Compact Photoelectric Sensor with Stainless Steel Housing
E3ZM
CSM_E3ZM_DS_E_5_4
Stainless Steel Housing Ideal for Food
Industry PAT Pending
• Strong resistance against detergents, disinfectants, and jet liquid flow.
• Product lineup includes BGS Reflective Models and Through-beam
Models with built-in slits.
• Certified by Ecolab Europe.
Be sure to read Safety Precautions on
page 13.
Features
World's t
es
Strong
Withstands Detergent and
Disinfectant Spray
We used SUS316L for the case and
the best material for all parts to
achieve 200 times the durability of
the E3Z (in 1.5% solution of sodium
hydroxide at 70˚C) to make the
E3ZM suitable for the cleaning
conditions of food-processing
machinery.
's
's
W
Woorrlldd
t
s
s
r
i
r
FFi t
Superior Protective Structure
The first IP69K* (DIN 40050-9)
protective structure in the world
for a square metal photoelectric
sensor. Suitable for hightemperature, high-pressure jet
water spray cleaning applications.
* Refer to the footnote on page 5 (ratings
and specifications table).
y's
Industr
s
e
B t
Rear
Shape and Markings Designed
for Greater Hygiene
Few indentations in the shape
means less dust and water can
collect, making the E3ZM more
hygienic. No labels have been used
in order to prevent foreign matter
contaminating food products. The
E3ZM model and lot numbers are
imprinted using a laser marker.
1
E3ZM
Structural Design That Provides Excellent Environment-resistance*
Indicator cover: Polyethersulfone (PES)
Excellent resistance to detergents and disinfectants.
Sensitivity adjustment and mode
selector switch:
Polyetheretherketone (PEEK)
Waterproofing ring: Fluorine rubber
Excellent resistance to detergents and
disinfectants.
Excellent resistance to detergents and
disinfectants. Also has excellent abrasion
resistance.
Optical plate:
Polymethylmethacrylate (PMMA)
Case: SUS316L
Excellent resistance to detergents
and disinfectants. High
transparency and other qualities
give PMMA excellent optical
characteristics.
Excellent corrosion resistance
to many chemical reagents.
Cable: Polyvinylchloride
Seal
Excellent resistance to detergents and
disinfectants.
The seal provides the durability to
high-temperature and high-pressure
water that complies with IP69K.
*Do not use the E3ZM in an oily environment.
Unique Members of the E3ZM Family
BGS Reflective Models
E3ZM-LS6@H/-LS8@H
Three models with different fixed sensitivity (rated sensing distances)
have been created. These models cover the sensing ranges of the E3ZLS61.
100mm
150mm
200mm
Through-beam Inner Aperture Models
E3ZM-T63
Fine beam without attaching an external aperture. This eliminates
malfunctions from residual water drops, even immediately after
washing.
0.8 m
Same minimum detection object
(0.7-mm dia.) as the E3Z-T61+E39-S65C
(2-mm-dia. aperture).
A Better Fit for the Application
The E3ZM can be used in those harsh cleaning
environments in which the E3Z was difficult to use.
E3ZM passed the material resistance tests and is certified
by Ecolab.
Ecolab GmbH & Co. OHG
P.O. Box 13 04 06
D-40551 Düsseldorf
This certificate is based on:
documented test procedures (test no.: F&E/P3-E Nr. 40-1)
according to material resistance
defined product descriptions
standardized cleaning procedure
certifies that for
OMRON Manufacturing of Germany GmbH
Carl-Benz-Strasse 4
71154 Nufringen
material resistance tests
Test procedure
Ecolab-test F&E Nr. 40-1
Dipping test:
• Complete immersion in solutions/liquid
Test period:
• 14 days
Temperature:
• room temperature (constant)
were performed with cleaning substances P3-topax 56, P3-topax 66, P3-topax
91, P3 Topactiv DES and demineralized water as a zero reference factor.
The material resistance of the tested series
Photoelectric Sensor E3ZM
Analysis:
Visual judgement like swelling, brittleness,
discoloring
compared to zero-reference factor
(demineralized water)
Photometric documentation
Product specifications:
P3-topax 56:
Acid foam cleaning substance for food industry
P3-topax 66:
Alkaline cleaning detergent with active chlorine
for machine cleaning in food and beverage
industry
P3-topax 91:
Neutral disinfection agent based on
quaternary ammonium compounds (QAV) for
food industry
P3-topactive DES:
Acid disinfectant based on Peracetic Acid and
Hydrogen Peroxide for the food and beverage
industry
to the P3 products used in the test can be considered to be positive according to
the cleaning procedure mentioned overleaf.
Cleaning plan for food and beverage industry*
Düsseldorf, 14th February 2006
Rinsing with water 40 – 50°C
Rinsing with low pressure. Rinsing from top to bottom in the
direction of the drains. Cleaning of the drains.
Ecolab GmbH & Co. OHG
i.V.
i.
Thomas Tyborski
Processing and wrapping of
meat or raw food products
Foaming from bottom to top
alkaline:
P3-topax 66 2 – 5 %
acid:
P3-topax 56 2 %
temperature: cold up to 40°C
contact time: 15 min. recommended
V.
Reimund Laaff
daily
on demand
Rinsing with water 40 – 50°C
Rinsing from top to bottom with low pressure
Spray disinfection P3-topax 91 1-2 %, 30 -60 minutes
Foam disinfection P3-topactive DES 1-2 %, 10-30 minutes
*short description
2
E3ZM
Ordering Information
Sensors
(Refer to Dimensions on page 15.)
