E2AW-M30LS10-M1-B1

Weld Field Immune Inductive Proximity Sensors E2AW Cylindrical Weld Field Immune DC 3-Wire & AC/DC 2-Wire Proximity Sensors Resist Weld Slag Build-up • Weld field immunity and noise immunity ideal for automotive welding environments • Coated metal housings resist weld slag • High-temperature abrasion-resistant coating on sensing face sheds weld slag • Choose from M12, M18 and M30 connector versions • DC 3-wire PNP-N.O. or AC/DC 2-wire shielded and unshielded models • WFI rated to 20,000 Amps @ 1 inch C Ordering Information Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery. ■ Sensors With Built-in 4-pin Euro Connector DC 3-Wire, PNP-N.O. Type Shielded Unshielded Barrel size Sensing distance Connector type Model PNP N.O. M12 2mm 4-Pin Euro E2AW-M12LS02-M1-B1 M18 5mm 4-Pin Euro E2AW-M18LS05-M1-B1 M30 10mm 4-Pin Euro E2AW-M30LS10-M1-B1 M12 4mm 4-Pin Euro E2AW-M12LN04-M1-B1 M18 8mm 4-Pin Euro E2AW-M18LN08-M1-B1 M30 15mm 4-Pin Euro E2AW-M30LN15-M1-B1 ■ Sensors With Built-in 3-pin Micro Connector or Mini Connector AC/DC 2-Wire, N.O. Type Shielded Unshielded Barrel size Sensing distance Connector type Model AC/DC 2-Wire N.O. M18 5mm 3-Pin Micro M18 5mm 3-Pin Mini E2AW-M18LS05-MN3-T1 M18 5mm 3-Pin Mini E2AW-M18LS05-MN390-T1 M30 10mm 3-Pin Micro M30 10mm 3-Pin Mini M18 8mm 3-Pin Micro M18 8mm 3-Pin Mini E2AW-M18LN08-MN3-T1 M18 8mm 3-Pin Mini E2AW-M18LN08-MN390-T1 M30 15mm 3-Pin Micro M30 15mm 3-Pin Mini E2AW-M18LS05-M4-T1 See Note E2AW-M30LS10-M4-T1 E2AW-M30LS10-MN3-T1 E2AW-M18LN08-M4-T1 See Note E2AW-M30LN15-M4-T1 E2AW-M30LN15-MN3-T1 Note: The connector end of the sensor is rotated down 90 degrees. See dimensional drawing. Weld Field Immune Inductive Proximity Sensors E2AW 1 ■ Mating Connector Cordsets Male views shown 3 Wire DC N.O. 2 Wire AC/DC N.O. GND 1 2 3 2 Wire AC/DC N.O. 2 N.O. Load 4 3 GND 1 (+DC) 1 L1 2 3 N.O. Load N.O. Load (-DC) Euro L1 Mini Micro ■ Replacement Parts I.D. Metal mounting nuts for E2AW Dimensions in millimeters Model Clamping locknuts Black serrated lock washer A B C 12mm (17) (19.5) (5.6) Y92E-80003 Y92E-00139 18mm (23.8) (26.9) (4.1) Y92E-80002 Y92E-00137 30mm (36.6) (42.2) (4.8) Y92E-80001 Y92E-00138 ‘B’ ‘A’ ‘C’ Note: All E2AW Cylindrical Proximity sensors are originally supplied with two (2) clamping locknuts and two (2) serrated lock washers. The replacement hardware listed above is sold in packages of 10. Example: Quantity 1 Y92E-80003 consists of 10 12mm mounting nuts only, quantity 1 Y92E-00139 consists of 10 12mm serrated lock washers only. ■ Accessories Please refer to the Y92E data sheet, publication number D04I-E-01, for a complete listing of proximity sensor accessories. 2 Weld Field Immune Inductive Proximity Sensors E2AW Specifications ■ DC 3-Wire Sensors Model E2AW-M12LS@ E2AW-M12LN@ E2AW-M18LS@ E2AW-M18LN@ M18 E2AWM30LS@ E2AW-M30LN@ Size M12 M30 Type Shielded Unshielded Shielded Unshielded Shielded Unshielded Sensing distance 2mm ± 10% 4mm ± 10% 5mm ± 10% 8mm ± 10% 10mm ± 10% 15mm± 10% Sensing object Ferrous metals approximately the same size as the proximity sensing face for shielded models and twice the size of the sensing face for unshielded models. The specified sensing distances above are based upon tests with mild steel standard targets. Other materials will reduce the sensing range (Sn) as follows: Stainless Steel Sn x 0.85, Brass Sn x 0.5, Copper Sn x 0.46 Aluminum Sn x 0.40 Hysteresis 10% max. of sensing distance Repeatability < ±1% Supply voltage (operating voltage range) 12 to 24 VDC ripple (p-p): 10% max. (10 to 30 VDC) Use a class 2 power source only. Current consumption 10 mA max. Power-up time < 45ms Response frequency 16Hz (See note) Response time 30ms Control output PNP-NO Switching capacity 200mA Max. switching frequency 15Hz Voltage drop < 2 VDC @