E39-R37-CA

Mounting Brackets E39-L Slits/Reflectors E39-S/E39-R CSM_E39-L/E39-S/E39-R_DS_E_19_7 Mounting Brackets [Refer to Dimensions on page 6.] Model Fitting materials Accessories Count E39-L31 Iron, zinc plating 1 E39-L40 Iron, zinc plating 1 E39-L41 Iron, zinc plating E39-L42 Iron, black coating E39-L43 Stainless steel (SUS304) Stainless steel (SUS304) E39-L44 E39-L51 Iron, zinc plating Description Slotted/Phillips screws, M3 × 12 (with spring washers) Material Count Iron, zinc plating 2 Phillips screws M4 × 25 (with spring and plain washers) Iron, zinc plating 2 Nuts M4 Iron, zinc plating 2 Phillips screws M3 × 14 (with spring washers) Plain washer M3 Iron, zinc plating 2 2 Phillips screws M3 × 10 (with spring washers) Plain washer M3 1 1 1 Slotted/Phillips screws M3 × 8 (with spring and plain washers) Slotted/Phillips screws M3 × 8 (with spring and plain washers) Slotted/Phillips screws M4 × 30 (with spring and plain washers) Nuts M4 Applicable sensor (mounting pitch on sensor side) E3C-S50 (8) E3JK 4 Iron, zinc plating 4 Iron, zinc plating 4 Iron, zinc plating 4 Stainless steel (SUS304) 2 Stainless steel (SUS304) 2 Iron, zinc plating Iron, nickel plating 2 5 E3C-1 (10) E3C-2 (20) E3C-DS10 (19) E3C-VS1G (19) E3C-VS3R (19) E3Z pre-wired model (25.4) E3Z pre-wired model (25.4) E3JM (40) 2 E39-L53 Iron, zinc plating 1 --- --- --- E39-L54V Stainless steel (SUS304) 1 --- --- --- E32-T54V --- E32-T24S E32-A03 Iron, zinc plating 2 E3S-C (25.4) Iron, zinc plating 2 E3S-C (25.4) Iron, zinc plating 2 E3S-C (25.4) E39-L83 Stainless steel E39-L85 Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) E39-L86 E39-L87 Note: 1 1 1 1 --Hexagonal bolts M4 × 12 (with spring and plain washers) Hexagonal bolts M4 × 12 (with spring and plain washers) Hexagonal bolts M4 × 12 (with spring and plain washers) Page Dimensions --- 7 E3JM (40) 8 Applicable models that appear shaded come with the Mounting Brackets at left as accessories. 1 E39-L/E39-S/E39-R Fitting materials Model Accessories Count E39-L93FH Stainless steel (SUS304) 1 E39-L93FV Stainless steel (SUS304) 1 E39-L93H Stainless steel (SUS304) 1 E39-L93V Stainless steel (SUS304) 1 E39-L93XY E39-L94 --- Iron, zinc plating --- 2 Description Material Count Holder (upper) Holder (lower) Pipe Bolts M4 × 12 with Hexagonal holes Heat-resistant ABS resin 66 nylon Stainless steel (SUS304) Iron, nickel plating 1 1 1 2 Bolts M4 × 30 with hexagonal holes Iron, nickel plating 1 Phillips screws M3 × 12 (with spring and plain washers) Spring washer M4 Plain washer M4 Nuts M4 Holder Pipe Stainless steel (SUS304) 2 Iron, nickel plating Iron, nickel plating Iron, nickel plating 66 nylon Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Iron, zinc plating Iron, zinc plating 1 1 3 1 1 2 2 