D40RLPU21M12

RFID Non-contact Safety Switches D40R RFID Non-contact switches are designed to monitor hinged, sliding or removable guard doors. RFID technology provides increased tamper resistance. • Based on RFID technology, providing high anti-tamper resistance • The RFID-design covers two models with anti-tamper coding: - B-types (Basic coded): Any sensor works with any actuator - U-types (Unique coded): Each sensor and actuator use a unique code. This is a solution for applications that require an even higher level of anti-tamper coding • Conforms to safety categories up to PLe acc. EN ISO 13849-1 • Connect up to 20 switches in series, up to PLd acc. EN ISO 13849-1 • LED indicates operation state • Operates with all two-channel NC Omron safety controllers • IP69K versions suitable for high pressure cleaning, Clean In Place (CIP) and Sanitize In Place (SIP) processes. LISTED Model Number Structure D40R-*P*-21-* 1 2 3 1. Type L: Elongated Sensor S: Small Sensor 2. Code B: Basic Code U: Unique Codes 3. Cable Length/Connection 5 m Cable 10 m Cable M12 male connector, 8 pin, fitted with 250 mm cable Ordering Information Basic coded: Any actuator will operate with any sensor (Teach process needed, if actuator will be changed: Power down - place actuator to sensor - power up). Unique coded: Only one actuator fits to the code of the sensor (Replacement of only sensor OR actuator is not possible) Type Elongated Sensors Cable Connection Contact Configuration Model Basic Coded Unique Coded 2NC/1NO D40R-LPB-21-05 D40R-LPU-21-05 D40R-LPB-21-10 D40R-LPU-21-10 D40R-LPB-21-M12 D40R-LPU-21-M12 D40R-SPB-21-05 D40R-SPU-21-05 10 m pre-wired D40R-SPB-21-10 D40R-SPU-21-10 M12, 8 pin, fitted with 250 mm cable D40R-SPB-21-M12 D40R-SPU-21-M12 5 m pre-wired 10 m pre-wired M12, 8 pin, fitted with 250 mm cable Small Sensors 5 m pre-wired 2NC/1NO 1 D40R Accessories Cables Type Cable Connection Model Cables (M12 Female - 8-pin to flying leads) 5m D40ML-CBL-M12-05M 10 m D40ML-CBL-M12-10M 2m D40P-8PMF-M12-02M 5m D40P-8PMF-M12-05M Cables (M12 Male to M12 Female - 8-pin) 10 m D40P-8PMF-M12-10M T-Connector Connection Cable T-Connector for M12 cable D40P-8PTC-M12 Shorting Plug M12 Shorting Plug D40P-8PSP-M12 Replacement Actuators 2 Type Compatible Basic Coded Switch Model Model Replacement Actuators (only for basic coded types) for D40R-LPB D40R-LPB-A for D40R-SPB D40R-SPB-A D40R Specifications Electrical Data Basic Coded Unique Coded Sensor Technology RFID (Code) Serial Switching Connect up to 20 switches in series Code Basic Coded: Every switch same code ISO 14119 Type 4 (low) Indicator LED lighted (green): Door is closed and safety circuits are closed LED dark: Door is open and safety circuits are open LED flashing: Wrong actuator Power Supply Power Consumption 24 VDC ±10% Max. 30 mA @ 24 VDC Dielectric Withstand 250 VAC Insulation Resistance 100 MΩ Output Types Unique Coded: 32,000,000 different codes ISO 14119 Type 4 (high) Safety Channel 1 NC Safety Channel 2 NC Auxiliary Channel NO Contact Release Time 200 mA, max. 24 VDC, Solid State (no polarity), minimum internal resistance 8.5 Ω