D2HW-BR231DR

D2HW Sealed Ultra Subminiature Basic Switch Smallest sealed snap-action switch in the industry with a very long stroke for reliable ON/OFF action O The case dimensions are 78% of conventional models, contributing to down-sizing of mechanical modules. O Extra-long stroke even without levers. (OT reference value: 1.4 mm). O Made of environmentally-friendly materials. All models are lead-free, including molded lead wire models. D 2 H W RoHS Compliant Model Number Legend 1 2 3 4 5-6-7 D2HW -  1. Mounting Structure A : Without posts (base-mounting) BR : Long post on right BL : Long post on left C : M3-screw mounting models ER : Short post on right EL : Short post on left 2. Raitings 2 : 5 VDC 1mA to 12 VDC 2A 3. Actuator 0 : Pin plunger 1 : Hinge lever 2 : Long hinge lever 3 : Simulated roller lever 4 : Hinge roller lever 5 : Straight leaf lever 6 : Leaf lever 7 : Simulated roller leaf lever 8 : Long leaf lever 4. Contact form 1 : SPDT 2 : SPST-NC (Molded lead wire models only) 3 : SPST-NO (Molded lead wire models only) 5. Terminals D, DS : DR, DRS : DL, DLS : H, HS : M, MS : MR, MRS : ML, MLS : PCB terminals (Straight) PCB Terminals (Right-angled) PCB Terminals (Left-angled) Solder terminals Molded lead wires downwards Molded lead wires on right-side Molded lead wires on left-side Note. UL/cUL approved versions are available. In this case, a "S" will be added to the end of the model number. The Lead wire is a UL approved wire (AWG24, UL1007). 6. Special Specification 7. Special Industry Specification 1 D2HW Sealed Ultra Subminiature Basic Switch List of Models OPCB-mounted Models List of Models Long post on right Actuator Terminals Pin plunger Hinge lever D 2 H W Long hinge lever For PCB Contact form Straight - - Angled D2HW-BR201DR D2HW-ER201DR Straight - - Angled D2HW-BR211DR D2HW-ER211DR Straight SPDT Angled Simulated roller hinge lever - - D2HW-BR221DR D2HW-ER221DR Straight - - Angled D2HW-BR231DR D2HW-ER231DR List of Models Long post on left Actuator Terminals Pin plunger Hinge lever Long hinge lever Simulated roller hinge lever For PCB Short post on right Contact form Short post on left Without posts Straight - - Angled D2HW-BL201DL D2HW-EL201DL Straight - - D2HW-BL211DL D2HW-EL211DL - - Angled D2HW-BL221DL D2HW-EL221DL Straight - - Angled Straight SPDT D2HW-BL231DL D2HW-EL231DL Angled Note1. Angled terminals and posts are the same direction. Note2. "S" is added to the end of the model number for the UL/cUL-approved version Consult your OMRON sales representative for details. 2 D2HW-A201D D2HW-A211D D2HW-A221D D2HW-A231D - D2HW Sealed Ultra Subminiature Basic Switch OModels with Solder Terminals or Molded Lead Wires List of Models Long post on right Actuator Terminals Short post on right Contact form SPDT D2HW-BR201H D2HW-ER201H SPDT D2HW-BR201M D2HW-ER201M Downwards SPST-NC D2HW-BR202M D2HW-ER202M SPST-NO D2HW-BR203M D2HW-ER203M Pin plunger Molded SPST-NC D2HW-BR202MR D2HW-ER202MR lead wires Right-side SPST-NO D2HW-BR203MR D2HW-ER203MR SPST-NC D2HW-BR202ML D2HW-ER202ML