01, 5/02 This cable can only be used in 1:1 connection with DH485 port. NT31C-CN321-EU AB SLC 5/00, 5/01, 5/02 NT31 (Port B) DH-485 NT631C-CN221-485 NT31 (Port A) NT631 (Port A or B) NT631C-CN221-485 AB SLC 5/02 Communication Cables and Accessories NT31C-CN321-EU NT31 (Port A) 3.0 m cable, 25 to 9 pin, NT to AB SLC PLC NT631C-CN321-EU 3.0 m cable, 9 to 9 pin, NT to AB SLC PLC 1747-KE DB9 Serial Port Module (order from AB) 1747-C13 DH-485 module connection cable V060-E1-2 Operation Manual – Multi-vendor Connection 15 Cable Solutions for Multi-Vendor PLCs Allen Bradley SLC 5/03, 5/04, 5/05 Communicates via AB’s DF1 protocol. Connect the communication cable from the NT to a serial port on the PLC using Omron cable part numbers. AB SLC 5/03, 5/04, 5/05 DF1 RS232 NT631C-CN321-EU NT31 (Port A) NT631 (Port A or B) Allen Bradley SLC 5/03, 5/04, 5/05 NT31C-CN321-EU This cable can only be used in 1:1 connection with DH485 port. NT31 (Port B) AB SLC 5/03, 5/04, 5/05 DH-485 NT631C-CN211-485 NT31 (Port A) NT631 (Port A or B) NT631C-CN211-485 NT31 (Port A) AB SLC 5/02 Communication Cables and Accessories NT31C-CN321-EU 3.0 m cable, 25 to 9 pin, NT to AB SLC PLC NT631C-CN321-EU 3.0 m cable, 9 to 9 pin, NT to AB SLC PLC V060-E1-2 Operation Manual – Multi-vendor Connection GE 90-20 and 90-30 Series PLCs Communicates via GE’s SNP-X protocol. The Omron NT is communicating RS-232, while the GE PLC uses RS-422. An RS232 to RS422 converter (HE693SNP232A) is needed to complete communications. GE 90-20 and 90-30 Series SNP NT631C-CN322-EU NT31 (Port A) NT631 (Port A or B) HE693SNP232A NT31C-CN322-EU GE 90-20 and 90-30 Series Communication Cables and Accessories 16 NT31C-CN322-EU 3.0 m cable, 25 to 9 pin, NT to GE PLC NT631C-CN322-EU 3.0 m cable, 9 to 9 pin, NT to GE PLC HE693SNP232A RS232 to RS422 adapter (order from GE) V060-E1-2 Operation Manual – Multi-vendor Connection NT31 (Port B) Cable Solutions for Multi-Vendor PLCs Siemens S7-300 and S7-400 Series PLCs Communicates with Siemens HMI Adapter protocol. The Omron NT is communicating RS-232 to the Siemens HMI adapter, 6E57-972-OCA10-OXAO. The adapter is necessary to convert the HMI Adapter protocol into the Siemens proprietary MPI protocol. Siemens S7-300 and S7-400 Series MPI NT631C-CN323-EU NT31 (Port A) NT631 (Port A or B) 6E57-972-0CA10-OXAO NT31C-CN323-EU Siemens S7-300 and S7-400 Communication Cables and Accessories NT31C-CN323-EU 3.0 m cable, 25 to 9 pin, NT to Siemens PLC NT631C-CN323-EU 3.0 m cable, 9 to 9 pin, NT to Siemens PLC 6E57-972-OCA10-OXAO HMI Adapter for MPI protocol (order from Siemens) V060-E1-2 Operation Manual – Multi-vendor Connection NT31 (Port B) Mitsubishi A-Series PLCs Communicates using Mitsubishi’s Computer Link protocol. The Omron NT and the Mitsubishi A-Series PLC are communicating using RS-232 communications. Communications can be RS-422 by using custom cables as specified in Operation Manual V042-E1-1. Mitsubishi A-Series