E39L44

Mounting Brackets E39-L/F39-L Slits/Reflectors E39-S/E39-R CSM_E39-L_F39-L_E39-S_E39-R_DS_E_15_1 Mounting Brackets [Refer to Dimensions on page 5.] Model Fitting materials Accessories Count Description Material Count Applicable sensor (mounting pitch on sensor side) E3S-RS30E4@ (25.4) E3S-R1E4@ (25.4) E39-L2 Iron, zinc plating 1 Hexagonal bolts M4 × 12 (with spring and plain washers) Iron, zinc plating 2 E39-L4 Iron, zinc plating 1 Slotted/Phillips screws M3 × 12 (with spring and plain washers) Iron, zinc plating 2 E32-T16 (20) E39-L6 Iron, zinc plating 1 Iron, zinc plating 2 E3S-RS30E4@ (25.4) E3S-R1E4@ (25.4) E39-L31 Iron, zinc plating 1 Iron, zinc plating 2 E3C-S50 (8) 2 Iron, zinc plating 1 Phillips screws M4 × 25 (with spring and plain washers) Iron, zinc plating E39-L40 Nuts M4 Iron, zinc plating 2 Phillips screws M3 × 14 (with spring washers) Plain washer M3 Iron, zinc plating Iron, zinc plating 4 Phillips screws M3 × 10 (with spring washers) Plain washer M3 Iron, zinc plating 4 Iron, zinc plating 4 Stainless steel (SUS304) 2 Stainless steel (SUS304) 2 E39-L41 E39-L42 E39-L43 E39-L44 E39-L51 Iron, zinc plating Iron, black coating Stainless steel (SUS304) Stainless steel (SUS304) Iron, zinc plating E39-L53 Iron, zinc plating E39-L54V Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) E39-L69 E39-L70 E39-L83 Stainless steel E39-L85 Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) E39-L86 E39-L87 Note: 2 2 1 1 1 1 1 1 1 1 1 1 1 Hexagonal bolts M4 × 12 (with spring and plain washers) Slotted/Phillips screws, M3 × 12 (with spring washers) Slotted/Phillips screws M3 × 8 (with spring and plain washers) Slotted/Phillips screws M3 × 8 (with spring and plain washers) Slotted/Phillips screws M4 × 30 (with spring and plain washers) Nuts M4 Iron, zinc plating Iron, nickel plating 4 2 --- --- --- --- Hexagonal bolts M4 × 12 (with spring and plain washers) Hexagonal bolts M4 × 12 (with spring and plain washers) Hexagonal bolts M4 × 12 (with spring and plain washers) Stainless steel (SUS304) 2 Stainless steel (SUS304) 2 --- E3C-1 (10) E3C-2 (20) E3C-DS10 (19) E3C-VS1G (19) E3C-VS3R (19) E3Z pre-wired model (25.4) E3Z pre-wired model (25.4) 6 E3JM (40) 2 --- --- 5 E3JK --- Slotted/Phillips screws M3 × 12 (with spring and plain washers) Slotted/Phillips screws M3 × 12 (with spring and plain washers) Page Dimensions --- E3JM (40) E32-T54V E3S-R1@ (20) E3S-R3@ (20) E3S-R6@ (20) E3S-R8@ (20) E32-T24S E32-A03 Iron, zinc plating 2 E3S-C (25.4) Iron, zinc plating 2 E3S-C (25.4) Iron, zinc plating 2 E3S-C (25.4) E3S-CR62/67 (25.4) 6 Applicable models that appear shaded come with the Mounting Brackets at left as accessories. 