Proximity Sensor
E2E/E2EQ NEXT Series
DC 3-Wire
Enables easier and standardized designs
previously not possible
• Exceptional sensing distance*1. Nearly double the sensing
distance of previous models.
• With high-brightness LED, indicator is visible 360° around.
• Only 10 seconds*2 to replace a Proximity Sensor with the Quick
fix (Mounting Sleeve).
• Cables with enhanced oil resistance have 2-year oil resistance*3.
• IP69K compliant for water resistance and wash resistance*4
• UL certification (UL60947-5-2)*5 and CSA certification (CSA
C22.2 UL60947-5-2-14)
• All PNP models come standard with IO-Link
*1.
*2.
*3.
*4.
*5.
For the most recent information on models that have been
certified for safety standards, refer to your OMRON website.
Based on December 2018 OMRON investigation.
Time required to adjust the distance when installing a Sensor. Based on OMRON investigation.
Refer to Ratings and Specifications for details. However, E2E Connector Models and E2EQ series is excluded.
E2EQ series is excluded.
M8 (4-pin) Connector Models are not UL certified.
Be sure to read Safety Precautions on page 47.
Features
PREMIUM Model
Quadruple distance model
User-friendly design
9mm [M12]
Exceptional
sensing
range
*6
9
[M12]
mm
*7
• The PREMIUM Model, which has longer detection
range than previous models, allows for flexible designs
with lower risk of collision.
• Enables users to standardize sesors sizes to reduce
inventory needs.
Triple distance model
6mm [M12]
*6. Based on December 2018 OMRON investigation.
*7. Quadruple distance models of M12 sized
New standards for usability
Early error detection
BASIC Model
In addition to our HIGH SPEC Models, we also
offer mid/short-distance BASIC Models, to
1
Fewer unexpected
equipment shutdowns
location, all new E2E Sensors
can be monitored
Strong resistance to
cutting oil
with IO-Link
Double distance model
4mm [M12]
Single distance model
2mm [M12]
-year *3
oil resistance *9
ent design requirement
meet various equipment
specifications.
2
*9. E2E Connector Models and E2EQ series is
excluded.
Quick recovery
10
360°
second replaceable
with quick fix (adaptor)*8
degree view
with high visibility
LED indicator
*8. Time required to adjust the distance when installing a Sensor. Based on OMRON investigation.
1
E2E/E2EQ NEXT Series
E2E/E2EQ NEXT Series Model Number Legend
DC 3-wire
E2E
(1) - X (2) (3) (4) (5) (6) (7) - (8) - (9) - (10)
No.
Type
(1)
Case
(2)
Sensing distance
(3)
Shielding
(4)
Output configuration
(5)
Operation mode
Code
Blank
IO-Link baud rate
With spatter-resistant coating
Number
Sensing distance (Unit: mm)
(R: Indication of decimal point)
Blank
(8)
Body size
Size
Unshielded
B
PNP open collector
C
NPN open collector
1
Normally open (NO)
2
Normally closed (NC)
IO-Link baud rate
D
COM2 (38.4 kbps)
Blank
Long Body
8
M8
12
M12
18
M18
M12 Connector Models
M3
M8 (4-pin) Connector Models
M5
M8 (3-pin) Connector Models
M1TJR
Cable specifications *
M30
Pre-wired Models
M1
M1TJ
(10)
COM3 (230.4 kbps)
Standard
L
Blank
Connection method
Normally open, Normally closed (NO+NC)
Blank
30
(9)
Shielded
M
T
(7)
Meaning
Without spatter-resistant coating
Q
3
(6)
(11)
Blank
R
(11)
Cable length
Number M
* (10) is only shown in the model number of Pre-wired Models.
M12 Pre-wired Smartclick Connector Models (pigtail)
M12 Pre-wired Smartclick Connector Models
Robot (bending-resistant) cable (robot pigtail)
Standard PVC cable
Robot (bending-resistant) cable
Cable length
Note: The purpose of this model number legend is to provide understanding of the meaning of specifications from the model number.
Models are not available for all combinations of code numbers.
2
E2E/E2EQ NEXT Series
Ordering Information
PREMIUM Model
E2E NEXT Series (Quadruple distance model)
DC 3-wire [Refer to Dimensions on page 50.]
Shielded *1
Size (Sensing
distance)
Connection method
Body size
38 mm *3
Pre-wired (2 m) *2
48 mm
M12 Pre-wired
Smartclick Connector (0.3 m)
38 mm *4
48 mm
43 mm
M8 (4 mm)
M12 Connector
53 mm
39 mm
M8 Connector (4-pin)
49 mm
39 mm
M8 Connector (3-pin)
49 mm
47 mm *3
Pre-wired (2 m) *2
69 mm
M12 Pre-wired
M12 (9 mm) Smartclick Connector (0.3 m)
47 mm *4
69 mm
48 mm
M12 Connector
70 mm
55 mm *3
Pre-wired (2 m) *2
77 mm
M12 Pre-wired
M18 (14 mm) Smartclick Connector (0.3 m)
55 mm *4
77 mm
53 mm
M12 Connector
75 mm
Operation
mode
Model
PNP
NPN
NO
E2E-X4B1D8 2M
E2E-X4C18 2M
NC
E2E-X4B28 2M
E2E-X4C28 2M
NO
E2E-X4B1DL8 2M
E2E-X4C1L8 2M
NC
E2E-X4B2L8 2M
E2E-X4C2L8 2M
NO
E2E-X4B1D8-M1TJ 0.3M
E2E-X4C18-M1TJ 0.3M
NC
E2E-X4B28-M1TJ 0.3M
E2E-X4C28-M1TJ 0.3M
NO
E2E-X4B1DL8-M1TJ 0.3M
E2E-X4C1L8-M1TJ 0.3M
NC
E2E-X4B2L8-M1TJ 0.3M
E2E-X4C2L8-M1TJ 0.3M
NO
E2E-X4B1D8-M1
E2E-X4C18-M1
NC
E2E-X4B28-M1
E2E-X4C28-M1
NO
E2E-X4B1DL8-M1
E2E-X4C1L8-M1
NC
E2E-X4B2L8-M1
E2E-X4C2L8-M1
NO
E2E-X4B1D8-M3
E2E-X4C18-M3
NC
E2E-X4B28-M3
E2E-X4C28-M3
NO
E2E-X4B1DL8-M3
E2E-X4C1L8-M3
NC
E2E-X4B2L8-M3
E2E-X4C2L8-M3
NO
E2E-X4B1D8-M5
E2E-X4C18-M5
NC
E2E-X4B28-M5
E2E-X4C28-M5
NO
E2E-X4B1DL8-M5
E2E-X4C1L8-M5
NC
E2E-X4B2L8-M5
E2E-X4C2L8-M5
NO
E2E-X9B1D12 2M
E2E-X9C112 2M
NC
E2E-X9B212 2M
E2E-X9C212 2M
NO
E2E-X9B1DL12 2M
E2E-X9C1L12 2M
NC
E2E-X9B2L12 2M
E2E-X9C2L12 2M
NO
E2E-X9B1D12-M1TJ 0.3M
E2E-X9C112-M1TJ 0.3M
NC
E2E-X9B212-M1TJ 0.3M
E2E-X9C212-M1TJ 0.3M
NO
E2E-X9B1DL12-M1TJ 0.3M
E2E-X9C1L12-M1TJ 0.3M
NC
E2E-X9B2L12-M1TJ 0.3M
E2E-X9C2L12-M1TJ 0.3M
NO
E2E-X9B1D12-M1
E2E-X9C112-M1
NC
E2E-X9B212-M1
E2E-X9C212-M1
NO
E2E-X9B1DL12-M1
E2E-X9C1L12-M1
NC
E2E-X9B2L12-M1
E2E-X9C2L12-M1
NO
E2E-X14B1D18 2M
E2E-X14C118 2M
NC
E2E-X14B218 2M
E2E-X14C218 2M
NO
E2E-X14B1DL18 2M
E2E-X14C1L18 2M
NC
E2E-X14B2L18 2M
E2E-X14C2L18 2M
NO
E2E-X14B1D18-M1TJ 0.3M
E2E-X14C118-M1TJ 0.3M
NC
E2E-X14B218-M1TJ 0.3M
E2E-X14C218-M1TJ 0.3M
NO
E2E-X14B1DL18-M1TJ 0.3M
E2E-X14C1L18-M1TJ 0.3M
NC
E2E-X14B2L18-M1TJ 0.3M
E2E-X14C2L18-M1TJ 0.3M
NO
E2E-X14B1D18-M1
E2E-X14C118-M1
NC
E2E-X14B218-M1
E2E-X14C218-M1
NO
E2E-X14B1DL18-M1
E2E-X14C1L18-M1
NC
E2E-X14B2L18-M1
E2E-X14C2L18-M1
3
E2E/E2EQ NEXT Series
PREMIUM Model
Size (Sensing
distance)
Connection method
Body size
60 mm *2
Pre-wired (2 m) *2
82 mm
M12 Pre-wired Smartclick
M30 (23 mm) Connector (0.3 m)
60 mm *4
82 mm
58 mm
M12 Connector
80 mm
Operation
mode
Model
PNP
NPN
NO
E2E-X23B1D30 2M
E2E-X23C130 2M
NC
E2E-X23B230 2M
E2E-X23C230 2M
NO
E2E-X23B1DL30 2M
E2E-X23C1L30 2M
NC
E2E-X23B2L30 2M
E2E-X23C2L30 2M
NO
E2E-X23B1D30-M1TJ 0.3M
E2E-X23C130-M1TJ 0.3M
NC
E2E-X23B230-M1TJ 0.3M
E2E-X23C230-M1TJ 0.3M
NO
E2E-X23B1DL30-M1TJ 0.3M
E2E-X23C1L30-M1TJ 0.3M
NC
E2E-X23B2L30-M1TJ 0.3M
E2E-X23C2L30-M1TJ 0.3M
NO
E2E-X23B1D30-M1
E2E-X23C130-M1
NC
E2E-X23B230-M1
E2E-X23C230-M1
NO
E2E-X23B1DL30-M1
E2E-X23C1L30-M1
NC
E2E-X23B2L30-M1
E2E-X23C2L30-M1
*1. When embedding the Proximity Sensor in metal, refer to Influence of Surrounding Metal on page 48.
*2. Models with 5-m cable length are also available with "5M" suffix. (Example: E2E-X9B1D12 5M)
*3. Models with 2-m and 5-m robot (bending-resistant) cables are also available with "-R" in the model number. (Example: E2E-X9B1D12-R 2M/
E2E-X9B1D12-R 5M)
*4. Models with M12 Smartclick connector model robot (bending-resistant) cables are also available with "R" in the model number. (Example: E2EX9B1D12-M1TJR 0.3M)
Note: 1. Models in
are equipped with IO-Link (COM2). For IO-Link (COM3), select a model number with the format of "E2E-X□□□T□"
(Example: E2E-X9B1T12 2M).
Operation mode NO can be changed to NC via IO-Link communications.
2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
4
E2E/E2EQ NEXT Series
PREMIUM Model
E2E NEXT Series (Quadruple distance model)
DC 3-wire [Refer to Dimensions on page 50.]
Unshielded
Size (Sensing
distance)
Connection method
Body size
38 mm *2
Pre-wired (2 m) *1
48 mm
M12 Pre-wired
Smartclick Connector (0.3 m)
M8
(8 mm)
38 mm *3
48 mm
43 mm
M12 Connector
53 mm
39 mm
M8 Connector (4-pin)
49 mm
39 mm
M8 Connector (3-pin)
49 mm
47 mm *2
Pre-wired (2 m) *1
69 mm
M12
(16 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
47 mm *3
69 mm
48 mm
M12 Connector
70 mm
Pre-wired (2 m) *1
M18
(30 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
M12 Connector
Pre-wired (2 m) *1
M30
(50 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
M12 Connector
77 mm *2
77 mm *3
75 mm
97 mm *2
97 mm *3
95 mm
Operation
mode
Model
PNP
NPN
NO
E2E-X8MB1D8 2M
E2E-X8MC18 2M
NC
E2E-X8MB28 2M
E2E-X8MC28 2M
NO
E2E-X8MB1DL8 2M
E2E-X8MC1L8 2M
NC
E2E-X8MB2L8 2M
E2E-X8MC2L8 2M
NO
E2E-X8MB1D8-M1TJ 0.3M
E2E-X8MC18-M1TJ 0.3M
NC
E2E-X8MB28-M1TJ 0.3M
E2E-X8MC28-M1TJ 0.3M
NO
E2E-X8MB1DL8-M1TJ 0.3M
E2E-X8MC1L8-M1TJ 0.3M
NC
E2E-X8MB2L8-M1TJ 0.3M
E2E-X8MC2L8-M1TJ 0.3M
NO
E2E-X8MB1D8-M1
E2E-X8MC18-M1
NC
E2E-X8MB28-M1
E2E-X8MC28-M1
NO
E2E-X8MB1DL8-M1
E2E-X8MC1L8-M1
NC
E2E-X8MB2L8-M1
E2E-X8MC2L8-M1
NO
E2E-X8MB1D8-M3
E2E-X8MC18-M3
NC
E2E-X8MB28-M3
E2E-X8MC28-M3
NO
E2E-X8MB1DL8-M3
E2E-X8MC1L8-M3
NC
E2E-X8MB2L8-M3
E2E-X8MC2L8-M3
NO
E2E-X8MB1D8-M5
E2E-X8MC18-M5
NC
E2E-X8MB28-M5
E2E-X8MC28-M5
NO
E2E-X8MB1DL8-M5
E2E-X8MC1L8-M5
NC
E2E-X8MB2L8-M5
E2E-X8MC2L8-M5
NO
E2E-X16MB1D12 2M
E2E-X16MC112 2M
NC
E2E-X16MB212 2M
E2E-X16MC212 2M
NO
E2E-X16MB1DL12 2M
E2E-X16MC1L12 2M
NC
E2E-X16MB2L12 2M
E2E-X16MC2L12 2M
NO
E2E-X16MB1D12-M1TJ 0.3M
E2E-X16MC112-M1TJ 0.3M
NC
E2E-X16MB212-M1TJ 0.3M
E2E-X16MC212-M1TJ 0.3M
NO
E2E-X16MB1DL12-M1TJ 0.3M
E2E-X16MC1L12-M1TJ 0.3M
NC
E2E-X16MB2L12-M1TJ 0.3M
E2E-X16MC2L12-M1TJ 0.3M
NO
E2E-X16MB1D12-M1
E2E-X16MC112-M1
NC
E2E-X16MB212-M1
E2E-X16MC212-M1
NO
E2E-X16MB1DL12-M1
E2E-X16MC1L12-M1
NC
E2E-X16MB2L12-M1
E2E-X16MC2L12-M1
NO
E2E-X30MB1DL18 2M
E2E-X30MC1L18 2M
NC
E2E-X30MB2L18 2M
E2E-X30MC2L18 2M
NO
E2E-X30MB1DL18-M1TJ 0.3M
E2E-X30MC1L18-M1TJ 0.3M
NC
E2E-X30MB2L18-M1TJ 0.3M
E2E-X30MC2L18-M1TJ 0.3M
NO
E2E-X30MB1DL18-M1
E2E-X30MC1L18-M1
NC
E2E-X30MB2L18-M1
E2E-X30MC2L18-M1
NO
E2E-X50MB1DL30 2M
E2E-X50MC1L30 2M
NC
E2E-X50MB2L30 2M
E2E-X50MC2L30 2M
NO
E2E-X50MB1DL30-M1TJ 0.3M
E2E-X50MC1L30-M1TJ 0.3M
NC
E2E-X50MB2L30-M1TJ 0.3M
E2E-X50MC2L30-M1TJ 0.3M
NO
E2E-X50MB1DL30-M1
E2E-X50MC1L30-M1
NC
E2E-X50MB2L30-M1
E2E-X50MC2L30-M1
*1. Models with 5-m cable length are also available (Example: E2E-X16MB1D12 5M)
*2. Models with 2-m and 5-m robot (bending-resistant) cables are also available with "-R" in the model number. (Example: E2E-X16MB1D12-R
2M/E2E-X16MB1D12-R 5M)
*3. Models with M12 Smartclick connector model robot (bending-resistant) cables are also available with R" in the model number. (Example: E2EX16MB1D12-M1TJR 0.3M)
Note: 1. Models in
are equipped with IO-Link (COM2). For IO-Link (COM3), select a model number with the format of "E2E-X□□□T□"
(Example: E2E-X16MB1T12 2M).
Operation mode NO can be changed to NC via IO-Link communications.
2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
5
E2E/E2EQ NEXT Series
PREMIUM Model
E2E NEXT Series (Triple distance model)
DC 3-wire [Refer to Dimensions on page 50.]
Shielded *1
Size (Sensing
distance)
Connection method
Body size
38 mm *3
Pre-wired (2 m) *2
48 mm
M12 Pre-wired
Smartclick Connector (0.3 m)
M8
(3 mm)
38 mm *4
48 mm
43 mm
M12 Connector
53 mm
39 mm
M8 Connector (4-pin)
49 mm
39 mm
M8 Connector (3-pin)
49 mm
47 mm *3
Operation
mode
69 mm
E2E-X3B1D8 2M
E2E-X3C18 2M
NC
E2E-X3B28 2M
E2E-X3C28 2M
NO
E2E-X3B1DL8 2M
E2E-X3C1L8 2M
NC
E2E-X3B2L8 2M
E2E-X3C2L8 2M
NO
E2E-X3B1D8-M1TJ 0.3M
E2E-X3C18-M1TJ 0.3M
NC
E2E-X3B28-M1TJ 0.3M
E2E-X3C28-M1TJ 0.3M
NO
E2E-X3B1DL8-M1TJ 0.3M
E2E-X3C1L8-M1TJ 0.3M
NC
E2E-X3B2L8-M1TJ 0.3M
E2E-X3C2L8-M1TJ 0.3M
NO
E2E-X3B1D8-M1
E2E-X3C18-M1
NC
E2E-X3B28-M1
E2E-X3C28-M1
NO
E2E-X3B1DL8-M1
E2E-X3C1L8-M1
NC
E2E-X3B2L8-M1
E2E-X3C2L8-M1
NO
E2E-X3B1D8-M3
E2E-X3C18-M3
NC
E2E-X3B28-M3
E2E-X3C28-M3
NO
E2E-X3B1DL8-M3
E2E-X3C1L8-M3
NC
E2E-X3B2L8-M3
E2E-X3C2L8-M3
NO
E2E-X3B1D8-M5
E2E-X3C18-M5
NC
E2E-X3B28-M5
E2E-X3C28-M5
NO
E2E-X3B1DL8-M5
E2E-X3C1L8-M5
NC
E2E-X3B2L8-M5
E2E-X3C2L8-M5
NO
E2E-X6B1D12 2M
E2E-X6C112 2M
NC
E2E-X6B212 2M
E2E-X6C212 2M
E2E-X6B3D12 2M
E2E-X6C312 2M
NO
E2E-X6B1DL12 2M
E2E-X6C1L12 2M
NC
E2E-X6B2L12 2M
E2E-X6C2L12 2M
E2E-X6B3DL12 2M
E2E-X6C3L12 2M
NO
E2E-X6B1D12-M1TJ 0.3M
E2E-X6C112-M1TJ 0.3M
NC
E2E-X6B212-M1TJ 0.3M
E2E-X6C212-M1TJ 0.3M
NO+NC
E2E-X6B3D12-M1TJ 0.3M
E2E-X6C312-M1TJ 0.3M
NO
E2E-X6B1DL12-M1TJ 0.3M
E2E-X6C1L12-M1TJ 0.3M
NC
E2E-X6B2L12-M1TJ 0.3M
E2E-X6C2L12-M1TJ 0.3M
E2E-X6B3DL12-M1TJ 0.3M
E2E-X6C3L12-M1TJ 0.3M
NO
E2E-X6B1D12-M1
E2E-X6C112-M1
NC
E2E-X6B212-M1
E2E-X6C212-M1
E2E-X6B3D12-M1
E2E-X6C312-M1
NO
E2E-X6B1DL12-M1
E2E-X6C1L12-M1
NC
E2E-X6B2L12-M1
E2E-X6C2L12-M1
E2E-X6B3DL12-M1
E2E-X6C3L12-M1
NO+NC
47 mm *4
M12
(6 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
69 mm
NO+NC
48 mm
NO+NC
M12 Connector
70 mm
NO+NC
6
NPN
NO
NO+NC
Pre-wired (2 m) *2
Model
PNP
E2E/E2EQ NEXT Series
PREMIUM Model
Size (Sensing
distance)
Connection method
Body size
55 mm *3
Operation
mode
77 mm
E2E-X12B1D18 2M
E2E-X12C118 2M
NC
E2E-X12B218 2M
E2E-X12C218 2M
E2E-X12B3D18 2M
E2E-X12C318 2M
NO
E2E-X12B1DL18 2M
E2E-X12C1L18 2M
NC
E2E-X12B2L18 2M
E2E-X12C2L18 2M
E2E-X12B3DL18 2M
E2E-X12C3L18 2M
NO
E2E-X12B1D18-M1TJ 0.3M
E2E-X12C118-M1TJ 0.3M
NC
E2E-X12B218-M1TJ 0.3M
E2E-X12C218-M1TJ 0.3M
NO+NC
E2E-X12B3D18-M1TJ 0.3M
E2E-X12C318-M1TJ 0.3M
NO
E2E-X12B1DL18-M1TJ 0.3M
E2E-X12C1L18-M1TJ 0.3M
NC
E2E-X12B2L18-M1TJ 0.3M
E2E-X12C2L18-M1TJ 0.3M
E2E-X12B3DL18-M1TJ 0.3M
E2E-X12C3L18-M1TJ 0.3M
NO
E2E-X12B1D18-M1
E2E-X12C118-M1
NC
E2E-X12B218-M1
E2E-X12C218-M1
E2E-X12B3D18-M1
E2E-X12C318-M1
NO
E2E-X12B1DL18-M1
E2E-X12C1L18-M1
NC
E2E-X12B2L18-M1
E2E-X12C2L18-M1
E2E-X12B3DL18-M1
E2E-X12C3L18-M1
NO
E2E-X22B1D30 2M
E2E-X22C130 2M
NC
E2E-X22B230 2M
E2E-X22C230 2M
E2E-X22B3D30 2M
E2E-X22C330 2M
NO
E2E-X22B1DL30 2M
E2E-X22C1L30 2M
NC
E2E-X22B2L30 2M
E2E-X22C2L30 2M
E2E-X22B3DL30 2M
E2E-X22C3L30 2M
NO
E2E-X22B1D30-M1TJ 0.3M
E2E-X22C130-M1TJ 0.3M
NC
E2E-X22B230-M1TJ 0.3M
E2E-X22C230-M1TJ 0.3M
NO+NC
E2E-X22B3D30-M1TJ 0.3M
E2E-X22C330-M1TJ 0.3M
NO
E2E-X22B1DL30-M1TJ 0.3M
E2E-X22C1L30-M1TJ 0.3M
NC
E2E-X22B2L30-M1TJ 0.3M
E2E-X22C2L30-M1TJ 0.3M
E2E-X22B3DL30-M1TJ 0.3M
E2E-X22C3L30-M1TJ 0.3M
NO
E2E-X22B1D30-M1
E2E-X22C130-M1
NC
E2E-X22B230-M1
E2E-X22C230-M1
E2E-X22B3D30-M1
E2E-X22C330-M1
NO
E2E-X22B1DL30-M1
E2E-X22C1L30-M1
NC
E2E-X22B2L30-M1
E2E-X22C2L30-M1
E2E-X22B3DL30-M1
E2E-X22C3L30-M1
NO+NC
55 mm *4
M18
(12 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
77 mm
NO+NC
53 mm
NO+NC
M12 Connector
75 mm
NO+NC
60 mm *3
NO+NC
Pre-wired (2 m) *2
82 mm
NO+NC
60 mm *4
M30
(22 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
82 mm
NO+NC
58 mm
NO+NC
M12 Connector
80 mm
NPN
NO
NO+NC
Pre-wired (2 m) *2
Model
PNP
NO+NC
*1. When embedding the Proximity Sensor in metal, refer to Influence of Surrounding Metal on page 48.
