Guard Lock Safety-door Switch/Slide key
D4GL/D4GL-SK10-LK@
CSM_D4GL_D4GL-SK10-LK_DS_E_6_1
Vertically Mounting Guard Lock
Safety-door Switch Ideal for Limited
Installation Space
• Selectable Operation Key insertion direction.
• Slim safety-door switch with an electromagnetic lock or
unlock mechanism .
• Built-in switches with multiple-contact construction are
available.
• A key holding force of 1,000 N minimum.
• Can be used for either standard loads or microloads.
• Lineup includes models with a conduit size of M20.
• Variety of Metallic Heads Available.
Guard Lock
Safety-door Switches
Slide keys
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
• The D4GL Vertical Electromagnetic Lock and Safety-door
Switches easily mount to a 40 × 40-mm aluminum frame section.
• The Switches are made of resin so they are suitable for lightweight doors.
Be sure to read the “Safety Precautions” on page 17 and
the “Precautions for All Safety Door Switches”.
Model Number Structure
Model Number Legend
Switch (Standard type)
Switch (Metallic release key type)
D4GL-@@@@-@@
D4GL-@@@@-@@-SJ
1 2 3 4
5 6
1. Conduit Size
1: Pg13.5
2: G1/2
4: M20
2. Built-in Switch (with Door Open/Closed Detection Switch and
Lock Monitor Switch Contacts)
A: 1NC/1NO (slow-action contacts) + 1NC/1NO (slow-action
contacts)
B: 1NC/1NO (slow-action contacts) + 2NC (slow-action contacts)
C: 2NC (slow-action contacts) + 1NC/1NO (slow-action contacts)
D: 2NC (slow-action contacts) + 2NC (slow-action contacts)
E: 2NC/1NO (slow-action contacts) + 1NC/1NO (slow-action
contacts)
F: 2NC/1NO (slow-action contacts) + 2NC (slow-action contacts)
G: 3NC (slow-action contacts) + 1NC/1NO (slow-action contacts)
H: 3NC (slow-action contacts) + 2NC (slow-action contacts)
3. Head Mounting Direction and Material
F: Four mounting directions possible (Front-side mounting at
shipping)/plastic
D: Four mounting directions possible (Front-side mounting at
shipping)/metal
4. Door Lock and Release
A: Mechanical lock/24 VDC solenoid release
G: 24 VDC solenoid lock/mechanical release
5. Indicator
A: 24 VDC (orange/green LED indicator)
6. Release Key Type
Blank: Standard release key (resin)
4:
Special release key (resin)
(Note: Release keys are provided.)
1 2 3 4
5 6
1. Conduit Size
2: G1/2 (1-conduit)
4: M20 (1-conduit)
2. Built-in Switch
A: 1NC/1NO + 1NC/1NO
B: 1NC/1NO + 2NC
C: 2NC + 1NC/1NO
D: 2NC + 2NC
E: 2NC/1NO + 1NC/1NO
F: 2NC/1NO + 2NC
G: 3NC + 1NC/1NO
H: 3NC + 2NC
3. Head Material
F: resin
4. Door Lock and Release
A: Mechanical lock/24 VDC solenoid release
G: 24 VDC solenoid lock/ mechanical release
5. Indicator
A: 24 VDC (orange/green LED indicator)
Note: The wiring specification is different from the wiring
specification for the standard type.
Please refer to the "Connection" section for details.
6. Release Key Type
Blank: Standard release key (metal)
Operation Key
D4DS-K@
1
1. Operation Key Type
1: Horizontal mounting
2: Vertical mounting
3: Adjustable mounting (horizontal)
5: Adjustable mounting (horizontal/vertical)
1
D4GL/D4GL-SK10-LK@
Ordering Information
List of Models
Switches (Operation Keys are sold separately.)
: Models with certified direct opening contacts.
Consult with your OMRON representative when ordering any models that are not listed in this table.
Head
material
Release
key type
Solenoid voltage/
indicator
Lock and release
types
Contact configuration
(door open/closed
detection switch and lock
monitor switch contacts)
(slow-action)
Certified direct opening
NC contact
Conduit size
Pg13.5
1NC/1NO+1NC/1NO
1NC/1NO+2NC
2NC+1NC/1NO
2NC+2NC
Mechanical lock
Solenoid release
2NC/1NO+1NC/1NO
2NC/1NO+2NC
3NC+1NC/1NO
3NC+2NC
Plastic
Standard
(resin)
Solenoid: 24 VDC
Orange/green LED:
24 VDC
1NC/1NO+1NC/1NO
1NC/1NO+2NC
2NC+1NC/1NO
2NC+2NC
Solenoid lock
Mechanical release
2NC/1NO+1NC/1NO
2NC/1NO+2NC
3NC+1NC/1NO
3NC+2NC
Model
D4GL-1AFA-A
G1/2
D4GL-2AFA-A *
M20
D4GL-4AFA-A
Pg13.5
D4GL-1BFA-A
G1/2
D4GL-2BFA-A
M20
D4GL-4BFA-A
Pg13.5
D4GL-1CFA-A
G1/2
D4GL-2CFA-A
M20
D4GL-4CFA-A
Pg13.5
D4GL-1DFA-A
G1/2
D4GL-2DFA-A *
M20
D4GL-4DFA-A
Pg13.5
D4GL-1EFA-A
G1/2
D4GL-2EFA-A
M20
D4GL-4EFA-A
Pg13.5
D4GL-1FFA-A
G1/2
D4GL-2FFA-A *
M20
D4GL-4FFA-A
Pg13.5
D4GL-1GFA-A
G1/2
D4GL-2GFA-A
M20
D4GL-4GFA-A
Pg13.5
D4GL-1HFA-A
G1/2
D4GL-2HFA-A *
M20
D4GL-4HFA-A
Pg13.5
D4GL-1AFG-A
G1/2
D4GL-2AFG-A *
M20
D4GL-4AFG-A
Pg13.5
D4GL-1BFG-A
G1/2
D4GL-2BFG-A
M20
D4GL-4BFG-A
Pg13.5
D4GL-1CFG-A
G1/2
D4GL-2CFG-A
M20
D4GL-4CFG-A
Pg13.5
D4GL-1DFG-A
G1/2
D4GL-2DFG-A *
M20
D4GL-4DFG-A
Pg13.5
D4GL-1EFG-A
G1/2
D4GL-2EFG-A
M20
D4GL-4EFG-A
Pg13.5
D4GL-1FFG-A
G1/2
D4GL-2FFG-A *
M20
D4GL-4FFG-A
Pg13.5
D4GL-1GFG-A
G1/2
D4GL-2GFG-A
M20
D4GL-4GFG-A
Pg13.5
D4GL-1HFG-A
G1/2
D4GL-2HFG-A *
M20
D4GL-4HFG-A
* Models with Korean S-mark certification.