Sensing
method
Appearance
Red light
Connection
method
Sensing distance
Pre-wired (2 m) *3
15 m
Connector (M8, 4 pins)
Throughbeam *4
(Emitter +
Receiver) *5
Pre-wired (2 m) *3
Connector (M8, 4 pins)
Retroreflective with
MSR function
0.8 m
(apertures built in)
*2
Pre-wired (2 m) *3
Infrared light
Model
NPN output
E3ZM-T61 2M
Emitter E3ZM-T61-L 2M
Receiver E3ZM-T61-D 2M
E3ZM-T66
Emitter E3ZM-T66-L
Receiver E3ZM-T66-D
E3ZM-T63 2M
Emitter E3ZM-T63-L 2M
Receiver E3ZM-T63-D 2M
E3ZM-T68
Emitter E3ZM-T68-L
Receiver E3ZM-T68-D
PNP output
E3ZM-T81 2M
Emitter E3ZM-T81-L 2M
Receiver E3ZM-T81-D 2M
E3ZM-T86
Emitter E3ZM-T86-L
Receiver E3ZM-T86-D
E3ZM-T83 2M
Emitter E3ZM-T83-L 2M
Receiver E3ZM-T83-D 2M
E3ZM-T88
Emitter E3ZM-T88-L
Receiver E3ZM-T88-D
E3ZM-R61 2M
E3ZM-R81 2M
E3ZM-R66
E3ZM-R86
E3ZM-D62 2M
E3ZM-D82 2M
E3ZM-D67
E3ZM-D87
E3ZM-LS61H 2M
E3ZM-LS81H 2M
E3ZM-LS66H
E3ZM-LS86H
E3ZM-LS62H 2M
E3ZM-LS82H 2M
E3ZM-LS67H
E3ZM-LS87H
E3ZM-LS64H 2M
E3ZM-LS84H 2M
E3ZM-LS69H
E3ZM-LS89H
4m
*1
Connector (M8, 4 pins)
(100 mm)
(Using E39-R1S)
Pre-wired (2 m) *3
Diffusereflective
1m
Connector (M8, 4 pins)
Pre-wired (2 m) *3
10 to 100 mm
Connector (M8, 4 pins)
BGS
reflective
(fixed
distance)
Pre-wired (2 m) *3
10 to 150 mm
Connector (M8, 4 pins)
Pre-wired (2 m) *3
10 to 200 mm
Connector (M8, 4 pins)
*1. The Reflector is sold separately. Select the Reflector model most suited to the application.
*2. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
*3. Pre-wired Models with a 5-m cable are also available for these products. When ordering, specify the cable length by adding "5M" to the end of the model number
(e.g., E3ZM-LT61 5M).
*4. Through-beam Models are also available with a light emission stop function. When ordering, add "-G0" to the end of the model number (e.g., E3ZM-T61-G0).
*5. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver.
Orders for individual Emitters and Receivers are accepted. (Modifications are required for some models. Ask your OMRON representative for details.)
Accessories (Order Separately)
Reflectors (A Reflector is required for Retro-reflective Sensors: A Reflector is not provided with the Sensor. Be sure to order a Reflector.)
(Refer to Dimensions on E39-L/F39-L/E39-S/E39-R.)
Name
Reflector
Fog Preventive Coating
Small Reflector
Tape Reflector
E3ZM-R
Sensing distance (typical) *
3 m (100 mm) (rated value)
4 m (100 mm) (rated value)
5 m (100 mm)
2.5 m (100 mm)
3.5 m (100 mm)
3 m (100 mm)
1.5 m (50 mm)
700 mm (150 mm)
1.1 m (150 mm)
1.4 m (150 mm)
Model
E39-R1
E39-R1S
E39-R2
E39-R9
E39-R10
E39-R1K
E39-R3
E39-RS1
E39-RS2
E39-RS3
Quantity
Remarks
1
1
1
1
1
1
1
1
1
1
• Reflectors are not provided with Retro-reflective models.
• The MSR function is enabled.
Note: When using a Reflector without a rated value, use 0.7 times typical value as a guideline for the sensing distance.
* Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
3
E3ZM
Mounting Brackets A Mounting Bracket is not enclosed with the Sensor. Order a Mounting Bracket separately if required.
(Refer to Dimensions on E39-L/F39-L/E39-S/E39-R.)
Appearance
Model
(Material)
Quantity
E39-L153
(SUS304)
1
Remarks
Appearance
Model
(Material)
Quantity
E39-L98
(SUS304)
1
E39-L150
(SUS304)
1 set
Remarks
Metal Protective Cover
Bracket *
Mounting Brackets
E39-L104
(SUS304)
1
(Sensor adjuster)
E39-L43
(SUS304)
1
Easily mounted to the
aluminum frame rails of
conveyors and easily
adjusted.
Horizontal Mounting
Bracket *
E39-L142
(SUS304)
1
Horizontal Protective Cover
Bracket *
E39-L44
(SUS304)
1
Rear Mounting Bracket
E39-L151
(SUS304)
1 set
E39-L144
(SUS304)
1
For left to right adjustment
Compact Protective Cover
Bracket *
Note: When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter.
* Cannot be used for Standard Connector models.
Sensor I/O Connectors (Models for Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)
(Refer to Dimensions on XS3.)
Size
Cable
Appearance
Straight *2
M8 (4 pins) *1
Cable type
2m
5m
Standard
L-shaped *2 *3
2m
Model
XS3F-M421-402-A
4-wire
5m
XS3F-M421-405-A
XS3F-M422-402-A
XS3F-M422-405-A
Note: When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter.
*1. Cable specifications: Outer coating material: PVC, Nut material: Stainless steel, Degree of protection: IP67 (IEC 60529)
*2. The connector will not rotate after connecting.
*3. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.