1 E39-L/F39-L/E39-S/E39-R Fitting materials Model Accessories Count E39-L93FH Stainless steel (SUS304) 1 E39-L93FV Stainless steel (SUS304) 1 E39-L93H Stainless steel (SUS304) 1 E39-L93V Stainless steel (SUS304) 1 E39-L93XY E39-L94 --- Iron, zinc plating --- 2 Description Material Count Holder (upper) Holder (lower) Pipe Bolts M4 × 12 with Hexagonal holes Heat-resistant ABS resin 66 nylon Stainless steel (SUS304) Iron, nickel plating 1 1 1 2 Bolts M4 × 30 with hexagonal holes Iron, nickel plating 1 Phillips screws M3 × 12 (with spring and plain washers) Spring washer M4 Plain washer M4 Nuts M4 Holder Pipe Stainless steel (SUS304) 2 Iron, nickel plating Iron, nickel plating Iron, nickel plating 66 nylon Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Iron, zinc plating Iron, zinc plating 1 1 3 1 1 2 2 4 4 Bolts M5 × 16 with hexagonal holes Nuts M5 Phillips screws M3 × 10 Nuts M3 Applicable sensor (mounting pitch on sensor side) E3Z (25.4) E3S-R1@/R3@ /R6@/R8@ (20) E39-R1/E39-R3 Page Dimensions 8 E3Z (25.4) E3S-R1@/R3@ /R6@/R8@ (20) E39-R1/E39-R3 E32-T16P (19) E39-L96 * For installation Stainless steel of Sensor (SUS304) Adjuster E39L93 Stainless steel E39-L97 (SUS304) E39-L98 Stainless steel (SUS304) E39-L102 Stainless steel (SUS304) Stainless steel (SUS304) E39-L103 E39-L104 Stainless steel (SUS304) E39-L109 Stainless steel (SUS430) Stainless steel (SUS430) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) E39-L114 E39-L115 E39-L116 E39-L117 E39-L118 E39-L119 E39-L120 Phillips screws M3 × 6 (with spring and plain washers) Iron, nickel plating 2 E39-R1 1 Slotted/Phillips screws M3 × 12 (with spring and plain washers) Stainless steel (SUS304) 2 E3S-R1@/R3@ (20) 1 Slotted/Phillips screws M3 × 12 (with spring and plain washers) Stainless steel (SUS304) 2 Iron, zinc plating 2 Iron, zinc plating 2 Stainless steel (SUS304) 2 1 1 1 1 Hexagonal bolts M4 × 12 (with spring and plain washers) Hexagonal bolts M4 × 12 (with spring and plain washers) Slotted/Phillips screws M3 × 8 (with spring and plain washers) --- --- E3Z pre-wired model (25.4) E3S-R6@/R8@ (20) E3S-C (horizontal type) (25.4) E3S-C (vertical type) (25.4) E3S-CR62/67 (25.4) E3Z pre-wired model (25.4) E32-R21 (for installation of E39-R3) (25.4) --- E32-S15-@ (13.2) 2 Phillips screws M5 × 10 Iron, zinc plating 4 E3MC (28) 1 Phillips screws M5 × 8 Slotted/Phillips screws M3 × 8 Iron, zinc plating Iron, nickel plating 4 2 E3MC 1 --- --- --- E3T-S (9/15) 1 --- --- --- E3T-S (9/15) 1 --- --- --- E3T-S (9/15) 1 --- --- --- E3T-F (8) 1 --- --- --- E3T-F (8) 4 4 4 4 4 4 E3C-S10 (7.5) 10 11 E39-L127-T1 Iron, zinc plating 1 E39-L127-T2 Iron, zinc plating 1 E39-L127-T3 Iron, zinc plating 1 Note: 9 1 Phillips screws M2.3 × 8 Spring washer M2.3 Phillips screws M2.3 × 8 Spring washer M2.3 Phillips screws M2.3 × 8 Spring washer M2.3 Iron, zinc plating Iron, zinc plating Iron, zinc plating Iron, zinc plating Iron, zinc plating Iron, zinc plating Applicable models that appear shaded come with the Mounting Brackets at left as accessories. 