Left-side SPST-NO D2HW-BR203ML D2HW-ER203ML Solder SPDT D2HW-BR211H D2HW-ER211H SPDT D2HW-BR211M D2HW-ER211M Downwards SPST-NC D2HW-BR212M D2HW-ER212M SPST-NO D2HW-BR213M D2HW-ER213M Hinge lever Molded SPST-NC D2HW-BR212MR D2HW-ER212MR lead wires Right-side SPST-NO D2HW-BR213MR D2HW-ER213MR SPST-NC D2HW-BR212ML D2HW-ER212ML Left-side SPST-NO D2HW-BR213ML D2HW-ER213ML Solder SPDT D2HW-BR221H D2HW-ER221H SPDT D2HW-BR221M D2HW-ER221M Downwards SPST-NC D2HW-BR222M D2HW-ER222M SPST-NO D2HW-BR223M D2HW-ER223M Long hinge lever Molded SPST-NC D2HW-BR222MR D2HW-ER222MR lead wires Right-side SPST-NO D2HW-BR223MR D2HW-ER223MR SPST-NC D2HW-BR222ML D2HW-ER222ML Left-side SPST-NO D2HW-BR223ML D2HW-ER223ML Solder SPDT D2HW-BR231H D2HW-ER231H SPDT D2HW-BR231M D2HW-ER231M Downwards SPST-NC D2HW-BR232M D2HW-ER232M Simulated roller SPST-NO D2HW-BR233M D2HW-ER233M Molded hinge lever SPST-NC D2HW-BR232MR D2HW-ER232MR lead wires Right-side SPST-NO D2HW-BR233MR D2HW-ER233MR SPST-NC D2HW-BR232ML D2HW-ER232ML Left-side SPST-NO D2HW-BR233ML D2HW-ER233ML Solder SPDT D2HW-BR241H D2HW-ER241H SPDT D2HW-BR241M D2HW-ER241M Downwards SPST-NC D2HW-BR242M D2HW-ER242M Hinge roller SPST-NO D2HW-BR243M D2HW-ER243M Molded lever SPST-NC D2HW-BR242MR D2HW-ER242MR lead wires Right-side SPST-NO D2HW-BR243MR D2HW-ER243MR SPST-NC D2HW-BR242ML D2HW-ER242ML Left-side SPST-NO D2HW-BR243ML D2HW-ER243ML Solder SPDT D2HW-BR251H D2HW-ER251H SPDT D2HW-BR251M D2HW-ER251M Downwards SPST-NC D2HW-BR252M D2HW-ER252M Straight leaf SPST-NO D2HW-BR253M D2HW-ER253M Molded lever SPST-NC D2HW-BR252MR D2HW-ER252MR lead wires Right-side SPST-NO D2HW-BR253MR D2HW-ER253MR SPST-NC D2HW-BR252ML D2HW-ER252ML Left-side SPST-NO D2HW-BR253ML D2HW-ER253ML Solder SPDT D2HW-BR261H D2HW-ER261H SPDT D2HW-BR261M D2HW-ER261M Downwards SPST-NC D2HW-BR262M D2HW-ER262M SPST-NO D2HW-BR263M D2HW-ER263M Leaf lever Molded SPST-NC D2HW-BR262MR D2HW-ER262MR lead wires Right-side SPST-NO D2HW-BR263MR D2HW-ER263MR SPST-NC D2HW-BR262ML D2HW-ER262ML Left-side SPST-NO D2HW-BR263ML D2HW-ER263ML Solder SPDT D2HW-BR271H D2HW-ER271H SPDT D2HW-BR271M D2HW-ER271M Downwards SPST-NC D2HW-BR272M D2HW-ER272M Simulated roller SPST-NO D2HW-BR273M D2HW-ER273M Molded leaf lever SPST-NC D2HW-BR272MR D2HW-ER272MR lead wires Right-side SPST-NO D2HW-BR273MR D2HW-ER273MR SPST-NC D2HW-BR272ML D2HW-ER272ML Left-side SPST-NO D2HW-BR273ML D2HW-ER273ML SPDT D2HW-BR281M D2HW-ER281M Downwards SPST-NC D2HW-BR282M D2HW-ER282M SPST-NO D2HW-BR283M D2HW-ER283M Molded Long leaf lever SPST-NC D2HW-BR282MR D2HW-ER282MR lead wires Right-side SPST-NO D2HW-BR283MR D2HW-ER283MR SPST-NC D2HW-BR282ML D2HW-ER282ML Left-side SPST-NO D2HW-BR283ML D2HW-ER283ML Note1. The length of standard lead wires (AVSS 0.5) for molded lead wire models shown above is 30 cm. Note2. "S" is added to the end of the model number for the UL/cUL-approved version The lead wire models are UL approved wires (AWG24, UL1007). Consult your OMRON sales representative for details. Solder D 2 H W 3 D2HW Sealed Ultra Subminiature Basic Switch OModels with