PHOTOELECTRIC SENSORS
E3FA/B_-F2
Special family with inverted output logic
• Fully compatible with previous E3F2 family
• Simple installation due to compact format
• Wide variety of models
Ordering Information
E3FA/B straight types (PNP output) [Refer to Dimensions on page 8.]
Sensor type
Sensing distance
Through-beam*1
20 m
Retro-reflective with MSR
function*2
0.1 to 4 m
with E39-R1S
Diffuse-reflective
100 mm
300 mm
1m
100 mm
300 mm
1m
BGS
(background suppression)
100 mm
200 mm
*1
*2
Connection method
Red light
Infrared light
Model
Plastic housing
Metal housing
pre-wired
M12 connector
E3FA-TP11-F2 2M
E3FA-TP21-F2
E3FB-TP11-F2 2M
E3FB-TP21-F2
pre-wired
E3FA-RP11-F2 2M
E3FB-RP11-F2 2M
M12 connector
E3FA-RP21-F2
E3FB-RP21-F2
pre-wired
E3FA-DP11-F2 2M
E3FB-DP11-F2 2M
M12 connector
E3FA-DP21-F2
E3FB-DP21-F2
pre-wired
E3FA-DP12-F2 2M
E3FB-DP12-F2 2M
M12 connector
E3FA-DP22-F2
E3FB-DP22-F2
pre-wired
E3FA-DP13-F2 2M
E3FB-DP13-F2 2M
M12 connector
E3FA-DP23-F2
E3FB-DP23-F2
pre-wired
E3FA-DP14-F2 2M
E3FB-DP14-F2 2M
M12 connector
E3FA-DP24-F2
E3FB-DP24-F2
pre-wired
E3FA-DP15-F2 2M
E3FB-DP15-F2 2M
M12 connector
E3FA-DP25-F2
E3FB-DP25-F2
pre-wired
E3FA-DP16-F2 2M
E3FB-DP16-F2 2M
M12 connector
E3FA-DP26-F2
E3FB-DP26-F2
pre-wired
E3FA-LP11-F2 2M
E3FB-LP11-F2 2M
M12 connector
E3FA-LP21-F2
E3FB-LP21-F2
pre-wired
E3FA-LP12-F2 2M
E3FB-LP12-F2 2M
M12 connector
E3FA-LP22-F2
E3FB-LP22-F2
The set type includes the emitter and receiver.
The Reflector is sold separately. Select the Reflector model most suited to the application.
1
E3FA/B_-F2
E3RA/B radial types (PNP output) [Refer to Dimensions on page 8.]
Sensor type
Sensing distance
Retro-reflective with MSR
function*1
0.1 to 3 m
with E39-R1S
Diffuse-reflective
100 mm
300 mm
*1
2
Connection method
Red light
Model
Plastic housing
Metal housing
pre-wired
E3RA-RP11-F2 2M
E3RB-RP11-F2 2M
M12 connector
E3RA-RP21-F2
E3RB-RP21-F2
pre-wired
E3RA-DP11-F2 2M
E3RB-DP11-F2 2M
M12 connector
E3RA-DP21-F2
E3RB-DP21-F2
pre-wired
E3RA-DP12-F2 2M
E3RB-DP12-F2 2M
M12 connector
E3RA-DP22-F2
E3RB-DP22-F2
The Reflector is sold separately. Select the Reflector model most suited to the application.
E3FA/B_-F2
Ratings and Specifications
Straight type (E3FA/E3FB)
Model
Item
Sensing method
Through-beam
Pre-wired
E3F@-TP11-F2 2M
M12 Connector E3F@-TP21-F2
PNP
output
Sensing distance
Spot diameter (reference value)
Standard sensing object
Differential travel
Directional angle
Light source (wavelength)
Power supply voltage
20 m
Opaque: 7 mm dia.min.
Retro-reflective with MSR function
E3F@-RP11-F2 2M
E3F@-RP21-F2
0.1 to 4 m
(with E39-R1S)
—
Opaque: 75 mm dia.min.
—
2 min.
Red LED (624 nm)
Red LED (624 nm)
10 to 30 VDC (include voltage ripple of 10%(p-p) max.)
40 mA max.
Current consumption
25 mA max.
(Emitter 25 mA max. Receiver 15 mA max.)
PNP (open collector)
Control output
Load current: 100 mA max. (Residual voltage: 3 V max.), Load power supply voltage: 30 VDC max.