4 4 Bolts M5 × 16 with hexagonal holes Nuts M5 Phillips screws M3 × 10 Nuts M3 Applicable sensor (mounting pitch on sensor side) E3Z (25.4) E39-R1/E39-R3 9 E3Z (25.4) E39-R1/E39-R3 E32-T16P (19) E32-T16PR (19) 10 E39-L96 * For installation Stainless steel of Sensor (SUS304) Adjuster E39L93 Stainless steel E39-L98 (SUS304) Stainless steel E39-L102 (SUS304) Stainless steel E39-L103 (SUS304) E39-L104 Stainless steel (SUS304) E39-L116 Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) E39-L117 E39-L118 E39-L119 E39-L120 1 1 1 1 1 Phillips screws M3 × 6 (with spring and plain washers) Slotted/Phillips screws M3 × 12 (with spring and plain washers) Hexagonal bolts M4 × 12 (with spring and plain washers) Hexagonal bolts M4 × 12 (with spring and plain washers) Slotted/Phillips screws M3 × 8 (with spring and plain washers) Iron, nickel plating 2 Stainless steel (SUS304) 2 Iron, zinc plating 2 Iron, zinc plating 2 E3S-C (vertical type) (25.4) 2 E3Z pre-wired model (25.4) E32-R21 (for installation of E39-R3) (25.4) Stainless steel (SUS304) E39-R1 E3Z pre-wired model (25.4) E3S-C (horizontal type) (25.4) 1 Nut plate Stainless steel (SUS304) 1 E3T-S (9/15) 1 Nut plate Stainless steel (SUS304) 1 E3T-S (9/15) 1 Nut plate Stainless steel (SUS304) 1 E3T-S (9/15) 1 --- --- --- E3T-F (8) 1 --- --- --- E3T-F (8) 4 4 4 4 4 4 E3C-S10 (7.5) 11 12 E39-L127-T1 Iron, zinc plating 1 E39-L127-T2 Iron, zinc plating 1 E39-L127-T3 Iron, zinc plating 1 Note: Page Dimensions Phillips screws M2.3 × 8 Spring washer M2.3 Phillips screws M2.3 × 8 Spring washer M2.3 Phillips screws M2.3 × 8 Spring washer M2.3 Iron, zinc plating Iron, zinc plating Iron, zinc plating Iron, zinc plating Iron, zinc plating Iron, zinc plating Applicable models that appear shaded come with the Mounting Brackets at left as accessories. 2 E39-L/E39-S/E39-R Accessories Model Fitting materials E39-L142 Stainless steel (SUS304) 1 Slotted/Phillips screws M3 × 8 (with spring and plain washers) E39-L143 Stainless steel (SUS304) 1 None E39-L144 E39-L148 E39-L149 Stainless steel (SUS304) Stainless steel (SUS304) Iron, black coating Count Description Stainless steel (SUS304) 1 Slotted/Phillips screws M3 × 12 (with spring and plain washers) 1 None 1 None E39-L151 Stainless steel (SUS304) E39-L153 Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) PBT (polybutylene terephthalate) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) E39-L166 E39-L167 E39-L168 E39-L180 E39-L181 E39-L185 E39-L186 1 1 1 1 Stainless steel (SUS304) --- Stainless steel (SUS304) --- Count 2 --- 2 --- --- Holder/bracket E39-L150 Material Shaft (brace) Bolt with hexagonal hole Nut Phillips screw Slotted/Phillips screws Slotted/Phillips screws M3 × 8 (with spring and plain washers) PBT (polybutylene