2 E39-L/F39-L/E39-S/E39-R Accessories Model Fitting materials E39-L131 Stainless steel (SUS304) 1 E39-L132 Stainless steel (SUS304) 1 E39-L135 Stainless steel (SUS304) 1 Count Description Slotted/Phillips screws M4 × 25 Spring washer M4 Plain washer M4 Nuts M4 Slotted/Phillips screws M4 × 25 Spring washer M4 Plain washer M4 Nuts M4 Slotted/Phillips screws M4 × 35 Spring washer M4 Plain washer M4 Nuts M4 Slotted/Phillips screws M4 × 35 Spring washer M4 Plain washer M4 Nuts M4 Slotted/Phillips screws M3 × 8 (with spring and plain washers) E39-L136 Stainless steel (SUS304) 1 E39-L142 Stainless steel (SUS304) 1 E39-L143 Stainless steel (SUS304) 1 None E39-L144 Stainless steel (SUS304) Stainless steel (SUS304) Iron, black coating 1 Slotted/Phillips screws M3 × 12 (with spring and plain washers) 1 None 1 None E39-L148 E39-L149 Holder/bracket E39-L150 Stainless steel (SUS304) 1 E39-L151 Stainless steel (SUS304) 1 E39-L153 Stainless steel (SUS304) 1 Note: Shaft (brace) Bolt with hexagonal hole Nut Phillips screw Slotted/Phillips screws Holder/bracket Shaft (brace) Bolt with hexagonal hole Nut Phillips screw Slotted/Phillips screws Slotted/Phillips screws M3 × 8 (with spring and plain washers) Material Count Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) Stainless steel (SUS304) 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Stainless steel (SUS304) 2 --- Stainless steel (SUS304) --- --- 2 --- --PBT (polybutylene terephthalate) Stainless steel (SUS304) Stainless steel (SUSXM7) Stainless steel (SUS304) Stainless steel (SUSXM7) Stainless steel (SUS304) PBT (polybutylene terephthalate) Stainless steel (SUS304) Stainless steel (SUSXM7) Stainless steel (SUS304) Stainless steel (SUSXM7) Stainless steel (SUS304) Stainless steel (SUSXM7) Stainless steel (SUS304) Applicable sensor (mounting pitch on sensor side) Page Dimensions E3G-R1@ (25) E3G-L7@ (25) E3G-R1@ (25) E3G-L7@ (25) E3G-MR19 (T) E3G-ML79 (T) 12 E3G-MR19 (T) E3G-ML79 (T) E3Z pre-wired model (25.4) E3X-DA-S/MDA E3X-NA E3C-LDA E2C-EDA E4C-UDA E3Z pre-wired model (25.4) E3X-NA E3Z-G 1 1 1 1 1 2 E3Z (25.4) E3S-R6@/R8@ (20) E39-R3 13 1 1 1 1 1 2 2 E3Z (25.4) E3S-R6@/R8@ (20) E39-R3 E3Z pre-wired model (25.4) Applicable models that appear shaded come with the Mounting Brackets at left as accessories. 