D3M-01K3

D3M Subminiature Basic Switch Quick-connect Terminals Simplify Wiring and Reduce Production Steps 㧰 ● Easy wiring is ensured by quick-connect terminals, and horizontal layout of terminals saves mounting space. ● External actuator mounts in either of two directions to increase Switch mounting flexibility. ● Same mounting pitch as the OMRON SS Subminiature Basic Switch. 3 M RoHS Compliant Model Number Legend 1 D3M-01@ 2 @ 3 @ 1. Lever mounting position None : without lever K : Lever set close to plunger 2. Actuator None : Pin plunger 1 : Hinge lever 2 : Hinge roller lever 3 : Simulated roller lever 3. Contact form None : SPST-NC (Color of plunger: Red) -3 : SPST-NO (Color of plunger: Black) L : Lever set distant from plunger List of Models (Contact your dealer for detailed delivery date.) Lever Mounting Position Actuator Pin plunger K Hinge lever L K Hinge roller lever L K Simulated roller lever L Contact Form Model Contact SPST-NC D3M-01 SPST-NO D3M-01-3 SPST-NC D3M-01K1 SPST-NO D3M-01K1-3 SPST-NC D3M-01L1 SPST-NO D3M-01L1-3 SPST-NC D3M-01K2 SPST-NO D3M-01K2-3 SPST-NC D3M-01L2 SPST-NO D3M-01L2-3 SPST-NC D3M-01K3 SPST-NO D3M-01K3-3 SPST-NC D3M-01L3 SPST-NO D3M-01L3-3 Contact Form ●SPST-NC Contact Specifications Specification Crossbar Material Gold alloy Gap (standard value) 0.5 mm Inrush current 1 A max. Minimum applicable load (reference value)* * 5 VDC 1 mA Please refer to "●Using Micro Loads" in "Precautions" for more information on the minimum applicable load. Ratings Rated voltage Resistive load 30 VDC 0.1 A Note. The above rating values apply under the following test conditions. (1) Ambient temperature: 20±2°C (2) Ambient humidity: 65±5% (3) Operating frequency: 30 operations/min Approved Safety Standards UL (UL1054)/CSA (CSA C22.2 No.55) Rated voltage ●SPST-NO Model 30 VDC NC NO COM COM D3M 0.1 A T Ü V (EN61058-1) Rated voltage Model 30 VDC Testing conditions: 1E5 (100,000 operations) D3M 0.1 A T55 (0°C to 55°C) 1 D3M Subminiature Basic Switch Characteristics Mounting Holes (Unit: mm) Permissible operating speed 0.1 mm to 1 m/s (for pin plunger models) Permissible operating frequency Mechanical 400 operations/min Electrical 60 operations/min 2-2.4 dia. mounting holes or M2.3 screw holes Insulation resistance 100 MΩ min. (at 500 VDC with insulation tester) Contact resistance (initial value) *1 100 mΩ max. 9.5±0.1 Between terminals of the 1,000 VAC 50/60 Hz for 1 min same polarity 㧰 3 M Dielectric strength Between current-carrying 1,500 VAC 50/60 Hz for 1 min metal parts and ground Between each terminals and non-current-carrying 1,500 VAC 50/60 Hz for 1 min metal parts Vibration Malfunction resistance *2 Shock resistance Durability *3 10 to 55 Hz, 1.5 mm double amplitude Durability 1,000m/s2 {approx. 100G} max. Malfunction *2 300 m/s2 {approx. 30G} max. Mechanical 500,000 operations min. (60 operations/min) Electrical 200,000 operations min. (30 operations/min) Degree of protection IEC IP40 Ambient operating temperature -25°C to +85°C at ambient humidity of 60% max. (with no icing or condensation) Ambient operating humidity 80% max. (for +5°C to +35°C) Weight Approx. 2g (pin plunger models) Note. The data given above are initial values. *1. Includes the resistance of the connector and lead wire (AWG #28, 50 mm length). *2. The values are Free Position and Total Travel Position values for pin plunger, and Total Travel Position value for lever. Close or open circuit of the contact is 1 ms max. *3. For testing conditions, consult your OMRON sales representative. Dimensions (Unit: mm) and Operating Characteristics ●Pin Plunger D3M-01 D3M-01-3 Models Operating Characteristics （7.2） Operating Force Releasing Force 3.5 7.6 Operating Position 2.35+0.1 -0.05 7.7 2.5 7 2.35+0.1 -0.05 dia. 2.5 dia. 9.5±0.1 29.2 5.7 （31.6） Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). Note 3. The terminals connect to JST's Dipole XA Connector. 