*2. Models with 5-m cable length are also available (Example: E2E-X6B1D12 5M)
*3. Models with 2-m and 5-m robot (bending-resistant) cables are also available with "-R" in the model number. (Example: E2E-X6B1D12-R 2M/
E2E-X6B1D12-R 5M)
*4. Models with M12 Smartclick connector model robot (bending-resistant) cables are also available with R" in the model number. (Example: E2EX6B1D12-M1TJR 0.3M)
Note: 1. Models in
are equipped with IO-Link (COM2). For IO-Link (COM3), select a model number with the format of "E2E-X□□□T□"
(Example: E2E-X6B1T12 2M).
Operation mode NO can be changed to NC via IO-Link communications.
2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
7
E2E/E2EQ NEXT Series
PREMIUM Model
E2E NEXT Series (Triple distance model)
DC 3-wire [Refer to Dimensions on page 50.]
Unshielded
Size (Sensing
distance)
Connection method
Body size
38 mm *2
Pre-wired (2 m) *1
48 mm
M12 Pre-wired
Smartclick Connector (0.3 m)
M8
(6 mm)
38 mm *3
48 mm
43 mm
M12 Connector
53 mm
39 mm
M8 Connector (4-pin)
49 mm
39 mm
M8 Connector (3-pin)
49 mm
47 mm *2
Pre-wired (2 m) *1
69 mm
Operation
mode
M12
(10 mm)
E2E-X6MB1D8 2M
E2E-X6MC18 2M
NC
E2E-X6MB28 2M
E2E-X6MC28 2M
NO
E2E-X6MB1DL8 2M
E2E-X6MC1L8 2M
NC
E2E-X6MB2L8 2M
E2E-X6MC2L8 2M
NO
E2E-X6MB1D8-M1TJ 0.3M
E2E-X6MC18-M1TJ 0.3M
NC
E2E-X6MB28-M1TJ 0.3M
E2E-X6MC28-M1TJ 0.3M
NO
E2E-X6MB1DL8-M1TJ 0.3M
E2E-X6MC1L8-M1TJ 0.3M
NC
E2E-X6MB2L8-M1TJ 0.3M
E2E-X6MC2L8-M1TJ 0.3M
NO
E2E-X6MB1D8-M1
E2E-X6MC18-M1
NC
E2E-X6MB28-M1
E2E-X6MC28-M1
NO
E2E-X6MB1DL8-M1
E2E-X6MC1L8-M1
NC
E2E-X6MB2L8-M1
E2E-X6MC2L8-M1
NO
E2E-X6MB1D8-M3
E2E-X6MC18-M3
NC
E2E-X6MB28-M3
E2E-X6MC28-M3
NO
E2E-X6MB1DL8-M3
E2E-X6MC1L8-M3
NC
E2E-X6MB2L8-M3
E2E-X6MC2L8-M3
NO
E2E-X6MB1D8-M5
E2E-X6MC18-M5
NC
E2E-X6MB28-M5
E2E-X6MC28-M5
NO
E2E-X6MB1DL8-M5
E2E-X6MC1L8-M5
NC
E2E-X6MB2L8-M5
E2E-X6MC2L8-M5
NO
E2E-X10MB1D12 2M
E2E-X10MC112 2M
NC
E2E-X10MB212 2M
E2E-X10MC212 2M
NO+NC
E2E-X10MB3D12 2M
E2E-X10MC312 2M
NO
E2E-X10MB1DL12 2M
E2E-X10MC1L12 2M
NC
E2E-X10MB2L12 2M
E2E-X10MC2L12 2M
E2E-X10MB3DL12 2M
E2E-X10MC3L12 2M
NO
E2E-X10MB1D12-M1TJ 0.3M
E2E-X10MC112-M1TJ 0.3M
NC
E2E-X10MB212-M1TJ 0.3M
E2E-X10MC212-M1TJ 0.3M
E2E-X10MB3D12-M1TJ 0.3M
E2E-X10MC312-M1TJ 0.3M
NO
E2E-X10MB1DL12-M1TJ 0.3M
E2E-X10MC1L12-M1TJ 0.3M
NC
E2E-X10MB2L12-M1TJ 0.3M
E2E-X10MC2L12-M1TJ 0.3M
E2E-X10MB3DL12-M1TJ 0.3M
E2E-X10MC3L12-M1TJ 0.3M
NO
E2E-X10MB1D12-M1
E2E-X10MC112-M1
NC
E2E-X10MB212-M1
E2E-X10MC212-M1
E2E-X10MB3D12-M1
E2E-X10MC312-M1
NO
E2E-X10MB1DL12-M1
E2E-X10MC1L12-M1
NC
E2E-X10MB2L12-M1
E2E-X10MC2L12-M1
NO+NC
E2E-X10MB3DL12-M1
E2E-X10MC3L12-M1
NO
E2E-X20MB1DL18 2M
E2E-X20MC1L18 2M
NC
E2E-X20MB2L18 2M
E2E-X20MC2L18 2M
E2E-X20MB3DL18 2M
E2E-X20MC3L18 2M
NO
E2E-X20MB1DL18-M1TJ 0.3M
E2E-X20MC1L18-M1TJ 0.3M
NC
E2E-X20MB2L18-M1TJ 0.3M
E2E-X20MC2L18-M1TJ 0.3M
E2E-X20MB3DL18-M1TJ 0.3M
E2E-X20MC3L18-M1TJ 0.3M
NO
E2E-X20MB1DL18-M1
E2E-X20MC1L18-M1
NC
E2E-X20MB2L18-M1
E2E-X20MC2L18-M1
E2E-X20MB3DL18-M1
E2E-X20MC3L18-M1
NO+NC
M12 Pre-wired
Smartclick Connector (0.3 m)
69 mm
NO+NC
48 mm
NO+NC
M12 Connector
70 mm
Pre-wired (2 m) *1
77 mm *2
NO+NC
M18
(20 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
M12 Connector
77 mm *3
NO+NC
75 mm
NO+NC
8
NPN
NO
NO+NC
47 mm *3
Model
PNP
E2E/E2EQ NEXT Series
PREMIUM Model
Size (Sensing
distance)
Connection method
Pre-wired (2 m) *1
Body size
82 mm *2
Operation
mode
M12 Pre-wired
Smartclick Connector (0.3 m)
M12 Connector
82 mm *3
E2E-X40MB1DL30 2M
E2E-X40MC1L30 2M
NC
E2E-X40MB2L30 2M
E2E-X40MC2L30 2M
E2E-X40MB3DL30 2M
E2E-X40MC3L30 2M
NO
E2E-X40MB1DL30-M1TJ 0.3M
E2E-X40MC1L30-M1TJ 0.3M
NC
E2E-X40MB2L30-M1TJ 0.3M
E2E-X40MC2L30-M1TJ 0.3M
E2E-X40MB3DL30-M1TJ 0.3M
E2E-X40MC3L30-M1TJ 0.3M
NO
E2E-X40MB1DL30-M1
E2E-X40MC1L30-M1
NC
E2E-X40MB2L30-M1
E2E-X40MC2L30-M1
E2E-X40MB3DL30-M1
E2E-X40MC3L30-M1
NO+NC
80 mm
NPN
NO
NO+NC
M30
(40 mm)
Model
PNP
NO+NC
*1. Models with 5-m cable length are also available (Example: E2E-X10MB1D12 5M)
*2. Models with 2-m and 5-m robot (bending-resistant) cables are also available with "-R" in the model number. (Example: E2E-X10MB1D12-R
2M/E2E-X10MB1D12-R 5M)
*3. Models with M12 Smartclick connector model robot (bending-resistant) cables are also available with R" in the model number. (Example: E2EX10MB1D12-M1TJR 0.3M)
Note: 1. Models in
are equipped with IO-Link (COM2). For IO-Link (COM3), select a model number with the format of "E2E-X□□□T□"
(Example: E2E-X10MB1T12 2M).
Operation mode NO can be changed to NC via IO-Link communications.
2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
9
E2E/E2EQ NEXT Series
PREMIUM Model
E2EQ NEXT Series (Spatter-resistant Triple distance model)
DC 3-wire [Refer to Dimensions on page 50.]
Shielded *1
Size (Sensing
distance)
M8
(3 mm)
Connection method
Body size
Pre-wired (2 m) *2
38 mm
M12 Pre-wired
Smartclick Connector (0.3 m)
38 mm
M12 Connector
43 mm
Pre-wired (2 m) *2
47 mm
Operation
mode
M12 Pre-wired
Smartclick Connector (0.3 m)
M12 Connector
Pre-wired (2 m) *2
47 mm
E2EQ-X3B1D8 2M
E2EQ-X3C18 2M
NC
E2EQ-X3B28 2M
E2EQ-X3C28 2M
NO
E2EQ-X3B1D8-M1TJ 0.3M
E2EQ-X3C18-M1TJ 0.3M
NC
E2EQ-X3B28-M1TJ 0.3M
E2EQ-X3C28-M1TJ 0.3M
NO
E2EQ-X3B1D8-M1
E2EQ-X3C18-M1
NC
E2EQ-X3B28-M1
E2EQ-X3C28-M1
NO
E2EQ-X6B1D12 2M
E2EQ-X6C112 2M
NC
E2EQ-X6B212 2M
E2EQ-X6C212 2M
E2EQ-X6B3D12 2M
E2EQ-X6C312 2M
NO
E2EQ-X6B1D12-M1TJ 0.3M
E2EQ-X6C112-M1TJ 0.3M
NC
E2EQ-X6B212-M1TJ 0.3M
E2EQ-X6C212-M1TJ 0.3M
E2EQ-X6B3D12-M1TJ 0.3M
E2EQ-X6C312-M1TJ 0.3M
NO+NC
48 mm
55 mm
NO
E2EQ-X6B1D12-M1
E2EQ-X6C112-M1
NC
E2EQ-X6B212-M1
E2EQ-X6C212-M1
NO+NC
E2EQ-X6B3D12-M1
E2EQ-X6C312-M1
NO
E2EQ-X12B1D18 2M
E2EQ-X12C118 2M
NC
E2EQ-X12B218 2M
E2EQ-X12C218 2M
E2EQ-X12B3D18 2M
E2EQ-X12C318 2M
NO+NC
M18
(12 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
M12 Connector
Pre-wired (2 m) *2
55 mm
NO
E2EQ-X12B1D18-M1TJ 0.3M
E2EQ-X12C118-M1TJ 0.3M
NC
E2EQ-X12B218-M1TJ 0.3M
E2EQ-X12C218-M1TJ 0.3M
E2EQ-X12B3D18-M1TJ 0.3M
E2EQ-X12C318-M1TJ 0.3M
NO+NC
53 mm
60 mm
NO
E2EQ-X12B1D18-M1
E2EQ-X12C118-M1
NC
E2EQ-X12B218-M1
E2EQ-X12C218-M1
NO+NC
E2EQ-X12B3D18-M1
E2EQ-X12C318-M1
NO
E2EQ-X22B1D30 2M
E2EQ-X22C130 2M
NC
E2EQ-X22B230 2M
E2EQ-X22C230 2M
E2EQ-X22B3D30 2M
E2EQ-X22C330 2M
NO+NC
M30
(22 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
M12 Connector
60 mm
NO
E2EQ-X22B1D30-M1TJ 0.3M
E2EQ-X22C130-M1TJ 0.3M
NC
E2EQ-X22B230-M1TJ 0.3M
E2EQ-X22C230-M1TJ 0.3M
E2EQ-X22B3D30-M1TJ 0.3M
E2EQ-X22C330-M1TJ 0.3M
NO+NC
58 mm
NPN
NO
NO+NC
M12
(6 mm)
Model
PNP
NO
E2EQ-X22B1D30-M1
E2EQ-X22C130-M1
NC
E2EQ-X22B230-M1
E2EQ-X22C230-M1
E2EQ-X22B3D30-M1
E2EQ-X22C330-M1
NO+NC
*1. When embedding the Proximity Sensor in metal, refer to Influence of Surrounding Metal on page 48.
*2. Models with 5-m cable length are also available (Example: E2EQ-X6B1D12 5M)
Note: 1. Models in
are equipped with IO-Link (COM2). For IO-Link (COM3), select a model number with the format of "E2E-X□□□T□"
(Example: E2EQ-X6B1T12 2M).
Operation mode NO can be changed to NC via IO-Link communications.
2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
10
E2E/E2EQ NEXT Series
BASIC Model
E2E NEXT Series (Double distance model)
DC 3-wire [Refer to Dimensions on page 51.]
Shielded
Size (Sensing
distance)
Connection method
Body size
38 mm *2
Pre-wired (2 m) *1
48 mm
M12 Pre-wired
Smartclick Connector (0.3 m)
38 mm *3
48 mm
43 mm
M8
(2 mm)
M12 Connector
53 mm
Operation
mode
M8 Connector (4-pin)
49 mm
39 mm
M8 Connector (3-pin)
49 mm
47 mm *2
E2E-X2B1D8 2M
E2E-X2C18 2M
NC
E2E-X2B28 2M
E2E-X2C28 2M
NO
E2E-X2B1DL8 2M
E2E-X2C1L8 2M
NC
E2E-X2B2L8 2M
E2E-X2C2L8 2M
NO
E2E-X2B1D8-M1TJ 0.3M
E2E-X2C18-M1TJ 0.3M
NC
E2E-X2B28-M1TJ 0.3M
E2E-X2C28-M1TJ 0.3M
NO
E2E-X2B1DL8-M1TJ 0.3M
E2E-X2C1L8-M1TJ 0.3M
NC
E2E-X2B2L8-M1TJ 0.3M
E2E-X2C2L8-M1TJ 0.3M
NO
E2E-X2B1D8-M1
E2E-X2C18-M1
NC
E2E-X2B28-M1
E2E-X2C28-M1
NO
E2E-X2B1DL8-M1
E2E-X2C1L8-M1
NC
E2E-X2B2L8-M1
E2E-X2C2L8-M1
E2E-X2B3DL8-M1
E2E-X2C3L8-M1
NO
E2E-X2B1D8-M3
E2E-X2C18-M3
NC
E2E-X2B28-M3
E2E-X2C28-M3
NO
E2E-X2B1DL8-M3
E2E-X2C1L8-M3
NC
E2E-X2B2L8-M3
E2E-X2C2L8-M3
NO
E2E-X2B1D8-M5
E2E-X2C18-M5
NC
E2E-X2B28-M5
E2E-X2C28-M5
NO
E2E-X2B1DL8-M5
E2E-X2C1L8-M5
NC
E2E-X2B2L8-M5
E2E-X2C2L8-M5
NO
E2E-X4B1D12 2M
E2E-X4C112 2M
NC
E2E-X4B212 2M
E2E-X4C212 2M
E2E-X4B3D12 2M
E2E-X4C312 2M
NO
E2E-X4B1DL12 2M
E2E-X4C1L12 2M
NC
E2E-X4B2L12 2M
E2E-X4C2L12 2M
E2E-X4B3DL12 2M
E2E-X4C3L12 2M
NO
E2E-X4B1D12-M1TJ 0.3M
E2E-X4C112-M1TJ 0.3M
NC
E2E-X4B212-M1TJ 0.3M
E2E-X4C212-M1TJ 0.3M
E2E-X4B3D12-M1TJ 0.3M
E2E-X4C312-M1TJ 0.3M
NO
E2E-X4B1DL12-M1TJ 0.3M
E2E-X4C1L12-M1TJ 0.3M
NC
E2E-X4B2L12-M1TJ 0.3M
E2E-X4C2L12-M1TJ 0.3M
E2E-X4B3DL12-M1TJ 0.3M
E2E-X4C3L12-M1TJ 0.3M
NO
E2E-X4B1D12-M1
E2E-X4C112-M1
NC
E2E-X4B212-M1
E2E-X4C212-M1
NO+NC
E2E-X4B3D12-M1
E2E-X4C312-M1
NO
E2E-X4B1DL12-M1
E2E-X4C1L12-M1
NC
E2E-X4B2L12-M1
E2E-X4C2L12-M1
E2E-X4B3DL12-M1
E2E-X4C3L12-M1
NO+NC
Pre-wired (2 m) *1
69 mm
NO+NC
47 mm *3
M12
(4 mm)
NO+NC
M12 Pre-wired
Smartclick Connector (0.3 m)
69 mm
NO+NC
48 mm
M12 Connector
70 mm
NPN
NO
NO+NC
39 mm
Model
PNP
NO+NC
11
E2E/E2EQ NEXT Series
BASIC Model
Size (Sensing
distance)
Connection method
Body size
55 mm *2
Operation
mode
77 mm
E2E-X8B1D18 2M
E2E-X8C118 2M
NC
E2E-X8B218 2M
E2E-X8C218 2M
E2E-X8B3D18 2M
E2E-X8C318 2M
NO
E2E-X8B1DL18 2M
E2E-X8C1L18 2M
NC
E2E-X8B2L18 2M
E2E-X8C2L18 2M
E2E-X8B3DL18 2M
E2E-X8C3L18 2M
NO
E2E-X8B1D18-M1TJ 0.3M
E2E-X8C118-M1TJ 0.3M
NC
E2E-X8B218-M1TJ 0.3M
E2E-X8C218-M1TJ 0.3M
NO+NC
E2E-X8B3D18-M1TJ 0.3M
E2E-X8C318-M1TJ 0.3M
NO
E2E-X8B1DL18-M1TJ 0.3M
E2E-X8C1L18-M1TJ 0.3M
NC
E2E-X8B2L18-M1TJ 0.3M
E2E-X8C2L18-M1TJ 0.3M
E2E-X8B3DL18-M1TJ 0.3M
E2E-X8C3L18-M1TJ 0.3M
NO
E2E-X8B1D18-M1
E2E-X8C118-M1
NC
E2E-X8B218-M1
E2E-X8C218-M1
E2E-X8B3D18-M1
E2E-X8C318-M1
NO
E2E-X8B1DL18-M1
E2E-X8C1L18-M1
NC
E2E-X8B2L18-M1
E2E-X8C2L18-M1
NO+NC
E2E-X8B3DL18-M1
E2E-X8C3L18-M1
NO
E2E-X15B1D30 2M
E2E-X15C130 2M
NC
E2E-X15B230 2M
E2E-X15C230 2M
E2E-X15B3D30 2M
E2E-X15C330 2M
NO
E2E-X15B1DL30 2M
E2E-X15C1L30 2M
NC
E2E-X15B2L30 2M
E2E-X15C2L30 2M
E2E-X15B3DL30 2M
E2E-X15C3L30 2M
NO
E2E-X15B1D30-M1TJ 0.3M
E2E-X15C130-M1TJ 0.3M
NC
E2E-X15B230-M1TJ 0.3M
E2E-X15C230-M1TJ 0.3M
E2E-X15B3D30-M1TJ 0.3M
E2E-X15C330-M1TJ 0.3M
NO
E2E-X15B1DL30-M1TJ 0.3M
E2E-X15C1L30-M1TJ 0.3M
NC
E2E-X15B2L30-M1TJ 0.3M
E2E-X15C2L30-M1TJ 0.3M
E2E-X15B3DL30-M1TJ 0.3M
E2E-X15C3L30-M1TJ 0.3M
NO
E2E-X15B1D30-M1
E2E-X15C130-M1
NC
E2E-X15B230-M1
E2E-X15C230-M1
E2E-X15B3D30-M1
E2E-X15C330-M1
NO
E2E-X15B1DL30-M1
E2E-X15C1L30-M1
NC
E2E-X15B2L30-M1
E2E-X15C2L30-M1
E2E-X15B3DL30-M1
E2E-X15C3L30-M1
NO+NC
55 mm *3
M18
(8 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
77 mm
NO+NC
53 mm
NO+NC
M12 Connector
75 mm
60 mm *2
NO+NC
Pre-wired (2 m) *1
82 mm
NO+NC
60 mm *3
M30
(15 mm)
NO+NC
M12 Pre-wired
Smartclick Connector (0.3 m)
82 mm
NO+NC
58 mm
NO+NC
M12 Connector
80 mm
NPN
NO
NO+NC
Pre-wired (2 m) *1
Model
PNP
NO+NC
*1. Models with 5-m cable length are also available (Example: E2E-X2B1D8 5M)
*2. Models with 2-m and 5-m robot (bending-resistant) cables are also available with "-R" in the model number. (Example: E2E-X2B1D8-R 2M/
E2E-X2B1D8-R 5M)
*3. Models with M12 Smartclick connector model robot (bending-resistant) cables are also available with R" in the model number. (Example: E2EX4B1T12-M1TJR 0.3M)
Note: 1. Models in
are equipped with IO-Link (COM2). For IO-Link (COM3), select a model number with the format of "E2E-X□□□T□"
(Example: E2E-X2B1T8 2M).
Operation mode NO can be changed to NC via IO-Link communications.
2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
12
E2E/E2EQ NEXT Series
BASIC Model
E2E NEXT Series (Double distance model)
DC 3-wire [Refer to Dimensions on page 51.]