Operation mode
Light-ON/Dark-ON selectable by wiring
Operation indicator (orange)
Indicator
Stability indicator (green)
Power indicator (green): only Emitter of Through-beam
Protection circuits
Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection
Response time
0.5 ms
Sensitivity adjustment
One-turn adjuster
Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max./ Sunlight: 10,000 lx max.
Ambient temperature range
Operating: -25 to 55C/ Storage: -30 to 70C (with no icing or condensation)
Ambient humidity range
Operating: 35 to 85%/ Storage: 35 to 95% (with no condensation)
Insulation resistance
20 M min. at 500 VDC
Dielectric strength
1,000 VAC at 50/60 Hz for 1 min. between current-carrying parts and case
Vibration resistance
Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y and Z directions
Shock resistance
Destruction: 500 m/s2 3 times each in X, Y and Z directions
Degree of protection
IEC: IP67, DIN 40050-9: IP69K*1
E3FA: Approx. 110 g/ Approx. 50 g, respectively,
E3FA: Approx. 60 g/ Approx. 50 g,
Weight
Pre-wired cable (2M)
E3FB: Approx. 175 g/ Approx. 65 g, respectively
E3FB: Approx. 95 g/ Approx. 65 g
(packed
state/only
E3FA: Approx. 30 g/ Approx. 10 g, respectively,
E3FA: Approx. 20 g/ Approx. 10 g,
Connector
sensor)
E3FB: Approx. 85 g/ Approx. 20 g, respectively
E3FB: Approx. 50 g/ Approx. 20 g
Case
E3FA: ABS, E3FB: Nickel-brass
Lens and Display
PMMA
Material
Adjuster
POM
Nut
E3FA: POM, E3FB: Nickel-brass
Instruction sheet
Instruction sheet
Accessories
M18 nuts (4 pcs)
M18 nuts (2 pcs)
*1
IP69K Degree of Protection Specifications
IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards.
The test item is sprayed with 80C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of
water is 14 to 16 liters per minute.
The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0, 30, 60, and 90 from
the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.
3
E3FA/B_-F2
Straight type (E3FA/E3FB)
Sensing method
Diffuse-reflective
E3F@-DP11-F2 E3F@-DP12-F2 E3F@-DP13-F2 E3F@-DP14-F2 E3F@-DP15-F2 E3F@-DP16-F2
Model
Pre-wired
PNP
2M
2M
2M
2M
2M
2M
output
Item
M12 Connector E3F@-DP21-F2 E3F@-DP22-F2 E3F@-DP23-F2 E3F@-DP24-F2 E3F@-DP25-F2 E3F@-DP26-F2
100 mm
300 mm
1m
100 mm
300 mm
1m
Sensing distance
(white paper:
(white paper:
(white paper:
(white paper:
(white paper:
(white paper:
300 300 mm) 300 300 mm) 300 300 mm) 300 300 mm) 300 300 mm) 300 300 mm)
40 45 mm
40 50 mm
120 150 mm
40 50 mm
120 150 mm
40 45 mm
Sensing distance Sensing distance Sensing distance Sensing distance Sensing distance Sensing distance
Spot diameter (reference value)
of 100 mm
of 300 mm
of 100 mm
of 300 mm
of 1 m
of 1 m
Standard sensing object
—
Differential travel
20% max.
Directional angle
—
Infrared LED (850 nm)
Light source (wavelength)
Red LED (624 nm)
Power supply voltage
10 to 30 VDC (include voltage ripple of 10%(p-p) max.)
Current consumption
25 mA max.
PNP (open collector)
Control output
Load current: 100 mA max. (Residual voltage: 3 V max.), Load power supply voltage: 30 VDC max.
Operation mode
Light-ON/Dark-ON selectable by wiring
Operation indicator (orange)
Indicator
Stability indicator (green)
Protection circuits
Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection
Response time
0.5 ms
Sensitivity adjustment
One-turn adjuster
Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max./ Sunlight: 10,000 lx max.