Solder Terminals or Molded Lead Wires List of Models Long post on left Actuator Terminals M3-screw mounting Contact form SPDT D2HW-BL201H D2HW-EL201H D2HW-C201H SPDT D2HW-BL201M D2HW-EL201M D2HW-C201M Downwards SPST-NC D2HW-BL202M D2HW-EL202M D2HW-C202M SPST-NO D2HW-BL203M D2HW-EL203M D2HW-C203M Pin plunger Molded SPST-NC D2HW-BL202MR D2HW-EL202MR D2HW-C202MR lead wires Right-side SPST-NO D2HW-BL203MR D2HW-EL203MR D2HW-C203MR SPST-NC D2HW-BL202ML D2HW-EL202ML Left-side SPST-NO D2HW-BL203ML D2HW-EL203ML Solder SPDT D2HW-BL211H D2HW-EL211H D2HW-C211H SPDT D2HW-BL211M D2HW-EL211M D2HW-C211M Downwards SPST-NC D2HW-BL212M D2HW-EL212M D2HW-C212M SPST-NO D2HW-BL213M D2HW-EL213M D2HW-C213M Hinge lever Molded SPST-NC D2HW-BL212MR D2HW-EL212MR D2HW-C212MR lead wires Right-side SPST-NO D2HW-BL213MR D2HW-EL213MR D2HW-C213MR SPST-NC D2HW-BL212ML D2HW-EL212ML Left-side SPST-NO D2HW-BL213ML D2HW-EL213ML Solder SPDT D2HW-BL221H D2HW-EL221H D2HW-C221H SPDT D2HW-BL221M D2HW-EL221M D2HW-C221M Downwards SPST-NC D2HW-BL222M D2HW-EL222M D2HW-C222M SPST-NO D2HW-BL223M D2HW-EL223M D2HW-C223M Long hinge lever Molded SPST-NC D2HW-BL222MR D2HW-EL222MR D2HW-C222MR lead wires Right-side SPST-NO D2HW-BL223MR D2HW-EL223MR D2HW-C223MR SPST-NC D2HW-BL222ML D2HW-EL222ML Left-side SPST-NO D2HW-BL223ML D2HW-EL223ML Solder SPDT D2HW-BL231H D2HW-EL231H D2HW-C231H SPDT D2HW-BL231M D2HW-EL231M D2HW-C231M Downwards SPST-NC D2HW-BL232M D2HW-EL232M D2HW-C232M Simulated roller SPST-NO D2HW-BL233M D2HW-EL233M D2HW-C233M Molded hinge lever SPST-NC D2HW-BL232MR D2HW-EL232MR D2HW-C232MR lead wires Right-side SPST-NO D2HW-BL233MR D2HW-EL233MR D2HW-C233MR SPST-NC D2HW-BL232ML D2HW-EL232ML Left-side SPST-NO D2HW-BL233ML D2HW-EL233ML Solder SPDT D2HW-BL241H D2HW-EL241H D2HW-C241H SPDT D2HW-BL241M D2HW-EL241M D2HW-C241M Downwards SPST-NC D2HW-BL242M D2HW-EL242M D2HW-C242M Hinge roller SPST-NO D2HW-BL243M D2HW-EL243M D2HW-C243M Molded lever SPST-NC D2HW-BL242MR D2HW-EL242MR D2HW-C242MR lead wires Right-side SPST-NO D2HW-BL243MR D2HW-EL243MR D2HW-C243MR SPST-NC D2HW-BL242ML D2HW-EL242ML Left-side SPST-NO D2HW-BL243ML D2HW-EL243ML Solder SPDT D2HW-BL251H D2HW-EL251H D2HW-C251H SPDT D2HW-BL251M D2HW-EL251M D2HW-C251M Downwards SPST-NC D2HW-BL252M D2HW-EL252M D2HW-C252M Straight leaf SPST-NO D2HW-BL253M D2HW-EL253M D2HW-C253M Molded lever SPST-NC D2HW-BL252MR D2HW-EL252MR D2HW-C252MR lead wires Right-side SPST-NO D2HW-BL253MR D2HW-EL253MR D2HW-C253MR SPST-NC D2HW-BL252ML D2HW-EL252ML Left-side SPST-NO D2HW-BL253ML D2HW-EL253ML Solder SPDT D2HW-BL261H D2HW-EL261H D2HW-C261H SPDT D2HW-BL261M D2HW-EL261M D2HW-C261M Downwards SPST-NC D2HW-BL262M D2HW-EL262M D2HW-C262M SPST-NO D2HW-BL263M D2HW-EL263M D2HW-C263M Leaf lever Molded SPST-NC D2HW-BL262MR D2HW-EL262MR D2HW-C262MR lead wires Right-side SPST-NO D2HW-BL263MR D2HW-EL263MR D2HW-C263MR SPST-NC D2HW-BL262ML D2HW-EL262ML Left-side SPST-NO D2HW-BL263ML D2HW-EL263ML Solder SPDT D2HW-BL271H D2HW-EL271H D2HW-C271H SPDT D2HW-BL271M D2HW-EL271M D2HW-C271M Downwards SPST-NC D2HW-BL272M D2HW-EL272M