terephthalate) Stainless steel (SUS304) Stainless steel (SUSXM7) Stainless steel (SUS304) Stainless steel (SUSXM7) Stainless steel (SUS304) PBT (polybutylene terephthalate) Stainless steel (SUS304) Stainless steel (SUSXM7) Stainless steel (SUS304) Stainless steel (SUSXM7) Stainless steel (SUS304) Stainless steel (SUSXM7) Stainless steel (SUS304) Nut plate Stainless steel (SUS304) Shaft (brace) Bolt with hexagonal hole Nut Phillips screw Slotted/Phillips screws Holder/bracket Page Dimensions 13 E3X-NA E3Z-G 1 1 1 1 1 2 E3Z (25.4) E3S-R6@/R8@ (20) E39-R3 14 1 1 1 1 1 2 E3Z (25.4) E3S-R6@/R8@ (20) E39-R3 2 E3Z pre-wired model (25.4) 1 E3T-S@@M (13/16) --- --- E3T-FD@@M (8) 15 1 --- 1 1 1 1 1 --- --- E3T-FD@@M Phillips screw Nut plate Phillips screw Nut plate Phillips screw Nut plate Phillips screw Nut plate --- Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel 2 1 2 1 2 1 2 1 ZX1-LD50@ ZX1-LD100@ ZX1-LD300@ ZX1-LD600@ E39-L187 Stainless steel (SUS304) 1 Phillips screw Nut plate Stainless steel Stainless steel 2 1 E39-L188 Stainless steel (SUS304) 1 Phillips screw Nut plate Stainless steel Stainless steel 2 1 E39-L190 Stainless steel (SUS304) 1 Phillips screw Nut plate Stainless steel Stainless steel 2 1 Note: Applicable sensor (mounting pitch on sensor side) E3Z pre-wired model (25.4) E3X-ZV/MZV E3NX-CA E3NX-FA E3NX-MA E3X-DA-S/MDA E3NC-LA E3NC-SA E2CY-SD E9NC-TA E3X-NA E3C-LDA E2C-EDA E4C-UDA E3Z pre-wired model (25.4) 16 E3NC-LH02 E3NC-LH01 E3NC-SH250H E3NC-SH250 E3NC-SH100 E3NC-SH250H E3NC-SH250 E3NC-SH100 17 E3NC-LH03 Applicable models that appear shaded come with the Mounting Brackets at left as accessories. 3 E39-L/E39-S/E39-R Slits E39-S39 E39-S61 E39-S63 E39-S64 E39-S65A E39-S65B E39-S65C E39-S65D E39-S65E E39-S65F Model Slit width Width 1 × 20 mm Width 0.5, 1, 2, 4 × 11 mm 0.5-mm dia., 1 mm 0.5-mm dia., 1 mm 0.5 mm dia. 1-mm dia. 2-mm dia. Width 0.5 × 10 mm Width 1 × 10 mm Width 2 × 10 mm E39-S68 Width 0.5, 1 × 13.4 mm E39-S76A E39-S76B 0.5-mm dia. 1-mm dia. Note: Installation procedure Seal type Applicable type E3JM-10@4 (T)-N E3S-CT@1 E3T-ST1@ E3T-FT1@ Plug-in type E3Z-T@@ Seal type E32-T16P E32-T16PR Plug-in type E3T-ST@M Applicable models that appear shaded come with the Slits at left as accessories Reflectors (Refer to Dimensions on page 18.) Name Item Model Directional angle Ambient operating temperature range Ambient storage temperature range Ambient operating humidity range Ambient storage humidity range Degree of protection Reflectors E39-R1 E39-R1S 30° min. *1 Non-fogging reflective plate E39-R1K Reflectors E39-R2 30° min. *2 Special Reflector for E3ZM-B E39-R6 E39-R10 −25 to 55°C −40 to 70°C E39-RP1 30° min. E39-RSP1 −40 to 60°C −40 to 55°C −25 to 55°C −40 to 70°C 35% to 85% E39-RP37 0 to 40°C 35% to 95% 35% to 85% 35% to 95% 35% to 85% IEC IP67 --- Accessories Phillips screws M3 × 8, spring washers M3, nuts M3 --- *1. 