Unshielded
Size (Sensing
distance)
Connection method
Body size
38 mm *2
Pre-wired (2 m) *1
48 mm
M12 Pre-wired
Smartclick Connector (0.3 m)
38 mm *3
48 mm
43 mm
M8
(4 mm)
M12 Connector
53 mm
Operation
mode
M8 Connector (4-pin)
49 mm
39 mm
M8 Connector (3-pin)
49 mm
47 mm *2
E2E-X4MB1D8 2M
E2E-X4MC18 2M
NC
E2E-X4MB28 2M
E2E-X4MC28 2M
NO
E2E-X4MB1DL8 2M
E2E-X4MC1L8 2M
NC
E2E-X4MB2L8 2M
E2E-X4MC2L8 2M
NO
E2E-X4MB1D8-M1TJ 0.3M
E2E-X4MC18-M1TJ 0.3M
NC
E2E-X4MB28-M1TJ 0.3M
E2E-X4MC28-M1TJ 0.3M
NO
E2E-X4MB1DL8-M1TJ 0.3M
E2E-X4MC1L8-M1TJ 0.3M
NC
E2E-X4MB2L8-M1TJ 0.3M
E2E-X4MC2L8-M1TJ 0.3M
NO
E2E-X4MB1D8-M1
E2E-X4MC18-M1
NC
E2E-X4MB28-M1
E2E-X4MC28-M1
NO
E2E-X4MB1DL8-M1
E2E-X4MC1L8-M1
NC
E2E-X4MB2L8-M1
E2E-X4MC2L8-M1
E2E-X4MB3DL8-M1
E2E-X4MC3L8-M1
NO
E2E-X4MB1D8-M3
E2E-X4MC18-M3
NC
E2E-X4MB28-M3
E2E-X4MC28-M3
NO
E2E-X4MB1DL8-M3
E2E-X4MC1L8-M3
NC
E2E-X4MB2L8-M3
E2E-X4MC2L8-M3
NO
E2E-X4MB1D8-M5
E2E-X4MC18-M5
NC
E2E-X4MB28-M5
E2E-X4MC28-M5
NO
E2E-X4MB1DL8-M5
E2E-X4MC1L8-M5
NC
E2E-X4MB2L8-M5
E2E-X4MC2L8-M5
NO
E2E-X8MB1D12 2M
E2E-X8MC112 2M
NC
E2E-X8MB212 2M
E2E-X8MC212 2M
E2E-X8MB3D12 2M
E2E-X8MC312 2M
NO
E2E-X8MB1DL12 2M
E2E-X8MC1L12 2M
NC
E2E-X8MB2L12 2M
E2E-X8MC2L12 2M
E2E-X8MB3DL12 2M
E2E-X8MC3L12 2M
NO
E2E-X8MB1D12-M1TJ 0.3M
E2E-X8MC112-M1TJ 0.3M
NC
E2E-X8MB212-M1TJ 0.3M
E2E-X8MC212-M1TJ 0.3M
NO+NC
E2E-X8MB3D12-M1TJ 0.3M
E2E-X8MC312-M1TJ 0.3M
NO
E2E-X8MB1DL12-M1TJ 0.3M
E2E-X8MC1L12-M1TJ 0.3M
NC
E2E-X8MB2L12-M1TJ 0.3M
E2E-X8MC2L12-M1TJ 0.3M
E2E-X8MB3DL12-M1TJ 0.3M
E2E-X8MC3L12-M1TJ 0.3M
NO
E2E-X8MB1D12-M1
E2E-X8MC112-M1
NC
E2E-X8MB212-M1
E2E-X8MC212-M1
E2E-X8MB3D12-M1
E2E-X8MC312-M1
NO
E2E-X8MB1DL12-M1
E2E-X8MC1L12-M1
NC
E2E-X8MB2L12-M1
E2E-X8MC2L12-M1
E2E-X8MB3DL12-M1
E2E-X8MC3L12-M1
NO+NC
Pre-wired (2 m) *1
69 mm
NO+NC
47 mm *3
M12
(8 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
69 mm
NO+NC
48 mm
NO+NC
M12 Connector
70 mm
NPN
NO
NO+NC
39 mm
Model
PNP
NO+NC
13
E2E/E2EQ NEXT Series
BASIC Model
Size (Sensing
distance)
Connection method
Body size
55 mm *2
Pre-wired (2 m) *1
77 mm
Operation
mode
M18
(16 mm)
E2E-X16MB1D18 2M
E2E-X16MC118 2M
NC
E2E-X16MB218 2M
E2E-X16MC218 2M
NO+NC
E2E-X16MB3D18 2M
E2E-X16MC318 2M
NO
E2E-X16MB1DL18 2M
E2E-X16MC1L18 2M
NC
E2E-X16MB2L18 2M
E2E-X16MC2L18 2M
E2E-X16MB3DL18 2M
E2E-X16MC3L18 2M
NO
E2E-X16MB1D18-M1TJ 0.3M
E2E-X16MC118-M1TJ 0.3M
NC
E2E-X16MB218-M1TJ 0.3M
E2E-X16MC218-M1TJ 0.3M
E2E-X16MB3D18-M1TJ 0.3M
E2E-X16MC318-M1TJ 0.3M
NO
E2E-X16MB1DL18-M1TJ 0.3M
E2E-X16MC1L18-M1TJ 0.3M
NC
E2E-X16MB2L18-M1TJ 0.3M
E2E-X16MC2L18-M1TJ 0.3M
E2E-X16MB3DL18-M1TJ 0.3M
E2E-X16MC3L18-M1TJ 0.3M
NO
E2E-X16MB1D18-M1
E2E-X16MC118-M1
NC
E2E-X16MB218-M1
E2E-X16MC218-M1
E2E-X16MB3D18-M1
E2E-X16MC318-M1
NO
E2E-X16MB1DL18-M1
E2E-X16MC1L18-M1
NC
E2E-X16MB2L18-M1
E2E-X16MC2L18-M1
NO+NC
E2E-X16MB3DL18-M1
E2E-X16MC3L18-M1
NO
E2E-X30MB1DL30 2M
E2E-X30MC1L30 2M
NC
E2E-X30MB2L30 2M
E2E-X30MC2L30 2M
E2E-X30MB3DL30 2M
E2E-X30MC3L30 2M
NO
E2E-X30MB1DL30-M1TJ 0.3M
E2E-X30MC1L30-M1TJ 0.3M
NC
E2E-X30MB2L30-M1TJ 0.3M
E2E-X30MC2L30-M1TJ 0.3M
E2E-X30MB3DL30-M1TJ 0.3M
E2E-X30MC3L30-M1TJ 0.3M
NO
E2E-X30MB1DL30-M1
E2E-X30MC1L30-M1
NC
E2E-X30MB2L30-M1
E2E-X30MC2L30-M1
E2E-X30MB3DL30-M1
E2E-X30MC3L30-M1
NO+NC
M12 Pre-wired
Smartclick Connector (0.3 m)
77 mm
NO+NC
53 mm
NO+NC
M12 Connector
75 mm
Pre-wired (2 m) *1
82 mm *2
NO+NC
M30
(30 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
M12 Connector
82 mm *3
NO+NC
80 mm
NPN
NO
NO+NC
55 mm *3
Model
PNP
NO+NC
*1. Models with 5-m cable length are also available (Example: E2E-X8MB1D12 5M)
*2. Models with 2-m and 5-m robot (bending-resistant) cables are also available with "-R" in the model number. (Example: E2E-X8MB1D12-R 2M/
E2E-X8MB1D12-R 5M)
*3. Models with M12 Smartclick connector model robot (bending-resistant) cables are also available with R" in the model number. (Example: E2EX8MB1D12-M1TJR 0.3M)
Note: 1. Models in
are equipped with IO-Link (COM2). For IO-Link (COM3), select a model number with the format of "E2E-X□□□T□"
(Example: E2E-X8MB1T12 2M).
Operation mode NO can be changed to NC via IO-Link communications.
2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
14
E2E/E2EQ NEXT Series
BASIC Model
E2E NEXT Series (Single distance model)
DC 3-wire [Refer to Dimensions on page 51.]
Shielded
Size (Sensing
distance)
Connection method
Body size
38 mm *2
Pre-wired (2 m) *1
48 mm
M12 Pre-wired
Smartclick Connector (0.3 m)
38 mm *3
48 mm
43 mm
M8
(1.5 mm)
M12 Connector
53 mm
39 mm
M8 Connector (4-pin)
49 mm
39 mm
M8 Connector (3-pin)
49 mm
47 mm *2
Operation
mode
69 mm
E2E-X1R5B1D8 2M
E2E-X1R5C18 2M
NC
E2E-X1R5B28 2M
E2E-X1R5C28 2M
NO
E2E-X1R5B1DL8 2M
E2E-X1R5C1L8 2M
NC
E2E-X1R5B2L8 2M
E2E-X1R5C2L8 2M
NO
E2E-X1R5B1D8-M1TJ 0.3M
E2E-X1R5C18-M1TJ 0.3M
NC
E2E-X1R5B28-M1TJ 0.3M
E2E-X1R5C28-M1TJ 0.3M
NO
E2E-X1R5B1DL8-M1TJ 0.3M
E2E-X1R5C1L8-M1TJ 0.3M
NC
E2E-X1R5B2L8-M1TJ 0.3M
E2E-X1R5C2L8-M1TJ 0.3M
NO
E2E-X1R5B1D8-M1
E2E-X1R5C18-M1
NC
E2E-X1R5B28-M1
E2E-X1R5C28-M1
NO
E2E-X1R5B1DL8-M1
E2E-X1R5C1L8-M1
NC
E2E-X1R5B2L8-M1
E2E-X1R5C2L8-M1
NO+NC
E2E-X1R5B3DL8-M1
E2E-X1R5C3L8-M1
NO
E2E-X1R5B1D8-M3
E2E-X1R5C18-M3
NC
E2E-X1R5B28-M3
E2E-X1R5C28-M3
NO
E2E-X1R5B1DL8-M3
E2E-X1R5C1L8-M3
NC
E2E-X1R5B2L8-M3
E2E-X1R5C2L8-M3
NO
E2E-X1R5B1D8-M5
E2E-X1R5C18-M5
NC
E2E-X1R5B28-M5
E2E-X1R5C28-M5
NO
E2E-X1R5B1DL8-M5
E2E-X1R5C1L8-M5
NC
E2E-X1R5B2L8-M5
E2E-X1R5C2L8-M5
NO
E2E-X2B1D12 2M
E2E-X2C112 2M
NC
E2E-X2B212 2M
E2E-X2C212 2M
E2E-X2B3D12 2M
E2E-X2C312 2M
NO
E2E-X2B1DL12 2M
E2E-X2C1L12 2M
NC
E2E-X2B2L12 2M
E2E-X2C2L12 2M
E2E-X2B3DL12 2M
E2E-X2C3L12 2M
NO
E2E-X2B1D12-M1TJ 0.3M
E2E-X2C112-M1TJ 0.3M
NC
E2E-X2B212-M1TJ 0.3M
E2E-X2C212-M1TJ 0.3M
E2E-X2B3D12-M1TJ 0.3M
E2E-X2C312-M1TJ 0.3M
NO
E2E-X2B1DL12-M1TJ 0.3M
E2E-X2C1L12-M1TJ 0.3M
NC
E2E-X2B2L12-M1TJ 0.3M
E2E-X2C2L12-M1TJ 0.3M
E2E-X2B3DL12-M1TJ 0.3M
E2E-X2C3L12-M1TJ 0.3M
NO
E2E-X2B1D12-M1
E2E-X2C112-M1
NC
E2E-X2B212-M1
E2E-X2C212-M1
NO+NC
E2E-X2B3D12-M1
E2E-X2C312-M1
NO
E2E-X2B1DL12-M1
E2E-X2C1L12-M1
NC
E2E-X2B2L12-M1
E2E-X2C2L12-M1
E2E-X2B3DL12-M1
E2E-X2C3L12-M1
NO+NC
47 mm *3
M12
(2 mm)
NO+NC
M12 Pre-wired
Smartclick Connector (0.3 m)
69 mm
NO+NC
48 mm
M12 Connector
70 mm
NPN
NO
NO+NC
Pre-wired (2 m) *1
Model
PNP
NO+NC
15
E2E/E2EQ NEXT Series
BASIC Model
Size (Sensing
distance)
Connection method
Body size
55 mm *2
Operation
mode
77 mm
E2E-X5B1D18 2M
E2E-X5C118 2M
NC
E2E-X5B218 2M
E2E-X5C218 2M
E2E-X5B3D18 2M
E2E-X5C318 2M
NO
E2E-X5B1DL18 2M
E2E-X5C1L18 2M
NC
E2E-X5B2L18 2M
E2E-X5C2L18 2M
E2E-X5B3DL18 2M
E2E-X5C3L18 2M
NO
E2E-X5B1D18-M1TJ 0.3M
E2E-X5C118-M1TJ 0.3M
NC
E2E-X5B218-M1TJ 0.3M
E2E-X5C218-M1TJ 0.3M
NO+NC
E2E-X5B3D18-M1TJ 0.3M
E2E-X5C318-M1TJ 0.3M
NO
E2E-X5B1DL18-M1TJ 0.3M
E2E-X5C1L18-M1TJ 0.3M
NC
E2E-X5B2L18-M1TJ 0.3M
E2E-X5C2L18-M1TJ 0.3M
E2E-X5B3DL18-M1TJ 0.3M
E2E-X5C3L18-M1TJ 0.3M
NO
E2E-X5B1D18-M1
E2E-X5C118-M1
NC
E2E-X5B218-M1
E2E-X5C218-M1
E2E-X5B3D18-M1
E2E-X5C318-M1
NO
E2E-X5B1DL18-M1
E2E-X5C1L18-M1
NC
E2E-X5B2L18-M1
E2E-X5C2L18-M1
NO+NC
E2E-X5B3DL18-M1
E2E-X5C3L18-M1
NO
E2E-X10B1D30 2M
E2E-X10C130 2M
NC
E2E-X10B230 2M
E2E-X10C230 2M
E2E-X10B3D30 2M
E2E-X10C330 2M
NO
E2E-X10B1DL30 2M
E2E-X10C1L30 2M
NC
E2E-X10B2L30 2M
E2E-X10C2L30 2M
E2E-X10B3DL30 2M
E2E-X10C3L30 2M
NO
E2E-X10B1D30-M1TJ 0.3M
E2E-X10C130-M1TJ 0.3M
NC
E2E-X10B230-M1TJ 0.3M
E2E-X10C230-M1TJ 0.3M
E2E-X10B3D30-M1TJ 0.3M
E2E-X10C330-M1TJ 0.3M
NO
E2E-X10B1DL30-M1TJ 0.3M
E2E-X10C1L30-M1TJ 0.3M
NC
E2E-X10B2L30-M1TJ 0.3M
E2E-X10C2L30-M1TJ 0.3M
E2E-X10B3DL30-M1TJ 0.3M
E2E-X10C3L30-M1TJ 0.3M
NO
E2E-X10B1D30-M1
E2E-X10C130-M1
NC
E2E-X10B230-M1
E2E-X10C230-M1
E2E-X10B3D30-M1
E2E-X10C330-M1
NO
E2E-X10B1DL30-M1
E2E-X10C1L30-M1
NC
E2E-X10B2L30-M1
E2E-X10C2L30-M1
E2E-X10B3DL30-M1
E2E-X10C3L30-M1
NO+NC
55 mm *3
M18
(5 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
77 mm
NO+NC
53 mm
NO+NC
M12 Connector
75 mm
60 mm *2
NO+NC
Pre-wired (2 m) *1
82 mm
NO+NC
60 mm *3
M30
(10 mm)
NO+NC
M12 Pre-wired
Smartclick Connector (0.3 m)
82 mm
NO+NC
58 mm
NO+NC
M12 Connector
80 mm
NPN
NO
NO+NC
Pre-wired (2 m) *1
Model
PNP
NO+NC
*1. Models with 5-m cable length are also available (Example: E2E-X2B1D12 5M)
*2. Models with 2-m and 5-m robot (bending-resistant) cables are also available with "-R" in the model number. (Example: E2E-X2B1D12-R 2M/
E2E-X2B1D12-R 5M)
*3. Models with M12 Smartclick connector model robot (bending-resistant) cables are also available with R" in the model number. (Example: E2EX2B1D12-M1TJR 0.3M)
Note: 1. Models in
are equipped with IO-Link (COM2). For IO-Link (COM3), select a model number with the format of "E2E-X□□□T□"
(Example: E2E-X2B1T12 2M).
Operation mode NO can be changed to NC via IO-Link communications.
2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
16
E2E/E2EQ NEXT Series
BASIC Model
E2E NEXT Series (Single distance model)
DC 3-wire [Refer to Dimensions on page 51.]
Unshielded
Size (Sensing
distance)
Connection method
Body size
38 mm *2
Pre-wired (2 m) *1
48 mm
M12 Pre-wired
Smartclick Connector (0.3 m)
38 mm *3
48 mm
43 mm
M8
(2mm)
M12 Connector
53 mm
Operation
mode
M8 Connector (4-pin)
49 mm
39 mm
M8 Connector (3-pin)
49 mm
47 mm *2
E2E-X2MB1D8 2M
E2E-X2MC18 2M
NC
E2E-X2MB28 2M
E2E-X2MC28 2M
NO
E2E-X2MB1DL8 2M
E2E-X2MC1L8 2M
NC
E2E-X2MB2L8 2M
E2E-X2MC2L8 2M
NO
E2E-X2MB1D8-M1TJ 0.3M
E2E-X2MC18-M1TJ 0.3M
NC
E2E-X2MB28-M1TJ 0.3M
E2E-X2MC28-M1TJ 0.3M
NO
E2E-X2MB1DL8-M1TJ 0.3M
E2E-X2MC1L8-M1TJ 0.3M
NC
E2E-X2MB2L8-M1TJ 0.3M
E2E-X2MC2L8-M1TJ 0.3M
NO
E2E-X2MB1D8-M1
E2E-X2MC18-M1
NC
E2E-X2MB28-M1
E2E-X2MC28-M1
NO
E2E-X2MB1DL8-M1
E2E-X2MC1L8-M1
NC
E2E-X2MB2L8-M1
E2E-X2MC2L8-M1
E2E-X2MB3DL8-M1
E2E-X2MC3L8-M1
NO
E2E-X2MB1D8-M3
E2E-X2MC18-M3
NC
E2E-X2MB28-M3
E2E-X2MC28-M3
NO
E2E-X2MB1DL8-M3
E2E-X2MC1L8-M3
NC
E2E-X2MB2L8-M3
E2E-X2MC2L8-M3
NO
E2E-X2MB1D8-M5
E2E-X2MC18-M5
NC
E2E-X2MB28-M5
E2E-X2MC28-M5
NO
E2E-X2MB1DL8-M5
E2E-X2MC1L8-M5
NC
E2E-X2MB2L8-M5
E2E-X2MC2L8-M5
NO
E2E-X5MB1D12 2M
E2E-X5MC112 2M
NC
E2E-X5MB212 2M
E2E-X5MC212 2M
E2E-X5MB3D12 2M
E2E-X5MC312 2M
NO
E2E-X5MB1DL12 2M
E2E-X5MC1L12 2M
NC
E2E-X5MB2L12 2M
E2E-X5MC2L12 2M
E2E-X5MB3DL12 2M
E2E-X5MC3L12 2M
NO
E2E-X5MB1D12-M1TJ 0.3M
E2E-X5MC112-M1TJ 0.3M
NC
E2E-X5MB212-M1TJ 0.3M
E2E-X5MC212-M1TJ 0.3M
NO+NC
E2E-X5MB3D12-M1TJ 0.3M
E2E-X5MC312-M1TJ 0.3M
NO
E2E-X5MB1DL12-M1TJ 0.3M
E2E-X5MC1L12-M1TJ 0.3M
NC
E2E-X5MB2L12-M1TJ 0.3M
E2E-X5MC2L12-M1TJ 0.3M
E2E-X5MB3DL12-M1TJ 0.3M
E2E-X5MC3L12-M1TJ 0.3M
NO
E2E-X5MB1D12-M1
E2E-X5MC112-M1
NC
E2E-X5MB212-M1
E2E-X5MC212-M1
E2E-X5MB3D12-M1
E2E-X5MC312-M1
NO
E2E-X5MB1DL12-M1
E2E-X5MC1L12-M1
NC
E2E-X5MB2L12-M1
E2E-X5MC2L12-M1
E2E-X5MB3DL12-M1
E2E-X5MC3L12-M1
NO+NC
Pre-wired (2 m) *1
69 mm
NO+NC
47 mm *3
M12
(5mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
69 mm
NO+NC
48 mm
NO+NC
M12 Connector
70 mm
NPN
NO
NO+NC
39 mm
Model
PNP
NO+NC
17
E2E/E2EQ NEXT Series
BASIC Model
Size (Sensing
distance)
Connection method
Body size
55 mm *2
Pre-wired (2 m) *1
77 mm
Operation
mode
M18
(10mm)
E2E-X10MB1D18 2M
E2E-X10MC118 2M
NC
E2E-X10MB218 2M
E2E-X10MC218 2M
NO+NC
E2E-X10MB3D18 2M
E2E-X10MC318 2M
NO
E2E-X10MB1DL18 2M
E2E-X10MC1L18 2M
NC
E2E-X10MB2L18 2M
E2E-X10MC2L18 2M
E2E-X10MB3DL18 2M
E2E-X10MC3L18 2M
NO
E2E-X10MB1D18-M1TJ 0.3M
E2E-X10MC118-M1TJ 0.3M
NC
E2E-X10MB218-M1TJ 0.3M
E2E-X10MC218-M1TJ 0.3M
E2E-X10MB3D18-M1TJ 0.3M
E2E-X10MC318-M1TJ 0.3M
NO
E2E-X10MB1DL18-M1TJ 0.3M
E2E-X10MC1L18-M1TJ 0.3M
NC
E2E-X10MB2L18-M1TJ 0.3M
E2E-X10MC2L18-M1TJ 0.3M
E2E-X10MB3DL18-M1TJ 0.3M
E2E-X10MC3L18-M1TJ 0.3M
NO
E2E-X10MB1D18-M1
E2E-X10MC118-M1
NC
E2E-X10MB218-M1
E2E-X10MC218-M1
E2E-X10MB3D18-M1
E2E-X10MC318-M1
NO
E2E-X10MB1DL18-M1
E2E-X10MC1L18-M1
NC
E2E-X10MB2L18-M1
E2E-X10MC2L18-M1
E2E-X10MB3DL18-M1
E2E-X10MC3L18-M1
NO
E2E-X18MB1D30 2M
E2E-X18MC130 2M
NC
E2E-X18MB230 2M
E2E-X18MC230 2M
NO+NC
E2E-X18MB3D30 2M
E2E-X18MC330 2M
NO
E2E-X18MB1DL30 2M
E2E-X18MC1L30 2M
NC
E2E-X18MB2L30 2M
E2E-X18MC2L30 2M
E2E-X18MB3DL30 2M
E2E-X18MC3L30 2M
NO
E2E-X18MB1D30-M1TJ 0.3M
E2E-X18MC130-M1TJ 0.3M
NC
E2E-X18MB230-M1TJ 0.3M
E2E-X18MC230-M1TJ 0.3M
E2E-X18MB3D30-M1TJ 0.3M
E2E-X18MC330-M1TJ 0.3M
NO
E2E-X18MB1DL30-M1TJ 0.3M
E2E-X18MC1L30-M1TJ 0.3M
NC
E2E-X18MB2L30-M1TJ 0.3M
E2E-X18MC2L30-M1TJ 0.3M
E2E-X18MB3DL30-M1TJ 0.3M
E2E-X18MC3L30-M1TJ 0.3M
NO
E2E-X18MB1D30-M1
E2E-X18MC130-M1
NC
E2E-X18MB230-M1
E2E-X18MC230-M1
E2E-X18MB3D30-M1
E2E-X18MC330-M1
NO
E2E-X18MB1DL30-M1
E2E-X18MC1L30-M1
NC
E2E-X18MB2L30-M1
E2E-X18MC2L30-M1
E2E-X18MB3DL30-M1
E2E-X18MC3L30-M1
NO+NC
M12 Pre-wired
Smartclick Connector (0.3 m)
77 mm
NO+NC
53 mm
NO+NC
M12 Connector
75 mm
NO+NC
60 mm *2
Pre-wired (2 m) *1
82 mm
NO+NC
60 mm *3
M30
(18mm)
NO+NC
M12 Pre-wired
Smartclick Connector (0.3 m)
82 mm
NO+NC
58 mm
NO+NC
M12 Connector
80 mm
NPN
NO
NO+NC
55 mm *3
Model
PNP
NO+NC
*1. Models with 5-m cable length are also available (Example: E2E-X5MB1D12 5M)
*2. Models with 2-m and 5-m robot (bending-resistant) cables are also available with "-R" in the model number. (Example: E2E-X5MB1D12-R 2M/
E2E-X5MB1D12-R 5M)
*3. Models with M12 Smartclick connector model robot (bending-resistant) cables are also available with R" in the model number. (Example: E2EX5MB1D12-M1TJR 2M)
Note: 1. Models in
are equipped with IO-Link (COM2). For IO-Link (COM3), select a model number with the format of "E2E-X□□□T□"
(Example: E2E-X5MB1T12 2M).