D2HW-C272M Simulated roller SPST-NO D2HW-BL273M D2HW-EL273M D2HW-C273M Molded leaf lever SPST-NC D2HW-BL272MR D2HW-EL272MR D2HW-C272MR lead wires Right-side SPST-NO D2HW-BL273MR D2HW-EL273MR D2HW-C273MR SPST-NC D2HW-BL272ML D2HW-EL272ML Left-side SPST-NO D2HW-BL273ML D2HW-EL273ML SPDT D2HW-BL281M D2HW-EL281M D2HW-C281M Downwards SPST-NC D2HW-BL282M D2HW-EL282M D2HW-C282M SPST-NO D2HW-BL283M D2HW-EL283M D2HW-C283M Molded Long leaf lever SPST-NC D2HW-BL282MR D2HW-EL282MR D2HW-C282MR lead wires Right-side SPST-NO D2HW-BL283MR D2HW-EL283MR D2HW-C283MR SPST-NC D2HW-BL282ML D2HW-EL282ML Left-side SPST-NO D2HW-BL283ML D2HW-EL283ML Note1. The length of standard lead wires (AVSS 0.5) for molded lead wire models shown above is 30 cm. Note2. "S" is added to the end of the model number for the UL/cUL-approved version The lead wire models are UL approved wires (AWG24, UL1007). Consult your OMRON sales representative for details. Solder D 2 H W Short post on left 4 D2HW Sealed Ultra Subminiature Basic Switch Contact form O SPST-NC, (Molded Lead Wire Models Only) OSPDT COM (Black) NO NC (Blue) (Red) COM (Black) Contact Specifications Contact NC (Red) COM NO (Black) (Blue) Crossbar Permissible operating speed Material Gold alloy Permissible operating frequency Gap (standard value) 0.5 mm Minimum applicable load (see note) 5 VDC 1mA Ratings Rated voltage Resistive load 125 VAC 0.1A 12 VDC 24 VDC 42 VDC 2A 1A 0.5A Note. The above rating values apply under the following test conditions. (1) Ambient temperature: 20±2°C (2) Ambient humidity: 65±5 % (3) Operating frequency: 30 operations/min Approved Safety Standard Item Insulation resistance Contact resistance (initial value) Dielectric strength D 2 H W Shock resistance D2HW Resistive load 100 VAC 0.1A 12 VDC 2A 24 VDC 1A 42 VDC 0.5A Degree of protection 30 operations/min 100 MΩ min. (at 500 VDC with insulation tester) 100 mΩ max. Molded lead wire models 150 mΩ max. Between terminals of the same polarity 600 VAC 50/60 Hz 1min Between current-carrying metal parts and ground 1,500 VAC 50/60 Hz 1 min Between terminals and non-current-carrying metal parts 1,500 VAC 50/60 Hz 1 min Durability Malfunction * 1 Mechanical 10 to 55 Hz, 1.5 mm double amplitude 1,000 m/s2 {approx. 100G} max. 300 m/s2 {approx. 30G} max. 1,000,000 operations min. (30 operations/min) Electrical 100,000 operations min. (20 operations/min) Terminals IEC IP67 (excluding the terminals on terminal models) molded lead wire models Ambient operating temperature Ambient operating humidity Weight 1 mm to 500 mm/s (for pin plunger models) Terminals Vibration Malfunction resistance * 1 Durability * 2 Consult your OMRON sales representative for specific models with standard approvals. UL (UL61058-1/cUL C22.2 No.61058-1) Rated voltage Molded lead wire colors are indicated in parentheses. Characteristics Specification Model O SPST-NO, (Molded Lead Wire Models Only) IEC IP67 -40 to +85°C (at ambient humidity of 60% max.) (with no icing or condensation) 95% max. (for +5 to +35°C) Approx. 