4
E3ZM
Ratings and Specifications
Sensing
method
Model
Item
Through-beam
Retro-reflective with
MSR function
Diffuse-reflective
Models
NPN output
E3ZM-T61
E3ZM-T66
E3ZM-T63
E3ZM-T68
E3ZM-R61
E3ZM-R66
E3ZM-D62
E3ZM-D67
PNP output
E3ZM-T81
E3ZM-T86
E3ZM-T83
E3ZM-T88
E3ZM-R81
E3ZM-R86
E3ZM-D82
E3ZM-D87
Sensing distance
15 m
4 m [100 mm]
(Using E39-R1S)
3 m [100 mm]
(Using E39-R1)
0.8 m
Spot diameter (typical)
Standard sensing object
1m
(White paper
300 × 300 mm)
--Opaque: 12-mm dia. min. Opaque: 2-mm dia. min.
Differential travel
Opaque: 75-mm dia. min.
20% of sensing distance
max.
---
Black/white error
---
--Emitter, Receiver: 3° to 15°
Sensor: 3° to 10°
Reflector: 30°
Light source (wavelength)
Infrared LED (870 nm)
Red LED (660 nm)
Power supply voltage
10 to 30 VDC, including 10% ripple (p-p)
Current consumption
40 mA max.
(Emitter 20 mA max., Receiver 20 mA max.)
Control output
Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 2 V max.)
Open-collector output (NPN/PNP output depending on model)
Light-ON/Dark-ON switch selectable
Protection circuits
Reversed power supply polarity protection, Output
short-circuit protection, and Reversed output polarity
protection
Response time
Operate or reset: 1 ms max.
Sensitivity adjustment
One-turn adjuster
Ambient illumination
(Receiver side)
Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max.
Ambient temperature range
Operating: −25 to 55°C, Storage: −40 to 70°C (with no icing or condensation)
Ambient humidity range
Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance
20 MΩ min. at 500 VDC
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min
Vibration resistance
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
Destruction: 500 m/s2 3 times each in X, Y, and Z directions
Degree of protection *
IEC: IP67, DIN 40050-9: IP69K
Connection method
Pre-wired cable (standard length: 2 m)
M8 4-pin Connector
Indicator
Operation indicator (yellow), Stability indicator (green) (Emitter has only power supply indicator (green).)
Directional angle
Weight
(packed
state)
Pre-wired models
(with 2-m cable)
Approx. 150 g
Connector models Approx. 60 g
Case
SUS316L
Lens
PMMA (polymethylmethacrylate)
Display
PES (polyethersulfone)
Materials Sensitivity
adjustment and
mode selector
switch
Seals
Accessories
--Infrared LED (860 nm)
25 mA max.
Reversed power supply polarity protection, Output
short-circuit protection, Mutual interference prevention, and Reversed output polarity protection
Approx. 90 g
Approx. 40 g
PEEK (polyetheretherketone)
Fluoro rubber
Instruction sheet (Note: Reflectors and Mounting Brackets are sold separately.)
* IP69K Degree of Protection Specifications
IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards.
The test item is sprayed with 80°C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water
is 14 to 16 liters per minute.
The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0°, 30°, 60°, and 90° from
the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.
5
E3ZM
Sensing
method
Model
Item
BGS Reflective Models
NPN output
E3ZM-LS61H
E3ZM-LS66H
E3ZM-LS62H
E3ZM-LS67H
E3ZM-LS64H
E3ZM-LS69H
PNP output
E3ZM-LS81H
E3ZM-LS86H
E3ZM-LS82H
E3ZM-LS87H
E3ZM-LS84H
E3ZM-LS89H
Sensing distance
10 to 100 mm
(White paper 100 × 100 mm)
10 to 150 mm
(White paper 100 × 100 mm)
Spot diameter (typical)
4-mmdia. at sensing distance of 100 12-mm dia. at sensing distance of
mm
150 mm
Standard sensing object
10 to 200 mm
(White paper 100 × 100 mm)
18-mm dia. at sensing distance of
200 mm
---
Differential travel
3% of sensing distance max.
15% of sensing distance max.
20% of sensing distance max.
Black/white error
5% of sensing distance max.
10% of sensing distance max.
20% of sensing distance max.
Directional angle
---
Light source (wavelength)
Red LED (650 nm)
Red LED (660 nm)
Power supply voltage
10 to 30 VDC, including 10% ripple (p-p)
Current consumption
25 mA max.
Control output
Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 2 V max.)
Open-collector output (NPN/PNP output depending on model)
Light-ON/Dark-ON cable connection selectable
Protection circuits
Reversed power supply polarity protection, Output short-circuit protection, Reversed output polarity protection,
Mutual interference protection
Response time
Operate or reset: 1 ms max.
Sensitivity adjustment
---
Ambient illumination
(Receiver side)
Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max.
Ambient temperature range
Operating: −25 to 55°C, Storage: −40 to 70°C (with no icing or condensation)
Ambient humidity range
Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance
20 MΩ min. at 500 VDC
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min
Vibration resistance
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
Destruction: 500 m/s2 3 times each in X, Y, and Z directions
Degree of protection *
IEC: IP67, DIN 40050-9: IP69K
Connection method
Pre-wired cable (standard length: 2 m)
M8 4-pin Connector
Indicator
Operation indicator (yellow), Stability indicator (green)
Weight
(packed
state)
Materials
Pre-wired models (with 2-m ca- Approx. 90 g
ble)
Connector
models
Approx. 40 g
Case
SUS316L
Lens
PMMA (polymethylmethacrylate)
Display
PES (polyethersulfone)
Seals
Accessories
Fluoro rubber
Instruction sheet (Note: Mounting Brackets are sold separately.)
* IP69K Degree of Protection Specifications
IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards.
The test item is sprayed with 80°C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water
is 14 to 16 liters per minute.
The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0°, 30°, 60°, and 90° from
the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.