40° or higher for E3JM-R and E3JK-R. *2. 40° or higher for E3G-R. Name Item Model Directional angle Ambient operating temperature range Ambient storage temperature range Ambient operating humidity range Ambient storage humidity range Degree of protection Small reflector E39-R9 E39-R3 E39-R4 E39-RS2 E39-RS2-CA E39-RS3 E39-RS3-CA −25 to 55°C −40 to 70°C 0 to 40°C 35% to 95% 35% to 85% 35% to 95% 35% to 85% --- Name --- IEC IP67 Phillips screws M3 × 8, spring washers M3, nuts M3 --- Laser Reflectors Short-distance transparent object detection Standard Item Model Ambient operating temperature range Ambient storage temperature range Ambient operating humidity range Ambient storage humidity range E39-R37-CA * 30° min. Mounting Brackets E39-L104 (with screws) * Models ending in the suffix “-CA” are reflectors only for E3T-SR4@. Accessories Tape reflector * E39-RS1 E39-RS1-CA E39-R12 E39-R13 E39-R14 Sheets E39-RS4 E39-RS5 −10 to 55°C (No icing) −25 to 70°C (No icing) 35 to 85% (No condensation) 35 to 85% (No condensation) 4 E39-L/E39-S/E39-R Name Laser Reflectors Standard Item Model Ambient operating temperature range Ambient storage temperature range Ambient operating humidity range Ambient storage humidity range E39-R21 * Sheets E39-R22 * E39-RS10 * E39-RS11 * −10 to 55°C (No icing and no condensation) −25 to 70°C (No icing and no condensation) 35 to 85% (No condensation) 35 to 85% (No condensation) * Models only for E3NC-LH03 5 E39-L/E39-S/E39-R (Unit: mm) Mounting Bracket Dimensions Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. E39-L31 E39-L40 Four, R1.6 3.2 R3.2 18±0.1 6 dia. R3.2 17 10.5 22 12 10±0.1 3.2 3.9 4.2 6.4 4 Two, R5 6 6 Material: Iron 1 6.4 9 3.9 3.2 4.2 10.5 Material: Iron 17 42±0.1 7 50 Two, R5 2 5 40±0.1 3.2 12 Two, 4.4 dia. Two, R5 Two, R5.6 Two, R5 R3 8 Two, M3 31.2 6 4.5 dia. max. Pushing out height: 0.6 min. 60 R2.2 R56.6±0.1 21.9 60° 45° 1 R2.2 24 10° 4.4 58 E39-L41 E39-L42 R1.6 5.5 7 3.2 5 R1.6 3.2 11 5 3.2 R1.6 11.5 10 23 27 10±0.1 15.5 4.5 R1.6 3.2 3.2 Material: Iron 17.5 R3 3.2 4.5 3.2 1 Material: Iron 12 3.2 13.5 1 6.5 8 17 15.5 21 2-M3 6 4.5 dia. max. Pushing out height: 0.6 min. 1 6 E39-L/E39-S/E39-R E39-L43 E39-L44 30 1.2 3.5 3.5 R2 7 16.2 8.7 23.2 3.5 1.2 Four, 3.2 dia. 25.4 R3.5 1.2 40 9 R2 Material: Stainless steel (SUS304) 18 R1 6 3.4 3.2 6 ±0.1 R20 13 36 20° 3.4 15 R2 3.2 dia. R25.4±0 Material: Stainless steel (SUS304) 20° 7.5 .1 6 14 5 3.4 E39-L51 31.2 R1 R1 E39-L53 6.5 35.5 Two, 3 dia. 20 R3.2 12 E3A2 12.4 22 E3A-M E3A3 45 6.4 OA-5, OA-5N 6 dia. R3.2 12.4 6.4 18 6 39.5 Material: Iron 37.5 35 1.6 4.5 dia. 4.5 R2.25 Material: Iron 13.5 E3A2, OA-5N 