3 E39-L/F39-L/E39-S/E39-R Contact Mounting Plates [Refer to Dimensions on page 13.] Model Material E39-L60 Note: Count Applicable type 1 E3S-R@6 PBT (polybutylene terephthalate) Page Dimensions 13 Applicable models that appear shaded come with the Mounting Brackets at left as accessories. Slits Model Slit width Installation procedure E39-S39 Width 1 × 20 mm Seal type E39-S60 E39-S61 E39-S63 E39-S64 E39-S65A E39-S65B E39-S65C E39-S65D E39-S65E E39-S65F Width 0.5, 1 × 15 mm Width 0.5, 1, 2, 4 × 11 mm 0.5-mm dia., 1 mm 0.5-mm dia., 1 mm 0.5 mm dia. 1-mm dia. 2-mm dia. Width 0.5 × 10 mm Width 1 × 10 mm Width 2 × 10 mm Seal type E39-S68 Width 0.5, 1 × 13.4 mm Note: Applicable type E3JM-10@4 (T)-N E3JK-5@@-N E32-T16 E3S-CT@1 E3T-ST1@ E3T-FT1@ Plug-in type E3Z-T@@ E32-T16P E32-T16PR Seal type Applicable models that appear shaded come with the Slits at left as accessories Reflectors (Refer to Dimensions on page 14.) Name Item Model Directional angle Ambient operating temperature range Ambient storage temperature range Ambient operating humidity range Ambient storage humidity range Degree of protection Accessories Non-fogging reflective plate E39-R1K Reflectors E39-R1 E39-R1S 30° min. *1 Reflectors E39-R2 30° min. *2 E39-R6 E39-R10 30° min. −25 to 55°C −40 to 70°C Special Reflector for E3ZM-B E39-RP1 −40 to 60°C −40 to 55°C −40 to 70°C 35% to 85% 35% to 95% 35% to 85% 35% to 95% IEC IP67 --- *1. 40° or higher for E3JM-R and E3JK-R. *2. 40° or higher for E3G-R. Name Item Model Directional angle Ambient operating temperature range Ambient storage temperature range Ambient operating humidity range Ambient storage humidity range Degree of protection Small reflector E39-R9 E39-R3 E39-R4 E39-R37-CA * E39-RS2 E39-RS2-CA E39-RS3 E39-RS3-CA 30° min. −25 to 55°C −40 to 70°C 0 to 40°C 35% to 95% 35% to 85% 35% to 95% 35% to 85% Mounting BrackAccessories --ets E39-L104 (with screws) * Models ending in the suffix “-CA” are reflectors only for E3T-SR4@. Name --- IEC IP67 Phillips screws M3 × 3, spring washers M3, nuts M3 --- Laser Reflectors Short-distance transparent object detection Standard Item Model Ambient operating temperature range Ambient storage temperature range Ambient operating humidity range Ambient storage humidity range Tape reflector * E39-RS1 E39-RS1-CA E39-R12 E39-R13 E39-R14 Sheets E39-RS4 E39-RS5 −10 to 55°C (No icing) −25 to 70°C (No icing) 35 to 85% (No condensation) 35 to 85% (No condensation) 4 E39-L/F39-L/E39-S/E39-R (Unit: mm) Mounting Bracket Dimensions Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. E39-L2 E39-L4 Four, R1.6 4 5 3.2 20 33 4 3.2 Four, 1.2 R1.6 20 11 2.3 3.2 5.5 92.1 82.1 Material: Iron 20±0.2 10.2 58 20.2 Optical axis Material: Iron 5 41 25.4 Two, 3.2 dia. 4.2 4.2 5.6 2.1R 5 25 Two, M4 slotted, hexagonal bolts 1.6 9 25.4 29.1 E39-L6 E39-L31 Four, R1.6 6.5 25.4 3.2 4.2 17 12 10.5 20 5 3.2 3.9 4.2 5 4.2 5 1.6 Material: Iron 6 6 4.2 (R2.1) Material: Iron 4.2 12 5 20 1 10.5 17 3.2 6.5 25.4 39 3.9 3.2 4.2 12 R3 8 Two, M3 6 4.5 dia. max. Pushing out height: 0.6 min. 1 E39-L40 R3.2 6 dia. 18±0.1 R3.2 12 