D3D221

D3D Miniature Door Switch 9mm long stroke with its unique mechanism (plunger model) ● Choose from plunger or lever as the actuator type. ● Crimp-type connector offers an easy wiring work D 3 D and efficiency. ● Snap-fit attachment for easy installation. ● Providing two colors, black and white. ● Mainly used for refrigerators. RoHS Compliant Model Number Legend 1 D3D- @ 2 @ 3 @ Contact Specifications Item 1. Actuator 1: Plunger 2: Lever Contact * Contact form SPDT SPST-NC SPST-NO White D3D-111 D3D-121 D3D-131 Black D3D-113 D3D-123 D3D-133 White D3D-211 D3D-221 D3D-231 Black D3D-213 D3D-223 D3D-233 ●SPDT 5 VDC 1 mA Please refer to "●Using Micro Loads" in "Precautions" for more information on the minimum applicable load. Resistive load 125 VAC 1A 250 VAC 0.5 A Note. The above rating values apply under the following test conditions. (1) Ambient temperature: 20±2°C (2) Ambient humidity: 65±5% (3) Operating frequency: 30 operations/min Housing color Contact Form Gold alloy Rated voltage List of Models Lever Material Ratings 3. Housing color 1: White 3: Black Plunger D3D Crossbar Minimum applicable load (reference value) * 2. Contact form 1: SPDT 2: SPST-NC 3: SPST-NO Actuator Model Specification Approved Safety Standards UL (UL1054/CSA C22.2 No.55) Model Rated voltage Item D3D Resistive load 125 VAC 1A 250 VAC 0.5 A VDE (EN61058-1) Rated voltage Model D3D 125 VAC 1A 250 VAC 0.5 A NC COM Testing conditions: 5E4 (50,000 operations) T55 (0°C to 55°C) NO ●SPST-NC NC COM ●SPST-NO COM NO 1 D3D Miniature Door Switch Characteristics Permissible operating speed Permissible operating frequency 7.5 mm to 500 mm/s Mechanical 120 operations/min Electrical 20 operations/min Insulation resistance 100 MΩ min. (at 500 VDC with insulation tester) Contact resistance (initial value) D 3 D Dielectric strength Vibration resistance *1 Shock resistance *1 Durability *2 100 mΩ max. Between terminals of the same polarity 1,000 VAC 50/60 Hz 1 min Between current-carrying metal parts and ground 1,500 VAC 50/60Hz 1 min Between each terminals and non-current-carrying metal parts 1,500 VAC 50/60Hz 1 min Malfunction 10 to 55Hz, 1.5 mm double amplitude Durability 490 m/s2 {approx. 49G} max. Malfunction 300 m/s2 {approx. 30G} max. Mechanical 300,000 operations min. (60 operations/min) Electrical 50,000 operations min. (20 operations/min) Degree of protection IEC IP00 Degree of protection against electric shock Class I Proof tracking index (PTI) 250 −30°C to +60°C (at ambient humidity 60% max.) (with no icing or condensation) Ambient operating temperature 85% max. (for +5 to +35°C) Ambient operating humidity Weight Approx. 4g Note. The given values are initial values. *1. Close or open circuit of the contact is 1 ms max. *2. For testing conditions, consult your OMRON sales representative. Mounting Holes (Unit: mm) 11.2+0.1 0 0 Four, R1 MAX. 22.9 -0.1    Direction of switch insertion R t t=0.8 to 1.5mm Dimensions (Unit: mm) and Operating Characteristics The illustrations are for models with white housing as a representative. The @ is replaced with the code for the housing color that you need. See the "List of Models" for available combinations of models. ●Plunger Models D3D-11@ D3D-12@ D3D-13@ 8.1 dia. 6 dia. R3 25 11.4 13.5 A Type 15 Operating Characteristics 1.5 15.75±0.2 R0.5 OP2 OP1 6.5 2 Model Operating Force Total Travel Force OF Max. TTF Max. Total Travel TT COM NO Operating Position OP Min. Operating Characteristics Model 10 11 ●Lever Models D3D-21@ D3D-22@ D3D-23@ 25 2 6 （90°） A 15.7±0.5 5.5 D3D-12@ D3D-13@ 2.0 N {204 gf} 3.5 N {357 gf} OP1 (NC-OFF) 13 mm 13 mm (NC-OFF) OP2 (NO-ON) 12 mm 12 mm (NO-ON) 11.4 9±0.5 R1 Type 15 1.5 OP2 OP1 3 2 15 10 11 Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). Operating Force Total Travel Force OF Max. TTF Max. Total Travel TT COM Operating Position OP Lever model D3D-21@ D3D-22@ D3D-23@ 2.0 N {204 gf} 2.5 N {245 gf} 9.7 mm (reference value) NC NO 2 D3D-11@ 9.0 mm (reference value) NC 15 Plunger model Min. OP1 (NC-OFF) 13 mm OP2 (NO-ON) 11.5 mm 13 mm (NC-OFF) 11.5 mm (NO-ON) D3D Miniature Door Switch Precautions ★Please refer to "Common Precautions" for correct use. Correct Use ●Mounting ●Wiring This product does not have a waterproof or drip-proof construction. Ensure that water does not enter the interior of the Switch. In particular, do not use the Switch in locations where water may be spilt or flow over the Switch. Doing so may result in deterioration of the insulation. Do not use the Switch with Connector mounted and weight load applied to the Connector and lead wire, otherwise it may rattle or may result in connection failure. ●Operating Stroke ●Using Micro Loads D Even when using the Switch within the operating range, if there 3 D are inrush currents or surges, it may decrease the durability of the Switch. If necessary, insert a contact protection circuit. In order to ensure stable contact force for NO contacts, set the total stroke at least 5 mm. Connector • The terminals connect to JST’s HL Connector. Contact: SSF-21T-P1.4 Housing: HLP-03V • OMRON does not sell the HL Connector. • Contact JST Mfg. for more information on the connectors. J.S.T. Manufacturing Co.,Ltd. http://www.jst-mfg.com/index_e.php • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. B107-E1-04 0117(0207)(O) 3