2
D4GL/D4GL-SK10-LK@
Head
material
Release
key type
Solenoid voltage/
indicator
Lock and release
types
Contact configuration
(door open/closed
detection switch and lock
monitor switch contacts)
(slow-action)
Certified direct opening
NC contact
1NC/1NO+1NC/1NO
1NC/1NO+2NC
2NC+1NC/1NO
2NC+2NC
Mechanical lock
Solenoid release
2NC/1NO+1NC/1NO
2NC/1NO+2NC
3NC+1NC/1NO
Plastic
Special
release
key
(resin)
3NC+2NC
Solenoid: 24 VDC
Orange/green LED:
24 VDC
1NC/1NO+1NC/1NO
1NC/1NO+2NC
2NC+1NC/1NO
2NC+2NC
Solenoid lock
Mechanical release
2NC/1NO+1NC/1NO
2NC/1NO+2NC
3NC+1NC/1NO
3NC+2NC
Conduit size
Model
Pg13.5
D4GL-1AFA-A4
G1/2
D4GL-2AFA-A4
M20
D4GL-4AFA-A4
Pg13.5
D4GL-1BFA-A4
G1/2
D4GL-2BFA-A4
M20
D4GL-4BFA-A4
Pg13.5
D4GL-1CFA-A4
G1/2
D4GL-2CFA-A4
M20
D4GL-4CFA-A4
Pg13.5
D4GL-1DFA-A4
G1/2
D4GL-2DFA-A4
M20
D4GL-4DFA-A4
Pg13.5
D4GL-1EFA-A4
G1/2
D4GL-2EFA-A4
M20
D4GL-4EFA-A4
Pg13.5
D4GL-1FFA-A4
G1/2
D4GL-2FFA-A4
M20
D4GL-4FFA-A4
Pg13.5
D4GL-1GFA-A4
G1/2
D4GL-2GFA-A4
M20
D4GL-4GFA-A4
Pg13.5
D4GL-1HFA-A4
G1/2
D4GL-2HFA-A4
M20
D4GL-4HFA-A4
Pg13.5
D4GL-1AFG-A4
G1/2
D4GL-2AFG-A4
M20
D4GL-4AFG-A4
Pg13.5
D4GL-1BFG-A4
G1/2
D4GL-2BFG-A4
M20
D4GL-4BFG-A4
Pg13.5
D4GL-1CFG-A4
G1/2
D4GL-2CFG-A4
M20
D4GL-4CFG-A4
Pg13.5
D4GL-1DFG-A4
G1/2
D4GL-2DFG-A4
M20
D4GL-4DFG-A4
Pg13.5
D4GL-1EFG-A4
G1/2
D4GL-2EFG-A4
M20
D4GL-4EFG-A4
Pg13.5
D4GL-1FFG-A4
G1/2
D4GL-2FFG-A4
M20
D4GL-4FFG-A4
Pg13.5
D4GL-1GFG-A4
G1/2
D4GL-2GFG-A4
M20
D4GL-4GFG-A4
Pg13.5
D4GL-1HFG-A4
G1/2
D4GL-2HFG-A4
M20
D4GL-4HFG-A4
3
D4GL/D4GL-SK10-LK@
Head
material
Release
key type
Solenoid voltage/
indicator
Lock and release
types
Contact configuration
(door open/closed
detection switch and lock
monitor switch contacts)
1NC/1NO+1NC/1NO
1NC/1NO+2NC
2NC+1NC/1NO
2NC+2NC
Mechanical lock
Solenoid release
2NC/1NO+1NC/1NO
2NC/1NO+2NC
3NC+1NC/1NO
Plastic
Standard
(metal)
3NC+2NC
Solenoid: 24 VDC
Orange/green LED:
24 VDC
1NC/1NO+1NC/1NO
1NC/1NO+2NC
2NC+1NC/1NO
2NC+2NC
Solenoid lock
Mechanical release
2NC/1NO+1NC/1NO
2NC/1NO+2NC
3NC+1NC/1NO
3NC+2NC
Conduit size
Model
G1/2
D4GL-2AFA-A-SJ *
M20
D4GL-4AFA-A-SJ *
G1/2
D4GL-2BFA-A-SJ *
M20
D4GL-4BFA-A-SJ *
G1/2
D4GL-2CFA-A-SJ *
M20
D4GL-4CFA-A-SJ *
G1/2
D4GL-2DFA-A-SJ *
M20
D4GL-4DFA-A-SJ *
G1/2
D4GL-2EFA-A-SJ *
M20
D4GL-4EFA-A-SJ *
G1/2
D4GL-2FFA-A-SJ *
M20
D4GL-4FFA-A-SJ *
G1/2
D4GL-2GFA-A-SJ *
M20
D4GL-4GFA-A-SJ *
G1/2
D4GL-2HFA-A-SJ *
M20
D4GL-4HFA-A-SJ *
G1/2
D4GL-2AFG-A-SJ *
M20
D4GL-4AFG-A-SJ *
G1/2
D4GL-2BFG-A-SJ *
M20
D4GL-4BFG-A-SJ *
G1/2
D4GL-2CFG-A-SJ *
M20
D4GL-4CFG-A-SJ *
G1/2
D4GL-2DFG-A-SJ *
M20
D4GL-4DFG-A-SJ *
G1/2
D4GL-2EFG-A-SJ *
M20
D4GL-4EFG-A-SJ *
G1/2
D4GL-2FFG-A-SJ *
M20
D4GL-4FFG-A-SJ *
G1/2
D4GL-2GFG-A-SJ *
M20
D4GL-4GFG-A-SJ *
G1/2
D4GL-2HFG-A-SJ *
M20
D4GL-4HFG-A-SJ *
* These models will receive Korean S-mark certification.