0.7 g (for pin plunger models with terminals) Note. The data given above are initial values. *1. For the pin plunger models, the above values apply for use at the free position, operating position, and total travel position. For the lever models, they apply at the total travel position. Close or open circuit of the contact is 1ms max. *2. For testing conditions, consult your OMRON sales representative. 5 D2HW Sealed Ultra Subminiature Basic Switch Mounting Structure and Reference Positions for Operating Characteristics (Unit: mm) OWithout posts D2HW-A@ OLong post D2HW-B@ OM3-screw Mounting Models D2HW-C@ 2.65 8r0.1 1.7 dia. 4 1.7 dia. 13r0.1 0 3 -0.1 dia. FP OP FP OP TTP 7 TTP Standard Position FP OP 2.6r0.05 3 6 6.5 Standard Position 6.5 3.10.13 -0.03 Standard Position D 2 H W 13.3 0 5 -0.2 13.3 5.3 3.3r0.15 dia. TTP 5.3 Mounting Hole Dimensions (Reference) 2.40.1 0 dia. holes (depth: D2HW-E: 1.5 mm min. D2HW-B: 5 mm min.) 18.5 0 1.5 -0.1 5.3 0 1.5 -0.1 Mounting Hole Dimensions (Reference) 30.1 0 dia. holes (depth: 1.5 mm min.) M3 Tap 2.6 2.40.1 0 13r0.1 8r0.1 OShort post D2HW-E@ 8r0.1 1.7 dia. FP OP 2.6r0.05 TTP 3 6.5 13.3 1.5 +0 -0.2 5.3 Note. The reference positions used for Free Position (FP), Operating Position (OP), and Total Travel Position (TTP) values are as shown above for each type of mounting. 6 D2HW Sealed Ultra Subminiature Basic Switch Terminals/Appearances (Unit: mm) OPCB terminals (Straight) OPCB Terminals (Left-angled) OPCB terminals (Right-angled) 6 6 2.5 3-0.6 5.08 3-0.6 0.5 5.08 5.08 0.5 5.08 3-0.6 (3.1) 5.08 0.5 5.08 (3.1) D 2 H W 8r0.1 3-10.1 0 dia. holes 2.40.1 0 dia. holes (depth: 5 mm min.) 2.6 2.40.1 0 5.08r0.1 5.08r0.1 6r0.1 5.08r0.1 5.08r0.1 3-10.1 0 dia. holes OSolder terminals 3.5 1.8 1.2 3-2 0.5 4.38 4.38 OMolded Lead Wires on Left-side OMolded Lead Wires on Right-side OMolded Lead Wires Downwards NC AVSS 0.5 (Red)* Or NO AVSS 0.5 (Blue) COM AVSS 0.5 (Black)* NC AVSS 0.5 (Red) or NO AVSS 0.5 (Blue) COM AVSS 0.5 (Black) (12) (12) (12) (5) (5) 300r10 (13.3) * UL approved wires (AWG24, UL1007) are used for UL/cUL standard approved items. (13.3) 300r10 * UL approved wires (AWG24, UL1007) are used for UL/cUL standard approved items. * COM AVSS 0.5 (Black) NO AVSS 0.5 (Blue) NC AVSS 0.5 (Red) 300r10 (5) * UL approved wires (AWG24, UL1007) are used for UL/cUL standard approved items. 7 D2HW Sealed Ultra Subminiature Basic Switch Dimensions (Unit: mm) /Operating Characteristics The following illustrations and drawings are representative models. When ordering, replace @ with the code for the mounting structure, contact form and terminal that you need. See the "QList of Models" for available combinations of appearances. Refer to page 3 to 4 for the mounting structures and terminal forms. OPin plunger D2HW-@20@@ 4 Operating characteristics 1.7 dia. Without posts Type A FP D 2 H W OP TTP A t0.3 Stainless-steel lever 13 OF RF Max. Min. 0.75N {76 gf} 0.10N {10 gf} Overtravel Movement Differential OT MD Max. 1.4 mm (reference value) 0.25 mm 5.3 Free Position Operating Position Total Travel