E3CVM35R

Small Spot/Mark (Separate Amplifier) E3C-VS/VM CSM_E3C-VS_VM_DS_E_3_1 Extremely thin beam ideal for detection of minute objects and marks • Ideal for detection of small objects and slight color differences • Bad mark detection • Detection of thin wire of 200 µ • Detection of slight level differences. Be sure to read Safety Precautions on page 4. Ordering Information Sensors Sensor Heads Red light Sensing method Appearance Connection method Sensing distance E3C-VS3R 2M 30±5 mm Pre-wired (2 m) Model E3C-VS1G 2M 10±2 mm Reflective model (for mark detection) Green light 35±5 mm 70±10 mm E3C-VM35R 2M E3C-VS7R 2M Amplifier Units Power supply Application AC General-purpose models Appearance 48 Function --- E3C-A Timer E3C-C 109.5 49 30 Slim body 60 Self-diagnosis 14 Model E3C-JC4P 2M 27.2 Compact body 20.7 DC E3C-GE4 35.5 --- E3C-WE4 75 Front terminal 80 22.5 E3C-WH4F Accessories (Order Separately) Mounting Brackets Appearance Model E39-L42 Quantity Remarks 2 Can be used with the E3C-VS1G, or E3C-VS3R. Refer to Mounting Brackets on E39-L/F39-L/E39-S/E39-R for details. * If a through-beam model is used, order two Mounting Brackets; one for the Emitter and one for the Receiver. 1 E3C-VS/VM Ratings and Specifications Sensor Head Sensing method Item Model Reflective model (for mark detection) E3C-VS1G E3C-VS3R E3C-VM35R E3C-VS7R Sensing distance 10±2 mm 30±5 mm 35±5 mm 7±10 mm Minimum detectable object (black mark on white) 0.7 mm at central sensing distance 2 mm at central sensing distance 0.2 mm at central sensing distance 0.6 mm at central sensing distance Light source (wavelength) Green LED (565 nm) Red LED (680 nm) Red LED (660 nm) Ambient illumination Incandescent lamp: 1,000 lx max. (on light-receiving side) Sunlight: 3,000 lx max. (on light-receiving side) Ambient temperature range Operating: −10 to 70°C (with no icing or condensation) Storage: −25 to 70°C (with no icing or condensation) Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) Operating/storage: −25 to 70°C (with no icing or condensation) Insulation resistance 20 MΩ min. (at 500 VDC) Dielectric strength 500 VAC, 50/60 Hz for 1 min Vibration resistance (destruction) 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance (destruction) 500 m/s2 3 times each in X, Y, and Z directions Degree of protection IEC IP64 (indoors only) IEC IP50 (indoors only) Connection method Pre-wired cable (standard length: 2 m) Weight (packed state) Approx. 50 g Approx. 60 g Case Polycarbonate Heat-resistant ABS Lens Polycarbonate Glass Material Mounting Bracket Accessories --- Instruction manual Steel Mounting Bracket, Slotted/ Phillips screws M3 × 16, Spring washer, Flat washer, M3 nuts Mounting Bracket, Slotted/ Phillips screws M3 × 16, Spring washer, Flat washer, M3 nuts, Instruction manual Amplifier Units Refer to E3C. I/O Circuit Diagrams Refer to E3C. Connection Refer to E3C. Connectors Refer to E3C. 2 E3C-VS/VM Engineering Data (Typical) Operating Range E3C-VS3R X 0.6 Y Optical axis 0.4 4 0.3-mm dia. copper wire 3 0.1-mm dia. copper wire 2 8 9 10 11 12 13 −0.4 Distance X (mm) 40 X Y 0.03-mm dia. copper wire Optical axis 0.3-mm dia. copper wire 0.8 0.6 0.1-mm dia. copper wire 0.4 0.03-mm dia. copper wire 0.2 30 40 50 60 Distance Y (mm) 1.0 70 80 90 0.8 0.7-mm dia. pencil lead 0.6 0.4 40 Distance −0.2 X (mm) −0.4 50 60 70 80 Y Optical axis −1.0 −1.2 −1.6 3 Y 2 0.3-mm dia. copper wire Optical axis 1 0.1-mm dia. copper wire 0 90 20 30 40 50 60 70 80 Distance X (mm) 0.03-mm dia. copper wire −2 Y Optical axis −3 Y Optical axis 0.9-mm dia. pencil lead 0.5 30 40 50 60 E3C-VS3R Excess gain ratio E3C-VS1G X 1.0 50 30 10 7 5 50 30 10 7 5 3 Operating level 1 0.7 0.5 1 0.7 0.5 −1.0 0.3 0.3 −1.5 5 0 10 E3C-VM35R 50 30 10 7 5 100 150 Distance (mm) 50 100 150 Distance (mm) 50 30 10 7 5 3 Operating level 3 1 0.7 0.5 1 0.7 0.5 0.3 0.3 0.1 50 E3C-VS7R Excess gain ratio Excess gain ratio 0 15 20 Distance (mm) Operating level Distance X (mm) 0.5-mm dia. pencil lead Operating level 3 −0.5 X Excess Gain vs. Set Distance 1.5 20 −0.6 −0.8 E3C-VM35R 40 50 Distance X (mm) −0.8 X X −0.8 30 −1 −0.4 −0.6 20 0.5-mm dia. pencil lead 0 100 110 Distance X (mm) 10 E3C-VM35R 0.2 −0.2 0 −2.0 E3C-VS7R Excess gain ratio Distance Y (mm) 30 −4 E3C-VS7R Distance Y (mm) 20 −3 −0.8 0.5-mm dia. pencil lead 0.8 −0.4 −2 0.03-mm dia. copper wire −0.6 0 10 −1 Distance X (mm) Y Optical axis 1.2 0.4 0 14 X 0.7-mm dia. pencil lead 1.6 Distance Y (mm) 7 −0.2 0 2.0 1 0.2 0 E3C-VS3R Distance Y (mm) 0.8 Distance Y (mm) Distance Y (mm) E3C-VS1G 0 50 100 150 Distance (mm) 0.1 0 3 E3C-VS/VM Safety Precautions Refer to Warranty and Limitations of Liability. WARNING This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Precautions for Correct Use Do not use the product in atmospheres or environments that exceed product ratings. ● Wiring For details on Extension Cables, refer to E3C. (Unit: mm) Dimensions Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. Sensors Sensor Heads E3C-VS1G E3C-VS3R With Mounting Bracket Attached E3C-VM35R E3C-VS7R Two hexagonal nuts for M3 (diagonal: 5.5) (A)* Operation indicator 7 2.4 10 Emitter Receiver 26 Shielded cable, 2.4 dia. × 4.3, with two conductors (conductor cross section: 0.3 mm2) Standard length: 2 m 2 9 3.2 18 (47) 45 Lens surface 6.5 2 3.9 20 3.2 Shielded cable, 1.8 dia. × 3.6, with two conductors (conductor cross section: 0.18 mm2) Standard length: 2 m 10 R1.2 10 4 5 Light indicator 4 5 4 15 16 10 Emitter 3.2 9 Steel 4.3 19 3.2 2-M3 4 6.6 R3.3 A Beam position 2.4 Receiver 3 16 9 3.2 4 3.2 18 30 1.2 5.5 * The Mounting Bracket can be attached to side A. Amplifier Unit Refer to E3C for details. Accessories (Order Separately) Mounting Brackets Refer to E39-L/F39-L/E39-S/E39-R for details. 4 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: • Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. • Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. • Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. 2008.11 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2008 All Right Reserved.