6
E3ZM
Engineering Data (Typical)
Parallel Operating Range
Through-beam Models
E3ZM-T@1(T@6)
1000
500
100
Distance Y (mm)
Distance Y (mm)
1500
Distance Y (mm)
Retro-reflective Models
E3ZM-R@1(R@6)
E3ZM-T@3(T@8)
80
60
40
150
E39-R1S
100
E39-R1
50
20
Y
0
X
0
X
X
-20
−500
Y
Y
0
−50
-40
-60
−1000
−100
-80
0
5
10
15
20
25
30
35
40
Distance X (m)
140
120
Y
80
X
60
1000
1500
2000
Distance X (mm)
E3ZM-LS@1H(LS@6H), Top to Bottom
Sensing object: 300 × 300 white paper
100
500
−150
0
1
2
3
4
5
6
Distance X (m)
BGS Reflective Models
Distance Y (mm)
Distance Y (mm)
Operating Range
Diffuse-reflective Models
E3ZM-D@2(D@7)
-100
0
40
6
Sensing object:
100 × 100
white paper
4
Y
X
2
E3ZM-LS@1H(LS@6H), Left to Right
Distance Y (mm)
−1500
4
Sensing object: 100 × 100 white paper
3
2
1
20
Y
0
0
0
−20
−40
−60
−2
−80
−4
−100
0.2
0.4
0.6
0.8
1
1.2
Sensing object: 100 × 100 white paper
20
Y
15
10
X
20
40
60
80
100
Distance X (mm)
E3ZM-LS@2H(LS@7H), Left to Right
Distance Y (mm)
Distance Y (mm)
25
−6
0
1.4 1.6 1.8
Distance X (m)
E3ZM-LS@2H(LS@7H), Top to Bottom
−3
6 Sensing object: 100 × 100 white paper
4
2
20
40
60
80
100
Distance X (mm)
E3ZM-LS@4H(LS@9H), Top to Bottom
35
Sensing object: 100 × 100 white paper
30
25
Y
20
15
X
10
5
5
0
0
0
−5
−5
−10
−2
−10
−15
Y
X
−4
−20
−25
−4
0
Distance Y (mm)
−120
−140
0
X
−1
−2
−15
−20
−25
−30
0
20
40
60
80
100
120 140 160
Distance X (mm)
−6
0
20
40
60
80
100
120 140 160
Distance X (mm)
−35
0
50
100
150
200
250
Distance X (mm)
Distance Y (mm)
E3ZM-LS@4H(LS@9H), Left to Right
8
Sensing object: 100 × 100 white paper
6
4
Y
2
X
0
−2
−4
−6
−8
0
50
100
150
200
250
Distance X (mm)
7
E3ZM
Retro-reflective Models
E3ZM-R@1(R@6)
100
50
30
10
5
3
Operating 1
level
0.5
Excess gain ratio (multiple)
E3ZM-T@3(T@8)
Excess gain ratio (multiple)
Excess gain ratio (multiple)
Excess Gain vs. Distance
Through-beam Models
E3ZM-T@1(T@6)
100
10
100
50
30
10
5
E39-R1S
3
E39-R1
Operating 1
level
Operating 1
level
0.5
0.3
0.3
0.1
0
5
10
15
20
25
30
35
0.1
0.1
40 45 50
Distance (m)
0
500
1000
1500
0
2000
2500
Distance (mm)
1
2
3
4
5
6
Distance (m)
Excess gain ratio (multiple)
Diffuse-reflective Models
E3ZM-D@2(D@7)
100
Sensing object: 300 × 300 white paper
50
30
10
5
3
Operating 1
level
0.5
0.3
0.1
0.5
1
1.5
2
2.5
Distance (m)
Spot Diameter vs. Distance
BGS Reflective Models
E3ZM-LS@1H(LS@6H)
Spot diameter (mm)
Distance (m)
Sensing Object Size vs. Distance
Diffuse-reflective Models
E3ZM-D@2(D@7)
1.8
1.6
1.4
1.2
E3ZM-LS@2H/LS@4H(LS@7H/LS@9H)
Spot diameter (mm)
0
12
10
8
20
18
16
14
12
1.0
6
10
0.8
8
4
0.6
6
0.4
d
Sensing object: White paper
4
2
0.2
2
d
0.0
0
100
200
300
400
500 600
Length d of sensing object (mm)
0
0
20
40
60
80
100
Distance (mm)
0
0
50
100
150
200
250
Distance (mm)
8
E3ZM
100
80
E3ZM-LS@4H(LS@9H)
180
Sensing distance (mm)
120
250
Sensing distance (mm)
Sensing distance (mm)
Sensing Distance vs. Sensing Object Material
BGS Reflective Models
E3ZM-LS@1H(LS@6H)
E3ZM-LS@2H(LS@7H)
160
140
120
100
200
150
60
80
100
40
60
40
50
20
20
0
0
Mirror
surface
0
White Veneer Card- Black Black SUS
paper
board paper rubber
Material
50
Upwards and
Downwards
Inclination
angle
40
30
Sensing
object
20
Center
line
+θ
−θ
10
0
50
50
E3ZM-LS@4H(LS@9H)
(Upwards and
Downwards)
Inclination
angle
40
40
30
30
Sensing
object
20
20
Center
line
+θ
−θ
10
10
00
50
50
30
30
−20
−20
−30
−30
−30
−30
−40
−40
−40
−40
−40
−50
−80
−50
−50
−80 −60
−80
−60
(Left and Right)
Inclination
angle
40
40
30
30
Sensing
object
20
20
Center
line
+θ
−θ
10
10
00
−10
−10
−40
−40
−20
−20
00
50
(Left and Right)
Inclination
angle
30
20
Center
line
+θ
−θ
10
0
30
30
−30
−30
−40
−40
−40
−40
−40
−50
−50
−80
−80
−50
−80
60 80
80
60
Inclination angle θ (°)
+θ
−θ
00
−20
−20
40
40
Center
line
10
10
−30
20
20
Sensing
object
20
20
−20
00
20
40
60
20
40
60 80
80
Inclination angle θ (°)
(Left and Right)
Inclination
angle
40
40
−30
−30
−20
−20
00
−10
−10
−10
−40
−40
−20
−20
50
50
−20