Operation Keys
Type
Model
Horizontal mounting
D4DS-K1
Vertical mounting
D4DS-K2
Adjustable mounting
(Horizontal)
D4DS-K3
Adjustable mounting
(Horizontal/Vertical)
D4DS-K5
4
D4GL/D4GL-SK10-LK@
Slide keys
Appearance
Specifications
Contents
Model
Slide Key: 1 (not yet mounted)
D4GL mounting plate: 1
Door Switch special mounting screws: 4
Weight: Approx. 0.6 kg D4DS-K1 (operation key): 1
Mechanical durability: D4DS-K1 special mounting screws: 2
D4GL-SK10-LK
20,000 operations min. Lockout keys: 2
Lockout key strap: 1
Caution labels (stickers): 2 sheets (English
and Japanese)
Weight:Approx.0.1kg
Inner Lever:1
D4SL-SK10H*
Slide Key: 1 (not yet mounted)
D4GL mounting plate: 1
Door Switch special mounting screws: 4
Weight:Approx.0.7kg
D4DS-K1 (operation key): 1
Mechanical durability: D4DS-K1 special mounting screws: 2
D4GL-SK10-LKH
20,000 operations min. Lockout keys: 2
Lockout key strap: 1
Caution labels (stickers): 2 sheets (English
and Japanese)
Applicable Door Switch
D4GL
-
D4GL
Note: 1. The Door Switch is not included. Select the Door Switch depending on the necessary number of contacts and the conduit size.
The contents are provided as a total set, individual contents cannot be ordered separately.
2. Perform risk assessment for the equipment in question, configure relay units and other safety circuits, and use properly.
* The inner lever for D4GL-SK10-LK/D4SL-NSK10-LK that can not be used for other products and applications.
D4GL-SK10-LK
＋
D4GL-SK10-LK
＝
D4GL
D4GL-SK10-LKH
＋
D4GL-SK10-LKH
＝
D4GL
5
D4GL/D4GL-SK10-LK@
Features
The lockout key prevents workers from becoming trapped without using a padlock.
Note: Using two-color LEDs enables confirming whether the door is open or closed and locked or unlocked.
Example: D4GL-2DFA-A with mechanical lock and solenoid release
Locked (power not
Close door. supplied to solenoid)
The slide handle is closed.
The handle-shaped fixture makes
it easy to use the Door Switch.
Close door.
Attach the supplied
caution labels for display.
Locked (power not
supplied to solenoid)
The slide handle is closed.
Left door
Lockout Key
The slide handle can be pulled.
Open door.
The slide handle is open.
Door Opening to
the Left.
Do not turn the key as in the figure above if the
slide handle is closed.
Open door.
The slide handle is open.
Open door.
The slide handle is open.
The slide handle
does not move.
When the slide handle is open, the
lockout key can be pulled regardless
of whether power is being supplied
to the solenoid or not.
The slide handle is secured at the position
shown in the figure.
A worker holding the lockout key will not be
trapped locked inside the hazardous area by
another person.
If the lockout key is not mounted, the
slide handle will not move and the
door will not close.
6
D4GL/D4GL-SK10-LK@
Specifications
Standards and EC Directives
Characteristics
Conforms to the following EC Directives:
•
•
•
•
•
Degree of protection *1
Mechanical
Machinery Directive
Low Voltage Directive
EN1088
EN60204-1
GS-ET-19
Certified Standards
Standard type
Certification body
UL *1
CQC (CCC)
Standard
EN60947-5-1
(certified direct opening)
UL508, CSA C22.2 No.14
GB14048.5
KOSHA *2
EN 60947-5-1
TÜV SÜD
File No.
Consult your OMRON
representative for details.
E76675
2003010305064264
Consult your OMRON
representative for details.
*1. Certification for CSA C22.2 No. 14 is authorized by the UL mark.
*2. Only certain models have been certified.
Metallic release key type
Certification body
Standard
EN60947-5-1
(certified direct opening)
TÜV SÜD
KOSHA
File No.
Consult your OMRON
representative for details.
Consult your OMRON
representative for details.
EN 60947-5-1
Certified Standard Ratings
TÜV (EN60947-5-1), CCC (GB14048.5)
Utilization
Item
category
Rated operating current (Ie)
Rated operating voltage (Ue)
AC-15
DC-13
0.75 A
240 V
0.27 A
250 V
Note: Use a 10 A fuse type gI or gG that conforms to IEC60269 as a
short-circuit protection device.
UL/CSA (UL508, CSA C22.2 No. 14)
C300
Rated
voltage
Carry current
120 VAC
240 VAC
2.5 A
Current (A)
Make
Break
15
1.5
7.5
0.75
Volt-amperes (VA)
Make
Break
Current (A)
Make
Break
0.55
0.55
0.27
0.27
Volt-amperes (VA)
Make
Break
1,800
180
Q300
Rated
voltage
Carry current
125 VAC
250 VAC
2.5 A
69
Solenoid Coil Characteristics
Item
Type
Rated operating voltage
(100% ED)
Current consumption
Insulation
24 VDC
24 VDC ±10%
Approx. 200 mA
Class B (130°C max.)
Indicator Characteristics
Item
Rated voltage
Current leakage
Color (LED)
Type
LED
24 VDC
Approx. 3 mA
Orange/Green
69
IP67 (EN60947-5-1)
1,000,000 operations min.
500,000 operations min. (4 mA
resistive load at 24 VDC)
Durability *2
150,000 operations min. (1 A
Electrical
resistive load at 125 VAC, 2
circuits/4 mA resistive load at
24 VDC, 2 circuits) *3
Operating speed
0.05 to 0.5 m/s
Operating frequency
30 operations/minute max.
Direct opening force *4
60 N min. (EN60947-5-1)
Direct opening travel *4
10 mm min. (EN60947-5-1)
Holding force *5
1,000 N min.
Contact resistance
100 mΩ max.
4 mA resistive load at 24 VDC (NMinimum applicable load *6
level reference value)
Rated insulation voltage (Ui) 300 V (EN60947-5-1)
Rated frequency
50/60 Hz
Protection against electric shock Class II (double insulation)
Pollution degree (operating
3 (EN60947-5-1)
environment)
Between
terminals of
2.5 kV
same polarity
Between
4 kV
terminals of
different polarity
Impulse
Between
withstand
solenoid and
voltage
0.8 kV
(EN60947-5- non-current
carrying
1)
metallic parts
Between other
terminals and
non-current
4 kV
carrying
metallic parts
Insulation resistance
100 MΩ min. (at 500 VDC)
Contact gap
2 × 2 mm min.
10 to 55 Hz, 0.75 mm single
Vibration
Malfunction
amplitude
resistance
Destruction
1,000 m/s2 min.
Shock
resistance
Malfunction
300 m/s2 min.
Conditional short-circuit
100 A (EN60947-5-1)
current
Conventional free air thermal
2.5 A (EN60947-5-1)
current (Ith)
Ambient operations temperature −10 to 55°C (with no icing)
Ambient operations humidity 95% max.