Ambient temperature range
Operating: -25 to 55C/ Storage: -30 to 70C (with no icing or condensation)
Ambient humidity range
Operating: 35 to 85%/ Storage: 35 to 95% (with no condensation)
Insulation resistance
20 M min. at 500 VDC
Dielectric strength
1,000 VAC at 50/60 Hz for 1 min. between current-carrying parts and case
Vibration resistance
Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y and Z directions
Shock resistance
Destruction: 500 m/s2 3 times each in X, Y and Z directions
Degree of protection
IEC: IP67, DIN 40050-9: IP69K*1
E3FA: Approx. 60 g/ Approx. 50 g,
Weight
Pre-wired cable (2M)
E3FB: Approx. 95 g/ Approx. 65 g
(packed
state/only
E3FA: Approx. 20 g/ Approx. 10 g,
Connector
sensor)
E3FB: Approx. 50 g/ Approx. 20 g
Case
E3FA: ABS, E3FB: Nickel-brass
Lens and Display
PMMA
Material
Adjuster
POM
Nut
E3FA: POM, E3FB: Nickel-brass
Instruction sheet
Accessories
M18 nuts (2 pcs)
*1
4
IP69K Degree of Protection Specifications
IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards.
The test item is sprayed with 80C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of
water is 14 to 16 liters per minute.
The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0, 30, 60, and 90 from
the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.
E3FA/B_-F2
Straight type (E3FA/E3FB)
Sensing method
BGS (Background suppression)
Pre-wired
E3F@-LP11-F2 2M
E3F@-LP12-F2 2M
M12 Connector E3F@-LP21-F2
E3F@-LP22-F2
100 mm
200 mm
Sensing distance
(white paper:
(white paper:
300 300 mm)
300 300 mm)
10 10 mm
10 15 mm
Spot diameter (reference value)
Sensing distance of 100 mm
Sensing distance of 200 mm
Standard sensing object
—
Differential travel
20% max.
Directional angle
—
Light source (wavelength)
Red LED (624 nm)
Power supply voltage
10 to 30 VDC (include voltage ripple of 10%(p-p) max.)
Current consumption
25 mA max.
PNP (open collector)
Control output
Load current: 100 mA max. (Residual voltage: 3 V max.), Load power supply voltage: 30 VDC max.
Operation mode
Light-ON/Dark-ON selectable by wiring
Operation indicator (orange)
Indicator
Stability indicator (green)
Protection circuits
Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection
Response time
0.5 ms
Sensitivity adjustment
Fixed
Ambient illumination
Incandescent lamp: 3,000 lx max./ Sunlight: 10,000 lx max.
(Receiver side)
Ambient temperature range
Operating: -25 to 55C/ Storage: -30 to 70C (with no icing or condensation)
Ambient humidity range
Operating: 35 to 85%/ Storage: 35 to 95% (with no condensation)
Insulation resistance
20 M min. at 500 VDC
Dielectric strength
1,000 VAC at 50/60 Hz for 1 min. between current-carrying parts and case
Vibration resistance
Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y and Z directions
Shock resistance
Destruction: 500 m/s2 3 times each in X, Y and Z directions
Degree of protection
IEC: IP67, DIN 40050-9: IP69K*1 *
E3FA: Approx. 60 g/ Approx. 50 g,
Weight
Pre-wired cable (2M)
E3FB: Approx. 95 g/ Approx. 65 g
(packed
state/only
E3FA: Approx. 20 g/ Approx. 10 g,
Connector
sensor)
E3FB: Approx. 50 g/ Approx. 20 g
Case
E3FA: ABS, E3FB: Nickel-brass
Lens and Display
PMMA
Material
Adjuster
POM
Nut
E3FA: POM, E3FB: Nickel-brass
Instruction sheet
Accessories
M18 nuts (2 pcs)
Model
Item
*1
PNP
output
IP69K Degree of Protection Specifications
IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards.
The test item is sprayed with 80C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of
water is 14 to 16 liters per minute.
The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0, 30, 60, and 90 from
the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.
5
E3FA/B_-F2
Radial type (E3RA/E3RB)
Retro-reflective
with MSR function
Pre-wired
E3R@-RP11-F2 2M
M12 Connector E3R@-RP21-F2
Sensing method
Model
Item
PNP
output
Sensing distance
0.1 to 3 m
(with E39-R1S)
Spot diameter (reference value)
Standard sensing object
Differential travel
Directional angle
Light source (wavelength)
Power supply voltage
Current consumption
Control output
Operation mode
Indicator
Protection circuits
Response time
Sensitivity adjustment
Ambient illumination
(Receiver side)
Ambient temperature range
Ambient humidity range
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Degree of protection
Weight
(packed
state/only
sensor)
Material
Pre-wired cable (2M)
Connector
Case
Lens and Display
Adjuster
Nut
Accessories
*1
6
—
Diffuse-reflective
E3R@-DP11-F2 2M
E3R@-DP21-F2
100 mm
(white paper:
300 300 mm)
35 40 mm
Sensing distance
of 100 mm
Opaque:
75 mm dia.min.
