E3JK-DS30M15M

Built-in Power Supply Photoelectric Sensor E3JM/E3JK CSM_E3JM_E3JK_DS_E_11A_1 Two Models Contribute to Overall Cost Reduction E3JM Terminal Block Models • Easy to wire and adjust. E3JK Pre-wired Models • Slim body is economically priced and full of functions. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Be sure to read Safety Precautions on page 10. Ordering Information Sensors (Refer to Dimensions on page 12.) E3JM Sensing method Red light Appearance Connection method Sensing distance Operation mode Output Functions configuration --Relay Timer Throughbeam (Emitter + Receiver) * 10 m Light-ON Dark-ON (switch selectable) Terminal block Retroreflective with MSR function Diffusereflective --DC SSR Timer Relay 4m DC SSR E39-R1 (provided) --Timer --Timer Relay --Timer 700 mm DC SSR --Timer Infrared light Model E3JM-10M4-N Emitter: E3JM-10L-N Receiver: E3JM-10DM4-N E3JM-10M4T-N Emitter: E3JM-10L-N Receiver: E3JM-10DM4T-N E3JM-10S4-N Emitter: E3JM-10L-N Receiver: E3JM-10DS4-N E3JM-10S4T-N Emitter: E3JM-10L-N Receiver: E3JM-10DS4T-N E3JM-R4M4 E3JM-R4M4T E3JM-R4S4 E3JM-R4S4T E3JM-DS70M4 E3JM-DS70M4T E3JM-DS70S4 E3JM-DS70S4T * Through-beam Sensors are sold in sets that include both the Emitter and Receiver. 1 E3JM/E3JK E3JK Sensing method Appearance Connection method Sensing distance Operation mode Output configuration Light-ON Relay Throughbeam (Emitter + Receiver) *1 5m Dark-ON Light-ON Dark-ON *2 Pre-wired (2 m) Retro-reflective with MSR function 2.5 m (3 m) *2 Retro-reflec- E39-R1 (provided) tive without MSR function 4m (5 m) Diffusereflective 300 mm Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON Both DC SSR selectable Relay Both DC SSR selectable Relay Both DC SSR selectable Relay Both DC SSR selectable Model E3JK-5M1-N 2M Emitter: E3JK-5L-N 2M Receiver: E3JK-5DM1-N 2M E3JK-5M2-N 2M Emitter: E3JK-5L-N 2M Receiver: E3JK-5DM2-N 2M E3JK-5S3-N 2M Emitter: E3JK-5L-N 2M Receiver: E3JK-5DS3-N 2M E3JK-R2M1 2M E3JK-R2M2 2M E3JK-R2S3 2M E3JK-R4M1 2M E3JK-R4M2 2M E3JK-R4S3 2M E3JK-DS30M1 2M E3JK-DS30M2 2M E3JK-DS30S3 2M Note: UL-listed models have the -US suffix. The model number for an E3JM Through-beam Sensor ends in “-US” (and not in “-N”). (Example: E3JM-10M4-US). The model number for an E3JK Through-beam Sensor has “-US” after “-N”. (Example: E3JK-5M1-N-US 2M). Tightening nuts, washers, and rubber bushings are not provided with these models. Change: Shape of the E3JM conduit socket Note, however, that DC-type E3JK SSR Output Models are not UL-listed. *1. Through-beam Sensors are sold in sets that include both the Emitter and Receiver. *2. Values in parentheses indicate the sensing distance when using E39-R2 Reflectors. Accessories (Order Separately) Slit (A Slit is not provided with the Sensor for through-beam. Order a Slit separately if required.) (Refer to Dimensions on page 12.) Slit width Sensing distance E3JM-10@4(T)-N Minimum detectable object (reference value) 1.2 m 1 mm × 20 mm 1-mm dia. E3JK-5@@-N Model E39-S39 0.7 m Quantity Remarks 1 Slit each for the Emitter and Receiver (2 Slits total) (Seal-type long slit) Can be used with the E3JM-10@4(T)-N and E3JK-5@@-N Through-beam Models. Reflectors (A Reflector is required for Retroreflective Sensors.) A Reflector is provided with the E39-R1 Sensor. For other Sensors, order a Reflector separately if required. (Refer to Dimensions on E39-L/E39-S/E39-R.) Name Sensing distance E3JM-R4@4(T) Reflectors Model Quantity 4m E3JK-R2@@ 2.5 m E3JK-R4@@ 4m E39-R1 1 Remarks Provided with the E3JM-R4@4(T) Provided with the E3JK-R2@@ Provided with the E3JK-R4@@ Note: Refer to Reflectors on E39-L/E39-S/E39-R for details. 