−20
−60
−60
−40
−40
E3ZM-LS@4H(LS@9H)
40
Sensing
object
−50
−50
−80
−80 −60
−60
20
40
60 80
80
20
40
60
Inclination angle θ (°)
E3ZM-LS@2H(LS@7H)
Sensing distance variation (%)
50
50
−10
−10
Sensing distance variation (%)
20
40
60 80
Inclination angle θ (°)
+θ
+θ
00
−20
−20
0
Center
line
10
10
−30
−20
Sensing
object
20
20
−20
−40
(Upwards and
Downwards)
Inclination
angle
40
40
−10
−10
Inclination Characteristics (Horizontal)
BGS Reflective Models
E3ZM-LS@1H(LS@6H)
Sensing distance variation (%)
E3ZM-LS@2H(LS@7H)
Mirror
surface
Material
−10
−60
White Veneer Card- Black Black SUS
paper
board paper rubber
Material
Sensing distance variation (%)
Sensing distance variation (%)
Inclination Characteristics (Vertical)
BGS Reflective Models
E3ZM-LS@1H(LS@6H)
Mirror
surface
Sensing distance variation (%)
White Veneer Card- Black Black SUS
paper
board paper rubber
−60
−40
−20
0
20
40
60 80
Inclination angle θ (°)
−50
−50
−80
−80
−60
−60
−40
−40
−20
−20
00
20
40
60 80
80
20
40
60
Inclination angle θ (°)
9
E3ZM
I/O Circuit Diagrams
NPN Output
Model
Operation
mode
Light-ON
E3ZM-T61*
E3ZM-T63*
E3ZM-T66*
E3ZM-T68*
E3ZM-R61
E3ZM-R66
E3ZM-D62
E3ZM-D67
Dark-ON
Operation
selector
Timing charts
Light incident
Light interrupted
Operation indicator ON
(yellow)
OFF
ON
Output transistor
OFF
Operate
Load
(e.g., relay)
Reset
L side
(LIGHT ON)
Through-beam Receivers, Retro-reflective Models,
Diffuse-reflective Models
Operation
indicator
(Yellow)
(Between brown
and black leads)
Light incident
Light interrupted
Operation indicator ON
(yellow)
OFF
ON
Output transistor
OFF
Operate
Load
(e.g., relay)
Reset
Output circuit
Brown
Stability
indicator
(Green)
(Control
output)
Photoelectric
Sensor
Main
Circuit
D side
(DARK ON)
10 to 30 VDC
1
Load
(Relay)
100 mA
max.
4
Black
ZD
Blue
3
0V
(Between brown
and black leads)
Through-beam Emitter
Brown
Power
indicator
(green)
1
Photoelectric
Sensor
Main
Circuit
10 to 30 VDC
Blue
3
Through-beam Emitter
E3ZM-T61-G0*
E3ZM-T63-G0*
E3ZM-T66-G0*
E3ZM-T68-G0*
Light emission
stop function
---
ON
OFF
Power indicator (Green) Brown 10 to 30 VDC
(Between blue (3)
and pink (2) leads)
1
---
ON
OFF
ON
Indicator (green)
OFF
Photoelectric
Sensor
Main
Circuit
Emitter LED
Pink
2
(Light emission
stop input)
Blue
0V
3
NEAR
FAR
Operation indicator ON
(yellow)
OFF
Light-ON
E3ZM-LS61H
E3ZM-LS66H
E3ZM-LS62H
E3ZM-LS67H
E3ZM-LS64H
E3ZM-LS69H
Output transistor
Load
(e.g., relay)
Connect
pink lead
(2) to brown
lead (1).
ON
OFF
Operate
Reset
(Between brown
and black leads)
NEAR
FAR
Operation indicator ON
(yellow)
OFF
Dark-ON
Output transistor
Load
(e.g., relay)
ON
OFF
Operate
Reset
(Between brown
and black leads)
Connect
pink lead
(2) to blue
lead (3) or
leave open.
Operation
indicator
(Yellow)
Stability
indicator
(Green)
Photoelectric
Sensor
Main
Circuit
1
Brown
10 to 30 VDC
Light-ON
4
Load
(Relay)
Black
100 mA max.
(Control output)
ZD
3
2
Blue
0V
Pink
Dark-ON
* Models numbers for Through-beam Sensors (E3ZM-T@@(-G0)) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3ZM-T61-L 2M, E3ZM-T61-G0-L 2M), the model number of the
Receiver, by adding "-D" (example: E3ZM-T61-D 2M, E3ZM-T61-G0-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
10
E3ZM
PNP Output
Operation
mode
Model
Light-ON
Operation
selector
Timing charts
Light incident
Light interrupted
Operation indicator ON
(yellow)
OFF
ON
Output transistor
OFF
Operate
Load
(e.g., relay)
Reset
Output circuit
L side
(LIGHT ON)
Through-beam Receivers, Retro-reflective Models,
Diffuse-reflective Models
Operation
indicator
(Yellow)
(Between blue
and black leads)
E3ZM-T81*
E3ZM-T83*
E3ZM-T86*
E3ZM-T88*
E3ZM-R81
E3ZM-R86
E3ZM-D82
E3ZM-D87
Dark-ON
Photoelectric
Sensor
Main
Circuit
Light incident
Light interrupted
Operation indicator ON
(yellow)
OFF
ON
Output transistor
OFF
Load
Operate
(e.g., relay)
Reset
10 to 30 VDC
Brown
Stability
indicator
(Green)
1
ZD
Black
4
(Control
output)
100 mA
max.
