E3S-BT11-D-M1J0.3M

General Purpose Photoelectric Sensor E3S-B Miniature DC Sensor with Built-in Amplifier Offers Vertical or Horizontal Single-Screw Mounting H H H H H Visible red beam High-speed sensing, 0.5 ms response time NEMA 4X, 6 and IP67 Single-screw mounting Pre-wired, Light-ON/Dark-ON wire selectable Ordering Information J SENSORS Through-beam sensors include both emitter and receiver. The polarized retroreflective sensors include E39-R1 reflector. All sensors include mounting hardware. Method of detection Through-beam Polarized retroreflective Diffuse reflective Sensing distance 2 m (6.56 ft) 1 m (3.28 ft) 20 cm (7.87 in) Mounting Output Part number Horizontal NPN E3S-BT11 E3S-BR11 E3S-BD11 PNP E3S-BT31 E3S-BR31 E3S-BD31 NPN E3S-BT61 E3S-BR61 E3S-BD61 PNP E3S-BT81 E3S-BR81 E3S-BD81 Vertical J ACCESSORIES Description Part number Slits for E3S-BTjj sensors (3 pairs of adhesive slits: 2 mm, 1 mm and 0.5 mm wide) E39-S47 Aperture kit for E3S-BTjj sensors (3 pairs of adhesive apertures: 2 mm, 1 mm and 0.5 mm dia.) E39-S48 Mutual interference filters for E3S-BTjj sensors (2 pairs: horizontal and vertical, includes mounting hardware) E39-E8 Small corner cube reflector 10 to 60 cm (3.94 to 23.62 in) E39-R3 7 to 35 cm (2.76 to 13.78 in) E39-R4 10 to 20 cm (3.94 to 7.87 in) E39-RSA 10 to 30 cm (3.94 to 11.81 in) E39-RSB Adhesive back reflector Stainless steel mounting bracket for E39-R1 reflector E39-L7 Stainless steel mounting bracket for E39-R3 reflector E39-L54 J ACCESSORIES Description Part number Corner cube reflector (supplied with E3S-BRjj) E39-R1 Stainless steel mounting bracket for horizontal sensors (supplied with each sensor) E39-L71 Stainless steel mounting bracket for vertical sensors (supplied with each sensor) E39-L72 Mounting adapter plate E39-L61 2 E3S-B E3S-B Specifications Part number E3S-BTjj E3S-BTjj E3S-BDjj Method of detection Through-beam Polarized retroreflective Diffuse reflective Supply voltage 10 to 30 VDC, !10% Current consumption 35 mA max. (emitter and receiver) 25 mA max. Sensing distance 0 to 2 m ((0 to 6.56 ft)) 0.1 to 1 m with E39-R1 ((0.33 to 3.28 ft)) White mat paper Black mat paper With accessories Light source Standard object 0.1 to 20 cm (0.04 to 7.87 in) 0.2 to 6 cm (0.08 to 2.36 in) 60 cm (1.97 ft) with E39-E8 filter 1 m (3.28 ft) with 2 mm slit 50 cm (1.64 ft) with 1 mm slit 25 cm (9.84 in) with 0.5 mm slit 60 cm (1.97 ft) with 2 mm dia. aperture 17 cm (6.69 in) with 1 mm dia. aperture 4 cm (1.57 in) with 0.5 mm dia. aperture 10 to 60 cm with E39-R3 (3.94 to 23.62 in) 7 to 35 cm with E39-R4 (2.76 to 13.78 in) 10 to 20 cm with E39-RSA (3.94 to 7.87 in) 10 to 30 cm with E39-RSB (3.94 to 11.81 in) — Pulse modulated red LED (700 nm) Type Opaque materials Opaque materials Opaque and transparent objects Size 5.5 mm (0.22 in) dia. minimum 30 mm (1.18 in) dia. minimum 10 x 10 cm (3.94x 3.94 in) white mat paper Operation mode Light-ON/Dark-ON operation, wire selectable Variation in sensing distance — — +30% max., -0% max. Hysteresis — — 20% max. Variation in optical axis and mounting direction !2_ max. Sensitivity Adjustable, 3/4-turn potentiometer Provided Provided Mutual interference protection Not provided Control output Type NPN transistor, open collector (E3S-Bj11, E3SBj61) PNP transistor, open collector (E3S-Bj31, E3SBj81) Max. load 100 mA max. at 30 VDC Max. ON-state voltage drop 1 VDC max. at 100 mA load current Response time 0.5 ms max. for both ON and OFF operation Circuit protection Load short-circuit protection, reverse polarity protection Indicators Emitter: Operation (red) Receiver: Operation (red) Stability (green) Materials Operation (red), Stability (green) Lens Denatured polyarylate Case Polybutylene terephthalate (PBT) Bracket Stainless steel Mounting Either side surface with one stud and one threaded hole. Bracket E39-L71 for horizontal or E39-L72 for vertical sensors and hardware included. Connections Prewired 2 m (6.56 ft) long cable Weight g Emitter 56 g (1.96 (1 96 oz) 56 g (1.96 (1 96 oz) 65 g (2.28 (2 28 oz) — — Receive 66 g (2.31 oz) Enclosure rating IEC 144 IP67 NEMA 4X, 6 Ambient temperature Operating -25_ to 55_C (-13_ to 131_F) with no icing Storage -40_ to 70_C (-40_ to 158_F) 3 E3S-B E3S-B J OUTPUT CIRCUIT DIAGRAMS NPN Output PNP Output Through-beam Emitter Through-beam Emitter Through-beam Receiver, Retroreflective, Diffuse Reflective Through-beam Receiver, Retroreflective, Diffuse Reflective Note: Circuits shown are for Light-ON operation. For Dark-ON operation, the gray wire is connected to the black wire (0 VDC). IEC colors are shown in parentheses. Engineering Data J EXCESS GAIN RATIO Excess Gain vs. Set Distance (Typical) j1 E3S-BTj j1 (with E39-R1 Reflector) E3S-BRj j1 (Detection of White Paper) E3S-BDj j1 (Detection of Black Paper) E3S-BDj 4 E3S-B E3S-B J OPERATING RANGE Parallel Operating Range (Typical) Sensing Distance vs. Set Distance j1 (Left and Right) E3S-BTj j1 (Up and down) E3S-BTj j1 (Left and Right) E3S-BDj j1 (Up and down) E3S-BDj j11 E3S-BTj Dimensions Unit: mm (inch) J SENSORS E3S-BT11 E3S-BT31 Receiver Emitter 1 (0.04) 1 (0.04) 28 (1.10) 10 (0.39) 10 (0.39) 12.5 (0.49) 12.5 (0.49) 28 (1.10) Cable 4 mm OD, 2 m length 3.1 (0.12) 29 (1.14) 29 (1.14) 1.3 (0.05) 16 (0.63) 25 (0.98) 1.5 (0.06) 25.5 (1.00) 22 (0.87) E39-L71 Mounting bracket 5 M3 X 8 1.5 (0.06) E3S-B E3S-B Unit: mm (inch) E3S-BT61 E3S-BT81 Emitter Receiver 16 (0.63) 16 (0.63) 10 (0.39) 20 (0.79) 19.2 (0.76) 10 (0.39) 20 (0.79) 19.2 (0.76) 13 (0.51) 13 (0.51) 12.6 (0.50) 12.6 (0.50) 1.3 (0.05) 16 (0.63) 16 (0.63) 28 (1.10) 44.8 (1.76) E3S-BR11 E3S-BR31 Sensitivity adjuster (white) 1 (0.04) 30.3 (1.19) 10 (0.39) 12.5 (0.49) 29 (1.14) 1 (0.04) 16 (0.63) 27.8 (1.09) 22 (0.87) 6 1.5 (0.06) E3S-B E3S-B E3S-BR61 E3S-BR81 16 (0.63) 1 (0.04) 10 (0.39) 20 (0.79) 19.2 (0.76) 13 (0.51) 12.6 (0.50) 28 (1.10) 16 (0.63) 44.8 (1.76) 4 (0.16) E3S-BD11 E3S-BD31 1 (0.04) 28 (1.10) 10 (0.39) 12.5 (0.49) 29 (1.14) 1.3 (0.05) 16 (0.63) 25.5 (1.00) 22 (0.87) 7 1.5 (0.06) E3S-B E3S-B Unit: mm (inch) E3S-BD61 E3S-BD81 16 (0.63) 1 (0.04) 10 (0.39) 20 (0.79) 19.2 (0.76) 13 (0.51) 12.6 (0.50) 28 (1.10) 44.8 (1.76) 16 (0.63) 4 (0.16) J CORNER CUBE REFLECTORS E39-R1 Reflector j) (Included with E3S-ARj E39-L7 R1 Reflector Adapter for E39-R1 Reflector (Order Separately) 40.3 (1.59) 34 (1.34) Two, 3.5 (0.14) dia. 7.5 (0.30) 7 (0.28) 39.3 (1.56) 3.2 (0.13) 34 (1.34) 12 (0.47) Nut (M5) 59.9 (2.36) 52 (2.05) 59 (2.32) 52 (2.05) 62.1 (2.44) M5 Spring washer (M5) Two M3 1.6 (0.06) 2.7 (0.11) 8 (0.31) 8 E3S-B E3S-B E39-R1 Reflector (Optional) Dimensions with E39-L54 Mounting Bracket (included) 29 (1.14) 7.5 (0.30) 2.7 (0.11) 4.5 (0.18) 34 (1.34) 7 (0.28) 3.4 (0.13) 20 (0.79) 22.9 (0.90) 52 59.9 (2.05) (2.36) 11 (0.43) 0.2 (0.01) 16 (0.63) 1.6 (0.06) 8 (0.31) 10.1 (0.40) E39-R4 Optional Mini-reflector 34 (1.34) 38 (1.50) 41.8 (1.65) 1.2 (0.05) 13.7 (0.54) 4.9 (0.19) 23 (0.91) 1.4 (0.06) 2 (0.08) E39-RSA Optional Adhesive-backed Reflector E39-RSB Optional Adhesive-backed Reflector 40 (1.57) 0.7 (0.03) 35 (1.38) 0.7 (0.03) 35 (1.38) J SLITS AND APERTURES FOR THROUGH-BEAM SENSORS E39-S47 Slit Set The kit includes two sets each of 0.5 mm, 1 mm and 2 mm slits. Mount the adhesive-backed slit to the lens of both emitter and receiver. Use the same slit size on both emitter and receiver for best results. 13 (0.51) E39-S48 Aperture Set The kit includes two sets each of 0.5 mm, 1 mm and 2 mm diameter apertures. Mount the adhesive-backed aperture to the lens of both the emitter and receiver. Use the same aperture size on both emitter and receiver for best results. 13 (0.51) 9 E3S-B E3S-B J MUTUAL INTERFERENCE FILTER J MOUNTING ADAPTER PLATE E39-E8 E39-L61 28 (1.10) 2.5 (0.10) 16.2 (0.64) 14.5 (0.57) 2.1 (0.08) 2.2 (0.09) Operation J SENSITIVITY ADJUSTMENT Unlike conventional photoelectric sensors, the variation in the sensitivity of E3S photoelectric sensors is minimal. This means the sensitivity can be adjusted on only a single photoelectric sensor, and then the adjusters on the other photoelectric sensors can be set to the same scale position. There is no need to adjust the sensitivity of each photoelectric sensor individually. Steps Step 1 Step 2 Step 3 Function Determine Position A Determine Position B Adjust to optimum setting Sensing condition Photoelectric sensor Photoelectric sensor Photoelectric sensor Target Target Target Sensitivity adjuster Min Indicators OFF OFF ON STABILITY (green) Max Min Max LIGHT (red) Place target at the desired sensing distance. Set sensitivity adjuster to the minimum scale position and gradually increase sensitivity by turning the sensitivity adjuster clockwise until the Light Incident indicator (red LED) turns ON. Position A designates the point at which the LED has turned ON. OFF STABILITY (green) Max OFF ON LIGHT (red) Remove the target. Starting from the maximum scale position, gradually decrease sensitivity by turning the sensitivity adjuster counterclockwise until the Light Incident indicator (red LED) is OFF. Position B designates the point at which the LED has turned OFF. 10 Min STABILITY (green) LIGHT (red) Set the sensitivity indicator to the position between Positions A and B (in some cases, Positions A and B are opposite of the above example). The photoelectric sensor will then work normally if the stability indicator (green) is lit with and without the target. If it is not lit, stable operation cannot be expected, in which case a different detection method should be applied. E3SB E3SB NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. R OMRON ELECTRONICS LLC OMRON ON--LINE OMRON CANADA, INC. 1-800-55-OMRON Global -- http://www.omron.com USA -- http://www.omron.com/oei Canada -- http://www.omron.com/oci 416-286-6465 One East Commerce Drive Schaumburg, IL 60173 Cat. No. CEDSAX4 11/01 Specifications subject to change without notice. 885 Milner Avenue Scarborough, Ontario M1B 5V8 Printed in U.S.A.