22 10±0.1 6.4 4 Two, R5 Material: Iron 6.4 9 2 42±0.1 7 50 Two, R5 5 40±0.1 Two, 4.4 dia. Two, R5 Two, R5.6 Two, R5 R56.6±0.1 60 R2.2 31.2 21.9 60° 45° 10° R2.2 24 4.4 58 5 E39-L/F39-L/E39-S/E39-R E39-L41 E39-L42 R1.6 5.5 7 5 3.2 R1.6 3.2 11 6.5 8 13.5 1 R1.6 23 27 3.2 1 Material: Iron 11.5 10 10±0.1 4.5 15.5 3.2 R1.6 3.2 Material: Iron 17.5 R3 3.2 4.5 5 3.2 12 3.2 17 15.5 21 2-M3 6 4.5 dia. max. Pushing out height: 0.6 min. 1 E39-L43 E39-L44 30 1.2 3.5 3.5 R2 7 16.2 8.7 23.2 3.5 1.2 Four, 3.2 dia. 25.4 R3.5 1.2 40 9 R2 Material: Stainless steel (SUS304) 18 R1 6 3.4 3.2 6 ±0.1 R20 13 36 20° 3.4 15 R2 3.2 dia. R25.4±0 Material: Stainless steel (SUS304) 20° 7.5 .1 6 14 5 3.4 E39-L51 31.2 R1 R1 E39-L53 6.5 35.5 Two, 3 dia. 20 R3.2 12 E3A2 12.4 22 E3A-M E3A3 45 6.4 OA-5, OA-5N 6 dia. R3.2 12.4 6.4 18 6 39.5 Material: Iron 37.5 35 1.6 4.5 dia. 4.5 R2.25 Material: Iron 13.5 E3A2, OA-5N 6.5 29.5 20 E3A-M, OA-5 70 E3A3 40±0.2 5 54.5 58 E39-L54V E39-L69 3.2 5 4.5 20±0.2 3.110.7 16.5 8 7.2 4.1 Material: Stainless steel (SUS304) 4 23 1.2 15 7.2 3.1 3.2 3.1 7.2 7.2 3.1 10.7 Material: Stainless steel (SUS304) 0.5 4.1 5 16.5 20±0.2 30 6 E39-L/F39-L/E39-S/E39-R E39-L70 E39-L83 20±0.2 16.3 16.3 20±0.2 0.4 3.1 10.7 7.2 3.2 3.1 2.05 4.3 Two, R1.6 3.1 7.2 1.8 16.5 3.5 Material: Stainless steel (SUS304) Six, R1.2 11 17.6 7.2 R1.6 2.05 3.1 1.2 Material: Stainless steel 2.05 31.7±0.1 11.4 3.1 7.2 7.2 3.2 10 2.8 16.5 10.7 41.7 E39-L85 9.8 E39-L86 15.6 4.2 20 2.6 37 32 (44.7) 4.2 15 8 32.2 9.2 4.2 39 4.2 8 9.2 12.9 Material: Stainless steel (SUS304) 4.2 2.6 16 31 43.8 Material: Stainless steel (SUS304) 4.2 12.9 31 43.8 31 1.5 19 12.9 4.2 9.2 4.2 12 20 28.9 32.2 15.1 1.5 E39-L87 10 9.2 4.2 25.4 41 4.2 4.2 10 25 12.4 1.5 6.2 4.1 8.2 7.2 25.4 Material: Stainless steel (SUS304) 4.2 75.6 43.7 2.6 15 7 E39-L/F39-L/E39-S/E39-R E39-L93FH E39-L93FV 26.3 26.3 20.9 20.9 48 8 E3Z 8 48 E3Z 15° 15° 15° 15° 12 dia. 12 dia. 208 215 188 183 181 176 59 54 30 53 48 6 24 12 Two, 6.6 dia. 35 50 35 Two, 6.6 dia. 50 53 45 26 29 22.5 48 E39-L93H E39-L93V 26.3 26.3 20.9 8 48 20.9 E3Z 8 48 E3Z 15° 15° 15° 12 dia. 12 dia. 216 15° 208 189 184 181 176 59 54 49 44 30 20 10 8 32 34 27 Two, 6.6 dia. 46 Two, 6.6 dia. 15 10 48 24 8 14 32 45 8 E39-L/F39-L/E39-S/E39-R E39-L94 E39-L93XY 4 Four, R1.6 197 4.8 3.2 165 8 20+0.20 35 22 4 23 38 Pipe (B) 3.2 15 20 1.2 20.9 26.3 3.2 Two, R1.6 2.3 5.8 E3Z Holder (A) 40 19 ±0.2 170 52 15° 15° 8 Material: Iron 12 dia. 11 3.2 dia. 24 48 E39-L96 Two, M3 Tap processing 4.3 dia. 213 4.6 189 45° 17.5° 60 4.6 17.5° E39-R1 reflector 9.5 (order separately) 29.5 12 dia. Material: Stainless steel (SUS304) 2-mm-thick Note: The E39-L93XY consists of only the one joint holder (A) and pipe, and the two hexagonal bolts and nuts. It cannot be mounted to the