6.5 29.5 20 E3A-M, OA-5 70 E3A3 5 40±0.2 54.5 58 E39-L54V 4.5 8 4.1 Material: Stainless steel (SUS304) 4 23 0.5 15 4.1 7 E39-L/E39-S/E39-R E39-L83 E39-L85 9.8 15.6 4.2 0.4 Six, R1.2 37 32 (44.7) 4.2 1.8 15 8 3.2 3.5 9.2 4.2 4.3 Two, R1.6 11 8 17.6 12.9 Material: Stainless steel (SUS304) R1.6 Material: Stainless steel (SUS304) 3.2 10 2.8 4.2 2.6 16 31 43.8 19 28.9 32.2 15.1 1.5 E39-L86 E39-L87 10 9.2 4.2 25.4 41 20 2.6 4.2 32.2 4.2 10 25 39 4.2 12.4 9.2 Material: Stainless steel (SUS304) 1.5 6.2 4.1 8.2 4.2 12.9 7.2 31 43.8 25.4 31 1.5 12.9 4.2 9.2 4.2 12 20 Material: Stainless steel (SUS304) 4.2 75.6 43.7 2.6 15 8 E39-L/E39-S/E39-R E39-L93FH E39-L93FV 26.3 26.3 20.9 20.9 48 8 E3Z 8 48 E3Z 15° 15° 15° 15° 12 dia. 12 dia. 208 215 188 183 181 176 59 54 30 53 48 6 24 12 Two, 6.6 dia. 35 50 35 Two, 6.6 dia. 50 53 45 26 29 22.5 48 E39-L93H E39-L93V 26.3 26.3 20.9 8 48 20.9 E3Z 8 48 E3Z 15° 15° 15° 12 dia. 12 dia. 216 15° 208 189 184 181 176 59 54 49 44 30 20 10 8 32 34 27 Two, 6.6 dia. 46 Two, 6.6 dia. 15 10 48 24 8 14 32 45 9 E39-L/E39-S/E39-R E39-L94 E39-L93XY 4 Four, R1.6 197 4.8 3.2 165 8 20+0.20 35 22 4 23 38 Pipe (B) 3.2 15 20 1.2 20.9 26.3 3.2 2.3 Two, R1.6 5.8 E3Z 40 Holder (A) 19 ±0.2 170 52 15° 15° 8 Material: Iron 12 dia. 11 3.2 dia. 24 48 E39-L96 Two, M3 Tap processing 4.3 dia. 213 4.6 189 45° 17.5° 60 4.6 17.5° E39-R1 reflector 9.5 (order separately) 29.5 12 dia. Note: The E39-L93XY consists of only the one joint holder (A) and pipe, and the two hexagonal bolts and nuts. It cannot be mounted to the Sensor alone. Material: Stainless steel (SUS304) 2-mm-thick 15.5 Center of pole brace 27 34.5 45° E39-L96 E39-L98 Mounting Holes 30° 30° Two, M6 Two, R28 44±0.2 56 dia. Four, R3.3 E3S-R 8.2 Two, R22 4 6.5 (For E3S-B) (For E3S-R) (For E3Z) An attached screw 61 25.4 16 20 48 38.5 25 16 (A)* 2 56 * Mounting Bracket can be attached to side (A) 8 24 34 Material: Stainless steel (SUS304) 10 E39-L/E39-S/E39-R E39-L102 E39-L103 25.4±0.1 31±0.1 4.2 12 9.2 4.2 Material: Stainless steel (SUS304) 9.2 4.2 4.2 8.3 6.2 6.2 1.5 12 20 1.5 8.3 4.2 9.2 4.2 17.3 9.3 25.4±0.1 Material: Stainless steel (SUS304) 20 12.9 12.9 4.2 9.2 20 12 4.2 31±0.1 43.8 38.2 E39-L104 R1.7 R1.7 3.4 5.8 14° 12.5 (13.7) R20 R1 1.2 Material: Stainless steel (SUS304) R3.5 4.5 6 3.4 29 Two, 3.2 dia. 16 3.5 (39) 37.8 R25.4 3.2 R1 R1.6 10° 11 E39-L/E39-S/E39-R E39-L116 E39-L117 Nut Plate Nut Plate (Four, R2) (Four, R2) (Two, R1.7) 3 3 Three, M2 9 Three, M2 (17.8) 7.5 15 20.5 1.6 4 1.2 (Two, R1.7) 11.2 2.2 11 E39-L118 7 (Two, R2) 5 (Two, R2) Two, R2 2.4 4 (Two, R1.1) 9 9.5 5 9 11.5 15 18 (23) 15 90° (Two, R1.2) 2.4 1.2 R1.5 max. R1 max. 90° (Two, R2) 7 Material: Stainless steel (SUS304) 1.2-mm-thick 15 20.5 Two, 3.4 4.1 31.2 9 10 Material: Stainless steel (SUS304) 1.2-mm-thick 9 Two, 2.2 5 (Two, R1.7) 3.4 5 10 (11.2) 4.5 (Two, R1.1) E39-L119 Nut Plate 1.2 (Four, R2) 11.5 3 Three, M2 90° 10.5 90° 11.5 9 1.2 90° 15 20.5 15 22.7 5 7 2.4 Four, M2 Tap processing 8 4.5 3.2 2.4 (Two, R1.7) 16 12 4 8 9 15 9 9 11.5 15 18 (23) 2.4 7 9 Material: Stainless steel (SUS304) 1.2-mm-thick Two, 2.2 (Two, R1.1) 5 3.4 (Four, R2) E39-L120 Material: Stainless steel (SUS304) 1.2-mm-thick E39-L127-T1 E39-L127-T2 E39-L127-T3 4.2 20 Four, 3.2 dia. (Mounting bracket holes) (5.4) 4 10 14 1.2 22.5 A 12 5.6 1.6 5.6 Four, M2.3 (Mounting sensor screws) Four, M2 Tap processing 8 2.3 3.2 7.5 2.4 15 30 16 12 8 9 2.4 6 Material: Stainless steel (SUS304) 1.2-mm-thick 13.5 Two, 5 dia. Material: Iron 20 A+24 Model Dimension A (mm) E39-L127-T1 10 E39-L127-T2 20 E39-L127-T3 30 12 E39-L/E39-S/E39-R E39-L142 E39-L143 14 8.7 7 22 14 15.8 Four, 3.4-dia. holes (10.3) 34.8 22 16 2.5 3 25.4 37 7.3 5.3 55 R12 26.8 Two, 3.2 dia. 4.5 15.3 14° 3 7 4.5 1.5 3 Four, R1.7 3.4 10.3 10 max. 7 12 5 Material: Stainless steel (SUS304) 16 7 4 4.5 1 3.4 7.8 E39-L144 1 Material: Stainless steel (SUS304) E39-L148 25 16 R1.7 R1.7 Two, R17 Two, 50° 21 23 3.4 12 12 max. 9 2 Four, R1.6 3.4 14.2 3.5 Four, R1.6 9.5 38.5 25.4 Two, R25.4 22 16 7.3 4.3 4 5° Two, 3.2 dia. 7.3 3 1.5 Material: Stainless steel (SUS304) 2 3 1.5 9.1 27 35 Material: Stainless steel (SUS304) 13 E39-L/E39-S/E39-R E39-L149 E39-L150 E39-L151 4.5 Two, 3.5 52 13.6 20 14 5.5 45 Polybutylene terephthalate Four, 4.5 dia. 5.4 35 42.5 6.8 Four, R3 24 5.5 22.7 19 40.5 Two, 3.5 dia. 10 dia. Stainless steel (SUS 304) L 10.5 8 Two, 6.5 dia. 4.5 21 1 34 32 Polybutylene terephthalate 46 Material: Iron E39-L153 19 Length (mm) Model L E39-L150 65 E39-L151 165 14 8 3.5 7 7 4 Two, R1.75 3.5 4-3 Eight, R1.75 4 Four, 3.5 25.4 41 10 1.2 Material: Stainless steel (SUS304) 22 14 E39-L/E39-S/E39-R E39-L166 1.2 13.5 90° 4.5 3.4 2.8 5 11.5 18 23 16 13 Material: Stainless steel (SUS304) 1.2-mm-thick (12.6) Two, R2 3.2 6.5 13.5 13.8 (15) 8 Three, M3 3 16 12.9 10 With Mounting Bracket (Example: E3T-ST11M) 4 12.5 22 8.5 15 Two, M3 × 15 23 13.5 E39-L167 With Mounting Bracket (Example: E3T-FD11M) (6.5) 5 (10.5) 1.5 18 29 Four, M3 Tap processing 3.2 10 17 2.4 Material: Stainless steel (SUS304) 1.5-mm-thick 23.5 17.5 14.5 17.8 13.8 2.4 17 Two, M3×6 15 E39-L/E39-S/E39-R E39-L168 12.6 Material: Polybutylene terephthalate 28.7 4 0.3 14.8 10.8 8.3 (7.3) 10 16 Note: Use this Spacer when mounting the Sensor from the back. E39-L181 E39-L180 Nut plate Nut plate Two, M3 P=0.5 41.3 32.1 11.7 Two, R2 Two, M4 P=0.7 Mounting Brackets Mounting Brackets 52 42.4 15.5 Two, R2 4.8 3.5 dia. 59.1 67.1 4.5 dia. 47.6 53.6 46.1 6.2 62 57 76 6 5.5 4° ° 8 Material: Stainless steel (SUS304) 1.5-mm-thick 20 3.5° 8° 22 12 