Operation mode NO can be changed to NC via IO-Link communications.
2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
18
E2E/E2EQ NEXT Series
BASIC Model
E2EQ NEXT Series (Spatter-resistant Double distance model)
DC 3-wire [Refer to Dimensions on page 51.]
Shielded
Size (Sensing
distance)
Connection method
Pre-wired (2 m) *
M8
(2 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
M12 Connector
Pre-wired (2 m) *
Body size
38 mm
38 mm
43 mm
47 mm
M12 Pre-wired
Smartclick Connector (0.3 m)
M12 Connector
Pre-wired (2 m) *
47 mm
55 mm
E2EQ-X2C18 2M
NC
E2EQ-X2B28 2M
E2EQ-X2C28 2M
NO
E2EQ-X2B1D8-M1TJ 0.3M
E2EQ-X2C18-M1TJ 0.3M
NC
E2EQ-X2B28-M1TJ 0.3M
E2EQ-X2C28-M1TJ 0.3M
NO
E2EQ-X2B1D8-M1
E2EQ-X2C18-M1
NC
E2EQ-X2B28-M1
E2EQ-X2C28-M1
NO
E2EQ-X4B1D12 2M
E2EQ-X4C112 2M
NC
E2EQ-X4B212 2M
E2EQ-X4C212 2M
E2EQ-X4B3D12 2M
E2EQ-X4C312 2M
NO
E2EQ-X4B1D12-M1TJ 0.3M
E2EQ-X4C112-M1TJ 0.3M
NC
E2EQ-X4B212-M1TJ 0.3M
E2EQ-X4C212-M1TJ 0.3M
E2EQ-X4B3D12-M1TJ 0.3M
E2EQ-X4C312-M1TJ 0.3M
NO
E2EQ-X4B1D12-M1
E2EQ-X4C112-M1
NC
E2EQ-X4B212-M1
E2EQ-X4C212-M1
NO+NC
E2EQ-X4B3D12-M1
E2EQ-X4C312-M1
NO
E2EQ-X8B1D18 2M
E2EQ-X8C118 2M
NC
E2EQ-X8B218 2M
E2EQ-X8C218 2M
E2EQ-X8B3D18 2M
E2EQ-X8C318 2M
NO
E2EQ-X8B1D18-M1TJ 0.3M
E2EQ-X8C118-M1TJ 0.3M
NC
E2EQ-X8B218-M1TJ 0.3M
E2EQ-X8C218-M1TJ 0.3M
E2EQ-X8B3D18-M1TJ 0.3M
E2EQ-X8C318-M1TJ 0.3M
NO
E2EQ-X8B1D18-M1
E2EQ-X8C118-M1
NC
E2EQ-X8B218-M1
E2EQ-X8C218-M1
NO+NC
E2EQ-X8B3D18-M1
E2EQ-X8C318-M1
NO
E2EQ-X15B1D30 2M
E2EQ-X15C130 2M
NC
E2EQ-X15B230 2M
E2EQ-X15C230 2M
E2EQ-X15B3D30 2M
E2EQ-X15C330 2M
NO
E2EQ-X15B1D30-M1TJ 0.3M
E2EQ-X15C130-M1TJ 0.3M
NC
E2EQ-X15B230-M1TJ 0.3M
E2EQ-X15C230-M1TJ 0.3M
E2EQ-X15B3D30-M1TJ 0.3M
E2EQ-X15C330-M1TJ 0.3M
NO
E2EQ-X15B1D30-M1
E2EQ-X15C130-M1
NC
E2EQ-X15B230-M1
E2EQ-X15C230-M1
E2EQ-X15B3D30-M1
E2EQ-X15C330-M1
NO+NC
M18
(8 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
M12 Connector
Pre-wired (2 m) *
55 mm
NO+NC
53 mm
60 mm
NO+NC
M30
(15 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
M12 Connector
60 mm
NO+NC
58 mm
NPN
E2EQ-X2B1D8 2M
NO+NC
48 mm
PNP
NO
NO+NC
M12
(4 mm)
Model
Operation
mode
NO+NC
* Models with 5-m cable length are also available (Example: E2EQ-X6B1D12 5M)
Note: 1. Models in
are equipped with IO-Link (COM2). For IO-Link (COM3), select a model number with the format of "E2E-X□□□T□"
(Example: E2EQ-X6B1T12 2M).
Operation mode NO can be changed to NC via IO-Link communications.
2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
19
E2E/E2EQ NEXT Series
BASIC Model
E2EQ NEXT Series (Spatter-resistant Single distance model)
DC 3-wire [Refer to Dimensions on page 51.]
Shielded
Size (Sensing
distance)
Connection method
Pre-wired (2 m) *
M8
(1.5 mm)
Body size
38 mm
M12 Pre-wired
Smartclick Connector (0.3 m)
38 mm
M12 Connector
43 mm
Pre-wired (2 m) *
47 mm
M12 Pre-wired
Smartclick Connector (0.3 m)
M12 Connector
Pre-wired (2 m) *
47 mm
55 mm
E2EQ-X1R5C18 2M
E2EQ-X1R5C28 2M
NC
E2EQ-X1R5B28 2M
NO
E2EQ-X1R5B1D8-M1TJ 0.3M
E2EQ-X1R5C18-M1TJ 0.3M
NC
E2EQ-X1R5B28-M1TJ 0.3M
E2EQ-X1R5C28-M1TJ 0.3M
NO
E2EQ-X1R5B1D8-M1
E2EQ-X1R5C18-M1
NC
E2EQ-X1R5B28-M1
E2EQ-X1R5C28-M1
NO
E2EQ-X2B1D12 2M
E2EQ-X2C112 2M
NC
E2EQ-X2B212 2M
E2EQ-X2C212 2M
E2EQ-X2B3D12 2M
E2EQ-X2C312 2M
NO
E2EQ-X2B1D12-M1TJ 0.3M
E2EQ-X2C112-M1TJ 0.3M
NC
E2EQ-X2B212-M1TJ 0.3M
E2EQ-X2C212-M1TJ 0.3M
E2EQ-X2B3D12-M1TJ 0.3M
E2EQ-X2C312-M1TJ 0.3M
NO
E2EQ-X2B1D12-M1
E2EQ-X2C112-M1
NC
E2EQ-X2B212-M1
E2EQ-X2C212-M1
NO+NC
E2EQ-X2B3D12-M1
E2EQ-X2C312-M1
NO
E2EQ-X5B1D18 2M
E2EQ-X5C118 2M
NC
E2EQ-X5B218 2M
E2EQ-X5C218 2M
E2EQ-X5B3D18 2M
E2EQ-X5C318 2M
NO+NC
M18
(5 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
M12 Connector
Pre-wired (2 m) *
55 mm
NO
E2EQ-X5B1D18-M1TJ 0.3M
E2EQ-X5C118-M1TJ 0.3M
NC
E2EQ-X5B218-M1TJ 0.3M
E2EQ-X5C218-M1TJ 0.3M
E2EQ-X5B3D18-M1TJ 0.3M
E2EQ-X5C318-M1TJ 0.3M
NO+NC
53 mm
60 mm
NO
E2EQ-X5B1D18-M1
E2EQ-X5C118-M1
NC
E2EQ-X5B218-M1
E2EQ-X5C218-M1
NO+NC
E2EQ-X5B3D18-M1
E2EQ-X5C318-M1
NO
E2EQ-X10B1D30 2M
E2EQ-X10C130 2M
NC
E2EQ-X10B230 2M
E2EQ-X10C230 2M
E2EQ-X10B3D30 2M
E2EQ-X10C330 2M
NO+NC
M30
(10 mm)
M12 Pre-wired
Smartclick Connector (0.3 m)
M12 Connector
60 mm
NO
E2EQ-X10B1D30-M1TJ 0.3M
E2EQ-X10C130-M1TJ 0.3M
NC
E2EQ-X10B230-M1TJ 0.3M
E2EQ-X10C230-M1TJ 0.3M
E2EQ-X10B3D30-M1TJ 0.3M
E2EQ-X10C330-M1TJ 0.3M
NO+NC
58 mm
NPN
E2EQ-X1R5B1D8 2M
NO+NC
48 mm
PNP
NO
NO+NC
M12
(2 mm)
Model
Operation
mode
NO
E2EQ-X10B1D30-M1
E2EQ-X10C130-M1
NC
E2EQ-X10B230-M1
E2EQ-X10C230-M1
E2EQ-X10B3D30-M1
E2EQ-X10C330-M1
NO+NC
* Models with 5-m cable length are also available (Example: E2EQ-X6B1D12 5M)
Note: 1. Models in
are equipped with IO-Link (COM2). For IO-Link (COM3), select a model number with the format of "E2E-X□□□T□"
(Example: E2EQ-X6B1T12 2M).
Operation mode NO can be changed to NC via IO-Link communications.
2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
20
E2E/E2EQ NEXT Series
Accessories (Sold Separately)
Sensor I/O Connectors
(Models for Pre-wired Connectors) A Sensor I/O Connector is not provided with the Sensor. It must be ordered separately
as required.
Round Oil-resistant Connectors XS5 NEXT series
Appearance
Cable
specification
Oil-resistant
PVC cable
M12
Smartclick
Connector Models
Oil-resistant
PVC robot cable
Type
Cable
diameter
(mm)
Sockets on One
Cable End
6 dia.
Sockets on One
Cable End
Cable connection
direction
Straight
6 dia.
Straight
Straight type
Oil-resistant
PVC cable
Oil-resistant
PVC robot cable
Socket and Plug
on Cable Ends
Straight (Socket)/
Straight (Plug)
6 dia.
Socket and Plug
on Cable Ends
Straight (Socket)/
Straight (Plug)
6 dia.
Cable
length (m)
Sensor I/O Connector
model number
1
XS5F-D421-C80-X
2
XS5F-D421-D80-X
3
XS5F-D421-E80-X
5
XS5F-D421-G80-X
10
XS5F-D421-J80-X
1
XS5F-D421-C80-XR
2
XS5F-D421-D80-XR
3
XS5F-D421-E80-XR
5
XS5F-D421-G80-XR
10
XS5F-D421-J80-XR
1
XS5W-D421-C81-X
2
XS5W-D421-D81-X
3
XS5W-D421-E81-X
5
XS5W-D421-G81-X
10
XS5W-D421-J81-X
1
XS5W-D421-C81-XR
2
XS5W-D421-D81-XR
3
XS5W-D421-E81-XR
5
XS5W-D421-G81-XR
10
XS5W-D421-J81-XR
Applicable Proximity
Sensor model number
□□□-M1TJ(R)
□□□-M1TJ
E2E(Q)-X□□□-M1
E2E-X
E2EQ-X
Note: For details of the connector, refer to XS5 NEXT Series on page 87.
Round Water-resistant Connectors XS5 series
□
Cable
Appearance
Cable
Specification
Type
diameter
□
Cable Connection
Direction
(mm)
Sockets on One
Cable End
XS5F-D421-C80-F
2
XS5F-D421-D80-F
3
XS5F-D421-E80-F
5
XS5F-D421-G80-F
10
XS5F-D421-J80-F
1
XS5F-D422-C80-F
2
XS5F-D422-D80-F
3
XS5F-D422-E80-F
5
XS5F-D422-G80-F
10
XS5F-D422-J80-F
1
XS5W-D421-C81-F
2
XS5W-D421-D81-F
3
XS5W-D421-E81-F
5
XS5W-D421-G81-F
10
XS5W-D421-J81-F
Right-angle (Socket)/
Right-angle (Plug)
2
XS5W-D422-D81-F
5
XS5W-D422-G81-F
Straight (Socket)/
Right-angle (Plug)
2
XS5W-D423-D81-F
5
XS5W-D423-G81-F
Right-angle (Socket)/
Straight (Plug)
2
XS5W-D424-D81-F
5
XS5W-D424-G81-F
6 dia.
Right-angle
Straight type
PVC robot cable
Straight (Socket)/
Straight (Plug)
Right-angle type
Socket and Plug
on Cable Ends
6 dia.
Sensor I/O Connector
model number
1
Straight
M12
Smartclick
Connector
Cable
length
(m)
Applicable Proximity
Sensor model
number
□□□-M1TJ(R)
E2EQ-X□□□-M1TJ
E2E(Q)-X□□□-M1
E2E-X
Note: For details of the connector, refer to XS5 Series on page 94.
21
E2E/E2EQ NEXT Series
Round Water-resistant Connectors XS3W-M8/XS3F-M8 series
Appearance
Cable
specification
Cable
No. of
diameter cable cores
(mm)
(Poles)
Type
Cable connection
direction
Straight
3
Right-angle
Sockets on One
Cable End
M8 Connector
Straight type
Straight
4
Right-angle
5 dia.
PVC cable
Straight (Plug)/
Straight (Socket)
Right-angle type
3
Straight (Plug)/
Right-angle (Socket)
Socket and Plug
on Cable Ends
Straight (Plug)/
Straight (Socket)
4
Straight (Plug)/
Right-angle (Socket)
Cable
length
(m)
Sensor I/O Connector
model number
2
XS3F-M8PVC3S2M
5
XS3F-M8PVC3S5M
10
XS3F-M8PVC3S10M
2
XS3F-M8PVC3A2M
Applicable
Proximity Sensor
model number
□□□-M5
E2E-X
5
XS3F-M8PVC3A5M
10
XS3F-M8PVC3A10M
2
XS3F-M8PVC4S2M
5
XS3F-M8PVC4S5M
10
XS3F-M8PVC4S10M
2
XS3F-M8PVC4A2M
5
XS3F-M8PVC4A5M
□□□-M3
E2E-X
10
XS3F-M8PVC4A10M
2
XS3W-M8PVC3SS2M
5
XS3W-M8PVC3SS5M
10
XS3W-M8PVC3SS10M
2
XS3W-M8PVC3SA2M
5
XS3W-M8PVC3SA5M
10
XS3W-M8PVC3SA10M
2
XS3W-M8PVC4SS2M
5
XS3W-M8PVC4SS5M
10
XS3W-M8PVC4SS10M
2
XS3W-M8PVC4SA2M
5
XS3W-M8PVC4SA5M
10
XS3W-M8PVC4SA10M
□□□-M5
E2E-X
□□□-M3
E2E-X
Note: For details of the connector, refer to XS3W-M8/XS3F-M8 Series on page 102.
Sensor I/O Connectors Oil resistance performance of mating combination
E2E NEXT Series
Connecting method
Pre-wired Connector Models
M12 Connector Models
M8 Connector (4-pin) Models
M8 Connector (3-pin) Models
Applicable connector Model
Model
□□-M1TJ(R)
E2E-X□□-M1
E2E-X□□-M3
E2E-X□□-M5
E2E-X
XS5 NEXT Series
XS5 Series
Oil resistant (2 years) *
Water-resistant (IP67)
XS3W-M8/XS3F-M8 Series
---
Water-resistant (IP67)
Water-resistant (IP67)
---
---
---
Water-resistant (IP67)
---
---
Water-resistant (IP67)
* Applicable cutting oil type: specified in JIS K 2241:2000
2 years of oil resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical value).
Products to be shipped will have around 2 years of oil resistance, but will very depending on the product.
Quick fix (Mounting Sleeves) [Refer to Dimensions on page 52.]
A Mounting Bracket is not provided with the Sensor. It must be ordered separately as required.
Only applicable to standard body-sized E2E NEXT Series Sensors.
Appearance
Model
Applicable Sensors
Y92E-J8S12
E2E NEXT M8 Shielded Sensors
Y92E-J12S18
E2E NEXT M12 Shielded Sensors
Y92E-J18S30
E2E NEXT M18 Shielded Sensors
Note: Not applicable for E2E NEXT Series long-body models and E2EQ NEXT Series (spatter-resistant) models.
22
E2E/E2EQ NEXT Series
Ratings and Specifications
PREMIUM Model
E2E NEXT Series (Quadruple/Triple distance model)
DC 3-wire
Shielded
Types
Quadruple distance model
M8
Model
E2E-X4
E2E-X9
Sensing distance
4 mm±10%
9 mm±10%
14 mm±10%
23 mm±10%
3 mm±10%
6 mm±10%
12 mm±10%
22 mm±10%
Setting distance
0 to 3 mm
0 to 6.8 mm
0 to 10.6 mm
0 to 17.6 mm
0 to 2.4 mm
0 to 4.8 mm
0 to 9.6 mm
0 to 16.8 mm
Differential travel
15% max. of sensing distance
Detectable object
Ferrous metals (For non-ferrous metals, refer to the Engineering Data on page 34.)
Standard sensing
object
Iron,
Iron,
Iron,
Iron,
Iron,
12 × 12 × 1 mm 27 × 27 × 1 mm 42 × 42 × 1 mm 69 × 69 × 1 mm 9 × 9 × 1 mm
Iron,
Iron,
Iron,
18 × 18 × 1 mm 36 × 36 × 1 mm 66 × 66 × 1 mm
Response frequency
*1
700 Hz
800 Hz
Power supply voltage
10 to 30 VDC (including 10% ripple (p-p)), Class 2
Current consumption
1-output models:16 mA max.
Output configuration
B
Operation mode
(with sensing object
approaching)
1-output models (B1, C1): NO (Normally open),
1-output models (B2, C2): NC (Normally closed)
Item
Control
output
□8
M12
Triple distance model
Size
□12
700 Hz
M18
M30
M8
E2E-X14
E2E-X23
E2E-X3
□18
350 Hz
□30
200 Hz
□8
1,000 Hz
M12
M18
M30
E2E-X6
E2E-X12
E2E-X22
□12
□18
500 Hz
□30
200 Hz
1-output models: 16 mA max.,
2-output models: 20 mA max.
□ Models: PNP open collector, C□ Models: NPN open collector
1-output models (B1, C1): NO (Normally open),
1-output models (B2, C2): NC (Normally closed),
2-output models (B3, C3): NO+NC (Normally open,
Normally closed)
Load
current
1-output models:
10 to 30 VDC, Class 2, 50 mA max.
1-output models:
10 to 30 VDC,
Class 2, 100 mA
max.
1-output models:
10 to 30 VDC, Class 2, 100 mA max.,
2-output models:
10 to 30 VDC, Class 2, 50 mA max.
Residual
voltage
1-output models:
2 V max. (Load current: 50 mA, Cable length: 2 m)
1-output models:
2 V max.
(Load current:
100 mA, Cable
length: 2 m)
1-output models:
2 V max. (Load current: 100 mA, Cable length: 2 m),
2-output models:
2 V max. (Load current: 50 mA, Cable length: 2 m)
Indicator *2
In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and communication indicator (green, not lit)
In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals)
Protection circuits
Power supply reverse polarity protection, Surge suppressor, Output short-circuit protection, Output reverse polarity protection
Ambient temperature
range
Operating:
-25 to 60°C
Storage:
-25 to 70°C
(with no icing or
condensation)
Ambient humidity
range
Operating/Storage: 35% to 95% (with no condensation)
Temperature
influence
-15% to 25%
max. of
sensing
distance at
23°C in the
temperature
range of -25 to
60°C
Voltage influence
±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance
50 M min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance
(destruction)
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
(destruction)
500 m/s2 10
times each in
X, Y, and Z
directions
Degree of protection
Pre-wired Models, Pre-wired Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex
1: IP67G, Passed OMRON's Oil-resistant Component Evaluation Standards *3 (Cutting oil type: specified in JIS K 2241: 2000; Temperature:
35°C max.)
Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART9): IP69K
Connection method
Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard cable length: 0.3 m) and Connector Models (M12
Connector, M8 (4-pin) Connector and M8 (3-pin) Connector)
Pre-wired
M12
Weight *4
Pre-wired
(packed
Smartclick
state)
Connector
Connector
Operating/Storage: -25 to 70°C (with no icing or condensation)
±15% max. of sensing distance at 23°C in the
temperature range of -25 to 70°C
1,000 m/s2 10 times each in X, Y, and Z directions
±10% max. of sensing distance at 23°C in the temperature range of
-25 to 70°C
500 m/s2 10
times each in
X, Y, and Z
directions
1,000 m/s2 10 times each in X, Y, and Z directions
Approx. 85 g
Approx. 95 g
Approx. 180 g
Approx. 260 g
Approx. 85 g
Approx. 95 g
Approx. 180 g
Approx. 260 g
Approx. 55 g
Approx. 70 g
Approx. 115 g
Approx. 200 g
Approx. 55 g
Approx. 70 g
Approx. 115 g
Approx. 200 g
Approx. 95 g
Approx. 180 g
Approx. 40 g *5 Approx. 55 g
Approx. 95 g
Approx. 180 g
Approx. 40 g *5 Approx. 55 g
23
E2E/E2EQ NEXT Series
Types
Item
Materials
M8
Model
E2E-X4
□8
M12
E2E-X9
□12
Case
Nickel-plated brass
Sensing
surface
Polybutylene terephthalat (PBT)
Clamping
nuts
Nickel-plated brass
Toothed
washers
Zinc-plated iron
Cable
Vinyl chloride (PVC)
Main IO-Link
functions*2
IO-Link
Commun
ication
specifica
tions *2
Quadruple distance model
Size
Triple distance model
M18
M30
M8
E2E-X14
E2E-X23
E2E-X3
□18
□30
M12
E2E-X6
□12
M18
M30
E2E-X12
E2E-X22
□18
□30
Operation mode switching between NO and NC, sensor internals failure alert, excessive target proximity alarm selection, control output
timer function selection (ON delay, OFF delay, One shot options), instability detection alarm with ON delay timer selection, monitor output
strength, operating hours read-out, readout of the sensor internal temperature, and factory reset
IO-Link
specificati
on
Ver 1.1
Baud rate
COM2 (38.4 kbps), COM3 (230.4 kbps)
Data
length
PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)
Minimum
cycle time
COM2: 2.3 ms, COM3: 0.4 ms
Accessories
□8
Instruction manual, Clamping nuts, Toothed washer
*1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
*2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
*3. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards.
2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical value).
The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5 NEXT series correctly.
The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.