Weight
Approx. 400 g (D4GL-1AFA-A)
Note: 1. The above values are initial values.
2. The Switch contacts can be used with either standard loads
or microloads. Once the contacts have been used to switch a
load, however, they cannot be used to switch smaller loads.
The contact surfaces will become rough once they have been
used and contact reliability for smaller loads may be reduced.
*1. The degree of protection is tested using the method specified by the
standard (EN60947-5-1). Confirm that sealing properties are sufficient
for the operating conditions and environment beforehand. Although the
switch box is protected from dust or water penetration, do not use the
D4GL in places where foreign material may enter through the key hole
on the head, otherwise Switch damage or malfunctioning may occur.
*2. The durability is for an ambient temperature of 5 to 35°C and an
ambient humidity of 40% to 70%. For more details, consult your
OMRON representative.
*3. Do not pass the 1 A, 125 VAC load through more than 2 circuits.
*4. These figures are minimum requirements for safe operation.
*5. This figure is based on the GS-ET-19 evaluation method.
*6. This value will vary with the switching frequency, environment,
and reliability level. Confirm that correct operation is possible with
the actual load beforehand.
7
D4GL/D4GL-SK10-LK@
Connections
Internal Circuit Diagram
Indicator
Connection Example for D4GL-1HFA-A
51
Solenoid
24V DC
E1 (+)
D4GL-@@@@-@@
D
LED (Green) (+)
12
41
42
11
Safety
circuit
52
21
Auxiliary
circuit
22
D
Auxiliary
circuit
LED (Orange) (+)
E2 (−)
LED
LED
(Green) (Orange)
31
32
O1 (Green)
5 to 24V DC
CRD
CRD
ZD
ZD
COM (−)
D4GL-@@@@-@@-SJ
D
LED (Green) (+)
LED
(Green)
LED
(Green)
E2
E1
O3 (Orange)
Auxiliary
circuit
O2
(Black)
Solenoid
LED
(Orange)
• Direct opening contacts used as safety-circuit input are indicated
with the
mark.
Terminals 11 and 12 and terminals 21 and 22 are direct opening
contacts.
• Connect the indicators in parallel to the auxiliary circuits or
terminals E1 and E2.
• Although the 3 lines are connected at the time of delivery, rewire
them as necessary for the application.
5 to 24V DC
CRD
ZD
LED (Green) (−)
Indicator
Terminal
number
Lead wire
color
Connected
terminal
number *
Green indicator (+)
01
Green
31
Orange indicator (+)
03
Orange
E1
Common (-)
02
Black
E2
Indicator
Terminal
number
Lead wire
color
Connected
terminal
number *
Green indicator (+)
01
Green
31
D
LED (Orange) (+)
LED
(Orange)
5 to 24V DC
CRD
ZD
LED (Orange) (−)
Circuit Connection Example
• Terminals 12 and 41 are connected internally and so connect
terminals 11 and 42 for safety-circuit input. (BIA GS-ET-19)
• Connect terminals 21 and 22 and terminals 51 and 52 in series
when using as safety-circuit input (redundancy circuit for terminals
11 and 12 and terminals 41 and 42 above). Connect the terminals
individually when using as auxiliary-circuit input (e.g., terminals 21
and 22 for safety-door open/closed monitoring and terminals 51
and 52 for monitoring the lock status).
• In the following connection example, terminals 21 and 22 and
terminals 51 and 52 are used as auxiliary-circuit input.
In this case,the green indicator lights when the door is closed and
the orange indicator lights when the solenoid turns ON.
Green indicator (-)
04
White
−
Orange indicator (+)
03
Orange
E1
Orange indicator (-)
05
Black
E2
* The terminal number of green indicator will be different according to
the contact configuration.
D4GL-@@@@-@@
2
“2” : A, B, E, or F =33
“2” : C or D
=21
“2” : G or H
=31
• If an indicator is connected in parallel to a direct opening contact,
when the indicator breaks, a short-circuit current will be generated,
possibly resulting in an installation malfunction.
• Do not switch circuits for two or more standard loads at the same
time. Doing so may adversely affect insulation performance.
• DC solenoids have polarity. Confirm terminal polarity before wiring.
8
D4GL/D4GL-SK10-LK@
Operation Method
Operation Principles
Plunger return spring
LOCK
Lock spring
UNLOCK
Linking arm
The lock plate
and monitor
switch are linked.
Mechanical
lock
models
Return spring
OFF
OFF
ON
When the door is closed, it is locked by the The solenoid is released only when the
lock spring. The door will stay locked even lock is turned ON.
if there is a power interruption.
Plunger return spring
Lock return spring
LOCK
UNLOCK
Linking arm
The lock plate
and monitor
switch are linked.
Solenoid
lock
models
Return spring
OFF
ON
OFF
If the solenoid is OFF, the door will not be
locked when it is closed. This means that
the door can be opened and closed easily
when replacing workpieces or parts.
The door is locked only when the solenoid
is turned ON. This means that the door will
be unlocked if there is a power interruption
and so this model cannot be used in
systems that would maintain a hazardous
state (e.g., systems requiring toxic gases,
high temperatures, or gears that would
continue to turn due to inertia).
Structure and Nomenclature
Structure
Operation key hole
Indicator (green)
Indicator (orange)
Release key
Terminal 42
Terminal 21
Terminal 11
Terminal 22
Terminal 31/33
Terminal 51/53
Terminal 32/34
Conduit opening
Terminal 52/54
Conduit opening
Terminal E2 (−)
Terminal E1 (+)
Cover
Note: Terminal numbers vary with the model. Confirm terminal numbers by referring to the cover on the back of the Switch.
9
D4GL/D4GL-SK10-LK@
Contact Form
Indicates conditions where the Key is inserted and the lock is applied. Terminals 12 and 41 are connected internally (as per BIA GS-ET-19).