Sensor alone. E39-L97 E39-L98 Mounting Holes Mounting Holes Two, M6 30° 30° Stainless steel (SUS 304) 30° Two, M6 30° Two, R28 44±0.2 44±0.2 56 dia. 56 dia. Stainless steel (SUS 304) Four, R3.3 Four, R3.3 E3S-R 34 2.6 26 20 56 8.2 2 An attached screw 61 15 6.5 (For E3S-B) (For E3S-R) 20 20 50 25.4 20 25 16 (A)* 2 56 (E3S-R) 16 48 38.5 3 Two, R22 4 (For E3Z) An attached screw 16 E3S-R Two, R22 13.5 16 20 E39-L96 27 34.5 Center of pole brace 15.5 45° * Mounting Bracket can be attached to side (A) 8 24 34 9 E39-L/F39-L/E39-S/E39-R E39-L102 E39-L103 25.4±0.1 31±0.1 4.2 12 4.2 4.2 4.2 1.5 8.3 4.2 Material: Stainless steel (SUS304) 9.2 8.3 6.2 6.2 1.5 12 20 9.2 9.2 4.2 17.3 9.3 25.4±0.1 20 12.9 12.9 4.2 9.2 Material: Stainless steel (SUS304) 20 12 4.2 31±0.1 43.8 38.2 E39-L104 E39-L109 R1.7 Mounting Holes R1.7 3.4 5.8 14° Two, M3 12.5 (13.7) 10.6 5.4 R20 R1 36 4.5 6 3.4 29 3.4 6 3.2 1.2 R3.5 Two, 3.2 dia. 16 4636 R25.4 (39) 37.8 8.2 12 Material: Stainless steel (SUS430) 3.5 Material: Stainless steel (SUS304) 8.2 3.4 (14.7) 6 26 3.2 32.6 45.8 8.8 R1.6 R1 10° E39-L114 E39-L115 6.8 6.8 Two, M3 22 5.2 11 8.4 5.2 Four, 5.5 dia. 28 33.2 21 35 37 26 Six, R2.6 15° 15° 100 5.2 33 70 Material: Stainless steel (SUS430) R1 28 58 7 10 R28 R28 54 5 15 11.5 3 Material: Stainless steel (SUS304) 42 50 10 E39-L/F39-L/E39-S/E39-R E39-L116 E39-L117 Nut Plate Nut Plate (Four, R2) (Four, R2) (Two, R1.7) 3 3 Three, M2 9 Three, M2 (17.8) 7.5 15 20.5 1.6 5 7 (Two, R2) 4 (Two, R1.7) 11.2 2.2 11 1.2 (Two, R2) Two, R2 3.1 9.5 2.4 4 (Two, R1.1) 11.5 18 (23) 15 9 9 90° (Two, R1.2) 2.4 1.2 R1.5 max. E39-L118 R1 max. 90° (Two, R2) 7 Material: Stainless steel (SUS304) 1.2-mm-thick 15 20.5 Two, 3.4 4.1 31.2 9 Material: Stainless steel (SUS304) 3.4 1.2-mm-thick 3.1 10 Two, 2.2 5 (Two, R1.7) 5 10 (11.2) 4.5 (Two, R1.1) E39-L119 Nut Plate 1.2 (Four, R2) 11.5 3 Three, M2 90° 10.5 90° 11.5 9 1.2 90° 15 20.5 15 22.7 5 7 2.4 Four, M2 Tap processing 8 4.5 3.1 16 12 4 8 9 15 9 11.5 18 (23) Two, 2.2 (Two, R1.1) 5 3.1 3.4 (Four, R2) E39-L120 Material: Stainless steel (SUS304) 1.2-mm-thick E39-L127-T1 E39-L127-T2 E39-L127-T3 4.2 2.4 7 9 Material: Stainless steel (SUS304) 1.2-mm-thick 3.2 2.4 (Two, R1.7) 20 Four, 3.2 dia. (Mounting bracket holes) (5.4) 4 10 14 1.2 22.5 A 12 5.6 1.6 5.6 Four, M2.3 (Mounting sensor screws) Four, M2 Tap processing 8 2.3 3.2 7.5 2.4 15 30 16 12 8 9 2.4 6 Material: Stainless steel (SUS304) 1.2-mm-thick 13.5 Two, 5 dia. Material: Iron 20 A+24 Model Dimension A (mm) E39-L127-T1 10 E39-L127-T2 20 E39-L127-T3 30 11 E39-L/F39-L/E39-S/E39-R E39-L131 E39-L132 6.4 22 Two, R3.2 5.5 90°±1° 1.5 11.5 23.5 15° 6.4 23.5 11.5 2-R3.2 R34 35 25±0.1 1.5 6.4 Four, R1 Two, R3.2 Two, R2.2 5.5 R25 4.2 25±0.1 25±0.1 65.5 Four, R2.1 Two, 4.2 dia. Material: Stainless