NT631C-CN324-EU NT31 (Port A) NT631 (Port A or B) Computer Link Module NT31C-CN324-EU Mitsubishi A-Series Communication Cables and Accessories NT31C-CN324-EU 3.0 m cable, 25 to 9 pin, NT to Mits-A PLC NT631C-CN324-EU 3.0 m cable, 9 to 9 pin, NT to Mits-A PLC V042-E1-1 Operation Manual – PC (Mitsubishi) Connection NT31 (Port B) 17 Cable Solutions for Multi-Vendor PLCs Mitsubishi FX-Series PLCs Communicates via Mitsubishi’s Computer Link protocol. The Omron NT and Mitsubishi FX-Series PLC are communicating using RS422 communications. The NT31 cable connects from the 25-pin port B, while the NT631 connects from the RS422 terminal screws for Port B. Mitsubishi FX-Series NT631C-CN325-EU NT631 (Port B Terminal Strip) 25 Pin Connector RS422 NT31C-CN325-EU NT31 (Port B) Mitsubishi A-Series Communication Cables and Accessories NT31C-CN325-EU 3.0 m cable, 25 to 25 pin, NT to Mits-FX PLC NT631C-CN325-EU 3.0 m cable, 4 Wires to 25 pin, NT to Mits-FX PLC FX-20P-CADP Cable for FX0 & FX0N PLC (buy from Mitsubishi) V042-E1-1 Operation Manual – PC (Mitsubishi) Connection Modicon TSX Micro 37-21/22 & Premium Series PLCs For RS-232C connection: PLC Side (TSX SCP CD 1030) Omron NT Side 3 2 5 4 7 2 SD 3 RD RXD TXD CTS RTS SG TSX SCP111 9 Pin Male Metric Thread PLC Side (TSX SCP CD 1030) Omron NT Side 3 2 5 4 7 2 SD 3 RD RXD TXD CTS RTS SG 25 Pin Female Modicon TSX Series Communication Cables and Accessories 18 9 SG 25 Pin Female TSX SCP CD 1030 TSX SCP111 Multi-protocol PCMCIA card for RS-232C TSX SCP114 Multi-protocol PCMCIA card for RS-422A TSX SCP CD 1030 Connecting cable for PCMCIA for RS-232C TSX SCP CM 4030 Connecting cable for PCMCIA for RS-422A NT31 (Port A) NT631 (Port A or B) 7 SG 25 Pin Male Metric Thread NT31 (Port B) Cable Solutions for Multi-Vendor PLCs Modicon TSX Micro 37-21/22 & Premium Series PLCs For RS-422A connection: PLC Side (TSX SCP CX 4030) Orange/White White/Orange White/Green Green/White Omron NT Side NT631 (Port B Terminal Strip) SDB(+) SDA(-) RDB(+) RDA(-) Brown/White Terminal TSX SCP114 TSX SCP CM 4030 PLC Side (TSX SCP CX 4030) Omron NT Side Orange/White 11 SDB(+) White/Orange 15 SDA(-) White/Green 10 RDB(+) Green/White 16 RDA(-) NT31 (Port B) Brown/White 25 Pin Male Metric Thread Modicon TSX Quantum Series PLCs For RS-232C connection: PLC Side Shield RXD TXD DTR GND DSR RTS CTS 1 2 3 4 5 6 7 8 9 PLC Side Shield RXD TXD DTR GND DSR RTS CTS 1 2 3 4 5 6 7 8 9 Omron NT Side 1 2 TXD 3 RXD 4 5 6 7 8 9 GND 9 Pin Male Metric Thread Omron NT Side 1 2 TXD 3 RXD 4 5 6 7 GND 25 Pin Male NT31 (Port A) NT631 (Port A or B) NT31 (Port B) 19 OMRON ELECTRONICS LLC 1 Commerce Drive Schaumburg, IL 60173 USA 800.55.OMRON (66766) OMRON CANADA, INC. 885 Milner Avenue Scarborough, Ontario M1B 5V8 416.286.6465 OMRON ON-LINE Global - http://www.omron.com USA - http://www.omron.com/oei Canada - http://www.omron.com/oci ©2002 OMRON ELECTRONICS LLC Printed in the U.S.A. Specifications subject to change without notice.