Load
(Relay)
3
D side
(DARK ON)
0V
Blue
(Between blue
and black leads)
Through-beam Emitter
Brown
Power
indicator
(Green)
1
Photoelectric
Sensor
Main
Circuit
10 to 30 VDC
Blue
3
Through-beam Emitter
Light emission
stop function
E3ZM-T81-G0*
E3ZM-T83-G0*
E3ZM-T86-G0*
E3ZM-T88-G0*
---
ON
OFF
(Between brown (1)
and pink (2) leads)
Power indicator (Green) Brown 10 to 30 VDC
1
---
ON
Emitter LED
OFF
ON
Indicator (green)
OFF
Photoelectric
Sensor
Main
Circuit
(Light emission
stop input)
Pink
2
Blue
0V
3
NEAR
FAR
Operation indicator ON
(yellow)
OFF
Light-ON
Output transistor
Load
(e.g., relay)
E3ZM-LS81H
E3ZM-LS86H
E3ZM-LS82H
E3ZM-LS87H
E3ZM-LS84H
E3ZM-LS89H
Connect
pink lead
(2) to brown
lead (1).
ON
OFF
Operate
Reset
Operation
indicator
(Yellow)
Stability
indicator
(Green)
(Between blue
and black leads)
NEAR
FAR
Operation indicator ON
OFF
(yellow)
Dark-ON
Output transistor
Load
(e.g., relay)
Photoelectric
Sensor
Main
Circuit
ON
OFF
Operate
Reset
(Between blue
and black leads)
Connect
pink lead
(2) to blue
lead (3) or
leave open.
1
Brown
10 to 30 VDC
Light-ON
ZD
Black
100 mA max.
(Control output)
4
Blue
Load
(Relay)
3
2
0V
Pink
Dark-ON
* Models numbers for Through-beam Sensors (E3ZM-T@@(-G0)) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3ZM-T81-L 2M, E3ZM-T81-G0-L 2M), the model number of the
Receiver, by adding "-D" (example: E3ZM-T81-D 2M, E3ZM-T81-G0-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
Connector Pin Arrangement
M8 Connector (-CN)/M8 Pre-wired Connector
M8 Pre-wired 3-pin Connector
M8 4-pin Connector Pin Arrangement
2
1
M8 3-pin Connector Pin Arrangement
4
4
3
1
3
Plugs (Sensor I/O Connectors)
M8 4-pin Connectors
4
3
2
1
Wire color
Brown
White
Blue
Black
1
2
3
4
XS3F-E421-402-A
XS3F-E421-405-A
XS3F-E422-402-A
XS3F-E422-405-A
11
E3ZM
Nomenclature
Sensors with Sensitivity Adjustment and
Mode Selector Switch
Through-beam Models
E3ZM-T@@-D (Receiver)
Infinite Adjustment Emitter
BGS Reflective Models
E3ZM-LS@@H
Through-beam Models
E3ZM-T@@-L (Emitter)
Retro-reflective Models
E3ZM-R@@
Diffuse-reflective Models
E3ZM-D@@
Stability indicator
(Green)
Operation indicator
(Yellow)
Sensitivity adjuster
Stability indicator
(Green)
or Emitter
power supply indicator
(Green)
Operation indicator
(Yellow)
Note:
Emitter: No indicator
Operation selector
12
E3ZM
Safety Precautions
Refer to Warranty and Limitations of Liability.
WARNING
This product is not designed or rated for ensuring
safety of persons. Do not use it for such a purpose.
Load
Do not use a load that exceeds the rated load.
Low-temperature Environments
Do not touch the metal surface with your bare hands when the
temperature is low. Touching the surface may result in a cold burn.
CAUTION
Do not use the product with voltage in excess of the
rated voltage. Excess voltage may result in
malfunction or fire.
Never use the product with an AC power supply.
Otherwise, explosion may result.
Rotation Torque for Sensitivity Adjustment and Selector
Switch
Adjust with a torque of 0.06 N·m or less.
Oily Environments
Do not use the Sensor in oily environments.
Modifications
Do not attempt to disassemble, repair, or modify the Sensor.
When cleaning the product, do not apply a
concentrated spray of water to one part of the
product. Otherwise, parts may become damaged and
the degree of protection may be degraded.
High-temperature environments may result in burn
injury.
Precautions for Safe Use
The following precautions must be observed to ensure safe operation
of the Sensor.
Operating Environment
Do not use the Sensor in an environment where explosive or
flammable gas is present.
Outdoor Use
Do not use the Sensor in locations subject to direct sunlight.
Cleaning
Do not use thinner, alcohol, or other organic solvents. Otherwise, the
optical properties and degree of protection may be degraded.
Washing
Do not use highly concentrated detergents. They may cause
malfunction. Do not use high-pressure water spray in excess of the
specifications.
Surface Temperature
Burn injury may occur. The Sensor surface temperature rises
depending on application conditions, such as the surrounding
temperature and the power supply voltage. Use caution when
operating or washing the Sensor.
Connecting Connectors
Be sure to hold the connector cover when inserting or removing the
connector.
If the XS3F is used, always tighten the connector cover by hand. Do
not use pliers.
If the tightening is insufficient, the degree of protection will not be
maintained and the Sensor may become loose due to vibration. The
appropriate tightening torque is 0.3 to 0.4 N·m.
If other commercially available connectors are used, follow the
recommended connector application conditions and recommended
tightening torque specifications.
13
E3ZM
Precautions for Correct Use
Do not install the Sensor in the following locations.
(1)Locations subject to direct sunlight
(2)Locations subject to condensation due to high humidity
(3)Locations subject to corrosive gas
(4)Locations where the Sensor may receive direct vibration or shock
Connecting and Mounting
(1)The maximum power supply voltage is 30 VDC. Before turning the
power ON, make sure that the power supply voltage does not
exceed the maximum voltage.