Position FP Max. 11.2 mm OP 10.4±0.2 mm TTP Max. 9.1 mm 3.4 Operating characteristics Operating Force Releasing Force (1.15) FP OP TTP (0.4) A 3.4 20 t0.3 Stainless-steel lever (0.4) 7 Free Position Operating Position Total Travel Position OSimulated Roller Lever D2HW-@23@@ A 3.4 R2 15 t0.3 Stainless-steel lever OP TTP (0.4) FP OP 8r0.1 (4.6) (1.15) 3 (0.4) 6.5 Note1. Unless otherwise specified, a tolerance of ±0.2mm applies to all dimensions. Note2. The operating characteristics are for operation in the A direction ( ). 8 Max. Min. Operating Force Releasing Force OF RF 8.8 mm 7.5±0.5 mm 6 mm Models with Posts M3-screw Mounting Models 0.5N {50 gf} 0.03N {3 gf} 2.5 mm (reference value) 0.8 mm 15.5 mm 13.3±0.8 mm 11 mm Without posts Type Max. Min. 11.5 mm 9.3±0.8 mm 7 mm Models with Posts M3-screw Mounting Models 0.65N {66 gf} 0.05N {5 gf} 1.9 mm (reference value) 0.5 mm FP Max. 16.5 mm OP 15.2±0.5 mm TTP Max. 13.5 mm Operating characteristics Operating Force Releasing Force 15 t0.3 Stainless-steel lever TTP Operating characteristics Free Position Operating Position Total Travel Position 7 OHinge Roller Lever D2HW-@24@@ 4.8×2.8 dia. Polyacetal resin roller A Without posts Overtravel OT Movement Differential MD Max. (1.15) FP 1.6 mm (reference value) 0.5 mm Type FP Max. OP TTP Max. M3-screw Mounting Models 0.75N {76 gf} 0.07N {7 gf} FP Max. 12.8 mm OP 11.5±0.5 mm TTP Max. 10 mm OF RF 7.2 mm 6.4±0.2 mm 5.1 mm Models with Posts Max. Min. Overtravel OT Movement Differential MD Max. OP TTP OF RF Operating characteristics Operating Force Releasing Force (1.15) FP Without posts Type Overtravel OT Movement Differential MD Max. 7 Free Position Operating Position Total Travel Position OLong Hinge Lever D2HW-@22@@ M3-screw Mounting Models Operating Force Releasing Force 7 OHinge Lever D2HW-@21@@ Models with Posts Type OF RF Max. Min. 12.5 mm 11.2±0.5 mm 9.5 mm Models with Posts M3-screw Mounting Models 0.65N {66 gf} 0.03N {3 gf} Overtravel OT 1.9 mm (reference value) Movement Differential MD Max. 0.6 mm Free Position Operating Position Total Travel Position FP Max. OP TTP Max. 15.3 mm 14±0.6 mm 12.3 mm D2HW Sealed Ultra Subminiature Basic Switch OLeaf straight lever D2HW-@25@@ 2.65 t0.3 Stainless-steel lever 20 FP OP Operating characteristics 8r0.1 A 3.4 Operating Force Releasing Force (1.7) TTP Free Position Operating Position Total Travel Position OLeaf Lever D2HW-@26@@ 2.65 Max. Min. t0.3 Stainless-steel lever 14 FP Max. OP TTP Max. Operating characteristics 8r0.1 A 3.4 Operating Force Releasing Force (1.7) M3-screw Mounting Models 1.2N {122 gf} 0.05N {5 gf} Type OF RF Max. Min. 11.9 mm 8.1±0.8 mm 6.0 mm Models with Posts D 2 H W M3-screw Mounting Models 1.8N {183 gf} 0.20N {20 gf} Overtravel OT 1.8 mm (reference value) Movement Differential MD Max. 0.5 mm TTP 3 6.5 OSimulated Roller Lever D2HW-@27@@ OF RF Models with Posts Overtravel OT 2.5 mm (reference value) Movement Differential MD Max. 0.7 mm 3 6.5 FP OP Type Free Position Operating Position Total Travel Position A 2.65 Operating characteristics 