E3R@-DP12-F2 2M
E3R@-DP22-F2
300 mm
(white paper:
300 300 mm)
40 45 mm
Sensing distance
of 300 mm
—
—
20% max.
2 min.
—
Red LED (624 nm)
10 to 30 VDC (include voltage ripple of 10%(p-p) max.)
25 mA max.
PNP (open collector)
Load current: 100 mA max. (Residual voltage: 2 V max.), Load power supply voltage: 30 VDC max.
Light-ON/Dark-ON selectable by wiring
Operation indicator (orange)
Stability indicator (green)
Power indicator (green): only Emitter of Through-beam
Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection
0.5 ms
One-turn adjuster
Incandescent lamp: 3,000 lx max./ Sunlight: 10,000 lx max.
Operating: -25 to 55C/ Storage: -30 to 70C (with no icing or condensation)
Operating: 35 to 85%/ Storage: 35 to 95% (with no condensation)
20 M min. at 500 VDC
1,000 VAC at 50/60 Hz for 1 min. between current-carrying parts and case
Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y and Z directions
Destruction: 500 m/s2 3 times each in X, Y and Z directions
IEC: IP67, DIN 40050-9: IP69K*1 *
E3RA: Approx. 60 g/ Approx. 50 g,
E3RB: Approx. 95 g/ Approx. 65 g
E3RA: Approx. 20 g/ Approx. 10 g,
E3RB: Approx. 50 g/ Approx. 20 g
E3RA: ABS, E3RB: Nickel-brass
PMMA
POM
E3RA: POM, E3RB: Nickel-brass
Instruction sheet
M18 nuts (2 pcs)
IP69K Degree of Protection Specifications
IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards.
The test item is sprayed with 80C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of
water is 14 to 16 liters per minute.
The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0, 30, 60, and 90 from
the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.
E3FA/B_-F2
Output circuit diagram
PNP Output
Operation
mode
Model
Light-ON
Operation
selector
Timing charts
Light incident
Light interrupted
Operation indicator ON
(orange)
OFF
ON
Output transistor
OFF
Operate
Load
(e.g., relay)
Reset
(Between blue
and black leads)
E3F@-TP@
E3F@-RP@
E3F@-DP@
E3R@-RP@
E3R@-DP@
Dark-ON
Output circuit
Through-beam Receivers, Retro-reflective Models,
Connect the
Diffuse-reflective Models.
pink wire
(Pin(2)) to the
brown (Pin(1))
10 to 30 VDC
Brown
Stability
Operation
1
or open the
indicator
indicator
(Green)
(Orange)
Light-ON
pink wire
100 mA max.
Black
(Control output)
(Pin(2))
Photo4
electric
Sensor
Main
Circuit
Light incident
Light interrupted
Operation indicator ON
(orange)
OFF
ON
Output transistor
OFF
Load
Operate
(e.g., relay)
Reset
(Between blue
and black leads)
Load
(Relay)
Blue
3
Connect the
pink wire
(Pin(2)) to the
blue (Pin(3))
2
0V
Dark-ON
Pink
Through-beam Emitter
Power
indicator
(green)
Brown
1
Photoelectric
Sensor
Main
Circuit
10 to 30 VDC
Blue
3
NEAR
FAR
Operation indicator ON
(orange)
OFF
Light-ON
Output transistor
Load
(e.g., relay)
ON
OFF
Operate
Reset
(Between blue
and black leads)
E3F@-LP@
NEAR
Output transistor
Load
(e.g., relay)
ON
OFF
Operate
Reset
(Between blue
and black leads)
1
Light-ON
Black
Blue
Connect the
pink wire
(Pin(2)) to the
blue (Pin(3))
2
Load
(Relay)
0V
Pink
Connectors (Sensor I/O connectors)
M12 Connector Pin Arrangement
M12 4-wire Connectors
1
100 mA max.
(Control output)
3
Connector Pin Arrangement
2
10 to 30 VDC
Brown
4
electric
Sensor
Main
Circuit
FAR
Operation indicator ON
(oramge)
OFF
Dark-ON
Background suppression.
Connect the
pink wire
(Pin(2)) to the
brown (Pin(1))
Stability
Operation
or open the
indicator
indicator
(Green)
(Orange)
pink wire
(Pin(2))
Photo-
Dark-ON
Pin No.