(2)Laying Sensor wiring in the same conduit or duct as high-voltage
wires or power lines may result in malfunction or damage due to
induction. As a general rule, wire the Sensor in a separate conduit
or use shielded cable.
(3)Use an extension cable with a minimum thickness of 0.3 mm2 and
less than 100 m long.
(4)Do not pull on the cable with excessive force.
(5)Pounding the Photoelectric Sensor with a hammer or other tool
during mounting will impair water resistance. Also, use M3
screws.
(6)Mount the Sensor either using the bracket (sold separately) or on
a flat surface.
(7)Be sure to turn OFF the power supply before inserting or removing
the connector.
Cleaning
Never use thinner or other solvents. Otherwise, the Sensor surface
may be dissolved.
Power Supply
If a commercial switching regulator is used, ground the FG (frame
ground) terminal.
Load Short-circuit Protection
This Sensor is equipped with load short-circuit protection, but be sure
to not short circuit the load. Be sure to not use an output current flow
that exceeds the rated current. If a load short circuit occurs, the output
will turn OFF, so check the wiring before turning ON the power supply
again. The short-circuit protection circuit will be reset. The load shortcircuit protection will operate when the current flow reaches 1.8 times
the rated load current. When using a C load, use an inrush current of
1.8 times the rated load current or higher.
Water Resistance
Do not use the Sensor in water, rainfall, or outdoors.
When disposing of the Sensor, treat it as industrial waste.
Mounting Diagram
Mounting Bracket
(sold separately)
E39-L104
Use a mounting torque of
0.5 N·m max.
Resistance to Detergents, Disinfectants, and Chemicals
• Performance is assured for typical detergents and disinfectants, but
performance may not be maintained for some detergents and
disinfectants. Refer to the following table when using these agents.
• The E3ZM passed testing for resistance to detergents and
disinfectants performed using the items in the following table. Refer
to this table when considering use of detergents and disinfectants.
Category
Power Supply Reset Time
The Sensor will be able to detect objects 100 ms after the power
supply is tuned ON. Start using the Sensor 100 ms or more after
turning ON the power supply. If the load and the Sensor are
connected to separate power supplies, be sure to turn ON the Sensor
first.
Turning OFF the Power Supply
Output pulses may be generated even when the power supply is OFF.
Therefore, it is recommended to first turn OFF the power supply for
the load or the load line.
Chemical
Concentration
Temperature
Time
Sodium hydroxide (NaOH)
1.5%
70°C
240h
Potassium hydroxide (KOH)
1.5%
70°C
240h
Phosphoric acid (H3PO4)
2.5%
70°C
240h
Product name
Sodium hypochlorite (NaCIO)
0.3%
25°C
240h
Hydrogen peroxide (H2O2)
6.5%
25°C
240h
Alkaline foam
detergent
P3-topax-66s
(Manufactured by Ecolab)
3.0%
70°C
240h
Acidic foam
detergent
P3-topax-56
(Manufactured by Ecolab)
5.0%
70°C
240h
P3-oxonia active 90
(Manufactured by Ecolab)
1.0%
25°C
240h
TEK121
(Manufactured by ABC Compounding)
1.1%
25°C
240h
Disinfectant
Note: The Sensor was immersed in the chemicals, detergents, and
disinfectants listed above at the temperatures in the table for 240 hours
and then passed an insulation resistance of 100 MΩ min.
14
E3ZM
(Unit: mm)
Dimensions
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Sensors
Through-beam Models*
Pre-wired Models
E3ZM-T61(-G0)
E3ZM-T81(-G0)
E3ZM-T63(-G0)
E3ZM-T83(-G0)
Emitter
Power indicator (green)
10.8
21
3
1.2
2.8
12.7
31
25.4
Emitter
6.4 dia.
Two, M3
4 dia. vinyl-insulated round cable with 2 or 3 conductors (Conductor
cross section: 0.2 mm2 (AWG24), Insulator diameter: 1.1 mm),
Standard lengths: 2 m
11.6
Receiver
4.5
Operation Indicator (yellow)
Operation selector
Stability indicator (green)
Sensitivity adjuster
10.8
21
3
1.2
2.8
12.7
31
25.4
Receiver
6.4 dia.
Two, M3
4 dia. vinyl-insulated round cable with 3 conductors (Conductor
cross section:0.2 mm2 (AWG24), Insulator diameter:1.1 mm),
Standard length: 2 m
Through-beam Models*
Standard Connector
E3ZM-T66(-G0)
E3ZM-T86(-G0)
E3ZM-T68(-G0)
E3ZM-T88(-G0)
Emitter
Power indicator (green)
10.8
21
2.8
12.7
31
Emitter
6.4 dia.
4
1
3
Terminal No.
1
3
1.2
2
2
3
4
25.4
Specifications
+V
Light emission stop
input (-G0 only)
0V
---
Two, M3
7
M8× 1
Receiver
11.6
4.5
Operation Indicator (yellow)
Operation selector
Stability indicator (green)
Sensitivity adjuster
10.8
4
1
3
Terminal No.
1
2
3
4
21
3
1.2
2
2.8
Specifications
+V
--0V
Output
12.7
31
7
Receiver
6.4 dia.
25.4
Two, M3
M8× 1
* Models numbers for Through-beam Sensors (E3ZM-T@@(-G0)) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3ZM-T61-L 2M, E3ZM-T61-G0-L 2M), the model number of the
Receiver, by adding "-D" (example: E3ZM-T61-D 2M, E3ZM-T61-G0-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
15
E3ZM
Retro-reflective Models
Pre-wired Models
E3ZM-R61
E3ZM-R81
11.6
4.5
Operation Indicator (yellow)
Operation selector*
Stability indicator (green)
Diffuse-reflective Models
Standard Connector
E3ZM-D62
E3ZM-D82
BGS Reflective Models
Pre-wired Models
E3ZM-LS61H
E3ZM-LS62H
E3ZM-LS64H
E3ZM-LS81H
E3ZM-LS82H
E3ZM-LS84H
10.8
1.2
31
21
Receiver
6.4 dia.