steel (SUS304) 4.4 45 R34 6.4 4.2 dia. Two, R3.2 35.5 8.5 10 22 R25 4.2 23.5 11.5 15° 23.5 90°±1° 8.5 Material: Stainless steel (SUS304) 45 E39-L135 6.4 E39-L136 Two, R3.2 90 6.4 15 2 28 18° 90°±1 R44 32 Two, R3.2 2° 5° 48 37±0.1 2 7 88 83 74 72 Two, 4.2 dia. 28 15 6.4 Two, R3.2 5.5 Eight, 4.2 37 20.5 74±0.1 5° 2-4.2 118 123 32 Two, R3.2 85 74 R82.7 Four, R2.1 Material: Stainless steel (SUS304) 10° R82.8 6.4 54.62 R82.7 R44 5° 90°±1° R82.7 18° 2° 5° Material: Stainless steel (SUS304) 58 E39-L142 Fourteen, R2.1 E39-L143 14 8.7 22 14 15.8 7 Four, 3.4-dia. holes (10.3) 34.8 22 16 2.5 3 25.4 37 5.3 55 R12 Material: Stainless steel (SUS304) 26.8 Two, 3.2 dia. 4.5 15.3 14° 1.5 7.3 3 7 4.5 16 3 4 4.5 Four, R1.7 3.4 10.3 10 max. 7 12 5 7 1 3.4 7.8 1 Material: Stainless steel (SUS304) 12 E39-L/F39-L/E39-S/E39-R E39-L144 E39-L148 25 16 R1.7 R1.7 Two, R17 Two, 50° 21 23 3.4 12 12 max. 9 2 Four, R1.6 2 3.4 14.2 3.5 Four, R1.6 22 16 9.5 25.4 38.5 7.3 Two, R25.4 4.3 3 1.5 7.3 Material: Stainless steel (SUS304) 1.5 9.1 3 27 35 4 Material: Stainless steel (SUS304) 5° E39-L149 E39-L150 E39-L151 20 14 5.5 4.5 Two, 3.5 52 13.6 Two, 3.2 dia. 45 Polybutylene terephthalate Four, 4.5 dia. 5.4 35 42.5 6.8 Four, R3 24 5.5 22.7 19 40.5 Two, 3.5 dia. 10 dia. Stainless steel (SUS 304) L 10.5 8 Two, 6.5 dia. 4.5 21 1 34 32 Polybutylene terephthalate 19 46 Length (mm) E39-L153 Model L E39-L150 65 E39-L151 165 14 8 3.5 7 7 4 Two, R1.75 3.5 4-3 Eight, R1.75 4 Four, 3.5 25.4 41 10 1.2 22 (Unit: mm) Contact Mounting Plate Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. E39-L60 6.5 (33) 20 6.5 11.75 2.5 11.75 5 3.4 dia. 2.5 3.4 dia. Material: PBT (polybutylene terephthalate) 5 13 E39-L/F39-L/E39-S/E39-R (Unit: mm) Reflector dimensions Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. E39-R1 E39-R1S E39-R1K * E39-R2 E39-R9 30.9 × 30.9 42.3 (21) 8 4 Material, reflective surface: acrylic Rear surface: ABS Two, 3.5 dia. 40.3 34 7 Material, reflective surface: acrylic Rear surface: ABS 7.5 80.8 74.5 Four, 3.5 dia. 7 Material, reflective surface: acrylic Rear surface: ABS E39-R10 7.5 7 15 25 35.4 3.5 5.5 Two, 3.6 dia. 8 47 × 47 8 59.9 52 61.4 59.9 52 (30.4) 8 10 5 2.7 1.6 * E39-R1K only Coating on reflective surface E39-R3 2.7 7 6.5 1.6 Material, reflective surface: acrylic Rear surface: ABS 34 E39-R4 30 40 51.6 3.5 5.5 Two, 4 dia. 8 E39-R6 13.7 4 4.9 2 23 9.7 19 Material, reflective surface: acrylic Rear surface: ABS 4 Material, reflective surface: acrylic Rear surface: ABS 6 4.5 3.4 29 3.4 R20 7 14° 13.7 18.45 22.9 20 0.2 Material, reflective surface: acrylic Rear surface: ABS 16 Two, 2.2 dia. 40 34 0.2 Mounting bracket Two, M3 13.7 Eight, R1 10.1 3.2 60 52 40 18.3 23 34 1.2 2.6 (1.1) Two, 3.2 dia. R25.4 34.8 38 1.2 10° Stainless steel (SUS304) 4.8 