*4. Weight of the standard body-sized model.
*5. Both M8 connectors and M12 connectors are available.
24
E2E/E2EQ NEXT Series
PREMIUM Model
E2E NEXT Series (Quadruple/Triple distance model)
DC 3-wire
Unshielded
Types
Quadruple distance model
Size
Triple distance model
M12
M18
M30
E2E-X8M
E2EX16M 12
E2EX30M 18
E2EX50M 30
E2E-X6M
Sensing distance
8 mm±10%
16 mm±10%
30 mm±10%
50 mm±10%
Setting distance
0 to 6 mm
0 to 12.2 mm
0 to 23 mm
0 to 38.2 mm
Differential travel
15% max. of sensing distance
Detectable object
Ferrous metals (For non-ferrous metals, refer to the Engineering Data on page 34.)
Standard sensing
object
Iron,
Iron,
Iron,
Iron,
Iron,
Iron,
Iron,
Iron,
24 × 24 × 1 mm 48 × 48 × 1 mm 90 × 90 × 1 mm 150 × 150 × 1 mm 18 × 18 × 1 mm 30 × 30 × 1 mm 60 × 60 × 1 mm 120 × 120 × 1 mm
Response frequency
*1
500 Hz
Power supply voltage
10 to 30 VDC (including 10% ripple (p-p)), Class 2
Current consumption
1-output models: 16 mA max.
Output configuration
B
C
Operation mode
(with sensing object
approaching)
1-output models (B1, C1): NO (Normally open),
1-output models (B2, C2): NC (Normally closed)
Item
Control
output
Model
M8
□8
□
400 Hz
□
200 Hz
□
100 Hz
M8
M12
M18
M30
E2EX10M 12
E2EX20M 18
E2EX40M 30
6 mm±10%
10 mm±10%
20 mm±10%
40 mm±10%
0 to 4.8 mm
0 to 8 mm
0 to 16 mm
0 to 32 mm
□8
800 Hz
□
400 Hz
□
200 Hz
□
100 Hz
1-output models: 16 mA max.,
2-output models: 20 mA max.
□ Models: PNP open collector
□ Models: NPN open collector
1-output models (B1, C1): NO (Normally open),
1-output models (B2, C2): NC (Normally closed),
2-output models (B3, C3):
NO+NC (Normally open, Normally closed)
Load
current
1-output models:
10 to 30 VDC, Class 2, 50 mA max.
1-output models:
10 to 30 VDC,
Class 2, 100 mA
max.
1-output models:
10 to 30 VDC, Class 2, 100 mA max.,
2-output models:
10 to 30 VDC, Class 2, 50 mA max.
Residual
voltage
1-output models:
2 V max. (Load current: 50 mA, Cable length: 2 m)
1-output models:
2 V max.
(Load current:
100 mA, Cable
length: 2 m)
1-output models:
2 V max. (Load current: 100 mA, Cable length: 2 m),
2-output models:
2 V max. (Load current: 50 mA, Cable length: 2 m)
Indicator *2
In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and communication indicator (green, not lit)
In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals)
Protection circuits
Power supply reverse polarity protection, Surge suppressor, Output short-circuit protection, Output reverse polarity protection
Ambient temperature
range
Operating/Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity
range
Operating/Storage: 35% to 95% (with no condensation)
Temperature
influence
±15% max. of sensing distance at 23°C in the temperature range of
-25 to 70°C
Voltage influence
±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance
50 M min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance
(destruction)
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
(destruction)
500 m/s2 10
times each in
X, Y, and Z
directions
Degree of protection
Pre-wired Models, Pre-wired Connector Models: IEC 60529:IP67, ISO 20653 (old standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex
1: IP67G, Passed OMRON's Oil-resistant Component Evaluation Standards *3 (Cutting oil type: specified in JIS K 2241: 2000; Temperature:
35°C max.)
Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART9): IP69K
Connection method
Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard cable length: 0.3 m) and Connector Models (M12
Connector, M8 (4-pin) Connector and M8 (3-pin) Connector)
Pre-wired
M12
Weight *4
Pre-wired
(packed
Smartclick
state)
Connector
Connector
1,000 m/s2 10 times each in X, Y, and Z directions
±10% max. of sensing distance at 23°C in the temperature range of
-25 to 70°C
500 m/s2 10
times each in
X, Y, and Z
directions
1,000 m/s2 10 times each in X, Y, and Z directions
Approx. 85 g
Approx. 95 g
Approx. 190 g
Approx. 310 g
Approx. 85 g
Approx. 95 g
Approx. 190 g
Approx. 280 g
Approx. 55 g
Approx. 70 g
Approx. 125 g
Approx. 250 g
Approx. 55 g
Approx. 70 g
Approx. 125 g
Approx. 220 g
Approx. 40 g *5 Approx. 55 g
Approx. 105 g
Approx. 230 g
Approx. 40 g *5 Approx. 55 g
Approx. 105 g
Approx. 200 g
25
E2E/E2EQ NEXT Series
Types
Size
Item
Materials
Model
□8
M18
M30
E2EX16M 12
E2EX30M 18
E2EX50M 30
□
E2E-X8M
Triple distance model
M12
Case
Stainless
(SUS303)
Sensing
surface
Polybutylene terephthalat (PBT)
Clamping
nuts
Nickel-plated brass
Toothed
washers
Zinc-plated iron
Cable
Vinyl chloride (PVC)
Main IO-Link
functions*2
IO-Link
Commun
ication
specifica
tions *2
Quadruple distance model
M8
□
□
Nickel-plated brass
E2E-X6M
Stainless
(SUS303)
□8
M12
M18
M30
E2EX10M 12
E2EX20M 18
E2EX40M 30
□
□
□
Nickel-plated brass
Operation mode switching between NO and NC, sensor internals failure alert, excessive target proximity alarm selection, control output
timer function selection (ON delay, OFF delay, One shot options), instability detection alarm with ON delay timer selection, monitor
output strength, operating hours read-out, readout of the sensor internal temperature, and factory reset
IO-Link
specificati
on
Ver1.1
Baud rate
COM2 (38.4 kbps), COM3 (230.4 kbps)
Data
length
PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)
Minimum
cycle time
COM2: 2.3 ms, COM3: 0.4 ms
Accessories
M8
Instruction manual, Clamping nuts, Toothed washer
*1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
*2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
*3. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards. 2-year oil resistance indicates the
median value of the product design and the oil-resistance performance criterion result (=Typical value). Actual performance can be expected
to decline after two years on average from shipment. The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round
Oil-resistant Connectors XS5 NEXT series correctly. The degree of protection is not satisfied with the part where cable wires are uncovered
for the Pre-wired Models.
*4. Weight of the standard body-sized model.
*5. Both M8 connectors and M12 connectors are available.
26
E2E/E2EQ NEXT Series
PREMIUM Model
E2EQ NEXT Series (Spatter-resistant Triple distance model)
DC 3-wire
Shielded
Types
Triple distance Models
Size
Item
M8
Model
M12
□8
E2EQ-X3
M18
□12
E2EQ-X6
M30
□18
E2EQ-X12
□30
E2EQ-X22
Sensing distance
3 mm±10%
6 mm±10%
12 mm±10%
22 mm±10%
Setting distance
0 to 2.4 mm
0 to 4.8 mm
0 to 9.6 mm
0 to 16.8 mm
Differential travel
15% max. of sensing distance
Detectable object
Ferrous metals (For non-ferrous metals, refer to the Engineering Data on page 34.)
Standard sensing object
Iron, 9 × 9 × 1 mm
Iron, 18 × 18 × 1 mm
Iron, 36 × 36 × 1 mm
Iron, 66 × 66 × 1 mm
Response frequency *1
1,000 Hz
800 Hz
500 Hz
200 Hz
Power supply voltage
10 to 30 VDC (including 10% ripple (p-p)), Class 2
Current consumption
1-output models: 16 mA max.
Output configuration
B
Operation mode
(with sensing object
approaching)
1-output models (B1, C1): NO
(Normally open),
1-output models (B2, C2): NC
(Normally closed)
1-output models (B1, C1): NO (Normally open),
1-output models (B2, C2): NC (Normally closed),
2-output models (B3, C3): NO+NC (Normally open, Normally closed)
Load current
1-output models: 10 to 30 VDC,
Class 2, 100 mA max.
1-output models: 10 to 30 VDC, Class 2, 100 mA max.,,
2-output models: 10 to 30 VDC, Class 2, 50 mA max.
Residual
voltage
1-output models: 2 V max.
(Load current: 100 mA,
Cable length: 2 m)
1-output models: 2 V max. (Load current: 100 mA, Cable length: 2 m),
2-output models: 2 V max. (Load current: 50 mA, Cable length: 2 m)
Control
output
1-output models: 16 mA max.
2-output models: 20 mA max.
□ Models: PNP open collector, C□ Models: NPN open collector
Indicator *2
In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and communication indicator (green, not lit)
In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s
intervals)
Protection circuits
Power supply reverse polarity protection, Surge suppressor, Output short-circuit protection, Output reverse polarity protection
Ambient temperature range
Operating/Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range
Operating/Storage: 35% to 95% (with no condensation)
Temperature influence
±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence
±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance
50 M min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance (destruction) 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance (destruction)
500 m/s2 10 times each in X, Y,
and Z directions
Degree of protection
Pre-wired Models, Pre-wired Connector Models: IEC 60529: IP67, JIS C 0920 Annex 1: IP67G
Connector Models: IEC 60529: IP67
Connection method
Pre-wired Models (Standard cable length: 2 m) and Pre-wired Connector Models (Standard cable length: 0.3 m), M12 Connector Models
Weight *3
(packed
state)
Materials
Pre-wired
Models
Approx. 85 g
Approx. 95 g
Approx. 180 g
Approx. 260 g
M12 Pre-wired
Smartclick
Connector
Approx. 55 g
Approx. 70 g
Approx. 115 g
Approx. 200 g
Connector
Approx. 40 g
Approx. 55 g
Approx. 95 g
Approx. 180 g
Case
Fluororesin coating (Base material: brass)
Sensing surface
Fluorine resin
Clamping nuts
Fluororesin coating (Base material: brass)
Toothed
washers
Zinc-plated iron
Cable
Main IO-Link functions *2
IO-Link
Communic
ation
specificati
ons *2
Accessories
1,000 m/s2 10 times each in X, Y, and Z directions
Vinyl chloride (PVC)
Operation mode switching between NO and NC, sensor internals failure alert, excessive target proximity alarm selection, control
output timer function selection (ON delay, OFF delay, One shot options), instability detection alarm with ON delay timer selection,
monitor output strength, operating hours read-out, readout of the sensor internal temperature, and factory reset
IO-Link
specification
Ver 1.1
Baud rate
COM2 (38.4 kbps), COM3 (230.4 kbps)
Data length
PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)
Minimum cycle
time
COM2: 2.3 ms, COM3: 0.4 ms
Instruction manual, Clamping nuts, Toothed washer
*1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
*2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
*3. Weight of the standard body-sized model.
27
E2E/E2EQ NEXT Series
BASIC Model
E2E NEXT Series (Double/Single distance model)
DC 3-wire
Shielded
Types
Item
M8
Model
E2E-X2
□8
M12
□12
E2E-X4
Single distance
M18
E2E-X8
□18
M30
E2E-X15
M8
□30
□8
E2E-X1R5
M12
E2E-X2
□12
M18
E2E-X5
M30
□18
□30
E2E-X10
Sensing distance
2 mm±10%
4 mm±10%
8 mm±10%
15 mm±10%
1.5 mm±10%
2 mm±10%
5 mm±10%
10 mm±10%
Setting distance
0 to 1.6 mm
0 to 3.2 mm
0 to 6.4 mm
0 to 12 mm
0 to 1.2 mm
0 to 1.6 mm
0 to 4 mm
0 to 8 mm
Differential travel
15% max. of sensing distance
Detectable object
Ferrous metals (For non-ferrous metals, refer to the Engineering Data on page 34.)
Standard sensing
object
Iron,
8 × 8 × 1 mm
Iron,
Iron,
Iron,
Iron,
12 × 12 × 1 mm 24 × 24 × 1 mm 45 × 45 × 1 mm 8 × 8 × 1 mm
Iron,
Iron,
Iron,
12 × 12 × 1 mm 18 × 18 × 1 mm 30 × 30 × 1 mm
Response frequency
*1
1,500 Hz
1,000 Hz
1,500 Hz
Power supply voltage
10 to 30 VDC (including 10% ripple (p-p)), Class 2
Current consumption
1-output models: 16 mA max.
2-output models: 20 mA max.
Output configuration
B
C
Operation mode
(with sensing object
approaching)
1-output models (B1, C1): NO (Normally open),
1-output models (B2, C2): NC (Normally closed),
2-output models (B3, C3): NO+NC (Normally open, Normally closed) *3
10% max. of sensing distance
500 Hz
250 Hz
2,000 Hz
600 Hz
400 Hz
□ Models: PNP open collector
□ Models: NPN open collector
Load
current
1-output models:
10 to 30 VDC,
Class 2, 200 mA
max., (-40 to
70°C), 100 mA
max., (70 to 85°C)
2-output models:
10 to 30 VDC,
Class 2, 50 mA
max.
Residual
voltage
1-output models:
2 V max. (Load
current: 200 mA,
Cable length: 2 m),
2-output models:
2 V max. (Load
current: 50 mA,
Cable length: 2 m)
Control
output
1-output models:
10 to 30 VDC, Class 2, 200 mA max.,
2-output models:
10 to 30 VDC, Class 2, 100 mA max.
1-output models:
10 to 30 VDC,
Class 2, 200 mA
max., (-40 to
70°C), 100 mA
max., (70 to 85°C)
2-output models:
10 to 30 VDC,
Class 2, 50 mA
max.
1-output models:
10 to 30 VDC, Class 2, 200 mA max.,
2-output models:
10 to 30 VDC, Class 2, 100 mA max.
1-output models:
2 V max. (Load current: 200 mA, Cable length: 2
m),
2-output models:
2 V max. (Load current: 100 mA, Cable length: 2
m)
1-output models:
2 V max. (Load
current: 200 mA,
Cable length: 2 m),
2-output models:
2 V max. (Load
current: 50 mA,
Cable length: 2 m)
1-output models:
2 V max. (Load current: 200 mA, Cable length: 2
m),
2-output models:
2 V max. (Load current: 100 mA, Cable length: 2
m)
Indicator *2
In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and communication indicator (green, not lit)
In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals)
Protection circuits
Power supply reverse polarity protection, Surge suppressor, Output short-circuit protection, Output reverse polarity protection
Ambient temperature
range
Operating/Storage: -40 to 85°C (with no icing or condensation)
Note: The UL temperature rating for M12 Pre-wired Connector Models is -25 to 70°C.
Ambient humidity
range
Operating/Storage: 35% to 95% (with no condensation)
Temperature
influence
±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C
±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence
±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance
50 M min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance
(destruction)
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
(destruction)
500 m/s2 10 times
each in X, Y, and
Z directions
Degree of protection
Pre-wired Models, Pre-wired Connector Models: IEC 60529:IP67, ISO 20653 (old standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex
1: IP67G, Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K 2241:2000; Temperature:
35°C max.)
Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART9): IP69K
Connection method
Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard cable length: 0.3 m) and Connector
Models (M12 Connector, M8 (4-pin) Connector and M8 (3-pin) Connector)
Pre-wired
M12
Weight *5
Pre-wired
(packed
Smartclick
state)
Connector
Connector
28
Double distance
Size
1,000 m/s2 10 times each in X, Y, and Z
directions
500 m/s2 10 times
each in X, Y, and
Z directions
1,000 m/s2 10 times each in X, Y, and Z
directions
Approx. 85 g
Approx. 95 g
Approx. 170 g
Approx. 240 g
Approx. 85 g
Approx. 95 g
Approx. 170 g
Approx. 240 g
Approx. 55 g
Approx. 70 g
Approx. 105 g
Approx. 170 g
Approx. 55 g
Approx. 70 g
Approx. 105 g
Approx. 170 g
Approx. 40 g *6
Approx. 55 g
Approx. 85 g
Approx. 160 g
Approx. 40 g *6
Approx. 55 g
Approx. 85 g
Approx. 160 g
E2E/E2EQ NEXT Series
Types
Item
Materials
M8
Model
E2E-X2
M12
□8
E2E-X4
□12
Case
Stainless
(SUS303)
Sensing
surface
Polybutylene terephthalat (PBT)
Clamping
nuts
Nickel-plated brass
Toothed
washers
Zinc-plated iron
Cable
Main IO-Link
functions *2
IO-Link
Commun
ication
specifica
tions *2
Double distance
Size
Single distance
M18
E2E-X8
□18
M30
□30
E2E-X15
Nickel-plated brass
M8
□8
E2E-X1R5
Stainless
(SUS303)
M12
E2E-X2
□12
M18
E2E-X5
□18
M30
E2E-X10
□30
Nickel-plated brass
Vinyl chloride (PVC)
Operation mode switching between NO and NC, sensor internals failure alert, excessive target proximity alarm selection, control output
timer function selection (ON delay, OFF delay, One shot options), instability detection alarm with ON delay timer selection, monitor
output strength, operating hours read-out, readout of the sensor internal temperature, and factory reset
IO-Link
Ver1.1
specification
Baud rate
COM2 (38.4 kbps), COM3 (230.4 kbps)
Data
length
PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)
Minimum
cycle time
COM2: 2.3 ms, COM3: 0.4 ms
Accessories
Instruction manual, Clamping nuts, Toothed washer
*1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
*2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
*3. Dual-output specification for the M8-size models is only applicable to long-size M12 Connector models.
*4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards. 2-year oil resistance indicates the
median value of the product design and the oil-resistance performance criterion result (=Typical value). Actual performance can be expected
to decline after two years on average from shipment. The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round
Oil-resistant Connectors XS5 NEXT series correctly. The degree of protection is not satisfied with the part where cable wires are uncovered
for the Pre-wired Models.
*5. Weight of the standard body-sized model.
*6. Both M8 connectors and M12 connectors are available.
29
E2E/E2EQ NEXT Series
BASIC Model
E2E NEXT Series (Double/Single distance model)
DC 3-wire
Unshielded
Types
Double distance model
Size
Item
Model
E2E-X4M
□8
M12
□12
M18
Single distance model
□18
M30
M8
□30
E2E-X8M
E2E-X16M
E2E-X30M
E2E-X2M
□8
M12
E2E-X5M
□12
M18
□18
M30
□30
E2E-X10M
E2E-X18M
Sensing distance
4 mm±10%
8 mm±10%
16 mm±10%
30 mm±10%
2 mm±10%
5 mm±10%
10 mm±10%
18 mm±10%
Setting distance
0 to 3.2 mm
0 to 6.4 mm
0 to 12.8 mm
0 to 24 mm
0 to 1.6 mm
0 to 4 mm
0 to 8 mm
0 to 14.4 mm
Differential travel
15% max. of sensing distance
Detectable object
Ferrous metals (For non-ferrous metals, refer to the Engineering Data on page 34.)
Standard sensing
object
Iron,
12 × 12 × 1 mm
Iron,
Iron,
Iron,
Iron,
24 × 24 × 1 mm 48 × 48 × 1 mm 90 × 90 × 1 mm 8 × 8 × 1 mm
Iron,
Iron,
Iron,
15 × 15 × 1 mm 30 × 30 × 1 mm 54 × 54 × 1 mm
Response frequency
*1
1,000 Hz
800 Hz
800 Hz
Power supply voltage
10 to 30 VDC (including 10% ripple (p-p)), Class 2
Current consumption
1-output models: 16 mA max.
2-output models: 20 mA max.
Output configuration
B
C
Operation mode
(with sensing object
approaching)
1-output models (B1, C1): NO (Normally open),
1-output models (B2, C3): NC (Normally closed)
2-output models (B3, C3): NO+NC (Normally open, Normally closed) *3
10% max. of sensing distance
400 Hz
100 Hz
1,000 Hz
400 Hz
100 Hz
□ Models: PNP open collector
□ Models: NPN open collector
Load
current
1-output models:
10 to 30 VDC,
Class 2, 200 mA
max., (-40 to
70°C), 100 mA
max., (70 to 85°C)
2-output models:
10 to 30 VDC,
Class 2, 50 mA
max.
Residual
voltage
1-output models:
2 V max. (Load
current: 200 mA,
Cable length: 2 m),
2-output models:
2 V max. (Load
current: 50 mA,
Cable length: 2 m)
Control
output
1-output models:
10 to 30 VDC, Class 2, 200 mA max.,
2-output models:
10 to 30 VDC, Class 2, 100 mA max.
1-output models:
10 to 30 VDC,
Class 2, 200 mA
max., (-40 to
70°C), 100 mA
max., (70 to 85°C)
2-output models:
10 to 30 VDC,
Class 2, 50 mA
max.
1-output models:
10 to 30 VDC, Class 2, 200 mA max.,
2-output models:
10 to 30 VDC, Class 2, 100 mA max.
1-output models:
2 V max. (Load current: 200 mA, Cable length: 2
m),
2-output models:
2 V max. (Load current: 100 mA, Cable length: 2
m)
1-output models:
2 V max. (Load
current: 200 mA,
Cable length: 2 m),
2-output models:
2 V max. (Load
current: 50 mA,
Cable length: 2 m)
1-output models:
2 V max. (under load current of 200 mA with
cable length of 2 m),
2-output models:
2 V max. (under load current of 100 mA with
cable length of 2 m)
Indicator *2
In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and communication indicator (green, not lit)
In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals)
Protection circuits
Power supply reverse polarity protection, Surge suppressor, Output short-circuit protection, Output reverse polarity protection
Ambient temperature
range
Operating/Storage: -40 to 85°C (with no icing or condensation)
Note: The UL temperature rating for M12 Pre-wired Connector Models is -25 to 70°C.
Ambient humidity
range
Operating/Storage: 35% to 95% (with no condensation)
Temperature
influence
±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C
±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence
±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance
50 M min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance
(destruction)
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
(destruction)
500 m/s2 10 times
each in X, Y, and
Z directions
Degree of protection
Pre-wired Models, Pre-wired Connector Models: IEC 60529:IP67, ISO 20653 (old standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex
1: IP67G, Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K 2241:2000; Temperature:
35°C max.)
