D5VA3P1

Contact Displacement Sensor Built into Amplifier D5V Displacement/ Length Sensors Contact Displacement Sensor Integrated with Amplifier Enables Inline Measurement of a Wide Range of Objects at a Low Operating Force Sensing ■ Works with a low operating force (0.29 N) to detect a wide Guide variety of objects including glass, plastic, and rubber objects. Smart Sensors ■ Models with digital output for B7A Units and models with Displacement Sensors Length Sensors Other Information 4- to 20-mA linear output corresponding to the 0- to 5-mm measurement range are available. ■ Three types of measurement head can be selected according to the object: Ball, pin, or flat. ■ The XS3 Sensor I/O Connector makes Sensor connections simple. Ordering Information Measurement range Output specifications Actuator Resolution Ball type 4 to 20 mA Pin type Model D5VA-3B1 10 µm D5VA-3P1 Flat type *1 D5VA-3F1 Ball type D5VM-3B1 5 mm B7A serial communicaPin type tions output *2 Flat type *1 1 µm D5VM-3P1 D5VM-3F1 *1. Flat-type actuators have a hole 5-mm deep for an M2.5 screw in the tip so that an actuator can be mounted externally. *2. Use the D5VM-3@1 in combination with the B7A Link Terminal Output Unit or a C200H or CQM1 B7A Interface Unit. Use 16- or 32-point Units with a standard transmission delay time (19.2 ms). (A high-speed type cannot be used). Z300 Z500 Z550 Z4D-F Z4W-V E4PA-N E4DA D5V 442 Approved Standard Ratings Conformance to EN50081-1, pr50082-2 Rated current 100 mA Rated voltage 24 VDC D5V Ratings and Specifications Item Model D5VA-3@1 Power Supply voltage 12 to 24 VDC±10% *1 Current consumption 80 mA max. Measurement range 5 mm Maximum actuator travel distance Approx. 5.7 mm D5VM-3@1 Offset adjustment range ±0.25 mm Resolution 10 µm Linearity 0.5% FS max. Repeat accuracy 10 µm max. Response time 6 ms max. Operating force 0.3 N max. Output Linear current output: 4 to 20 mA (Allowable load resistance: 0 to 300 Ω) Mounting method Two M4 screws Indicators Power and overtravel indicators Mechanical durability 10,000,000 operations min. Temperature influence ±0.04% FS/°C max. Operating temperature −10 to 55 °C (with no icing or condensation) Displacement/ Length Sensors 1 µm 37 ms max. (including transmission delay time) Sensing Guide B7A serial communications output (BCD and multipoint ON/OFF output modes *2) Smart Sensors Displacement Sensors Power, overtravel, setting, and output indicators Length Sensors Storage temperature −25 to 65 °C (with no icing or condensation) Humidity range 35% to 85% (with no icing or condensation) Insulation resistance 100 MΩ min. (at 100 VDC) Dielectric strength 1,000 VAC, 50/60 Hz for 1 min Noise resistance Noise level: 1.5 kV with a pulse width of 100 ns to 1 µs Vibration resistance 10 to 55 Hz, 0.75-mm double amplitude Shock resistance 196 m/s2 Connection cable 2 m (XS3F-M421-402-R provided) Weight Approx. 80 g (without cable) Material ABS and PC polymer alloy Other Information *1. If power is supplied to both the D5VM-3@1 and B7A Output Link Terminal from a single power supply, the supply voltage must be 24 VDC±10%. *2. BCD or multipoint output mode can be selected with the mode selector. Dimensions (The illustration shows the D5VA-@@@.) 9 D5VA-3B1 D5VM-3B1 XS3F-M421-402-R Connection cable (Length: 2 m) 4 dia. 18.6 D5VA-3P1 D5VM-3P1 (Unit: mm) 9 XS3F-M421-402-R Connection cable (Length: 2 m) 4 dia. 18.6 32.7 10.4 D5VA-3F1 D5VM-3F1 9 18.6 32.7 10.4 9 dia. 5.7 9 dia. 5.7 5.7 60 60 38±0.1 Reference Plain Two, 4.2 dia. 60 38±0.1 Two, 4.2 dia. Reference Plain 7 Reference Plain 7 6 25 L16 FP (16.2) 6 L31 FP (31.2) SR1.5 38±0.1 7 L20.5 FP (20.7) 6 32.7 10.4 9 dia. Two, 4.2 dia. XS3F-M421-402-R Connection cable (Length: 2 m) 4 dia. 5.5 dia. 25 1 dia. Z300 Z500 M2.5 (Depth: 5 mm) 25 Z550 17.6 18 17.6 18 17.6 18 Z4D-F 40 40 40 Mounting Hole Dimensions Mounting Hole Dimensions Mounting Hole Dimensions Two, M4 or 4.3 dia. Two, M4 or 4.3 dia. Z4W-V Two, M4 or 4.3 dia. E4PA-N 38±0.3 CAD data 38±0.3 CAD data 38±0.3 CAD data The output at position “L” is set at the factory to 4 mA for the D5VA, and to 0000 for the D5VM (BCD mode). In the free position (FP), EEEE is output, and when pressed in excess of the measurement range, FFFF is output. E4DA D5V For safety precautions and further details, refer to Contact Displacement Sensors Series Catalog (Cat. No. X071). Cat. No. F802-E1-01 In the interest of product improvement, specifications are subject to change without notice. 443