4
2
3
1
3
4
Classification
DC
Wire color
Brown
White
Blue
Black
1
2
3
4
Wire color
Connector pin No.
Application
Brown
➀
➁
➂
➃
Power supply (+V)
White
Blue
Black
L/on · D/on selectable
Power supply (0 V)
Output
7
E3FA/B_-F2
(Unit: mm)
Dimensions
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.
Sensors (E3FA/E3RA Plastic housing)
E3FA series
Pre-wired Models
E3FA-T@1@
E3FA-R@1@
E3FA-D@1@
E3FA-L@1@
Front view
Left side view
15
15
Emitter
23
30.5
Optical axis
Suitable models
E3FA-R@11
E3FA-D@1@
E3FA-L@1@
* Suitable models
E3FA-T@1@-D
E3FA-R@12
E3FA-D@1@
Right side view
Sensitivity adjuster *
45
Left side view
Left side view
15
15
2
34.5
Operation indicator (orange)
7 dia.
M18 × 30.5 P=1
Receiver
Stability indicator (green)
2
Mounting Holes
18.5+0.5
0 dia.
1
16.6 dia.
7
Emitter
Optical axis
E3RA series
Pre-wired Models
E3RA-R@11
E3RA-D@1@
18.5+0.5
0 dia.
Vinyl insulated round cable 4 dia. 4 cores
(conductor cross sectional area:0.128 mm2 (AWG26)
/insulation outside diameter:0.85 dia.)
standard length 2 m
Front view
Suitable models
E3FA-T@2@
Mounting Holes
Stability indicator (green)
16.6 dia.
Optical axis
E3FA series
M12 Connector Models
E3FA-T@2@
E3FA-R@2@
E3FA-D@2@
E3FA-L@2@
Operation indicator (orange)
2
7 dia.
M18 × 30.5 P=1
Receiver
7
Suitable models
E3FA-T@1@
Sensitivity adjuster *
41
34.5
Left side view
M12 × 4 P=1
23
30.5
Optical axis
Suitable models
E3FA-R@21
E3FA-D@2@
E3FA-L@2@
* Suitable models
E3FA-T@2@-D
E3FA-R@22
E3FA-D@2@
Rear view
Receiver
7
3
4
Terminal No.
Specification
1
+V
2
L/on · D/on selectable
3
0V
4
Output
Front view
Optical axis
Emitter
M18 30.5 P=1
14.1 dia.
5.2
14.9
Mounting Holes
35.9
43.4
47.4
53.9
18.5+0.5
0 dia.
7 dia.
Stability
indicator (green)
Suitable models
E3RA-R@11
E3RA-D@1@
E3RA series
M12 Connector Models
E3RA-R@21
E3RA-D@2@
Vinyl insulated round cable 4 dia. 4 cores
(conductor cross sectional area:0.128 mm2 (AWG26)
/insulation outside diameter:0.85 dia.)
standard length 2 m
Rear view
Receiver
7
Sensitivity adjuster
Operation indicator (orange)
Front view
Optical axis
Emitter
M18 30.5 P=1
14.1 dia.
5.2
14.9
Mounting Holes
35.9
43.4
47.4
57.9
18.5+0.5
0 dia.
7 dia.
Stability
indicator (green)
Sensitivity adjuster
Operation indicator (orange)
M12 4 P=1
Suitable models
E3RA-R@21
E3RA-D@2@
8
Bottom view
3
2
4
1
Terminal No.
Specification
1
+V
2
L/on · D/on selectable
3
0V
4
Output
E3FA/B_-F2
Sensors (E3FB/E3RB Metal housing)
E3FB series
Pre-wired Models
E3FB-T@11
E3FB-R@1@
E3FB-D@1@
E3FB-L@1@
Front view
Left side view
Mounting Holes
Stability indicator (green)
18.5+0.5
0 dia.
7
Emitter
Vinyl insulated round cable 4 dia. 4 cores
(conductor cross sectional area:0.128 mm2 (AWG26)
/insulation outside diameter:0.85 dia.)
standard length 2 m
23
29.9
Optical axis
Suitable models
E3FB-T@11
* Suitable models
E3FB-T@11-D
E3FB-R@12
E3FB-D@1@
Suitable models
E3FB-R@11
E3FB-D@1@
E3FB-L@1@
Front view
Right side view
Sensitivity adjuster *
48
Left side view
Left side view
37.5
7 dia.
M18 × 26.4 P=1
Receiver
Operation indicator (orange)
Stability indicator (green)
2
Mounting Holes
18.5+0.5
0 dia.