2 E3JM/E3JK Mounting Bracket Some Mounting Brackets are provided with the Sensor. Order other Mounting Brackets separately if required. (Refer to E39-L/E39-S/E39-R) Appearance Model Quantity Remarks E39-L53 1 Provided with the E3JM. E39-L40 1 Provided with the E3JK. E39-L51 1 Mounting Bracket designed for changing from he E3A-M, E3A2, E3A3, OA-5, or OA-5N to the E3JM. Note: 1. When using a Through-beam Sensor, order one Connector for the Receiver and one for the Emitter. 2. Refer to Mounting Brackets on E39-L/E39-S/E39-R for details. 3 E3JM/E3JK Ratings and Specifications E3JM Sensing method Item Model Through-beam model Retro-reflective model (with MSR function) E3JM-10@4(T)-N E3JM-R4@4(T) Sensing distance 10 m Standard sensing object Opaque: 14.8-mm dia. min. Differential travel 4 m (When using E39-R1) Both Emitter and Receiver 3° to 20° 1° to 5° Light source (wavelength) Infrared LED (950 nm) Red LED (660 nm) Power supply voltage 12 to 240 VDC±10%, ripple (p-p): 10% max. 24 to 240 VAC±10%, 50/60 Hz DC 3 W max. (Emitter 1.5 W max. Receiver 1.5 W max.) 2 W max. AC 3 W max. (Emitter 1.5 W max. Receiver 1.5 W max.) 2 W max. Response time --20% max. of sensing distance --Infrared LED (950 nm) Relay output (E3JM-@@M4 (T) model): SPDT, 250 VAC, 3A (cosφ=1) max., 5 VDC, 10 mA min. DC SSR output (E3JM-@@S4 (T) model): 48 VDC, 100 mA max. (residual voltage: 2 V max.) Light-ON/Dark-ON selectable Control output Life expectancy (relay output) E3JM-DS70@4(T) White paper (200 × 200 mm): 700 mm Opaque: 75-mm dia. min. --- Directional angle Power consumption Diffuse-reflective model Mechanical 50,000,000 times min. (switching frequency: 18,000 times/h) Electrical 100,000 times min. (switching frequency: 1,800 times/h) Relay output (E3JM-@@M4 (T) models) Operate or reset: 30 ms max. DC SSR output (E3JM-@@S4 (T) models) Operate or reset: 5 ms max. Sensitivity adjustment --- One-turn adjuster Timer function * ON-delay/OFF-delay/One-shot delay switch selectable Delay time: 0.1 to 5 s (adjustable), only for E3JM-@@@4T Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max. Ambient temperature range Operating: −25°C to 55°C, Storage: −30°C to 70°C (with no icing or condensation) Ambient humidity range Operating: 45% to 85% (with no condensation), Storage: 35% to 95% (with no condensation) Insulation resistance 20 MΩ min. at 500 VDC Dielectric strength 2,000 VAC, 50/60 Hz for 1 min. Vibration resistance Destruction 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Malfunction 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance Destruction 500 m/s2 3 times each in X, Y, and Z directions Malfunction 100 m/s2 3 times each in X, Y, and Z directions Degree of protection IEC 60529: IP66 Connection method Terminal block Weight (packed state) Material Accessories Approx. 270 g Approx. 160 g Case ABS (Acrylonitril Butadiene Styrene) Lens Methacrylic resin Cover Polycarbonate Mounting Bracket Iron Mounting Bracket (with screw), Nuts, Terminal Protection Cover, One set of cable connection nuts (excluding -US Models), Instruction manual, Reflector (E39-R1: only for Retro-reflective Sensors) * The timer cannot be disabled for models with timer functions (E3JM-@@@4T). 