6.5 3.5 14.8 (21.7) 6.7 Material: Stainless steel (SUS304) 2.0-mm-thick Accessories: Phillips screws (2) (M3 ✕ 30, P=0.5, Stainless) Nut plate (1) 15 E39-L185 4.5 4.5 19.1 (27.6) 9.1 18.5 Material: Stainless steel (SUS304) 2.0-mm-thick Accessories: Phillips screws (2) (M4 ✕ 35, P=0.7, Stainless) Nut plate (1) E39-L186 Mounting Brackets Nut plate 3.5 14° 12 7.5 3.5 Material: Stainless steel (SUS304) 2.0-mm-thick 8 14.5 3.5 Two, M3 through holes Mounting Bracket Nut Plate 3.5 6 14.5 Two, M3 through holes 6 6 R21±0.1 10 10.5 3.5 33 14 23.9 31.4±0.1 16±0.1 16±0.1 15 10° 17.9±0.1 8±0.1 3.5 Two, 3.2 dia. 3.5 3.5 Material: Stainless steel (SUS304) Thickness: 1.5 mm 27±0.1 40.5 29 8±0.1 37.4 Material: Stainless steel (SUS304) Thickness: 1.2 mm Accessories: Phillips screws (2) (M3 ✕ 18, P=0.5, Stainless) Nut plate (1) Material: Stainless steel (SUS304) Thickness: 1.5 mm 10 40 16 18 Material: Stainless steel (SUS304) Thickness: 1.2 mm Accessories: Phillips screws (2) (M3 ✕ 18, P=0.5, Stainless) Nut plate (1) 16 E39-L/E39-S/E39-R E39-L187 E39-L188 Mounting Bracket Mounting Bracket Nut Plate 3.4 7 Two, M3 through holes 13.7 14° Nut Plate 3.5 Two, M3 through holes 6 6 3.5 4 R20 6 4.5 16±0.1 7 Two, 3.2 dia. 4 14 25.4±0.1 25.4±0.1 15 31.4 31.4 4-3 Two, R25.4 Material: Stainless steel (SUS304) Thickness: 1.5 mm 39 4-3.5 25.4 41 Material: Stainless steel (SUS304) Thickness: 1.5 mm 8.8 10° 10 29 Material: Stainless steel (SUS304) Thickness: 1.2 mm Accessories: Phillips screws (2) (M3 ✕ 18, P=0.5, Stainless) Nut plate (1) 22 Material: Stainless steel (SUS304) Thickness: 1.2 mm Accessories: Phillips screws (2) (M3 ✕ 18, P=0.5, Stainless) Nut plate (1) E39-L190 Mounting Bracket Nut Plate 3.5 Four, R1.75 5.5 8±0.1 10.5 6 14.5 3.5 4.5±0.1 11.5 Two, M3 through holes 25.5 19.5±0.1 24 Eight, R1.75 14±0.1 10.5 28 10.5 8.4 8.4 Two, R2 Material: Stainless steel (SUS304) Thickness: 1.5 mm Three, 3.5 dia. 17.5 17.5 16.4 31.5 10.5 8.4 8.4 10.5 20.5±0.1 10.5±0.1 6.5±0.1 16.4 16.4 17.5 16.4 17.5 21.5±0.1 Material: Stainless steel (SUS304) Thickness: 1.2 mm Accessories: Phillips screws (2) (M3 ✕ 18, P=0.5, Stainless) Nut plate (1) 17 E39-L/E39-S/E39-R (Unit: mm) Reflector dimensions Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. E39-R1 E39-R1S E39-R1K * E39-R2 E39-R9 30.9 × 30.9 42.3 (21) 8 4 Material, reflective surface: acrylic Rear surface: ABS Two, 3.5 dia. 40.3 34 7 Material, reflective surface: acrylic Rear surface: ABS 7.5 Four, 3.5 dia. 80.8 74.5 7 Material, reflective surface: acrylic Rear surface: ABS E39-R10 7.5 7 15 25 35.4 3.5 5.5 Two, 3.6 dia. 8 47 × 47 8 59.9 52 61.4 59.9 52 (30.4) 8 10 5 2.7 1.6 * E39-R1K only Coating on reflective surface E39-R3 2.7 7 6.5 1.6 Material, reflective surface: acrylic Rear surface: ABS 34 E39-R4 