Model
Contact
(door open/closed
detection and lock
monitor)
Contact form
Door open/
closed
detection
Operating pattern
Lock monitor
Remarks
Lock position
D4GL-@AF@-@
1NC/1NO + 1NC/1NO
Door open/
closed detection
Zb
11
12
Lock monitor
41
42
33
53
54
Zb
11-42
33-34
53-54
ON
Stroke
34
Operation Key insertion
completion position
Extraction completion
position
Lock position
D4GL-@BF@-@
1NC/1NO + 2NC
Door open/
closed detection
Zb
11
12
Lock monitor
41
42
33
51
52
Zb
11-42
33-34
51-52
ON
Operation Key insertion
completion position
Extraction completion
position
Lock position
D4GL-@CF@-@
2NC + 1NC/1NO
Door open/
closed detection
Zb
11
12
41
42
21
53
54
22
Lock monitor
Zb
11-42
21-22
53-54
ON
Stroke
Operation Key insertion
completion position
Extraction completion
position
Lock position
D4GL-@DF@-@
2NC + 2NC
Door open/
closed detection
Zb
11
12
41
42
21
51
52
22
Lock monitor
Zb
11-42
21-22
51-52
ON
Stroke
Operation Key insertion
completion position
Extraction completion
position
Lock position
D4GL-@EF@-@
2NC/1NO + 1NC/1NO
Door open/
closed detection
Zb
11
12
Lock monitor
41
42
21
22
53
54
33
34
Zb
11-42
21-22
33-34
53-54
ON
Stroke
Operation Key insertion
completion position
Extraction completion
position
Lock position
D4GL-@FF@-@
2NC/1NO + 2NC
Door open/
closed detection
Zb
11
12
41
Lock monitor
42
21
22
51
52
33
34
Zb
11-42
21-22
33-34
51-52
ON
Stroke
Operation Key insertion
completion position
Extraction completion
position
Lock position
D4GL-@GF@-@
3NC + 1NC/1NO
Door open/
closed detection
Zb
11
12
41
Lock monitor
42
21
22
53
54
31
32
Zb
11-42
21-22
31-32
53-54
ON
Stroke
Operation Key insertion
completion position
Extraction completion
position
Lock position
D4GL-@HF@-@
3NC + 2NC
Door open/
closed detection
Zb
11
12
41
Lock monitor
42
21
22
51
52
31
32
Zb
11-42
21-22
31-32
51-52
ON
Stroke
Operation Key insertion
completion position
The terminals 11-42,
33-34, and 53-54 can
be used as unlike poles.
Only NC contact 11-12,
has a certified direct
opening mechanism.
The terminals 11-42,
33-34, and 51-52 can
be used as unlike poles.
Stroke
34
Only NC contact 11-12
has a certified direct
opening mechanism.
Extraction completion
position
Only NC contacts 11-12
and 21-22 have a
certified direct opening
mechanism.
The terminals 11-42,
21-22, and 53-54 can
be used as unlike poles.
Only NC contacts 11-12
and 21-22 have a
certified direct opening
mechanism.
The terminals 11-42,
21-22, and 51-52 can
be used as unlike poles.
Only NC contacts 11-12
and 21-22 have a
certified direct opening
mechanism.
The terminals 11-42,
21-22, 33-34, and 53-54
can be used as unlike
poles.
Only NC contacts 11-12
and 21-22 have a
certified direct opening
mechanism.
The terminals 11-42,
21-22, 33-34, and 51-52
can be used as unlike
poles.
Only NC contacts 11-12,
21-22, and 31-32 have a
certified direct opening
mechanism.
The terminals 11-42,
21-22, 31-32, and 53-54
can be used as unlike
poles.
Only NC contacts 11-12,
21-22, and 31-32 have a
certified direct opening
mechanism.
The terminals 11-42,
21-22, 31-32, and 51-52
can be used as unlike
poles.
10
D4GL/D4GL-SK10-LK@
Dimensions
(Unit: mm)
Dimensions and Operating Characteristics
Switches
D4GL-@@@@-A4
15.3
15.3
D4GL-@@@@-A
Four, head mounting screws
Four, head mounting screws
Head cap
Head cap
Pre-travel
distance
34.4
15.3
23.5
Four, 5.2-dia.
holes
31.5
Four, 5.2-dia.
holes
Four, 9.2-dia. spot
facings (depth: 10)
Four, 9.2-dia. spot
facings (depth: 10)
Four, LED
indicators
Release key
84±0.2
Release key
Cover mounting
screw
Cover mounting
screw
Two, cap screws
(3)
(3)
Two, cap screws
30±0.2
(3)
(21.5)
(3)
30±0.2
43
(3)
23.5
43
23.5
(3)
Conduit cap
Model
(18.5)
(18.5)
Conduit cap
Operating
characteristics
(127.5)
148
(187)
(127.5)
148
(187)
84±0.2
Four, LED
indicators
(21.5)
34.4
15.3
31.5
4.4
23.5
Pre-travel
distance
Operation Key
47.8
40
38
4.4
Operation Key
47
40
38
Operating
characteristics
D4GL-@@@@-A
Key insertion force
Key extraction force
15 N max.
40 N max.
Pre-travel distance
10 mm max.
Movement before
being locked
D4GL-@@@@-A4
Key insertion force
Key extraction force
15 N max.
40 N max.
Pre-travel distance
Model
10 mm max.
Movement before
being locked
4 mm min.
4 mm min.
Operation Keys
D4DS-K1
17.5
D4DS-K3
28
14
13
30
28
15
Angle adjustment bolt
9 dia.
4
8 dia.
4.5 dia.
4.3
7
13
13
30
40
56
20°
Four, 2.15R
7
Black
2
2
6.3
10.5
D4DS-K2
9
30
28
6
D4DS-K5
20.9
7
13
15
28
4
15
17
13.5
4.5
15 °
8
30
41
2 4.3
Mounting Holes
(Enlargement)
24.6
22.5
43
55
7
13
Four, 2.15R
Black
18 °
41
6.5
18
43
(7)
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
11
D4GL/D4GL-SK10-LK@
Slide keys
D4GL-SK10-LK
(Open door.)
10
(Close door.)
(98)
40×40
40×40
12.5
(40)
Lockout key
(8)
(29)
(314)
(35)
+10
15-5
(230)
(112)
(147)
107
(35)
(28)
(84)
(71.8)
19.1
(20)
11.5
Shot bolt
17
(56.5)
SLIDE
SLIDE
LOCK
LOCK
50
SLIDE
FREE
SLIDE
(64) (90.4)
FREE
Guide
(76.2)
Four, M6 mounting holes
(32.5)
Slide base
D4DS-K1
Operation Key
(350) 84.1
UN
–LOCK
UN
–LOCK
LOCK
LOCK
4
30
4-M5
Cross-sectional
view A-A
17
(22.7)
A
Guard Lock Safety-door
A
Switch D4GL
11.5
12.5
Two, M6
8
Switch base
mounting holes
D4GL-SK10-LKH
(Open door.)
(Close door.)