3
2.8
16.2
25.4
7
Emitter
6.4 dia.
Two, M3
4 dia. vinyl-insulated round cable with 3 conductors (Conductor
cross section:0.2 mm2 (AWG24), Insulator diameter:1.1 mm),
Standard length: 2 m
Retro-reflective Models
Standard Connector
E3ZM-R66
E3ZM-R86
11.6
Diffuse-reflective Models
Standard Connector
E3ZM-D67
E3ZM-D87
4.5
Operation Indicator (yellow)
Operation selector*
Stability indicator (green)
Sensitivity adjuster*
*No sensitivity adjuster and operation
selector with BGS reflective model
10.8
BGS Reflective Models
Standard Connector
E3ZM-LS66H
E3ZM-LS67H
E3ZM-LS69H
E3ZM-LS86H
E3ZM-LS87H
E3ZM-LS89H
Sensitivity adjuster*
*No sensitivity adjuster and operation
selector with BGS reflective model
1.2
31
Receiver
6.4 dia.
2.8
16.2
7
25.4
Emitter
6.4 dia.
7
2
4
1
3
21
3
Two, M3
Terminal No.
1
2
3
4
Specifications
+V
--0V
Output
M8× 1
16
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,
catalogs, manuals, brochures and other documents, whether electronic or in
writing, relating to the sale of products or services (collectively, the "Products")
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron
objects to any terms or conditions proposed in Buyer’s purchase order or other
documents which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices
on any unshipped portions of outstanding orders. Payments for Products are
due net 30 days unless otherwise stated in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices
sent to Buyer after deducting transportation charges, taxes and duties, and will
be allowed only if (i) the invoice is paid according to Omron’s payment terms
and (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or
the maximum legal rate, whichever is less, on any balance not paid within the
stated terms.
5. Orders. Omron will accept no order less than $200 net billing.
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the importation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Omron or required to be collected directly or
indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs
duties and sales, excise, use, turnover and license taxes) shall be charged to
and remitted by Buyer to Omron.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Omron, Omron reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all
amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all
unpaid accounts.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:
a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall
constitute delivery to Buyer;
c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall
pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid;
d. Delivery and shipping dates are estimates only; and
e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions.
12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Omron within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products
from Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Omron (or such other period expressed
in writing by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
14.
15.
16.
17.
18.
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Omron further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying
Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding
the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing,
are not to be construed as an amendment or addition to the above warranty.
See http://www.omron247.com or contact your Omron representative for published information.
Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual
price of the Product on which liability is asserted.
Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
their employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim
that any Product made to Buyer specifications infringed intellectual property
rights of another party.
Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it
in any way without the written permission of Omron. Notwithstanding any
charges to Buyer for engineering or tooling, all engineering and tooling shall
remain the exclusive property of Omron. All information and materials supplied
by Omron to Buyer relating to the Products are confidential and proprietary,
and Buyer shall limit distribution thereof to its trusted employees and strictly
prevent disclosure to any third party.
Export Controls. Buyer shall comply with all applicable laws, regulations and
licenses regarding (i) export of products or information; (iii) sale of products to
“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
regulated technology or information.
Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
and no course of dealing between Buyer and Omron shall operate as a waiver
of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
without Omron's written consent. (c) Law. These Terms are governed by the
law of the jurisdiction of the home office of the Omron company from which
Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between
Buyer and Omron relating to the Products, and no provision may be changed
or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate
any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice. (g) Definitions. As used
herein, “including” means “including without limitation”; and “Omron Companies” (or similar words) mean Omron Corporation and any direct or indirect
subsidiary or affiliate thereof.
Certain Precautions on Specifications and Use
1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of the
Product in the Buyer’s application or use of the Product. At Buyer’s request,
Omron will provide applicable third party certification documents identifying
ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application
or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases but the following is a
non-exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations.
(iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
2.
3.
4.
5.
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products. Omron Companies shall not be responsible for the
user’s programming of a programmable Product, or any consequence thereof.
Performance Data. Data presented in Omron Company websites, catalogs
and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s
test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations
of Liability.
Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Omron’s representative at any time
to confirm actual specifications of purchased Product.
Errors and Omissions. Information presented by Omron Companies has been
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors or omissions.
OMRON INDUSTRIAL AUTOMATION • THE AMERICAS HEADQUARTERS
Schaumburg, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com
OMRON CANADA, INC. • HEAD OFFICE
Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com
OMRON ARGENTINA • SALES OFFICE
Cono Sur • 54.11.4783.5300
OMRON ELECTRONICS DE MEXICO • HEAD OFFICE
México DF • 52.55.59.01.43.00 • 001.800.556.6766 • mela@omron.com
OMRON CHILE • SALES OFFICE
Santiago • 56.9.9917.3920
OMRON ELECTRONICS DE MEXICO • SALES OFFICE
Apodaca, N.L. • 52.81.11.56.99.20 • 001.800.556.6766 • mela@omron.com
OTHER OMRON LATIN AMERICA SALES
54.11.4783.5300
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br
Omron Europe B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • Tel: +31 (0) 23 568 13 00
Fax: +31 (0) 23 568 13 88 • www.industrial.omron.eu
Cat. No. CSM_E3ZM_DS_E_5_4
12/10
Note: Specifications are subject to change.
© 2012 Omron Electronics LLC
Printed in U.S.A.
工商网监
湘ICP备2023018690号