3.4 R2 t0.3 Stainless-steel lever 16 8r0.1 Operating Force Releasing Force (1.7) FP OP FP Max. OP TTP Max. TTP Type OF RF Max. Min. 9.3 mm 7.4±0.5 mm 5.8 mm Models with Posts M3-screw Mounting Models 1.8N {183 gf} 0.20N {20 gf} Overtravel OT 2.0 mm (reference value) Movement Differential MD Max. 0.5 mm 3 Free Position Operating Position Total Travel Position 6.5 FP Max. OP TTP Max. 13.0 mm 10.8±0.5 mm 8.9 mm OLong Leaf Lever D2HW-@28@@ A 20.85r1 t0.2 Stainless-steel lever 2.65 FP OP Operating characteristics 18.5 13r0.1 Operating Force Releasing Force TTP 3.3r0.15 dia. 3 (12) Type OF RF Max. Min. Models with Posts M3-screw Mounting Models 0.9N {92 gf} 0.05N {5 gf} Overtravel OT 2.8 mm (reference value) Movement Differential MD Max. 0.7 mm 3.10.13 -0.03 6 Free Position Operating Position Total Travel Position 0 3-0.1 dia. FP Max. OP TTP Max. 19 mm 15.4±1.5 mm 12.8 mm * COM AVSS 0.5 (Black) NO AVSS 0.5 (Blue) NC AVSS 0.5 (Red) 300r10 (5) (13.3) 0 1.5 -0.1 5.3 0 1.5 -0.1 * UL approved wires (AWG24, UL1007) are used for UL/cUL standard approved items. Note1. Unless otherwise specified, a tolerance of ±0.2mm applies to all dimensions. Note2. The operating characteristics are for operation in the A direction ( ). 9 D2HW Sealed Ultra Subminiature Basic Switch Precautions +Please refer to "General Information" for correct use. Cautions ODegree of Protection D 2 H W • Do not use this product underwater. Although molded lead wire models satisfy the test conditions for the standard given below, this test is to check the ingress of water into the switch enclosure after submerging the Switch in water for a given time. Satisfying this test condition does not mean that the Switch can be used underwater. JIS C0920: Degrees of protection provided by enclosures of electrical apparatus (IP Code) IEC 60529: Degrees of protection provided by enclosures (IP Code) Degree of protection: IP67 (check water intrusion after immersion for 30 min. submerged 1m underwater) • Do not operate the Switch when it is exposed to water spray, or when water drops adhere to the Switch surface, or during sudden temperature changes, otherwise water may intrude into the interior of the Switch due to a suction effect. • Prevent the Switch from coming into contact with oil and chemicals. Otherwise, damage to or deterioration of Switch materials may result. • Do not use the Switch in areas where it is exposed to silicon adhesives, oil, or grease. Otherwise faulty contact may result due to the generation of silicon oxide. OSoldering When soldering the lead wire to the terminal, first insert the lead wire conductor through the terminal hole and then conduct soldering. Make sure that the temperature of the soldering iron tip does not exceed 300°C, and complete the soldering within 3 seconds. Do not apply any external force for 1 minute after soldering. Soldering at an excessively high temperature or soldering for more than 3 seconds may deteriorate the characteristics of the Switch. In case of automatic soldering, please do not apply