RFID Non-contact Safety Switches
D40R
RFID Non-contact switches are designed to monitor hinged, sliding or
removable guard doors. RFID technology provides increased tamper resistance.
• Based on RFID technology, providing high anti-tamper resistance
• The RFID-design covers two models with anti-tamper coding:
- B-types (Basic coded): Any sensor works with any actuator
- U-types (Unique coded): Each sensor and actuator use a unique code.
This is a solution for applications that require an even higher level of
anti-tamper coding
• Conforms to safety categories up to PLe acc. EN ISO 13849-1
• Connect up to 20 switches in series, up to PLd acc. EN ISO 13849-1
• LED indicates operation state
• Operates with all two-channel NC Omron safety controllers
• IP69K versions suitable for high pressure cleaning, Clean In Place (CIP)
and Sanitize In Place (SIP) processes.
LISTED
Model Number Structure
D40R-*P*-21-*
1
2
3
1. Type
L:
Elongated Sensor
S:
Small Sensor
2. Code
B:
Basic Code
U:
Unique Codes
3. Cable Length/Connection
5 m Cable
10 m Cable
M12 male connector, 8 pin, fitted with 250 mm cable
Ordering Information
Basic coded: Any actuator will operate with any sensor (Teach process needed, if actuator will be changed: Power down - place
actuator to sensor - power up).
Unique coded: Only one actuator fits to the code of the sensor (Replacement of only sensor OR actuator is not possible)
Type
Elongated Sensors
Cable Connection
Contact
Configuration
Model
Basic Coded
Unique Coded
2NC/1NO
D40R-LPB-21-05
D40R-LPU-21-05
D40R-LPB-21-10
D40R-LPU-21-10
D40R-LPB-21-M12
D40R-LPU-21-M12
D40R-SPB-21-05
D40R-SPU-21-05
10 m pre-wired
D40R-SPB-21-10
D40R-SPU-21-10
M12, 8 pin, fitted with 250 mm cable
D40R-SPB-21-M12
D40R-SPU-21-M12
5 m pre-wired
10 m pre-wired
M12, 8 pin, fitted with 250 mm cable
Small Sensors
5 m pre-wired
2NC/1NO
1
D40R
Accessories
Cables
Type
Cable Connection
Model
Cables (M12 Female - 8-pin to flying
leads)
5m
D40ML-CBL-M12-05M
10 m
D40ML-CBL-M12-10M
2m
D40P-8PMF-M12-02M
5m
D40P-8PMF-M12-05M
Cables (M12 Male to M12 Female
- 8-pin)
10 m
D40P-8PMF-M12-10M
T-Connector Connection Cable
T-Connector for M12 cable
D40P-8PTC-M12
Shorting Plug
M12 Shorting Plug
D40P-8PSP-M12
Replacement Actuators
2
Type
Compatible Basic Coded Switch Model
Model
Replacement Actuators
(only for basic coded types)
for D40R-LPB
D40R-LPB-A
for D40R-SPB
D40R-SPB-A
D40R
Specifications
Electrical Data
Basic Coded
Unique Coded
Sensor Technology
RFID (Code)
Serial Switching
Connect up to 20 switches in series
Code
Basic Coded:
Every switch same code
ISO 14119 Type 4 (low)
Indicator
LED lighted (green): Door is closed and safety circuits are closed
LED dark: Door is open and safety circuits are open
LED flashing: Wrong actuator
Power Supply
Power Consumption
24 VDC ±10%
Max.
30 mA @ 24 VDC
Dielectric Withstand
250 VAC
Insulation Resistance
100 MΩ
Output Types
Unique Coded:
32,000,000 different codes
ISO 14119 Type 4 (high)
Safety Channel 1 NC
Safety Channel 2 NC
Auxiliary Channel NO
Contact Release Time
200 mA, max. 24 VDC, Solid State (no polarity), minimum internal resistance
8.5 Ω
很抱歉,暂时无法提供与“D40RSPB21M12”相匹配的价格&库存,您可以联系我们找货
免费人工找货