Connector Models: IEC 60529:IP67, ISO 20653 (old standard: DIN 40050 PART9): IP69K
Connection method
Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard cable length: 0.3 m) and Models (M12 Connector,
M8 (4-pin) Connector and M8 (3-pin) Connector)
Pre-wired
M12
Weight *5
Pre-wired
(packed
Smartclick
state)
Connector
Connector
30
M8
1,000 m/s2 10 times each in X, Y, and Z
directions
500 m/s2 10 times
each in X, Y, and
Z directions
1,000 m/s2 10 times each in X, Y, and Z
directions
Approx. 85 g
Approx. 95 g
Approx. 170 g
Approx. 280 g
Approx. 85 g
Approx. 95 g
Approx. 170 g
Approx. 240 g
Approx. 55 g
Approx. 70 g
Approx. 105 g
Approx. 220 g
Approx. 55 g
Approx. 70 g
Approx. 105 g
Approx. 170 g
Approx. 40 g *6
Approx. 55 g
Approx. 85 g
Approx. 200 g
Approx. 40 g *6
Approx. 55 g
Approx. 85 g
Approx. 160 g
E2E/E2EQ NEXT Series
Types
Double distance model
Size
Item
Materials
Model
E2E-X4M
□8
M12
E2E-X8M
□12
Case
Stainless
(SUS303)
Sensing
surface
Polybutylene terephthalat (PBT)
Clamping
nuts
Nickel-plated brass
Toothed
washers
Zinc-plated iron
Cable
Main IO-Link
functions *2
IO-Link
Commun
ication
specifica
tions *2
M8
M18
Single distance model
□18
E2E-X16M
M30
□30
E2E-X30M
Nickel-plated brass
E2E-X2M
Stainless
(SUS303)
□8
M12
E2E-X5M
□12
M18
□18
E2E-X10M
M30
E2E-X18M
□30
Nickel-plated brass
Vinyl chloride (PVC)
Operation mode switching between NO and NC, sensor internals failure alert, excessive target proximity alarm selection, control output
timer function selection (ON delay, OFF delay, One shot options), instability detection alarm with ON delay timer selection, monitor
output strength, operating hours read-out, readout of the sensor internal temperature, and factory reset
IO-Link
specificati
on
Ver 1.1
Baud rate
COM2 (38.4 kbps), COM3 (230.4 kbps)
Data
length
PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)
Minimum
cycle time
COM2: 2.3 ms, COM3: 0.4 ms
Accessories
M8
Instruction manual, Clamping nuts, Toothed washer
*1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
*2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
*3. Dual-output specification for the M8-size models is only applicable to long-size M12 Connector models.
*4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards. 2-year oil resistance indicates the
median value of the product design and the oil-resistance performance criterion result (=Typical value). Actual performance can be expected
to decline after two years on average from shipment. The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round
Oil-resistant Connectors XS5 NEXT series correctly. The degree of protection is not satisfied with the part where cable wires are uncovered
for the Pre-wired Models.
*5. Weight of the standard body-sized model.
*6. Both M8 connectors and M12 connectors are available.
31
E2E/E2EQ NEXT Series
BASIC Model
E2E Q NEXT Series (Spatter-resistant Double distance/Single distance model)
DC 3-Wire Models
Shielded
Types
Double distance
Size
Item
M12
□8
Model
E2EQ-X2
Single distance
M18
□12
E2EQ-X4
E2EQ18
X8
□□
M30
E2EQ-X15
M8
□30
E2EQ-X1R5
M12
□8
M18
□12
M30
□18
□30
E2EQ-X2
E2EQ-X5
E2EQ-X10
Sensing distance
2 mm±10%
4 mm±10%
8 mm±10%
15 mm±10%
1.5 mm±10%
2 mm±10%
5 mm±10%
10 mm±10%
Setting distance
0 to 1.6 mm
0 to 3.2 mm
0 to 6.4 mm
0 to 12 mm
0 to 1.2 mm
0 to 1.6 mm
0 to 4 mm
0 to 8 mm
Differential travel
15% max. of sensing distance
Detectable object
Ferrous metals (For non-ferrous metals, refer to the Engineering Data on page 34.)
Standard sensing
object
Iron,
8 × 8 × 1 mm
Iron,
Iron,
Iron,
Iron,
12 × 12 × 1 mm 24 × 24 × 1 mm 45 × 45 × 1 mm 8 × 8 × 1 mm
Iron,
Iron,
Iron,
12 × 12 × 1 mm 18 × 18 × 1 mm 30 × 30 × 1 mm
Response frequency
*1
1,500 Hz
1,000 Hz
2,000 Hz
1,500 Hz
Power supply voltage
10 to 30 VDC (including 10% ripple (p-p)), Class 2
Current consumption
1-output models: 16 mA max.
2-output models: 20 mA max.
Output configuration
B
C
Operation mode
(with sensing object
approaching)
1-output models (B1, C1): NO (Normally open),
1-output models (B2, C2): NC (Normally closed)
2-output models (B3, C3): NO+NC (Normally open, Normally closed)
1-output models:
10 to 30 VDC, Class 2, 200 mA max.,
2-output models:
10 to 30 VDC, Class 2, 100 mA max.
1-output models:
2 V max. (Load current: 200 mA, Cable length: 2
m),
2-output models:
2 V max. (Load current: 100 mA, Cable length: 2
m)
10% max. of sensing distance
500 Hz
250 Hz
600 Hz
400 Hz
□ Models: PNP open collector,
□ Models: NPN open collector
Load
current
1-output models:
10 to 30 VDC,
Class 2, 200 mA
max., (-40 to
70°C), 100 mA
max., (70 to 85°C)
2-output models:
10 to 30 VDC,
Class 2, 50 mA
max.
1-output models:
10 to 30 VDC, Class 2, 200 mA max.,
2-output models:
10 to 30 VDC, Class 2, 100 mA max.
1-output models:
10 to 30 VDC,
Class 2, 200 mA
max., (-40 to
70°C), 100 mA
max., (70 to 85°C)
2-output models:
10 to 30 VDC,
Class 2, 50 mA
max.
Residual
voltage
1-output models:
2 V max. (Load
current: 200 mA,
Cable length: 2 m),
2-output models:
2 V max. (Load
current: 50 mA,
Cable length: 2 m)
1-output models:
2 V max. (Load current: 200 mA, Cable length: 2
m),
2-output models:
2 V max. (Load current: 100 mA, Cable length: 2
m)
1-output models:
2 V max. (Load
current: 200 mA,
Cable length: 2 m),
2-output models:
2 V max. (Load
current: 50 mA,
Cable length: 2 m)
Control
output
Indicator *2
In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and communication indicator (green, not lit)
In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals)
Protection circuits
Power supply reverse polarity protection, Surge suppressor, Output short-circuit protection, Output reverse polarity protection
Ambient temperature
range
Operating/Storage: -40 to 85°C (with no icing or condensation)
Note: The UL temperature rating for M12 Pre-wired Connector Models is -25 to 70°C.
Ambient humidity
range
Operating/Storage: 35% to 95% (with no condensation)
Temperature
influence
±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C
±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence
±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance
50 M min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance
(destruction)
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
(destruction)
500 m/s2 10 times
each in X, Y, and
Z directions
Degree of protection
Pre-wired Models, Pre-wired Connector Models: IEC 60529:IP67, JIS C 0920 Annex 1: IP67G
Connector Models: IEC 60529 IP67
Connection method
Pre-wired
32
M8
1,000 m/s2 10 times each in X, Y, and Z
directions
500 m/s2 10 times
each in X, Y, and
Z directions
1,000 m/s2 10 times each in X, Y, and Z
directions
Pre-wired Models (Standard cable length: 2 m) and Pre-wired Connector Models (Standard cable length: 0.3 m), M12 Connector Models
Approx. 85 g
Approx. 95 g
Approx. 170 g
Approx. 240 g
Approx. 85 g
Approx. 95 g
Approx. 170 g
Approx. 240 g
M12
Weight *3
Pre-wired
(packed
Smartclick
state)
Connector
Approx. 55 g
Approx. 70 g
Approx. 105 g
Approx. 170 g
Approx. 55 g
Approx. 70 g
Approx. 105 g
Approx. 170 g
Connector
Approx. 40 g
Approx. 55 g
Approx. 85 g
Approx. 160 g
Approx. 40 g
Approx. 55 g
Approx. 85 g
Approx. 160 g
E2E/E2EQ NEXT Series
Types
Double distance
Size
Item
Materials
Model
M12
□8
M18
□12
E2EQ-X2
E2EQ-X4
E2EQ18
X8
□□
Case
Fluororesin coating
(Base material:
SUS303)
Sensing
surface
Fluorine resin
Clamping
nuts
Fluororesin coating (Base material: brass)
Toothed
washers
Zinc-plated iron
Cable
Main IO-Link
functions *2
IO-Link
Commun
ication
specifica
tions *2
M8
Single distance
M30
E2EQ-X15
M8
□30
Fluororesin coating (Base material: brass)
□8
Fluororesin coating
(Base material:
SUS303)
E2EQ-X2
M18
□12
M30
□18
E2EQ-X5
□30
E2EQ-X10
Fluororesin coating (Base material: brass)
Vinyl chloride (PVC)
Operation mode switching between NO and NC, sensor internals failure alert, excessive target proximity alarm selection, control output
timer function selection (ON delay, OFF delay, One shot options), instability detection alarm with ON delay timer selection, monitor
output strength, operating hours read-out, readout of the sensor internal temperature, and factory reset
IO-Link
specificati
on
Ver1.1
Baud rate
COM2 (38.4 kbps), COM3 (230.4 kbps)
Data
length
PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)
Minimum
cycle time
COM2: 2.3 ms, COM3: 0.4 ms
Accessories
E2EQ-X1R5
M12
Instruction manual, Clamping nuts, Toothed washer
*1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
*2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
*3. Weight of the standard body-sized model.
33
E2E/E2EQ NEXT Series
Engineering Data (Reference Value)
Sensing Area
PREMIUM Model
Shielded
Shielded
30
E2E-X23@30
Y
X
25
20
E2E-X14@18
Distance X (mm)
Triple distance model, Spatter-resistant Triple distance model
Distance X (mm)
Quadruple distance model
30
E2E(Q)-X22@30
25
Y
X
20
E2E(Q)-X12@18
15
15
E2E(Q)-X6@12
E2E-X9@12
10
10
E2E-X4@8
E2E(Q)-X3@8
5
-10
-5
0
Distance X (mm)
Unshielded
-10
-5
0
5
10
15
Distance Y (mm)
Unshielded
50
E2E-X50M@30
45
40
0
-15
5
10
15
Distance Y (mm)
Y
X
E2E-X30M@18
35
Distance X (mm)
0
-15
5
30
45
E2E-X40M@30
40
35
Y
X
30
E2E-X20M@18
25
25
E2E-X16M@12
20
20
15
10
E2E-X10M@12
10
E2E-X6M@8
5
5
0
-30
15
E2E-X8M@8
-20
-10
0
0
-40
10
20
30
Distance Y (mm)
-30
-20
-10
0
10
20 30 40
Distance Y (mm)
BASIC Model
Shielded
Shielded
16
Y
X
14
E2E(Q)-X15@30
12
10
Distance X (mm)
Single distance model, Spatter-resistant Single distance model
Distance X (mm)
Double distance model, Spatter-resistant Double distance model
12
Y
E2E(Q)-X10@30
X
10
8
E2E(Q)-X8@18
E2E(Q)-X5@18
8
6
6
E2E(Q)-X4@12
4
4
2
2
E2E(Q)-X1R5@8
-15
-10
-5
0
5
10 15 20
Distance Y (mm)
Distance X (mm)
Unshielded
-15
-10
-5
0
5
10 15 20
Distance Y (mm)
Unshielded
30
25
0
-20
E2E-X30M@30
Y
X
E2E-X16M@18
20
Distance X (mm)
0
-20
E2E(Q)-X2@12
E2E(Q)-X2@8
18
Y
16
X
E2E-X18M@30
14
12
E2E-X10M@18
10
15
E2E-X8M@12
10
8
E2E-X5M@12
6
E2E-X4M@8
4
E2E-X2M@8
5
2
0
-40
34
-30
-20
-10
0
10
20 30 40
Distance Y (mm)
0
-40
-30
-20
-10
0
10
20 30 40
Distance Y (mm)
E2E/E2EQ NEXT Series
Influence of Sensing Object Size and Material
PREMIUM Model
Shielded
Quadruple distance model
Triple distance model, Spatter-resistant Triple distance model
5
@d
X
Size: M8 E2E(Q)-X3□8
Distance X (mm)
Distance X (mm)
Size: M8 E2E-X4□8
t=1mm
Iron
4
Stainless steel
(SUS304)
3
4.0
@d
3.5
t=1mm
X
Iron
3.0
Stainless steel
(SUS304)
2.5
2.0
Brass
Brass
2
1.5
Aluminum
Aluminum
Copper
Copper
1.0
1
0.5
0
0
5
10
15
20
25
0.0
30
0
5
Side length of sensing object: d (mm)
15
20
25
Size: M12 E2E(Q)-X6□12
Distance X (mm)
Distance X (mm)
Size: M12 E2E-X9□12
10
Side length of sensing object: d (mm)
10
Iron
8
Stainless steel
(SUS304)
8
@d
X
7
t=1mm
Iron
6
Stainless steel
(SUS304)
5
6
4
Brass
4
2
Aluminum
Copper
@d
X
Brass
3
Aluminum
2
Copper
t=1mm
1
0
0
0
10
20
30
40
0
50
10
20
30
Side length of sensing object: d (mm)
16
@d
X
14
Size: M18 E2E(Q)-X12□18
t=1mm
Distance X (mm)
Distance X (mm)
Size: M18 E2E-X14□18
Iron
12
Stainless steel
(SUS304)
10
40
50
Distance Y (mm)
14
@d
X
12
t=1mm
Iron
10
Stainless steel
(SUS304)
8
8
Brass
6
Brass
4
Copper
Aluminum
Copper
4
2
2
0
6
Aluminum
0
10
20
30
40
50
0
60
Side length of sensing object: d (mm)
30
@d
X
20
30
40
50
60
Size: M30 E2E(Q)-X22□30
t=1mm
25
Iron
30
@d
X
t=1mm
25
Iron
20
20
Stainless steel
(SUS304)
15
Stainless steel
(SUS304)
15
Brass
10
Brass
10
Aluminum
Aluminum
Copper
5
0
10
Side length of sensing object: d (mm)
Distance X (mm)
Distance X (mm)
Size: M30 E2E-X23□30
0
0
0
10
20
30
40
50
60
70
80
90
Side length of sensing object: d (mm)
Copper
5
0
10
20
30
40
50
60
70
80
90
Side length of sensing object: d (mm)
35
E2E/E2EQ NEXT Series
PREMIUM Model
Unshielded
Quadruple distance model
Triple distance model
10
@d
Size: M8 E2E-X6M□8
Distance X (mm)
Distance X (mm)
Size: M8 E2E-X8M□8
t=1mm
X
Iron
8
@d
7
t=1mm
X
Iron
6
5
Stainless steel
(SUS304)
6
8
Stainless steel
(SUS304)
4
4
3
Brass
Brass
Aluminum
Aluminum
2
2
Copper
Copper
1
0
0
10
20
30
40
0
50
Side length of sensing object: d (mm)
Distance X (mm)
Distance X (mm)
20
30
40
t=1mm
Iron
16
12
@d
X
t=1mm
Iron
10
8
Stainless steel
(SUS304)
Stainless steel
(SUS304)
12
50
Size: M12 E2E-X10M□12
20
X
10
Side length of sensing object: d (mm)
Size: M12 E2E-X16M□12
@d
0
6
Brass
8
Brass
Aluminum
4
Aluminum
Copper
Copper
4
0
2
0
0
10
20
30
40
50
60
70
0
10
@d
X
30
t=1mm
Iron
25
20
30
40
50
60
Size: M18 E2E-X20M□18
35
Distance X (mm)
Distance X (mm)
Size: M18 E2E-X30M□18
20
Side length of sensing object: d (mm)
Side length of sensing object: d (mm)
25
@d
X
t=1mm
Iron
20
Stainless steel
(SUS304)
15
Stainless steel
(SUS304)
Brass
10
Brass
15
Aluminum
Aluminum
10
Copper
Copper
5
5
0
0
0
10
20
30
40
50
60
70
80
90
0
10
20
Side length of sensing object: d (mm)
60
@d
X
t=1mm
Iron
50
40
40
50
60
70
80
90
Size: M30 E2E-X40M□30
Distance X (mm)
Distance X (mm)
Size: M30 E2E-X50M□30
30
Side length of sensing object: d (mm)
50
@d
X
t=1mm
Iron
40
Stainless steel
(SUS304)
30
Brass
20
Stainless steel
(SUS304)
30
Brass
20
Aluminum
Copper
10
10
Copper
0
0
20
40
60
80
100
120
140
160
Side length of sensing object: d (mm)
36
Aluminum
0
0
20
40
60
80
100
120
Side length of sensing object: d (mm)
E2E/E2EQ NEXT Series
BASIC Model
Shielded
Double distance model, Spatter-resistant Double distance model Single distance model, Spatter-resistant Single distance model
Size: M8 E2E(Q)-X1R5□8
Distance X (mm)
Distance X (mm)
Size: M8 E2E(Q)-X2□8
3.0
@d
t=1mm
X
2.5
Iron
2.5
@d
t=1mm
X
2.0
2.0
Iron
1.5
Stainless steel
(SUS304)
1.5
Stainless steel
(SUS304)
1.0
1.0
Brass
Brass
0.5
Aluminum
0.5
Aluminum
Copper
0
5
10
15
Copper
20
0
25
5
t=1mm
X
20
25
Size: M12 E2E(Q)-X2□12
Distance X (mm)
Distance X (mm)
Size: M12 E2E(Q)-X4□12
@d
15
Side length of sensing object: d (mm)
Side length of sensing object: d (mm)
5
10
Iron
4
Stainless steel
(SUS304)
3.0
@d
X
2.5
t=1mm
Iron
2.0
Stainless steel
(SUS304)
3
1.5
Brass
2
Brass
Aluminum
1.0
Aluminum
Copper
1
0
Copper
0.5
0
5
10
15
20
25
0.0
0
30
5
@d
t=1mm
X
Iron
8
Stainless steel
(SUS304)
6
15
20
25
Size: M18 E2E(Q)-X5□18
Distance X (mm)
Distance X (mm)
Size: M18 E2E(Q)-X8□18
10
10
Side length of sensing object: d (mm)
Side length of sensing object: d (mm)
6
@d
X
t=1mm
Iron
5
Stainless steel
(SUS304)
4
3
Brass
4
Brass
2
Aluminum
Aluminum
Copper
2
Copper
1
0
0
0
10
20
30
40
50
0
10
20
@d
X
t=1mm
16
Iron
Stainless steel
(SUS304)
12
30
40
50
Size: M30 E2E(Q)-X10□30
Distance X (mm)
Distance X (mm)
Size: M30 E2E(Q)-X15□30
20
Side length of sensing object: d (mm)
Side length of sensing object: d (mm)
12
@d
X
t=1mm
Iron
10
Stainless steel
(SUS304)
8
6
Brass
8
4
Brass
Aluminum
Aluminum
4
0
Copper
Copper
2
0
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
Side length of sensing object: d (mm)
Side length of sensing object: d (mm)
37
E2E/E2EQ NEXT Series
BASIC Model
Unshielded
Double distance model
Single distance model
5
@d
X
Size: M8 E2E-X2M□8
Distance X (mm)
Distance X (mm)
Size: M8 E2E-X4M□8
Iron
t=1mm
4
@d
t=1mm
X
2.5
Iron
2.0
Stainless steel
(SUS304)
3
3.0
Stainless steel
(SUS304)
1.5
2
Brass
Brass
1.0
Aluminum
Aluminum
1
Copper
Copper
0.5
0.0
0
0
5
10
15
20
25
0
30
5
@d
X
15
20
25
Size: M12 E2E-X5M□12
Distance X (mm)
Distance X (mm)
Size: M12 E2E-X8M□12
10
10
Side length of sensing object: d (mm)
Side length of sensing object: d (mm)
t=1mm
Iron
8
6
Stainless steel
(SUS304)
4
Brass
6
@d
X
Iron
t=1mm
5
Stainless steel
(SUS304)
4
3
Brass
2
Aluminum
Aluminum
Copper
2
Copper
1
0
0
10
20
30
40
0
50
0
10
Side length of sensing object: d (mm)
@d
X
30
40
50
Size: M18 E2E-X10M□18
Distance X (mm)
Distance X (mm)
Size: M18 E2E-X16M□18
20
20
Side length of sensing object: d (mm)
t=1mm
Iron
16
12
Stainless steel
(SUS304)
8
Brass
12
@d
X
10
t=1mm
Iron
8
Stainless steel
(SUS304)
6
Brass
4
Aluminum
Aluminum
0
Copper
Copper
4
2
0
0
10
20
30
40
50
60
0
70
10
35
@d
X
30
t=1mm
Iron
25
30
40
50
60
Size: M30 E2E-X18M□30
Distance X (mm)
Distance X (mm)
Size: M30 E2E-X30M□30
20
Side length of sensing object: d (mm)
Side length of sensing object: d (mm)
Stainless steel
(SUS304)
25
@d
X
t=1mm
20
Iron
15
20
Stainless steel
(SUS304)
15
10
Brass
Brass
Aluminum
10
Aluminum
Copper
5
Copper
5
0
0
0
10
20
30
40
50
60
70
80
90
Side length of sensing object: d (mm)
38
0
10
20
30
40
50
60
70
80
90
Side length of sensing object: d (mm)
E2E/E2EQ NEXT Series
Monitor Output vs. Sensing Distance
PREMIUM Model
Quadruple distance model
Triple model, Spatter-resistant Triple distance model
Detection level
Detection level
Shielded
Size: M8 E2E-X4□8
250
Size: M8 E2E(Q)-X3□8
@d=12 mm
225
t=1 mm
X
200
Iron
Stainless steel
(SUS304)
175
150
125
250
@d=9 mm
225
t=1 mm
Iron
Stainless steel
(SUS304)
175
150
125
Aluminum
100
100
75
75
50
50
25
25
Aluminum
0
0
0
1
2
3
4
0
5
1
2
3
4
Size: M12 E2E(Q)-X6□12
250
@d=27 mm
225
t=1mm
X
200
175
Iron
Stainless steel
(SUS304)
150
125
Detection level
Detection level
Size: M12 E2E-X9□12
Aluminum
75
50
50
25
25
0
X
200
Iron
150
Stainless steel
(SUS304)
125
Aluminum
150
Stainless steel
(SUS304)
125
Aluminum
75
50
25
25
10.5
14
0
0
17.5
Distance X (mm)
250
t=1 mm
200
X
Iron
175
Stainless steel
(SUS304)
150
12
15
@d=66 mm
225
t=1 mm
X
Iron
200
175
Stainless steel
(SUS304)
125
100
Aluminum
100
75
75
50
50
25
0
0
9
250
150
Aluminum
125
6
Size: M30 E2E(Q)-X22□30
@d=69 mm
225
3
Distance X (mm)
Detection level
Size: M30 E2E-X23□30
X
Iron
175
50
7
10
t=1 mm
200
75
3.5
8
@d=36 mm
225
100
0
6
250
100
0
4
Distance X (mm)
Detection level
Detection level
t=1 mm
175
2
Size: M18 E2E(Q)-X12□18
@d=42 mm
225
Aluminum
0
12
Size: M18 E2E-X14□18
250
Stainless steel
(SUS304)
125
9
X
Iron
175
75
6
t=1 mm
200
100
3
@d=18 mm
225
150
Distance X (mm)
Detection level
250
100
0
5
Distance X (mm)
Distance X (mm)
0
X
200
25
5
10
15
20
25
Distance X (mm)
0
0
4
8
12
16
20
24
28
Distance X (mm)
39