1
7
Emitter
Optical axis
Suitable models
E3FB-T@21
E3RB series
Pre-wired Models
E3RB-R@11
E3RB-D@1@
Operation indicator (orange)
7 dia.
M18 × 26.4 P=1
Receiver
Optical axis
E3FB series
M12 Connector Models
E3FB-T@21
E3FB-R@2@
E3FB-D@2@
E3FB-L@2@
Sensitivity adjuster *
44
37.5
Left side view
M12 × 4 P=1
23
29.9
Optical axis
Suitable models
E3FB-R@21
E3FB-D@2@
E3FB-L@2@
* Suitable models
E3FB-T@21-D
E3FB-R@22
E3FB-D@2@
Rear view
Receiver
7
3
4
Terminal No.
Specification
1
+V
2
L/on · D/on selectable
3
0V
4
Output
Front view
Optical axis
Emitter
M18 26.4 P=1
14.1 dia.
5.2
13
Mounting Holes
35.9
42.8
50.4 56.9
18.5+0.5
0 dia.
7 dia.
Stability
indicator (green)
Suitable models
E3RB-R@11
E3RB-D@1@
E3RB series
M12 Connector Models
E3RB-R@21
E3RB-D@2@
Vinyl insulated round cable 4 dia. 4 cores
(conductor cross sectional area:0.128 mm2 (AWG26)
/insulation outside diameter:0.85 dia.)
standard length 2 m
Rear view
Receiver
7
Sensitivity adjuster
Operation indicator (orange)
Front view
Optical axis
Emitter
M18 26.4 P=1
14.1 dia.
5.2
13
Mounting Holes
35.9
42.8
50.4
18.5+0.5
0 dia.
60.9
7 dia.
Stability
indicator (green)
M12 4 P=1
Suitable models
E3RB-R@21
E3RB-D@2@
Sensitivity adjuster
Operation indicator (orange)
Bottom view
3
2
4
1
Terminal No.
Specification
1
+V
2
L/on · D/on selectable
3
0V
4
Output
9
E3FA/B_-F2
Safety Precautions
Refer to Warranty and Limitations of Liability.
WARNING
This product is not designed or rated for directly or
indirectly ensuring safety of persons. Do not use it
for such a purpose.
CAUTION
5. Do not use the sensor under the environment under the other
conditions in excess of rated.
6. Do not use the sensor in place that is exposed by direct sunlight.
7. Do not use the sensor in place where the sensor may receive
direct vibration or shock.
8. Do not use the thinner, alcohol, or other organic solvents.
9. Never disassemble, repair nor tamper with the sensor.
10.Please process it as industrial waste.
Never use the product with an AC power supply.
Do not use the product with voltage in excess of the
rated voltage.
Do not use the product with incorrect wiring.
Otherwise, explosion, fire, malfunction may result.
Precautions for Safe Use
Be sure to follow the safety precautions below for added safety.
1. Do not use the sensor under the environment with explosive,
flammable or corrosive gas.
2. Do not use the sensor under the oil or chemical environment.
3. Do not use the sensor in the water, rain or outdoors.
4. Do not use the sensor in the environment where humidity is high
and condensation may occur.
Precautions for Correct Use
1. Laying Sensor wiring in the same conduit or duct as high-voltage
wires or power lines may result in malfunction or damage due to
conduit or use shielded cable.
2. Do not pull on the cable with excessive force.
3. If a commercial switching regulator is used, ground the FG (frame
ground) terminal.
4. The sensor will be available 100 ms after the power supply is tuned
ON. Start to use the sensor 100 ms or more after turning ON the
power supply. If the load and the sensor are connected to separate
power supplies, be sure to turn ON the sensor first.
5. Output pulses may be generated even when the power supply is
OFF. Therefore, it is recommended to first turn OFF the power
supply for the load or the load line.
6. The sensor must be mounted using the provided nuts. The proper
tightening torque range of E3FA/E3RA plastic housing series is
between 0.4 and 0.5 N°m. The proper tightening torque of E3FB/
E3RB metal housing series is 20 N°m max..
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON Corporation
Industrial Automation Company
Authorized Distributor:
Tokyo, JAPAN
Contact: www.ia.omron.com
10
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen, Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
© OMRON Corporation 2012 All Rights Reserved.
In the interest of product improvement,
specifications are subject to change without notice.
Printed in Japan
CSM_1_6_1013
Cat. No. E100E-EN-01
1013(1112)