10
Aluminum frame
40×40
12.5
Lockout key
(323)
(40)
(121)
(147)
(35)
(239)
(29)
107
84
37
(71.8)
19.1
(20)
11.5
(56.5)
(115)
17
SLIDE
SLIDE
(78)
LOCK
LOCK
50 (64) (90.4)
SLIDE
FREE
SLIDE
FREE
Guide
Ø12
Ø40
(76.2)
Inner Lever
(32.5)
Slide base
D4DS-K1
(35)
Operation Key
Four, M6 mounting holes
Shot bolt
(350)
84.1
4
UN
–LOCK
UN
–LOCK
LOCK
LOCK
Cross-sectional
30
view A-A
4-M5
Guard Lock Safety-door
Switch D4GL
+10
15-5
17
Between slyde key unit
(22.7)
A
A
11.5
12.5
Two, M6
8
Switch base
mounting holes
12
D4GL/D4GL-SK10-LK@
With Operation Key Inserted
D4GL + D4DS-K1
(with Front-inserted Operation Key)
(38)
D4GL + D4DS-K1
(with Top-inserted Operation Key)
Horizontal
insertion radius:
R ≥ 200
(15)
51.5 min. 54 max.
Key insertion position
Center
tolerance of
key hole: ±1
Vertical
insertion radius:
R ≥ 200
(15)
Center
tolerance of
key hole: ±1
Center
tolerance of
key hole: ±1
(15.2)
52.5 min. 55.0 max.
Key insertion position
(39)
Center
tolerance of
key hole: ±1
Vertical
insertion radius:
R ≥ 200
(39)
(31.7)
Horizontal
insertion radius:
R ≥ 200
52.5 min. 55.0 max.
Key insertion position
D4GL + D4DS-K2
(with Top-inserted Operation Key)
D4GL + D4DS-K2
(with Front-inserted Operation Key)
(38)
Horizontal
insertion radius:
R ≥ 200
(15)
47.5 min. 50 max.
Key insertion position
Center
tolerance of
key hole: ±1
Vertical
insertion radius:
R ≥ 200
Vertical
insertion radius:
R ≥ 200
(15)
Center
tolerance of
key hole: ±1
48.5 min. 51.0 max.
Key insertion position
Center
tolerance of
key hole: ±1
(15.2)
(6)
(39)
Center
tolerance of
key hole: ±1
(39)
(31.7)
Horizontal
insertion radius:
R ≥ 200
48.5 min. 51.0 max.
Key insertion position
13
D4GL/D4GL-SK10-LK@
D4GL + D4DS-K3
D4GL + D4DS-K3
(with Top-inserted Operation Key)
(with Front-inserted Operation Key)
(38)
Horizontal
insertion radius:
R ≥ 50
52.5 min. 55 max.
(40)
Key insertion position
Center
tolerance of
key hole: ±1
Vertical
insertion radius:
R ≥ 200
Center
tolerance of
key hole: ±1
53.5 min. 56.0 max.
Key insertion position
D4GL + D4DS-K5
(with Top-inserted Operation Key)
D4GL + D4DS-K5
(with Front-inserted Operation Key)
(38)
Center
tolerance of
key hole: ±1
(15.2)
(40)
(39)
53.5 min. 56.0 max.
Key insertion position
Vertical
insertion radius:
R ≥ 200
(39)
(31.7)
Center
tolerance of
key hole: ±1
Horizontal
insertion radius:
R ≥ 50
Horizontal
insertion radius:
R ≥ 50
59.5 min. 62 max.
(41 or 43)
Key insertion position
Center
tolerance of
key hole: ±1
Vertical
insertion radius:
R ≥ 50
43±0.1
41±0.1
Center
tolerance of
key hole: ±1
60.4 min. 62.9 max.
Key insertion position
Horizontal
insertion radius:
R ≥ 50
Center
tolerance of
key hole: ±1
(15.2)
(39)
Center
tolerance of
key hole: ±1
(39)
(31.7)
Horizontal
insertion radius:
R ≥ 50
60.4 min. 62.9 max.
Key insertion position
14
D4GL/D4GL-SK10-LK@
Application Examples
PL/safety category
Model
Stop category
Reset
1
Manual
Guard Lock Safety-door Switch D4GL-@AFA-@ (Mechanical Lock Type)
Safety Relay Unit G9SA-321-T@ (24 VAC/VDC)
PLd/3 equivalent
Note: The above PL is only the evaluation result of the example. The PL must be evaluated in an actual application by the customer after confirming the usage conditions.
●Application Overview
•
•
•
•
•
The stop signal is sent to the motor controller.
The power supply to the motor M is turned OFF after OFF-delay time.
The lock release signal enables the guard to be opened.
The S1 and S2 monitor the guard, and the power supply to the motor M is kept OFF while the guard is opened.
The power supply to the motor M is turned ON again when the reset switch S3 is pressed while the guard is closed and locked.
Lock release signal
KM1
KM2
S2
S4
42
54
41
53
S1:
12
34
11
33
Safety Limit Switch
with direct opening mechanism
(D4B-N, D4N, D4F)
S2:
Guard Lock Safety-door Switch
S3:
Reset switch
S4:
Lock release switch
KM1 and KM2: Magnetic Contactor
M:
3-phase motor
PLC
PLC
Guard
11
S1
OPEN
Feedback loop
KM1
12
KM2
S3
Stop signal
A1 A2 T11
T31
T12
T32
13
1
TH
a
K1
K3
SA
K4
a
K1
b
K2
K4
61
3
4
K3
K2
23 33 43 53
Off delay
timer
Control
circuit
b
JP
2 K1
5
K2
1
2
3
4
5
6
6
PE T21
T23 T22
A
B
14
24 34 44 54
KM1
62
KM2
Guard opens
Timing Chart
Limit switch S1
Guard Lock
Safety-door
Switch S2
Lock release
signal
Operation
instruction
Motor controller
KM1
S4
Guard can be opened
KM2
Stop signal
Reset switch
S3
K1 and K2
(NC)
K1 and K2
(NO)
K3 and K4
(NC)
K3 and K4
(NO)
KM1 and KM2
(NC)
KM1 and KM2
(NO)
M
Operation
instruction
Motor rotation
OFF-delay time
15
D4GL/D4GL-SK10-LK@
PL/safety category
PLe/4 equivalent
Model
Guard Lock Safety-door Switch D4GL-@AFG-@ (Solenoid Lock Type)
Safety Relay Unit G9SA-301 (24 VAC/VDC)
Stop category
Reset
0
Auto
Note: The above PL is only the evaluation result of the example. The PL must be evaluated in an actual application by the customer after confirming the usage conditions.
●Application Overview
•
•
•
•
The power supply to the motor M is turned OFF immediately by the stop signal.