2 OF Max. 1.50 N {153 gf} RF Min. 0.25 N {25 gf} Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. A Free Position Operating 10 Position D3M-01 D3M-01-3 OP 0.6 mm 0.4 mm 0.1 mm 8.4±0.3 mm D3M Subminiature Basic Switch ●Hinge Lever (K position) D3M-01K1 D3M-01K1-3 （7.2） t=0.3 Stainless-steel lever 18.2 A 3.6 Models Operating Characteristics D3M-01K1 D3M-01K1-3 Operating Force Releasing Force 0.50 N {51 gf} 0.06 N {6 gf} OF Max. RF Min. Overtravel OT Min. Movement Differential MD Max. 12.9 Free Position Operating Position FP Max. OP 14.0 mm 10.0±0.8 mm 㧰 2.35+0.1 -0.05 7.7 2.5 Free Position Operating Position 10 1.2 mm 0.8 mm 3 M 2.5 dia. 7 2.35+0.1 -0.05 dia. 9.5±0.1 5.7 29.2 （31.6） ●Hinge Lever (L position) D3M-01L1 D3M-01L1-3 Models Operating Characteristics 㸦7.2㸧 Operating Force Releasing Force t=0.3 Stainless-steel lever A 2.4 2.35+0.1 -0.05 7.7 2.5 7 2.35+0.1 -0.05 dia. 2.5 dia. 9.5±0.1 29.2 OF Max. 1.00 N {102 gf} RF Min. 0.10 N {10 gf} Overtravel OT Min. Movement Differential MD Max. 18.2 3.6 Free Position Operating Position 10 Free Position Operating Position D3M-01L1 D3M-01L1-3 FP Max. OP 0.7 mm 0.6 mm 11.5 mm 9.2±0.6 mm 5.7 (31.6) ●Hinge Roller Lever (K position) D3M-01K2 D3M-01K2-3 3.8 （7.2） 4.8×3.2 dia. Polyacetal resin roller A t=0.3 Stainless-steel lever 17.9 Models Operating Characteristics D3M-01K2 D3M-01K2-3 Operating Force Releasing Force 0.50 N {51 gf} 0.06 N {6 gf} OF Max. RF Min. Overtravel OT Min. Movement Differential MD Max. 12.9 2.35+0.1 -0.05 7.7 2.5 Free Position Operating Position Free Position Operating Position FP Max. OP 1.2 mm 0.8 mm 19.7 mm 15.7±0.8 mm 10 2.5 dia. 7 9.5±0.1 2.35+0.1 -0.05 dia. 29.2 5.7 （31.6） ●Hinge Roller Lever (L position) D3M-01L2 D3M-01L2-3 3.8 Models Operating Characteristics （7.2） t=0.3 Stainless-steel lever A 17.9 4.8×3.2 dia. Polyacetal resin roller 2.4 2.35+0.1 -0.05 7.7 2.5 7 2.35+0.1 -0.05 dia. 2.5 dia. 9.5±0.1 29.2 Free Position Operating Position Operating Force Releasing Force OF Max. RF Min. Overtravel OT Min. Movement Differential MD Max. Free Position Operating Position FP Max. OP D3M-01L2 D3M-01L2-3 1.00N {102 gf} 0.10N {10 gf} 0.7mm 0.6mm 17.2 mm 14.9±0.6 mm 10 5.7 （31.6） Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). Note 3. The terminals connect to JST's Dipole XA Connector. 3 D3M Subminiature Basic Switch ●Simulated Roller Lever (K position) D3M-01K3 D3M-01K3-3 㸦7.2㸧 Models Operating Characteristics t=0.3 Stainless-steel lever Operating Force Releasing Force 19.2 R1.3 3.6 㧰 2.35+0.1 -0.05 7.7 2.5 3 M 7 2.5 dia. 9.5±0.1 29.2 (31.6) 2.35+0.1 -0.05 dia. ●Simulated Roller Lever (L position) D3M-01L3 D3M-01L3-3 Free Position Operating Position 10 16.2 mm 12.2±0.8 mm Models Operating Characteristics D3M-01L3 D3M-01L3-3 A 2.35+0.1 -0.05 7.7 2.5 OF Max. RF Min. 1.00N {102 gf} 0.10N {10 gf} Overtravel OT Min. Movement Differential MD Max. R1.3 19.2 2.4 2.5 dia. 9.5±0.1 29.2 FP Max. OP Operating Force Releasing Force t=0.3 Stainless-steel lever 2.35+0.1 -0.05 dia. Free Position Operating Position 1.2 mm 0.8 mm 5.7 㸦7.2㸧 7 0.50 N {51 gf} 0.06 N {6 gf} Overtravel OT Min. Movement Differential MD Max. 12.9 A OF Max. RF Min. D3M-01K3 D3M-01K3-3 Free Position Operating 10 Position Free Position Operating Position FP Max. OP 0.7 mm 0.6 mm 13.6 mm 11.3±0.6 mm 5.7 (31.6) Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). Note 3. The terminals connect to JST's Dipole XA Connector. Precautions ★Please refer to "Common Precautions" for correct use. ●Mounting Use M2.3 mounting screw with plane washers or spring washers to securely mount the Switch. Tighten the screws to a torque of 0.23 to 0.26 N·m {2.3 to 2.7 kgf·cm}. ●Wiring Do not use the Switch with Connector mounted and weight load applied to the Connector and lead wire, otherwise it may rattle or may result in connection failure. ●Using Micro Loads Using a model for ordinary loads to open or close the contact of a micro load circuit may result in faulty contact. It is recommended to use the Switch in the operation range shown in the diagram. However, even when using micro load models within the operating range shown below, if inrush current occurs when the contact is opened or closed, it may increase contact wear and so decrease durability. Therefore, insert a contact protection circuit where necessary. The N-level reference value applies for the 100 mA 0.16 mA 30 minimum applicable load. This value 24 indicates the malfunction reference Operating range level for the reliability level of 60% (λ60). (JIS 12 C5003) The equation, 5 Voltage (V) Correct Use 1 mA λ60=0.5×10-6/operation 0 indicates that the 0.1 4 10 estimated malfunction 1 100 1,000 Current (mA) rate is less than 2,000,000 operations with a reliability level of 60%. This indicates that it is considered malfunction. Connector • The terminals connect to JST’s XA Connector. Contact: SXA-001T-P0.6 Housing: XAP-02V-1 • OMRON does not sell the XA Connector. • Contact JST Mfg. for more information on the connectors. 1 100 mA J.S.T. Manufacturing Co., Ltd. http://www.jst-mfg.com/index_e.php D3M Subminiature Basic Switch 㧰 3 M • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No.B100-E1-04 0812(0207)(O) 5