E2E/E2EQ NEXT Series
PREMIUM Model
Unshielded
Quadruple distance model
Triple distance model
250
Size: M8 E2E-X6M□8
Detection level
Detection level
Size: M8 E2E-X8M□8
@d=24 mm
225
t=1 mm
200
X
Iron
175
Stainless steel
(SUS304)
150
125
250
t=1 mm
Iron
175
Stainless steel
(SUS304)
150
125
Aluminum
100
75
75
50
50
25
25
Aluminum
0
0
2
4
6
8
0
10
2
4
6
@d=48 mm
225
t=1 mm
X
200
Iron
Stainless steel
(SUS304)
175
150
Aluminum
125
150
Stainless steel
(SUS304)
125
Aluminum
75
50
25
25
12
16
0
0
20
Distance X (mm)
@d=90 mm
t=1 mm
X
200
Iron
175
150
Stainless steel
(SUS304)
125
Aluminum
125
Aluminum
50
25
0
25
30
0
35
0
Distance X (mm)
t=1 mm
X
200
Iron
175
Stainless steel
(SUS304)
Aluminum
150
125
15
20
250
25
30
@d=120 mm
225
t=1 mm
200
X
Iron
175
150
Stainless steel
(SUS304)
125
Aluminum
100
100
75
75
50
50
25
25
0
0
10
Size: M30 E2E-X40M□30
@d=150 mm
225
5
Distance X (mm)
Detection level
Detection level
Size: M30 E2E-X50M□30
X
Iron
Stainless steel
(SUS304)
25
250
14
@d=60 mm
150
75
20
12
175
50
15
10
t=1 mm
200
75
10
8
225
100
5
6
250
100
0
4
Size: M18 E2E-X20M□18
250
225
2
Distance X (mm)
Detection level
Size: M18 E2E-X30M□18
X
Iron
175
50
8
t=1mm
200
75
4
@d=30 mm
225
100
0
Detection level
250
100
0
10
Size: M12 E2E-X10M□12
250
Detection level
Detection level
Size: M12 E2E-X16M□12
8
Distance X (mm)
Distance X (mm)
0
10
20
30
40
50
60
Distance X (mm)
40
X
200
100
0
@d=18 mm
225
0
8
16
24
32
40
48
Distance X (mm)
E2E/E2EQ NEXT Series
BASIC Model
Shielded
Double distance model, Spatter-resistant Double distance model Single distance model, Spatter-resistant Single distance model
Size: M8 E2E(Q)-X1R5□8
250
Detection level
Detection level
Size: M8 E2E(Q)-X2□8
@d=8 mm
225
t=1 mm
X
200
175
Iron
Stainless steel
(SUS304)
150
250
t=1 mm
175
Iron
Stainless steel
(SUS304)
125
Aluminum
100
100
75
75
50
50
25
25
0
0
0.5
1
1.5
2
2.5
3
3.5
0
X
200
Iron
Aluminum
125
100
100
75
75
50
50
25
25
0
0
0
4
5
6
7
8
Stainless steel
(SUS304)
Aluminum
0.5
1
1.5
2
2.5
@d=24 mm
t=1mm
X
200
Iron
Stainless steel
(SUS304)
150
4
250
@d=18 mm
225
t=1 mm
X
200
175
Iron
150
Stainless steel
(SUS304)
125
125
Aluminum
Aluminum
100
100
75
75
50
50
25
25
0
0
0
2
4
6
8
10
12
14
0
1
2
3
4
5
6
16
250
@d=45 mm
225
t=1 mm
X
200
Iron
175
Stainless steel
(SUS304)
150
8
9
10
Size: M30 E2E(Q)-X10□30
Detection level
Size: M30 E2E(Q)-X15□30
7
Distance X (mm)
Distance X (mm)
Detection level
3.5
Size: M18 E2E(Q)-X5□18
250
175
3
Distance X (mm)
Detection level
Detection level
Size: M18 E2E(Q)-X8□18
X
Iron
Distance X (mm)
225
3
t=1 mm
175
125
3
2.5
200
150
2
2
@d=12 mm
225
150
1
1.5
250
Stainless steel
(SUS304)
0
1
Distance X (mm)
Detection level
@d=12 mm
t=1 mm
175
0.5
Size: M12 E2E(Q)-X2□12
250
225
Aluminum
0
4
Distance X (mm)
Size: M12 E2E(Q)-X4□12
X
200
150
125
Detection level
@d=8 mm
225
250
@d=30 mm
225
t=1mm
X
200
175
Iron
Stainless steel
(SUS304)
150
125
125
Aluminum
100
100
75
75
50
50
25
25
0
0
3
6
9
12
15
18
21
24
27
30
Distance X (mm)
0
0
Aluminum
2
4
6
8
10
12
14
16
18
20
Distance X (mm)
41
E2E/E2EQ NEXT Series
BASIC Model
Unshielded
Double distance model
Single distance model
Size: M8 E2E-X2M□8
250
Detection level
Detection level
Size: M8 E2E-X4M□8
@d=12 mm
225
t=1mm
X
200
175
Iron
Stainless steel
(SUS304)
150
250
@d=8 mm
225
t=1mm
175
Iron
Stainless steel
(SUS304)
150
125
125
100
75
75
50
50
25
25
0
0
0
0
1
2
3
4
Aluminum
100
Aluminum
5
6
7
8
0.5
1
1.5
2
2.5
Distance X (mm)
@d=24 mm
t=1mm
X
200
Iron
175
125
50
50
25
25
4
6
8
10
Stainless steel
(SUS304)
100
0
12
14
0
16
Aluminum
0
1
2
3
4
5
6
@d=48 mm
225
t=1mm
X
200
Iron
175
Stainless steel
(SUS304)
150
10
@d=30 mm
225
t=1mm
200
175
X
Iron
Stainless steel
(SUS304)
125
Aluminum
Aluminum
100
100
75
75
50
50
25
25
0
0
0
4
8
12
16
20
24
28
0
2
4
6
8
32
250
@d=90 mm
225
t=1mm
X
200
Iron
175
Stainless steel
(SUS304)
150
125
t=1mm
200
175
75
75
50
50
25
25
0
30
40
18
20
50
60
Distance X (mm)
0
0
X
Iron
Stainless steel
(SUS304)
125
100
20
16
@d=54 mm
225
150
Aluminum
10
14
250
100
0
12
Size: M30 E2E-X18M□30
Detection level
Size: M30 E2E-X30M□30
10
Distance X (mm)
Distance X (mm)
Detection level
9
250
150
125
42
8
Size: M18 E2E-X10M□18
Detection level
Detection level
250
7
Distance X (mm)
Distance X (mm)
Size: M18 E2E-X16M□18
X
Iron
175
75
2
t=1mm
200
75
0
4
@d=15 mm
225
125
Aluminum
100
250
150
Stainless steel
(SUS304)
150
3.5
Size: M12 E2E-X5M□12
250
225
3
Distance X (mm)
Detection level
Detection level
Size: M12 E2E-X8M□12
X
200
Aluminum
3
6
9
12 15 18 21 24 27 30 33 36
Distance X (mm)
E2E/E2EQ NEXT Series
I/O Circuit Diagrams/Timing charts
DC 3-Wire
PNP output
Output circuit
Operation mode
Model
IO-Link Communication mode (COM mode)
When using the Sensor connected to IOLink Master Unit
Standard I/O mode (SIO mode)
When using as a general
DC10 to 30V
Brown (1)
+V
E2E(Q)-□B1
NO
Proximity
sensor
main
circuit
Black (4)
OUT
Brown (1)
Proximity
sensor
main
circuit
Black (4)
Load
Blue (3)
Blue (3)
L+ (1)
C/Q (4)
L- (3)
0V
IO-Link master
DC10 to 30V
Brown (1)
+V
E2E(Q)-□B2
NC
Proximity
sensor
main
circuit
Black (2)
---
OUT
Load
Blue (3)
0V
Note: M8 (3-pin) Connector: (1)(4)(3)
DC10 to 30V
DC10 to 30V
Brown (1)
Brown (1)
L+ (1)
+V
E2E(Q)-□B3
NO+NC
Black (4)
Black (4)
Proximity
sensor
main
circuit
OUT1
Load
C/Q (4)
Proximity
sensor
main
circuit
White (3)
White (3)
OUT2
OUT2
Load
DI (2)
Blue (3)
L- (3)
Blue (3)
0V
IO-Link master
Connector Pin Arrangement
M12 Connector
M12 Smartclick Connector
M8 (4-pin) Connector
1
2 4
4
2
M8 (3-pin) Connector
1
4
3
1
3
3
43
E2E/E2EQ NEXT Series
PNP output
Nonsensing
area
Excessive proximity judgment distance *7
Unstable Set position
Sensing Stable
area
Sensing area
ProximitySensor
Output mode
Operation
mode *1
Sensing
object
Rated Sensing distance
(%)
100 80
20
0
ON
OFF
ON
OFF
ON
OFF
NO
Standard
I/O mode
(SIO mode) *2
ON
OFF
ON
OFF
ON
OFF
NC
ON
OFF
ON
OFF
ON
OFF
ON
OFF
NO+NC
Comunication indicator (green) : Always OFF
Operation indicator (orange)
Control output *3
Comunication indicator (green) : Always OFF
Operation indicator (orange)
Control output *3
ON delay
Comunication indicator (green) : Always OFF
Operation indicator (orange)
NO
*5
*4
Control output 1 *3
Control output 2 *3
Operation indicator (orange)
Control output (PD1_bit0) *3
Instability detection *6 (PD1_bit4)
Excessive proximity detection (PD1_bit5)
Flashing Comunication indicator (green)
(1sec cycle)
IO-Link
Communication
mode
(COM mode)
NC
*5
*4
ON
OFF
1
0
1
0
1
0
Operation indicator (orange)
Control output (PD1_bit0) *3
Instability detection *6 (PD1_bit4)
Excessive proximity detection (PD1_bit5)
Flashing
(1sec cycle) Comunication indicator (green)
NO+NC
*5
*4
ON
OFF
1
0
1
0
1
0
1
0
Sensing Present
object
Not
present
ON
OFF
ON
NC
OFF
NO
Flashing
(1sec cycle) Comunication indicator (green)
ON
OFF
1
0
1
0
1
0
*3. The timer function of the control
output can be set up by the IO-Link
communications. (It is able to select
ON delay, OFF delay, or one-shot
function and select a timer time of 1
to 16,383ms (T).)
Operation indicator (orange)
Control output1 (PD1_bit0) *3
Control output2 (PD1_bit1) *3
Instability detection *6 (PD1_bit4)
Excessive proximity detection (PD1_bit5)
OFF delay
Sensing Present
object
Not
present
T
1
0
1
0
ON 1
OFF 0
ON 1
NC
OFF 0
T
One shot
Sensing Present
object
Not
present
ON 1
OFF 0
ON 1
NC
OFF 0
T
NO
T
*4. The excessive target proximity
diagnosis function can be selected
by the IO-Link communications.
*5. The instability detection diagnosis
can be selected by the IO-Link
communications.
*6. The judgment time for the instability
detection diagnosis can be selected
by the IO-Link communications.
(For the ON delay timer function, the
setting can be selected from 0
(invalid), 10, 50, 100, 300, 500, or
1000 ms.)
*7. The judgment distance of the
excessive target proximity diagnosis
function can be selected by the IOLink communications.
(The distance can be selected as a
combination of the material of the
object detected, such as iron,
aluminum, or SUS and the sensing
distance of approximately 10, 20, or
30%. However, it is not allowed to
select a combination of aluminum
and 30%.)
Please contact your OMRON sales
representative regarding the IO-Link
setup file (IODD file).
Please contact your OMRON sales representative regarding assignment of data.
*1. For models with IO-Link, the operation mode can be changed by the IO-Link communications.
*2. If using a model with IO-Link as a general sensor or using a model without IO-Link, it operates in the standard I/O mode (SIO mode).
44
T
NO
T
E2E/E2EQ NEXT Series
NPN output
Operation mode
Model
Output circuit
DC10 to 30V
Brown (1)
+V
Load
E2E(Q)-□C1
NO
Proximity
sensor
main
circuit
OUT
Black (4)
Blue (3)
0V
DC10 to 30V
Brown (1)
+V
Load
Proximity
sensor
main
circuit
E2E(Q)-□C2
NC
OUT
Black (2)
Blue (3)
0V
Note: M8 (3-pin) Connector: (1)(4)(3)
Brown (1)
DC10 to 30V
+V
Load
E2E(Q)-□C3
NO+NC
Proximity
sensor
main
circuit
Black (4)
Load
OUT2
White (3)
Blue (3)
0V
Connector Pin Arrangement
M12 Connector
M12 Smartclick Connector
M8 (4-pin) Connector
1
2 4
4
2
M8 (3-pin) Connector
4
3
1
1
3
3
Nonsensing
area
Stable
sensing area
ProximitySensor
Operation mode
Sensing
object
Rated Sensing distance
(%)
NO
NC
NO+NC
100
0
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Operation indicator (orange)
Control output
Operation indicator (orange)
Control output
Operation indicator (orange)
Control output 1
Control output 2
45
E2E/E2EQ NEXT Series
Connections for Sensor I/O Connectors
DC 3-Wire
Proximity Sensor
Types
Output
Sensor I/O Connectors
Operation
mode
Model
Model
Connections *
E2E/E2EQ NEXT Series
□B1□- M1TJ/
*
E2E(Q)-X
M1
Main
circuit
NO
1
2
2
3
3
4
4
E2E/E2EQ NEXT Series
NO+NC
DC 3-Wire
(M12 Connector/
M12 Smartclick
Connector)
NO
Main
circuit
□ □
□□
□ □
□□
XS5F-D421- 80-X
XS5F-D42 - 80-F
-M1TJ/M1 XS5W-D421- 81-X
XS5W-D42 - 81-F
□B3□
E2E(Q)-X
Note: For details of the
connector,
refer to XS5 NEXT
Series on page 87
-M1TJ/M1
refer to XS5 Series
on page 94
□C1□
E2E(Q)-X
1
2
2
3
3
4
4
E2E/E2EQ NEXT Series
1
2
2
3
3
4
4
E2E/E2EQ NEXT Series
Brown (+)
White (Output 2)
Blue (-)
Black (Output 1)
XS5
*
1
1
2
2
3
3
4
4
Brown (+)
White (not connected)
Blue (-)
Black (Output)
XS5
*
□C2□-M1TJ/M1
E2E(Q)-X
1
1
2
2
3
3
4
4
Brown (+)
White (Output)
Blue (-)
Black (not connected)
XS5
*
□C3□-M1TJ/M1
Main
circuit
E2E(Q)-X
1
1
2
2
3
3
4
4
E2E/E2EQ NEXT Series
Brown (+)
White (Output 2)
Blue (-)
Black (Output 1)
XS3
*
□B1□-M3
E2E(Q)-X
Main
circuit
NO
XS5
1
E2E/E2EQ NEXT Series
NO+NC
Brown (+)
White (Output)
Blue (-)
Black (not connected)
*
Main
circuit
NC
XS5
1
E2E/E2EQ NEXT Series
NPN
Brown (+)
White (not connected)
Blue (–)
Black (Output)
*
□B2□-M1TJ/M1
E2E(Q)-X
Main
circuit
NC
Main
circuit
PNP
XS5
1
1
1
2
2
3
3
4
4
Brown (+)
White (not connected)
Blue (-)
Black (Output)
PNP
E2E/E2EQ NEXT Series
DC 3-Wire
(M8 Connector,
4-pin)
NO
□C1□-M3
E2E(Q)-X
□
□
XS3W-M8PVC4
XS3F-M8PVC4
Note: For details of the
connector,
refer to XS3W-M8/
XS3F-M8 Series
on page 102.
*
Main
circuit
□B2□-M3
E2E(Q)-X
1
2
2
3
3
4
4
E2E/E2EQ NEXT Series
Brown (+)
White (Output)
Blue (-)
Black (not connected)
XS3
*
Main
circuit
NC
XS3
1
1
1
2
2
3
3
4
4
Brown (+)
White (not connected)
Blue (-)
Black (Output)
NPN
E2E/E2EQ NEXT Series
PNP
NC
DC 3-Wire
(M8 Connector,
3-pin)
NO
NPN
NC
Main
circuit
□B1□-M5
□B2□-M5
E2E(Q)-X
□C1□-M5
E2E(Q)-X
□C2□-M5
E2E(Q)-X
1
2
2
3
3
4
4
E2E/E2EQ NEXT Series
E2E(Q)-X
Brown (+)
White (Output)
Blue (-)
Black (not connected)
XS3
*
□
□
XS3W-M8PVC3
XS3F-M8PVC3
Note: For details of the
connector,
refer to XS3W-M8/
XS3F-M8 Series
on page 102.
Main
circuit
NO
*
□C2□-M3
E2E(Q)-X
1
1
Brown (+)
4
4
Black (Output)
3
3
Blue (-)
E2E/E2EQ NEXT Series
XS3
*
Main
circuit
NC
XS3
1
1
1
Brown (+)
4
4
Black (Output)
3
3
Blue (-)
Note: Different from Proximity Sensor wire colors.
* If the XS5W Series or XS3W Series Connector which has a socket and plug on the cable ends is connected to the Sensor, this part will be a plug.
46
E2E/E2EQ NEXT Series
Safety Precautions
Be sure to read the precautions for all models in the website at: http://www.ia.omron.com/.
Warning Indications
Warning level
WARNING
Precautions
for Safe Use
Precautions
for Correct
Use
Indicates a potentially hazardous situation
which, if not avoided, will result in minor or
moderate injury, or may result in serious
injury or death. Additionally there may be
significant property damage.
Supplementary comments on what to do or
avoid doing, to use the product safely.
Supplementary comments on what to do or
avoid doing, to prevent failure to operate,
malfunction or undesirable effect on product
performance.
Meaning of Product Safety Symbols
General prohibition
Indicates the instructions of unspecified
prohibited action.
Caution, explosion
Indicates the possibility of explosion under
specific conditions.
WARNING
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Otherwise, explosion may result.
Never use the product with an AC power supply.
Precautions for Safe Use
The following precautions must be observed to ensure safe operation.
1. Do not use the product in environments subject to flammable or
explosive gases.
2. Do not attempt to disassemble, repair, or modify the product.
3. Do not use a voltage that exceeds the rated operating voltage
range.
Applying a voltage that is higher than the operating voltage range
may result in explosion or fire.
4. Be sure that the power supply polarity and other wiring is correct.
Incorrect wiring may cause explosion or fire.
5. If the power supply is connected directly without a load, the
internal elements may explode or burn.
6. Be sure to insert a load when connecting the power supply.
Precautions for Correct Use
Do not use the product in any atmosphere or environment that
exceeds the ratings.
Operating Environment
1. Do not install the Sensor in the following locations.
(1) Outdoor locations directly subject to sunlight, rain, snow,
waterdroplets, or oil.
(2) Locations subject to atmospheres with chemical vapors,
inparticular solvents and acids.
(3) Locations subject to corrosive gases.
2. The Sensor may malfunction if used near ultrasonic cleaning
equipment, high-frequency equipment, transceivers, cellular
phones, inverters, or other devices that generate a high-frequency
electric field. Please refer to the Precautions for Correct Use on
the OMRON website (www.ia.omron.com) for typical measures.
3. Laying the Proximity Sensor wiring in the same conduit or duct as
high-voltage wires or power lines may result in incorrect operation
and damage due to induction. Wire the Sensor using a separate
conduit or independent conduit.
4. Never use thinner or other solvents. Otherwise, the Sensor
surface may be dissolved.
5. The following conditions shall be observed if you use the product
under an environment using cutting oil that may affect product’s
life and/or performance.
• Usage under the cutting oil condition designated by the
specification
• Usage under the cutting oil dilution ratio recommended by its
manufacturer
• Usage in oil or water is prohibited
Impact on the product life may differ depending on the oil you use.
Before using the cutting oil, make sure that it should not cause
deterioration or degradation of sealing components.
6. When turning on the power by influence of temperature
environment, an outputmis-pulse sometimes occurs. After the
sensor has passed for 300 msec after turning on, please use in the
stable state.
7. The sensor is adjusted with a high degree of accuracy, so do not
use in the environment with sudden temperature change.
8. Operation check is performed using an OMRON's IO-Link master.
If using an IO-Link master from another company, perform the
operation check in advance.
47
E2E/E2EQ NEXT Series
Design
When the Proximity Sensor is mounted in metal, ensure that the
minimum distances given in the following table are maintained.
Influence of Surrounding Metal
When mounting the Proximity Sensor using a nut, only use the
provided nut. And ensure that the minimum distances given in the
following table are maintained.
When mounting the Proximity Sensor using a nut, only use the
provided nut. Nuts that are supplied along with each Sensor are
different. Refer to Dimensions for details on shapes.
(Unit: mm)
Shielded
Models
Model
□8
E2E-X9□12
E2E-X14□18
E2E-X23□30
E2E(Q)-X3□8
E2E(Q)-X6□12
E2E(Q)-X12□18
E2E(Q)-X22□30
E2E(Q)-X2□8
E2E(Q)-X4□12
E2E(Q)-X8□18
E2E(Q)-X15□30
E2E(Q)-X1R5□8
E2E(Q)-X2□12
E2E(Q)-X5□18
E2E(Q)-X10□30
E2E-X4
(Unit: mm)
Shielded
Type
Model
□8
E2E-X9□12
E2E-X14□18
E2E-X23□30
E2E(Q)-X3□8
E2E(Q)-X6□12
E2E(Q)-X12□18
E2E(Q)-X22□30
E2E(Q)-X2□8
E2E(Q)-X4□12
E2E(Q)-X8□18
E2E(Q)-X15□30
E2E(Q)-X1R5□8
E2E(Q)-X2□12
E2E(Q)-X5□18
E2E(Q)-X10□30
E2E-X4
Quadruple
distance model
Triple distance
model/
Spatter-resistant
Triple distance
model
Double distance
model/
Spatter-resistant
Double distance
model
Single distance
model/
Spatter-resistant
Single distance
model
L
d
D
m
n
3
30
3
12
20
2
40
2
27
30
2
60
2
42
70
2
100
2
69
100
0
20
0
9
18
0
20
0
18
20
0
50
0
36
54
0
70
0
66
90
0
8
0
4.5
12
0
18
0
12
18
0
27
0
24
27
0
45
0
45
45
0
8
0
4.5
12
0
12
0
8
18
0
18
0
20
27
0
30
0
40
45
L
d
D
m
n
Unshielded
Models
Model
□8
12
40
12
24
40
21
70
21
48
80
E2E-X16M□12
Quadruple
distance model
46
130
46
90
110
E2E-X30M□18
60
200
60
150 180
E2E-X50M□30
E2E-X6M□8
10
30
10
18
30
16
50
16
30
50
E2E-X10M□12
Triple distance
model
31
90
31
60
80
E2E-X20M□18
50
170
50
120 140
E2E-X40M□30 *
E2E-X4M□8
9
24
9
8
24
11
40
11
20
40
E2E-X8M□12
Double distance
model
21
70
21
48
70
E2E-X16M□18
40
120
40
90
120
E2E-X30M□30
E2E-X2M□8
6
24
6
8
24
11
40
11
20
36
E2E-X5M□12
Single distance
model
18
55
18
40
54
E2E-X10M□18
25
90
25
70
90
E2E-X18M□30
* If you use the model E2E-X40M□30, the panel thickness (t) is 4 mm
E2E-X8M
or less.