The guard can be opened by turning OFF the lock signal.
The S1 and S2 monitor the guard, and the power supply to the motor M is kept OFF while the guard is opened.
The power supply to the motor M is turned ON again when the guard is closed and locked.
Lock signal
S2
42
S1:
Safety Limit Switch
with direct opening mechanism
(D4B-N, D4N, D4F)
S2:
Guard Lock Safety-door Switch
KM1 and KM2: Magnetic Contactor
M:
3-phase motor
54
41
53
12
34
11
33
PLC
S1
PLC
Guard
12
OPEN
Feedback loop
11
KM1
KM2
Operation signal
A1 A2 T11
T31
T12
T32
TH
a
13 23 33 41
3
4
1
K1
K1 K2
SA
K2
K1
b
K2
a
b
Control
Circuit
2
5
JP
1
2
3
4
5
6
6
PE T21
T23 T22
A
B
14 24 34 42
KM1 KM2
Stop
instruction
Motor controller
KM1
Timing Chart
Limit switch S1
Guard opens
KM2
Guard Lock Safety-door Switch S2
Operation signal
M
Lock signal
K1 and K2
(NC)
K1 and K2
(NO)
KM1 and KM2
(NC)
Note: The lock can be released at any time. Therefore, do not
use a model with a solenoid lock in applications where
the operator may be exposed to danger when the guard
opens. Use a model with a mechanical lock.
KM1 and KM2
(NO)
16
D4GL/D4GL-SK10-LK@
Safety Precautions
Be sure to read the precautions for All Safety Door Switches in the website at:http://www.ia.omron.com/.
Indication and Meaning for Safe Use
DANGER
Indicates an imminently hazardous
situation which, if not avoided, is likely to
result in serious injury or may result in
death. Additionally there may be severe
property damage.
CAUTION
Indicates a potentially hazardous situation
which, if not avoided, may result in minor
or moderate injury or in property damage.
Precautions
for Safe Use
Supplementary comments on what to do
or avoid doing, to use the product safely.
Precautions
for Correct
Use
Supplementary comments on what to do
or avoid doing, to prevent failure to
operate, or undesirable effect on product
performance.
Wiring
• Do not switch circuits for two or more standard loads (125 VAC,
1 A). Doing so may adversely affect insulation performance.
• Always attach the cover after completing wiring and before using
the Switch. Do not supply power when the cover is not attached.
Electric shock may occur if the Switch is used without the cover
attached.
Installation
• Make sure the Switch is mounted securely to prevent it from falling
off. Otherwise injury may result.
• Do not use a Switch as a stopper.
• Be sure to install a stopper as shown in the following illustration
when mounting the Switch and adjust the stopper so that the
Operation Key is within the setting zone. (Setting zone: 0.5 to 3.0
mm)
Stopper
Set zone
(0.5 to 3 mm)
DANGER
Injury may occasionally occur. Always check to make
sure that the safety functions operate correctly before
using the machine. The safety functions may not operate
correctly because of wiring mistakes, setting mistakes,
or Switch malfunction, causing some machines to
continue operating in situations where they should be
stopped.
Injury may occasionally occur. If the machine is used
with the release key in the UNLOCK position, the
electromagnetic lock may not operate, causing some
machines to continue operating in situations where they
should be stopped. Be sure to put the release key in the
LOCK position before using the machine. Also, check
the condition of the lock and safety circuits.
Injury may occasionally occur. Always ensure that the
release key is set to "UNLOCK" or that the Operation
Key is inserted before changing the direction of the head.
Not doing so may damage the Switch, causing some
machines to continue operating in situations where they
should be stopped. Refer to “Release Key” on page 17.
Injury may occasionally occur. When the
electromagnetic lock function or Switch function is
damaged, some machines may continue operating in
situations where they should be stopped. Do not use the
electromagnetic lock function of the Switch in place of a
door lock. Always provide a lock separate from the
Switch, attach a warning seal to prevent people from
using excessive force to open the door when it is locked,
or provide an indicator lamp to show the locked/unlocked
status of the door.
!CAUTION
Electric shock may occasionally occur.
Do not use metal connectors or metal conduits.
Operation Key
• Do not subject the Switch to a shock that exceeds the Switch's
shock resistance of 1,000 m/s2.
Precautions for Correct Use
The Switch contacts can be used with either standard loads or
microloads. Once the contacts have been used to switch a load,
however, they cannot be used to switch smaller loads. The contact
surfaces will become rough once they have been used and contact
reliability for smaller loads may be reduced.
Release Key
• The release key is used to unlock the Switch in case of emergency
or if the power supply to the Switch stops.
• If the release key setting is changed from LOCK to UNLOCK, the
lock will be released and the safety door can be opened
(mechanical lock models only).
• After setting the release key to UNLOCK to, for example, perform
maintenance, be sure to return it to LOCK setting before resuming
operation.
• Do not use the release key to start or stop machines.
• The auxiliary lock must be released only by authorized personnel.
• Do not impose a force exceeding 0.5 N·m on the release key
screws. The release key may be damaged and may not operate
properly.
• The release key is set in the unlock position at the factory for the
D4GL-@@@A and to the lock position for the D4GL-@@@G.
• To prevent the release key from being used by unauthorized
personnel, set it to LOCK and seal it with sealing wax.
Figure 1
Precautions for Safe Use
Installation Environment
• Do not use the Switch submersed in oil or water or in locations
continuously subject to splashes of oil or water. Doing so may
result in oil or water entering the Switch. (The IP67 degree of
protection of the Switch specifies the amount of water penetration
after the Switch is submerged in water for a certain period of time.)
D4GL-@@@A-@
D4GL-@@@G-@
D4GL-@@@A-@4
D4GL-@@@G-@4
17
D4GL/D4GL-SK10-LK@
Hinged Door
Head Direction
If the Switch is mounted too close to the hinge, the force imposed on
the lock will be much larger than for locations far from the hinge and
the lock may be damaged. Mount the Switch close to the handle.
Solenoid Lock Models
The solenoid lock locks the door only when power is supplied to the
solenoid. Therefore, the door will be unlocked if the power supply to
the solenoid stops. Therefore, do not use solenoid lock models for
machines that may be operating and dangerous even after the
machine stops operating.
• Remove the four screws of the head to enable changing the
mounting direction of the head. The head can be mounted in four
directions. Ensure that no foreign material enters the interior of the
Switch. Also, insert the head until the insertion line engraved on the
head is hidden by the reference line on the Switch, as shown in the
following diagram.