4 E3JM/E3JK E3JK Sensing method Model Item Through-beam model E3JK -5M@-N E3JK -5S3-N Retro-reflective model (with MSR function) Retro-reflective model (without MSR function) Diffuse-reflective model E3JK -R2M@ E3JK -R4M@ E3JK -DS30M@ E3JK -R2S3 Sensing distance 5m 2.5 m (When using E39-R1) Standard sensing object Opaque: 14.8-mm dia. min. Opaque: 75-mm dia. min. Differential travel 4 m (When using E39-R1) Directional angle Light source (wavelength) Infrared LED (950 nm) Power supply voltage 12 to 240 VDC±10%, ripple (p-p): 10% max. 24 to 240 VAC±10%, 50/60 Hz Power consumption DC 3 W max. (Emitter 1.5 W max. Receiver 1.5 W max.) 2 W max. AC 3 W max. (Emitter 1.5 W max. Receiver 1.5 W max.) 2 W max. Relay output SPDT, 250 VAC, 3 A max. (cosφ= 1) 5 VDC, 10 mA min. DC SSR output, Negative: common 48 VDC, 100 mA max. Leakage current: 0.1 mA max. With load short-circuit protection 20% max. of sensing distance Red LED (660 nm) DC SSR output, Negative: common 48 VDC, 100 mA max. Leakage current: 0.1 mA max. With load short-circuit protection Relay output SPDT, 250 VAC, 3 A max. (cosφ= 1) 5 VDC, 10 mA min. 50,000,000 times min. (switching frequency: 18,000 times/h) Response time 30 ms max. Infrared LED (950 nm) Relay output SPDT, 250 VAC, 3 A max. (cosφ= 1) 5 VDC, 10 mA min. DC SSR output, Negative: common 48 VDC, 100 mA max. Leakage current: 0.1 mA max. With load short-circuit protection Relay output SPDT, 250 VAC, 3 A max. (cosφ= 1) 5 VDC, 10 mA min. DC SSR output, Negative: common 48 VDC, 100 mA max. Leakage current: 0.1 mA max. With load short-circuit protection 30 ms max. 5 ms max. 30 ms max. 5 ms max. 100,000 times min. (switching frequency: 1,800 times/h) 10 ms max. 30 ms max. Sensitivity adjustment 5 ms max. --- One-turn adjuster Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max. Ambient temperature range Operating: −25°C to 55°C, Storage: −30°C to 70°C (with no icing or condensation) Ambient humidity range Operating: 45% to 85% (with no condensation), Storage: 35% to 95% (with no condensation) Insulation resistance 20 MΩ min. at 500 VDC Dielectric strength 1,500 VAC, 50/60 Hz for 1 min. DestrucVibration tion resistance Malfunction 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Destruction 500 m/s2 3 times each in X, Y, and Z directions Malfunction 100 m/s2 3 times each in X, Y, and Z directions 500 m/s2 3 times each in X, Y, and Z directions Degree of protection IEC 60529 IP64 Connection method Pre-wired (standard length: 2 m) Weight (packed state) Approx. 420 g Material 100 m/s2 3 times each in X, Y, and Z directions 500 m/s2 3 times each in X, Y, and Z directions 100 m/s2 3 times each in X, Y, and Z directions 500 m/s2 3 times each in X, Y, and Z directions 100 m/s2 3 times each in X, Y, and Z directions 500 m/s2 3 times each in X, Y, and Z directions Approx. 250 g Case ABS (Acrylonitril Butadiene Styrene) Lens Methacrylic resin Mounting Bracket Iron Accessories White paper (100 × 100 mm): 300 mm --- Life ex- Mechanipectan- cal cy (relay output) Electrical Shock resistance E3JK -DS30S3 --- --Both Emitter and Receiver 3° to 1° to 5° 20° Control output E3JK -R4S3 Mounting Bracket (with screws), Nuts, Instruction manual, Reflector (Retro-reflective Models only) 5 E3JM/E3JK Engineering Data (Reference Value) Parallel Operating Range E3JM-10@4(T)-N E3JM-10@4(T)-N + E39-S39 (Optional Slit) E3JM-R4@4(T) + E39-R1 (A Slit is mounted to the Emitter and Receiver.) (Supplied Reflector) Distance Y (mm) Through-beam 600 400 200 0 2 4 6 8 10 12 Retro-reflective 60 Distance Y (mm) Distance Y (mm) Through-beam Y 40 X 20 0 14 16 0.5 1 1.5 2 2.5 3 150 Reflector: E39-R1 100 50 0 3.5 1 2 3 4 5 6 Distance X (m) −20 −200 −400 Y X −600 −50 −40 −100 −60 −150 7 8 Distance X (m) Distance X (m) Y X Operating Range Diffuse-reflective E3JM-DS70@4(T) Distance Y (mm) 60 Sensing object: 200 × 200 mm 50 Y 40 X 30 20 10 0 2 4 6 8 