the heat beyond 260°C within 5 seconds. Pay careful attention so that flux or solder liquid does not flow over the edge of the PCB panel. OSide-actuated (Cam/Dog) Operation • When using a cam or dog to operate the Switch, factors such as the operating speed, operating frequency, push-button indentation, and material and shape of the cam or dog will affect the durability of the Switch. Confirm performance specifications under actual operating conditions before using the Switch in applications. 10 Correct Use OMounting • Turn OFF the power supply before mounting or removing the Switch, wiring, or performing maintenance or inspection. Failure to do so may result in electric shock or burning. • For M3-screw mounting models, use M3 mounting screws with plane washers or spring washers to securely mount the Switch. Tighten the screws to a torque of 0.27 to 0.29 N·m {27.5 to 29.5 gf}. Exceeding the specified torque may result in deterioration of the sealing or damage. • For models with posts, secure the posts by thermal caulking or by pressing into an attached device. When pressed into an attached device, provide guides on the opposite ends of the posts to ensure that they do not fall out or rattle. Thermal caulking conditions varies according to the equipment, jig and base used for switch mounting. Consult your OMRON sales representative for details. OOperating Body • Use an operating body with low frictional resistance and of a shape that will not interfere with the sealing rubber, otherwise the plunger may be damaged or the sealing may deteriorate. OHandling • Do not handle the Switch in a way that may cause damage to the sealing rubber. • When handling the Switch, ensure that pressure is not applied to the posts in the directions shown in the following diagram. Also, ensure that uneven pressure or pressure in a direction other than the operating direction is not applied to the Actuator as shown in the following diagram. Otherwise, the post, Actuator, or Switch may be damaged, or the service life may be reduced. OWiring Molded Lead Wire Models • When wiring molded lead wire models, ensure that there is no weight applied on the wire or that there are no sharp bends near the parts where the wire is drawn out. Otherwise, damage to the Switch or deterioration in the sealing may result. OUsing Micro Loads • Even when using micro load models within the operating range, if inrush/surge current occurs, it may increase the contact wear and so decrease durability. Therefore, insert a contact protection circuit where necessary. Please check each region's Terms & Conditions by region website. OMRON Corporation Electronic and Mechanical Components Company Regional Contact Americas https://www.components.omron.com/ Asia-Pacific https://ecb.omron.com.sg/ Korea https://www.omron-ecb.co.kr/ Europe http://components.omron.eu/ China https://www.ecb.omron.com.cn/ Japan https://www.omron.co.jp/ecb/ © OMRON Corporation 2007-2020 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. Cat. No. B105-E1-12 0220(0207)(O)