48
Quadruple
distance model
Triple distance
model/
Spatter-resistant
Triple distance
model
Double distance
model/
Spatter-resistant
Double distance
model
Single distance
model/
Spatter-resistant
Single distance
model
I
d
D
m
n
4
30
4
12
20
6
40
6
27
30
7
60
7
42
70
9
100
9
69
100
2
20
2
9
18
4
20
4
18
20
4
50
4
36
54
8
70
8
66
90
0
8
0
4.5
12
2.4
18
2.4
12
18
3.6
27
3.6
24
27
6
45
6
45
45
0
8
0
4.5
12
0
12
0
8
18
0
18
0
20
27
0
30
0
40
45
I
d
D
m
n
Unshielded
Models
Model
□8
15
40
15
24
40
25
70
25
48
80
E2E-X16M□12
Quadruple
distance model
50
130
50
90
110
E2E-X30M□18
65
200
65
150 180
E2E-X50M□30
E2E-X6M□8
13
30
13
18
30
□
12
20
50
20
30
50
E2E-X10M
Triple distance
model
35
90
35
60
80
E2E-X20M□18
55
170
55
120 140
E2E-X40M□30 *
E2E-X4M□8
12
24
12
8
24
15
40
15
20
40
E2E-X8M□12
Double distance
model
25
70
25
48
70
E2E-X16M□18
45
120
45
90
120
E2E-X30M□30
E2E-X2M□8
6
24
6
8
24
□
12
15
40
15
20
36
E2E-X5M
Single distance
model
22
55
22
40
54
E2E-X10M□18
30
90
30
70
90
E2E-X18M□30
* If you use the model E2E-X40M□30, the panel thickness (t) is 4 mm
E2E-X8M
or less.
E2E/E2EQ NEXT Series
Mutual Interference
When installing two or more Proximity Sensors face-to-face or sideby-side, ensure that the minimum distances given in the following
table are maintained.
Mounting
Tightening Force
Do not tighten the nut with excessive force.
A washer must be used with the nut.
Unshielded Models
A
Shielded Models
B
A
Part B Part A
(Unit: mm)
Shielded
Models
Model
□8
E2E-X9□12
E2E-X14□18
E2E-X23□30
E2E(Q)-X3□8
E2E(Q)-X6□12
E2E(Q)-X12□18
E2E(Q)-X22□30
E2E(Q)-X2□8
E2E(Q)-X4□12
E2E(Q)-X8□18
E2E(Q)-X15□30
E2E(Q)-X1R5□8
E2E(Q)-X2□12
E2E(Q)-X5□18
E2E(Q)-X10□30
E2E-X4
Quadruple
distance model
Triple distance
model/
Spatter-resistant
Triple distance
model
Double distance
model/
Spatter-resistant
Double distance
model
Single distance
model/
Spatter-resistant
Single distance
model
Item
A
B
40
20
60
35
90
50
150
90
25
20
40
30
70
45
150
90
20
15
30
20
60
35
110
90
20
15
30
20
50
35
100
70
Unshielded
Models
Model
□8
E2E-X16M□12
E2E-X30M□18
E2E-X50M□30
E2E-X6M□8
E2E-X10M□12
E2E-X20M□18
E2E-X40M□30
E2E-X4M□8
E2E-X8M□12
E2E-X16M□18
E2E-X30M□30
E2E-X2M□8
E2E-X5M□12
E2E-X10M□18
E2E-X18M□30
E2E-X8M
Quadruple
distance model
Triple distance
model
Double distance
model
Single distance
model
Part B Part A
Note: 1. The allowable tightening strength depends on the distance
from the edge of the head, as shown in the following table.
(A is the distance from the edge of the head. B includes the
nut on the head side. If the edge of the nut is in part A, the
tightening torque for part A applies instead.)
2. The following strengths assume washers are being used.
Quadruple distance model, Triple distance model,
Spatter-resistant Triple distance model
Size
M8
M12
M18
M30
Shielded
Part A
Dimension
(mm)
Shielded
9
Unshielded
3
Shielded
16
Unshielded
9
Shielded
16
Unshielded
3
Shielded
23
Unshielded
8
Part B
Torque
Torque
4 N·m
10 N·m
6 N·m
15 N·m
15 N·m
60 N·m
(30 N·m *)
40 N·m
80 N·m
* If using the E2EQ (M18), refer to this torque value.
Double distance model, Single distance model,
Spatter-resistant Triple distance model,
Spatter-resistant Single distance model
Item
Part A
Part B
A
B
80
60
160
120
360
300
700
480
M12
---
---
80
60
M18
---
---
70 N·m
120
100
M30
---
---
180 N·m (100 N·m *)
200
120
* If using the E2EQ (M30), refer to this torque value.
380
300
80
60
Mounting
120
100
200
120
350
300
80
60
120
100
200
110
300
200
Size
M8
Shielded
Dimension
(mm)
Shielded
9
Unshielded
3
Torque
Torque
9 N·m
12 N·m
30 N·m
In the IO-Link mode, the cord between the IO-Link master and sensor
must have a length of 20 m or less.
49
E2E/E2EQ NEXT Series
Dimensions
(Unit: mm)
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.
Sensors
PREMIUM Model
E2E/E2EQ NEXT Series
(Quadruple distance/Triple distance/Spatter-resistant, Triple distance model)
DC 3-Wire
Pre-wired Model/Pre-wired Connector Model
Shielded/Unshielded
Connector Models
(M12 Connector, M8 (4-pin) Connector and M8 (3-pin) Connector)
Shielded/Unshielded
B
B
I
J
F
H
E
A
D
C
D
Indicators
Standard I/O mode (SIO mode):
Operation indicator (orange/ON),
communication indicator (green/OFF)
IO-Link Communication mode (COM mode):
Operation indicator (orange/ON),
comunication indicator
(green/Flashing (1sec cycle)
G
I
E
Indicators
Standard I/O mode (SIO mode):
Operation indicator (orange/ON),
comunication indicator (green/OFF)
IO-Link Communication mode (COM mode):
Operation indicator (orange/ON),
comunication indicator
(green/Flashing (1sec cycle)
G
A
C
J
Two clamping nuts
Toothed washer
Pre-wired Models
F
H
Toothed washer
Two clamping nuts
Pre-wired Connector Models (M1TJ)
M12×P1
(Operation mode: NO, NC Type)
Model E2E(Q)-X@8-M1;
Shape of connection.
Shielded
Vinyl-insulated round cable with
3 conductors
M8, M12 size: 4-dia.
M18, M30 size: 6-dia.
(Conductor cross section:
0.2 mm2 (AWG24),
Insulator diameter: 1.05 mm),
Standard length: 2 m
(Operation mode: NO+NC Type)
Vinyl-insulated round cable with
4 conductors
M12 size: 4.3-dia.
M18/M30 size: 6-dia.
(Conductor cross section: 0.2 mm2
(AWG24),
Insulator diameter: 1.05 mm),
Standard length: 2 m
Model
E2E(Q)-X□8-M3/
M5
M8XP1
E2E(Q)-X
M8XP1
(Operation mode: NO+NC Type)
Vinyl-insulated round cable with
4 conductors
M12 size: 4.3-dia.
M18, M30 size: 6-dia.
(Conductor cross section: 0.2 mm2
(AWG24),
Insulator diameter: 1.05 mm),
Standard length: 0.3 m
E2E-X□L8-M3/M5 M8XP1
□8-M1
□8
□12
E2E(Q)-X□18
E2E(Q)-X□30
E2E-X□L8
E2E-X□L12
E2E-X□L18
E2E-X□L30
A
C
D
E
F
G*
H
I
J
M8XP1
37.8
4.4
26
1
10
4
4
15
13
E2E(Q)-X
M12XP1
47.1
3.7
33
1
12
4
5.5
21
17
M18XP1
55.3
8.5
38
1
12
4
6
29
24
M30XP1.5
60.3
8.3
43
1
12
4
7
42
36
M8XP1
47.8
4.4
36
1
10
---
4
15
13
M12XP1
69.1
3.7
55
1
12
---
5.5
21
17
M18XP1
77.3
8.5
60
1
12
---
6
29
24
M30XP1.5
82.3
8.3
65
1
12
---
7
42
36
Unshielded
Model
□M□8
A
M8XP1
E2E-X□M□12 M12XP1
E2E-X□M□L8 M8XP1
B
C
D
E
F
G*
H
I
J
37.8
4.4
26
6
8
---
3
15
13
47.1
3.7
33
7
10
---
4
21
17
E2E-X□M□L12 M12XP1
47.8
4.4
36
6
8
---
3
15
13
69.1
3.7
55
7
10
---
4
21
17
E2E-S05S12□
77.3
8.5
60
13
12
---
4
29
24
M30XP1.5
82.3
8.3
65
15
10
---
5
42
36
M30X1.5
97.3
8.3
80
15
12
---
5
42
36
E2E-X□M□L18 M18XP1
E2E-S05S12□
* Mounting part of sensor lock O-ring (Y92E-J□S□) ---: Out of a subject.
50
F
G*
H
I
J
26
1
10
4
4
15
13
4
15
13
5.5 21
17
10
4
12
4
53 M12XP1 38
1
12
4
6
29
24
58 M12XP1 43
1
12
4
7
42
36
49 M8XP1
36
1
10
---
4
15
13
M8XP1
53 M12XP1 36
1
10
---
4
15
13
M12XP1
70 M12XP1 55
1
12
---
M18XP1
75 M12XP1 60
1
12
---
6
29
24
M30XP1.5
80 M12XP1 65
1
12
---
7
42
36
B
D
E
F
G*
H
I
J
26
6
8
---
3
15
13
5.5 21
17
Unshielded
E2E(Q)-X
E2E-X
E
1
Model
B
39 M8XP1
D
1
E2E(Q)-X□30-M1 M30XP1.5
□L8-M1
E2E-X□L12-M1
E2E-X□L18-M1
E2E-X□L30-M1
C
43 M12XP1 26
E2E(Q)-X□18-M1 M18XP1
E2E-X
B
48 M12XP1 33
E2E(Q)-X□12-M1 M12XP1
Shielded
Model
A
(Operation mode: NO, NC Type)
Vinyl-insulated round cable with
3 conductors
M8, M12 size: 4-dia.
M18, M30 size: 6-dia.
(Conductor cross section:
0.2 mm2 (AWG24),
Insulator diameter: 1.05 mm),
Standard length: 0.3 m
A
C
E2E-X□M□8-M3/
M5
M8XP1
E2E-X□M□12-M1
M8XP1
43 M12XP1 26
6
8
---
3
15
13
M12XP1
48 M12XP1 33
7
10
---
4
21
17
M8XP1
49 M8XP1
36
6
8
---
3
15
13
M8XP1
53 M12XP1 36
6
8
---
3
15
13
70 M12XP1 55
7
10
---
4
21
17
75 M12XP1 60
13 12
---
4
29
24
M30XP1.5
80 M12XP1 65
15 10
---
5
42
36
M30XP1.5
95 M12XP1 80
15 12
---
5
42
36
E2E-X□M□8-M1
E2E-X□M□L8-M3/
M5
E2E-X□M□L8-M1
E2E-X□M□L12-M1 M12XP1
E2E-X□M□L18-M1 M18XP1
E2E-X40M□L30-M1
E2E-X50M□L30-M1
Mounting Hole Dimensions
39 M8XP1
Angle R of the
Bending Wire
Wire pullout position
Sc
10 mm
F
R
Dimensions
F (mm)
Dimensions
M8
8.5 dia.
M12
12.5 dia.
+0.5
0
M18
18.5 dia.
+0.5
0
M18
M30
30.5 dia.
+0.5
0
M30
+0.5
0
M8
M12
R (mm)
12
18
Dimensions
M8
M12
M18
M30
Sc (mm)
- (0)
2.5
E2E/E2EQ NEXT Series
BASIC Model
E2E/E2EQ NEXT Series
(Double distance/Single distance/Spatter-resistant, Double distance/Single distance model)
DC 3-Wire
Connector Models
(M12 Connector, M8 (4-pin) Connector and M8 (3-pin) Connector)
Shielded/Unshielded
Pre-wired Model/Pre-wired Connector Model
Shielded/Unshielded
B
B
D
I
J
F
H
E
A
D
C
Indicators
Standard I/O mode (SIO mode):
Operation indicator (orange/ON),
comunication indicator (green/OFF)
IO-Link Communication mode (COM mode):
Operation indicator (orange/ON),
comunication indicator
(green/Flashing (1sec cycle)
G
I
F
H
E
A
C
J
Two clamping nuts
Toothed washer
Toothed washer
Pre-wired Models
Model E2E(Q)-X@8-M1;
Shape of connection.
Two clamping nuts
Pre-wired Connector Models (M1TJ)
(Operation mode: NO, NC Type)
M12×P1
Shielded
Model
Vinyl-insulated round cable with
3 conductors
M8, M12 size: 4-dia.
M18, M30 size: 6-dia.
(Conductor cross section:
0.2 mm2 (AWG24),
Insulator diameter: 1.05 mm),
Standard length: 2 m
(Operation mode: NO, NC Type)
Vinyl-insulated round cable with
3 conductors
M8, M12 size: 4-dia.
M18, M30 size: 6-dia.
(Conductor cross section:
0.2 mm2 (AWG24),
Insulator diameter: 1.05 mm),
Standard length: 0.3 m
(Operation mode: NO+NC Type)
(Operation mode: NO+NC Type)
Vinyl-insulated round cable with
4 conductors
M12 size: 4.3-dia.
M18, M30 size: 6-dia.
(Conductor cross section: 0.2 mm2
(AWG24),
Insulator diameter: 1.05 mm),
Standard length: 0.3 m
Vinyl-insulated round cable with
4 conductors
M12 size: 4.3-dia.
M18, M30 size: 6-dia.
(Conductor cross section: 0.2 mm2
(AWG24),
Insulator diameter: 1.05 mm),
Standard length: 2 m
E2E(Q)-X□8
E2E(Q)-X□12
E2E(Q)-X□18
E2E(Q)-X□30
E2E-X□L8
E2E-X□L12
E2E-X□L18
E2E-X□L30
A
B
C
D
E
Model
F *1
G *2
H
I
J
M8XP1
37.8 4.4 26 ---
10 (8)
4
3
15 13
M12XP1
47.1 3.7 33 --- 12 (10)
4
4
21 17
M18XP1
55.3 8.5 38 --- 12 (10)
4
4
29 24
M30XP1.5 60.3 8.3 43 --- 12 (10)
4
5
42 36
M8XP1
47.8 4.4 36 ---
8
---
3
15 13
M12XP1
69.1 3.7 55 ---
10
---
4
21 17
M18XP1
77.3 8.5 60 ---
10
---
4
29 24
M30XP1.5 82.3 8.3 65 ---
10
---
5
42 36
E2E-X□M□12
A
B
C
D
M8XP1
37.8 4.4 26
B
C
D
E
M8XP1
39 M8XP1
E2E(Q)-X□8-M1
M8XP1
43 M12XP1 26 ---
E2E(Q)-X□12-M1
M12XP1
48 M12XP1 33 ---
E2E(Q)-X□18-M1
M18XP1
53 M12XP1 38 ---
E2E(Q)-X□30-M1
M30XP1.5 58 M12XP1 43 ---
E2E-X□L8-M3/M5
E2E-X□L8-M1
E2E-X□L12-M1
E2E-X□L18-M1
E2E-X□L30-M1
M8XP1
M8XP1
M12XP1
M18XP1
M30XP1.5
49
53
70
75
80
M8XP1
M12XP1
M12XP1
M12XP1
M12XP1
36
36
55
60
65
Model
A
B
C
D
E2E-X□M□8-M3/M5
E2E-X□M□8-M1
E2E-X□M□12-M1
E2E-X□M□18-M1
E2E-X□M□30-M1
E2E-X□M□L8-M3-M5
E2E-X□M□L8-M1
E2E-X□M□L12-M1
E2EX□M□L18-M1
M8XP1
M8XP1
M12XP1
M18XP1
M30XP1.5
M8XP1
M8XP1
M12XP1
M18XP1
39
43
48
53
58
49
53
70
75
M8XP1
M12XP1
M12XP1
M12XP1
M12XP1
M8XP1
M12XP1
M12XP1
M12XP1
26
26
26
38
43
36
36
55
60
E2E-X□M□L30-M1
M30XP1.5
80 M12XP1 65
26 ---
-----------
F
*1
10
(8)
10
(8)
12
(10)
12
(10)
12
(10)
8
8
10
10
10
G
*2
H
4
3
15 13
4
3
15 13
4
4
21 17
4
4
29 24
4
5
42 36
-----------
3
3
4
4
5
15
15
21
29
42
13
13
17
24
36
H
I
J
3
3
4
4
5
3
3
4
4
15
15
21
29
42
15
15
21
29
13
13
17
24
36
13
13
17
24
5
42 36
I
J
Unshielded
Unshielded
E2E-X□M□8
A
E2E(Q)-X□30
X□8-M3/M5
Shielded
Model
Indicators
Standard I/O mode (SIO mode):
Operation indicator (orange/ON),
comunication indicator (green/OFF)
IO-Link Communication mode (COM mode):
Operation indicator (orange/ON),
comunication indicator
(green/Flashing (1sec cycle)
G
E *3
F
G *2
H
6
8
---
3
I
J
15 13
M12XP1
47.1 3.7 33
7
10
---
4
21 17
E2E-X□M□18
M18XP1
55.3 8.5 38
10
10
---
4
29 24
E2E-X□M□30
M30XP1.5 60.3 8.3 43
13
10
---
5
42 36
F
8
8
10
10
10
8
8
10
10
130
10
(15)
G
*2
---------------------
*1. If using the E2EQ, refer to ( ) dimensions.
*2. Mounting part of sensor lock O-ring (Y92E-J□S□) ---: Out of a subject.
*3. When using X30M□30, refer to (15).
Mounting Hole Dimensions
Angle R of the
Bending Wire
Wire pullout position
Sc
10 mm
E2E-X□M□L8
M8XP1
47.8 4.4 36
6
8
---
3
15 13
E2E-X□M□L12
M12XP1
69.1 3.7 55
7
10
---
4
21 17
E2E-X□M□L18
M18XP1
77.3 8.5 60
10
10
---
4
29 24
Dimensions
E2E-X□M□L30
M30XP1.5 82.3 8.3 65 130 (15) 10
---
5
42 36
M8
8.5 dia.
M12
12.5 dia.
+0.5
0
M18
18.5 dia.
+0.5
0
M18
M30
30.5 dia.
+0.5
0
M30
*1. If using the E2EQ, refer to ( ) dimensions.
*2. Mounting part of sensor lock O-ring (Y92E-J□S□) ---: Out of a subject.
*3. When using X30M□30, refer to (15).
E
*3
6
6
7
10
13
6
6
7
10
F
R
F (mm)
+0.5
0
Dimensions
M8
M12
R (mm)
12
18
Dimensions
M8
M12
M18
M30
Sc (mm)
- (0)
2.5
51
E2E/E2EQ NEXT Series
Accessories (Sold Separately)
e-jig (Mounting Sleeves)
Y92E-J12S18
Y92E-J8S12
35
28
3
18
19 dia.
4
26.8 dia.
21.2 dia.
19
17
3
26.8 dia.
24
24
M12 × 1
Sensor lock nut
Two Mounting Sleeve
Mounting Sleeve
clamping nuts
7
23.3
4
M18 × 1
Sensor lock nut
Two Mounting Sleeve Mounting Sleeve
clamping nuts
M16×1
0.7
8.8
0.7
M20×1
8 dia.
A
A
12 dia.
Section A-A
A
A
Section A-A
Y92E-J18S30
Material
40
23.2
40.8 dia.
36
5
5
40 dia.
36
M30 × 1.5
Sensor lock nut
Two Mounting Sleeve Mounting Sleeve
clamping nuts
11.9
Mounting Sleeve
clamping nut
Polybutylene terephthalate (PBT)
Sensor lock nut
Polybutylene terephthalate (PBT)
Sensor lock O-ring
Material combining HNBR and fluororubber
Torque
M30 × 1.5
Model
Y92E-J8S12
18 dia.
Y92E-J12S18
A
Section A-A
52
Polyetheretherketone (PEEK) /
Polybutylene terephthalate (PBT)
Tightening Force
0.7
A
Mounting Sleeve
Y92E-J18S30
Mounting Sleeve
clamping nut
Sensor lock nut
0.6 N m
0.6 N m
·
1.2 N·m
5 N·m
·
1.2 N·m
3.5 N·m
OMRON AUTOMATION AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • automation.omron.com
OMRON CANADA, INC. • HEAD OFFICE
Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • automation.omron.com
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br
OMRON ELECTRONICS DE MEXICO • HEAD OFFICE
Ciudad de México • 52.55.5901.4300 • 01.800.386.6766 • mela@omron.com
OMRON ARGENTINA • SALES OFFICE
Buenos Aires, Argentina • +54.11.4521.8630 • +54.11.4523.8483
mela@omron.com
OMRON ELECTRONICS DE MEXICO • SALES OFFICE
San Pedro Garza García, N.L. • 81.12.53.7392 • 01.800.386.6766 • mela@omron.
com
OTHER OMRON LATIN AMERICA SALES
+54.11.4521.8630 • +54.11.4523.8483 • mela@omron.com
OMRON ELECTRONICS DE MEXICO • SALES OFFICE
Eugenio Garza Sada,León, Gto • 01.800.386.6766 • mela@omron.com
Controllers & I/O
• Machine Automation Controllers (MAC) • Motion Controllers
• Programmable Logic Controllers (PLC) • Temperature Controllers • Remote I/O
Authorized Distributor:
Robotics
• Industrial Robots • Mobile Robots
Operator Interfaces
• Human Machine Interface (HMI)
Motion & Drives
• Machine Automation Controllers (MAC) • Motion Controllers • Servo Systems
• Frequency Inverters
Vision, Measurement & Identification
• Vision Sensors & Systems • Measurement Sensors • Auto Identification
Systems
Sensing
• Photoelectric Sensors • Fiber-Optic Sensors • Proximity Sensors
• Rotary Encoders • Ultrasonic Sensors
Safety
• Safety Light Curtains • Safety Laser Scanners • Programmable Safety Systems
• Safety Mats and Edges • Safety Door Switches • Emergency Stop Devices
• Safety Switches & Operator Controls • Safety Monitoring/Force-guided Relays
Control Components
• Power Supplies • Timers • Counters • Programmable Relays
• Digital Panel Meters • Monitoring Products
Switches & Relays
• Limit Switches • Pushbutton Switches • Electromechanical Relays
• Solid State Relays
Software
• Programming & Configuration • Runtime
Y56I-E1-01
Note: Specifications are subject to change.
© 2019 Omron. All Rights Reserved.
Printed on recycled paper.
Printed in U.S.A.