10 −10 Distance X (m) −20 White paper Black carbon SUS (Luster) Aluminum foil (No luster on the back) −30 −40 −50 −60 Excess Gain Ratio vs. Set Distance Retro-reflective E3JM-10@4(T)-N E3JM-R4@4(T) + E39-R1 (Supplied Reflector) 1,000 E3JM-R4@4(T) + E39-R3 (Optional Reflector) Excess gain ratio 1,000 Reflector: E39-R1 500 500 100 50 1,000 Reflector: E39-R3 500 300 Excess gain ratio Excess gain ratio Through-beam 100 50 100 50 30 10 10 5 5 5 3 Operating 1 level 0.5 Operating 1 level 0.5 Operating 1 level 0.5 0.3 0.1 0 2 4 6 8 10 12 14 16 18 Distance (m) 10 0.1 0 1 2 3 4 5 6 7 8 9 Distance (m) 0.1 0 1 2 3 4 5 6 7 8 9 Distance (m) 6 E3JM/E3JK Sensing Object Size vs. Sensing Distance Diffuse-reflective E3JM-DS70@4(T) 1,000 Sensing object: 500 white paper 200 × 200 mm 12 Distance (m) Excess gain ratio E3JM-DS70@4(T) 100 10 50 8 10 6 White paper Black carbon SUS (Luster) Aluminum foil (No luster on the back) 5 4 Operating 1 level 0.5 2 0.1 0 100 200 300 400 500 600 700 800 900 0 20 40 60 80 100 120 140 160 180 200 220 Side length of sensing object (mm) Distance (mm) Parallel Operating Range Through-beam E3JK-5@@-N + E39-S39 (Optional Slit) (A Slit is mounted to the Emitter and Receiver.) Distance Y (mm) Distance Y (mm) E3JK-5@@-N 600 400 200 0 1 2 3 4 5 6 30 Y 20 X 10 0 7 0.5 1 1.5 −200 −10 −400 2 Distance X (mm) Distance X (mm) −20 Y X −600 −30 Retro-reflective 150 E3JK-R4@@ + E39-R1 (Supplied Reflector) 150 Distance Y (mm) Distance Y (mm) E3JK-R2@@ + E39-R1 (Supplied Reflector) Reflector: E39-R1 Y 100 100 X 50 0 −50 Reflector: E39-R1 1 2 3 4 Distance X (mm) 50 0 1 2 3 4 5 6 Distance X (m) −50 −100 −100 −150 −150 Y X 7 E3JM/E3JK Sensing Object Size vs. Sensing Distance Diffuse-reflective Diffuse-reflective E3JK-DS30@@ E3JK-DS30@@ Distance (m) 50 Distance (m) Operating Range Sensing object: 100 × 100 mm Y 40 30 X 5 4 20 10 White paper Black carbon SUS (Luster) Aluminum foil (No luster on the back) 3 0 1 2 3 4 −10 2 Distance (m) −20 White paper Black carbon SUS (Luster) Aluminum foil (No luster on the back) −30 −40 −50 1 0 10 20 30 40 50 60 70 80 90 100 110 Side length of sensing object (mm) Excess Gain Ratio vs. Set Distance Through-beam Retro-reflective E3JK-5@@-N E3JK-R2@@ + E39-R1 (Supplied Reflector) Excess gain ratio Excess gain ratio 1,000 500 300 100 50 30 100 Reflector: E39-R1 50 30 10 5 10 3 5 3 Operating 1 level Operating1 level 0 1 2 3 4 5 6 7 8 0 1 2 3 4 Distance (m) Distance (m) Diffuse-reflective E3JK-DS30@@ 100 Reflector: E39-R1 Excess gain ratio Excess gain ratio E3JK-R4@@ + E39-R1 (Supplied Reflector) 50 30 10 100 Sensing object: 100 × 100 mm 50 30 10 5 5 3 3 Operating 1 level Operating 1 level 0 1 2 3 4 Distance (m) 5 0 100 200 300 400 500 Distance (mm) 8 E3JM/E3JK I/O Circuit Diagrams E3JM Relay Output Models Model E3JM-10M4(T)-N *1 E3JM-R4M4(T) Timing chart 24 to 240 VAC 12 to 240 VDC Incident light No incident light Indicator (red) *2 L-ON (Ta) E3JM-DS70M4(T) Output circuit D-ON (Ta) Photoelectric Sensor main circuit ON OFF ON Power Source 1 No polarity 2 OFF ON OFF 3 Tb 4 Tc 5 Ta Contact output (Built-in Relay: G6C) Refer to page 10 for information on Sensors with timers (T). DC SSR Output Models Model Timing chart Output circuit 24 to 240 VAC 12 to 240 VDC Power Source 1 No polarity E3JM-10S4(T)-N *1 Incident light No incident light Indicator (red) *2 E3JM-R4S4(T) L-ON (Ta) E3JM-DS70S4(T) D-ON (Ta) 2 ON OFF ON OFF ON OFF Refer to page 10 for information on Sensors with timers (T). L/ON NO I1 D/ON Photoelectric Sensor main circuit Load 3 Drive Circuit 48 VDC max. Load 5 Drive Circuit NC I2 I1+I2