30 40 51.6 3.5 5.5 Two, 4 dia. 8 E39-R6 13.7 4 2 23 4.9 9.7 19 Material, reflective surface: acrylic Rear surface: ABS 4 Material, reflective surface: acrylic Rear surface: ABS 6 4.5 3.4 29 Material, reflective surface: acrylic Rear surface: ABS 3.4 R20 7 14° 13.7 18.45 22.9 20 16 Two, M3 0.2 13.7 8.7 10.1 3.2 34 1.2 2.6 1.2 10° 13.7 Eight, R1 (1.1) Stainless steel (SUS304) 60 52 40 18.3 23 Two, 3.1 dia. Two, R1.55 Reflector: t0.5 (adhesive tape side) 3.5 Mounting Material: Bracket: t 0.5 Mounting plate: stainless steel (SUS301) Reflective surface: acrylic Note: The reflective plate and mounting plate (1) come as a set. Reflectors only for E3T-SR4@. Retroreflector for E3ZM-B E39-RP1 4.8 Reflector Two, 3.2 dia. R25.4 34.8 38 1.4 40 34 Mounting bracket 23 18.3 10.2 41.8 25.4 Two, 2.2 dia. E39-R37-CA 0.2 11 Adhesive tape side 22.5 19.3 2 3.5 Retroreflector for E3ZM-B E39-RP37 Mounting bracket Reflector 13.7 8.7 13.7 Eight, R1 18.3 23 23 18.3 10.2 8.5 44 Two, 3.1 dia. 3 0.2 (1.5) Two, R1.55 Material: Reflective surface: acrylic Mounting plate: stainless steel (SUS301) Reflector: t0.9 (adhesive tape side) Mounting Bracket: t 0.5 Note: The reflective plate and mounting plate (1) come as a set. Retroreflector for E3ZM-B E39-RSP1 80 Material, reflective surface: acrylic Rear surface: ABS 72 63.6 Acryl Reflector 12 50 0.9 Two, 3.5 dia. 18 E39-L/E39-S/E39-R E39-RS1 E39-RS1-CA *1 E39-RS3 E39-RS3-CA *1 35 0.5 10 Adhesive tape side Four, R1 Material: Acrylics 80 0.5 E39-RS2 E39-RS2-CA *1 70 40 0.5 Material: Acrylics 35 Adhesive tape side Four, R1 Adhesive tape side Four, R1 Material: Acrylics E39-R13 *2 E39-R12/R14 *2 5.5 3 4 ,R ur 2 ,R 7 3. 7 12 a. di 4 o, 3. Tw Tw di .2 R3 4 o, ur Fo 6 23 a. R3 .2 30 1 ,R ur 1.6 R3 15 .7 Fo 23 Fo 45 1.4 r, R Fou 2.9 24 17.2 .7 R3 37 E39-RS4 *2 E39-RS5 *2 0.4 0.4 108 195 22 46 Adhesive tape side Adhesive tape side *1. Models ending in the suffix “-CA” are reflectors only for E3T-SR4@. *2. These Reflectors are for E3C-LDA-series Sensors. However, the E39-R12 can also be used with an E3Z-LR@ Retroreflective Laser Sensor. 19 E39-L/E39-S/E39-R E39-R21 *3 E39-R22 *3 Two, 3.2 dia. 30 2.5 5 Two, 3.2 dia. 5 25 3 55 50 2.5 5 35 5 3 29 25 40 3 24 30 34 3 Material, reflective surface: methacrylic resin (PMMA) Rear surface: Polybutylene terephthalate (PBT) E39-RS10 *3 49 Material, reflective surface: methacrylic resin (PMMA) Rear surface: Polybutylene terephthalate (PBT) E39-RS11 *3 25 0.32 (excluding release paper) 50 0.32 (excluding release paper) 50 25 Material, reflective surface: acrylic Material, reflective surface: acrylic *3. Models only for E3NC-LH03 20 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2021.11 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2021 All Right Reserved.