• Do not insert or remove the Operation Key with the Switch head
removed. Doing so may make it impossible to insert the Operation
Key.
Insertion line
Mounting
Reference line
Appropriate Tightening Torque
• Be sure to tighten each screw of the Switch properly. Loose screws
may result in malfunction.
Terminal screw
0.4 to 0.5 N·m
Cover mounting screw
0.5 to 0.7 N·m
Securing the Door
Head mounting screw
0.5 to 0.6 N·m
Operation Key mounting
screw
2.4 to 2.8 N·m
Switch mounting screw
1.3 to 1.5 N·m
When the door is closed (with the Operation Key inserted), the
Operation Key may exceed the set zone because of, for example, the
door's own weight, machine vibration, or the door cushion rubber.
Then, when an attempt is made to open the door, it may result in
damage or malfunction. Also, it may not be possible to unlock the
Switch if there is weight placed on the Operation Key. Do not rely on
the Switch to substitute for a door locking device. Secure the door with
a stopper so that the Operation Key remains within the set zone.
1.8 to 2.1 N·m
Connector
1.4 to 1.8 N·m
Cap screw
1.3 to 1.7 N·m
• When loosening a screw with an electrical screwdriver or similar
tool while pressing down on the screw head, do not continue
turning the screw past the point where the threads disengage.
Doing so may strip the end of the threads.
Set zone
(0.5 to 3 mm)
Switch and Operation Key Mounting
• Mount the Switch and Operation Key securely to the applicable
tightening torque with M5 screws for the Switch and M4 screws for
the Operation Key. Always use spring washers. To ensure safety,
use screws that cannot be easily removed or another means to
prevent the Switch and Operation Key from easily being removed.
• Do not operate the Switch with anything other than the special
OMRON Operation Key. Otherwise, the Switch may be damaged
and the safety of the system may not be maintained.
]
D4DS-K1/-K2
Four, M5
Two, M4
15 ±0.1
84 ±0.2
D4DS-K3
Two, M4
40 ±0.1
D4DS-K5
30 ±0.1
Two, M4
41±0.1 or 43±0.1
• Ensure that the alignment offset between the Operation Key and
the key hole does not exceed ±1 mm. If the Operation Key is offset
or at an angle, accelerated wear or damage to the Switch may
result.
• Observe the specified insertion radius for the Operation Key and
insert it in a direction perpendicular to the key hole.
• Do not impose excessive force on the Operation Key while the Key
is inserted into the Switch or drop the Switch with the Operation
Key inserted. Doing either of these may deform the Key or break
the Switch.
Operation key
Solenoid
• The solenoid will heat when it carries current. Do not touch it.
• The solenoid has polarity. Confirm terminal polarity before wiring it.
Wiring
Circuit Connection Example for the D4GL-@H@@-A
• Direct opening contacts used as safety-circuit inputs are indicated
with the
mark. Terminals 11 and 42, and terminals 21 and 22
have direct opening contacts.
• Connect terminals 21 and 22 and terminals 51 and 52 in series
when using as safety-circuit inputs (redundancy circuit for
terminals 11 and 12 and terminals 41 and 42 below). Connect the
terminals individually when using as auxiliary-circuit inputs (e.g.,
terminals 21 and 22 for safety-door open/closed monitoring and
terminals 51 and 52 for monitoring the lock status).
• In the following connection example, terminals 21 and 22 and
terminals 51 and 52 are used as auxiliary-circuit inputs.
• Connect the indicators in parallel to the auxiliary circuits or
terminals E1 and E2.
• Although the 3 lines are connected at the time of delivery, rewire
them as necessary for the application.
18
D4GL/D4GL-SK10-LK@
• The following table shows the connection configuration required to
make the green indicator light when the door is closed and the
orange indicator light when the solenoid turns ON.
Terminal
number
Indicator
Green indicator
O1
Lead wire
color
Green
Connected
terminal
number
31
Orange indicator O3
Orange
E1
Common
Black
E2
O2
51
12
41
42
11
52
21
22
31
32
O1 (Green)
LED
(Green)
Auxiliary
circuit
• Connect a recommended connector to the opening of the conduit
and tighten the connector to the proper torque. The case may be
damaged if excessive tightening torque is applied.
• Make sure that the outer diameter of the cable connected to the
connector is correct.
• Attach a conduit cap to the unused conduit opening when wiring
and tighten it to a suitable torque. The conduit cap is provided with
the Switch.
Recommended Connectors
• Use a connector with a screw section not exceeding 10 mm.
Otherwise the screws will protrude into the case interior.
The connectors given in the following table have connectors with
screw sections not exceeding 10 mm.
Use the following connectors to ensure conformance to IP67.
Auxiliary
circuit
Auxiliary
circuit
Size
Manufacturer
Model
O2
(Black)
E2
E1
O3 (Orange)
Safety
circuit
Processing the Conduit Opening
LAPP
Solenoid
G1/2
LED
(Orange)
Wiring Precautions
• Do not wire the Switch while power is being supplied. Doing so may
result in electric shock.
• Do not let particles, such as small pieces of lead wire, enter the
switch body when wiring.
• Applicable lead wire size: AWG24 to AWG22 (0.2 to 0.3 mm2).
Use lead wires of an appropriate length. Not doing so may result in
excess length causing the cover to rise and not fit properly.
• Do not push crimp terminals into gaps in the case interior. Doing so
may cause damage or deformation of the case.
• Use crimp terminals that will not interfere with other components
inside the case.
ST-PF1/2
5380-1002
OHM ELECTRIC OA-W1609
CO.
OA-W1611
Applicable
cable
diameter
6.0 to 12.0 mm
7.0 to 9.0 mm
9.0 to 11.0 mm
Pg13.5
LAPP
S-13.5
5301-5030
6.0 to 12.0 mm
M20
LAPP
ST-M20 × 1.5
5311-1020
7.0 to 13.0 mm
Use LAPP connectors together with Seal Packing (JPK-16,
GP-13.5, or GPM20), and tighten to the applicable torque. Seal
Packing is sold separately.
• LAPP is a German manufacturer.
• OHM Electric Co. is a Japanese manufacturer.
Recommended Crimp Terminals
Manufacturer
J.S.T. Mfg Co.
Model
FN0.5-3 (F Type)
No. 5-3 (Straight Type)
• The terminal block screws and contact numbers correspond as
shown in the following diagram. The numbers are provided on the
terminal cover. Confirm terminal numbers against the terminal
block terminal symbols when wiring.
19
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at
Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
2014.9
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2014 All Right Reserved.
工商网监
湘ICP备2023018690号