Reflector 13.7 8.7 23 18.3 10.2 41.8 25.4 1.4 E39-R37-CA 11 Adhesive tape side 22.5 19.3 2 Two, 3.1 dia. Reflector: t0.5 Two, R1.55 (adhesive tape side) Mounting Bracket: t 0.5 Material: Mounting plate: stainless steel (SUS301) Reflective surface: acrylic 3.5 3.5 Note: The reflective plate and mounting plate (1) come as a set. Reflectors only for E3T-SR4@. Retroreflector for E3ZM-B E39-RP1 8.5 44 3 0.2 80 72 63.6 Reflector Two, 3.5 dia. 14 E39-L/F39-L/E39-S/E39-R E39-RS1 E39-RS1-CA * E39-RS3 E39-RS3-CA * 35 0.5 10 80 Material: Acrylics 0.5 Adhesive tape side Four, R1 E39-RS2 E39-RS2-CA * 70 40 0.5 35 Material: Acrylics Material: Acrylics Four, R1 Adhesive tape side Adhesive tape side Four, R1 E39-R13 E39-R12/R14 5.5 4 R3 24 R2 7 7 a. .4 di 3 o, Tw 3 o, 12 di 17.2 .2 R3 .4 Tw 1 ,R ur Fo 6 23 a. R3 .2 30 ur , 1.6 .4 R1 23 R3 15 .7 Fo ur, Fo Fo ur , 45 2.9 .7 R3 37 E39-RS4 E39-RS5 0.4 0.4 108 195 46 22 Adhesive tape side Adhesive tape side * Models ending in the suffix “-CA” are reflectors only for E3T-SR4@. (Unit: mm) Sensitivity Adjuster E39-G1 Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. 4 9.3 dia.13 dia. Material: Polycarbonate (Unit: mm) Sensitivity Adjustment Driver E39-G2 8 dia. 0.8 Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. 1 (12.6) 7 dia. Material: Polycarbonate 15 E39-L/F39-L/E39-S/E39-R (Unit: mm) Lens Unit Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. E39-F1V 0.5-dia. hole 8.9 4 dia. 6 M2.6 × 0.45 Effective depth: 3.8 Countersunk with straight edge, depth: 0.9 (Unit: mm) Connection Sockets Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. Front Connection Socket Eleven, M3.5 × 7 Sems screw 22 PF113A Terminal arrangement/Internal connections (top view) 4 7 2 Two, M4 or 4.5 dia. 9 3 35.4 52 max. Mounting Holes 1 11 10 34±0.2 4 5 34 43 max. 4 3.5 2 5 Two, 4.2 × 5 mounting holes 3.4 Eight, M3 × 8 Sems screw 6 6 7 8 31 max. Front Connection Socket PYF08A Note: Rail mounting also possible. 4 Terminal arrangement/Internal connections (top view) 4 Mounting Holes 1 5 8 59±0.3 35.4 72 max. Two, M3 or M4 or 4.5 dia. 12 14 4 9 13 15±0.2 6 23 max. Note: Rail mounting also possible. 16.5 30 max. Front Connection Socket PY08 Terminal arrangement/Internal connections (bottom view) PCB Cutout Dimensions Mounting Holes 13.2 Eight, 3 × 1.2 ellipse hole 4.1 25.5 max. 29.5 max. 2.7 7.7 20 max. 2.6 1 4 5 8 9 12 13 14 5.8 25.8±0.2 6.35 12.65 6.4 21.4+0.2 0 4.2 Eight, 1.3 dia. holes 24 max. 16 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:  Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.  Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations.  Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. 2012.4 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2012 All Right Reserved.