E5DC-CX2DSM-015

Digital Temperature Controller E5DC (22.5 mm Wide, and DIN Track-mounting Type) The E5DC Mounts to DIN Track and Is Ideal for Connections to HMIs and PLCs. It provides the Same Easy Operation and Advanced Performance as the Rest of the E5@C Series. • A slim body at 85 × 22.5 mm (D × W) that fits into narrow control panels and mounts to DIN Track. • Removable terminal block for easy replacement to simplify maintenance. • High-speed sampling at 50 ms for applications with high-speed temperature increases. • Easy connections to a PLC with programless communications. • Set up the Controller without wiring the power supply by connecting to the computer with a Communications Conversion Cable (sold separately). Setup is easy with the CX-Thermo (sold separately). • Models are available with up to 2 auxiliary outputs and 1 event input to complete basic functions. • A white PV display (height: 8.5 mm) is easy to read when setting up, checking alarms, and making settings in a control panel. 22.5 mm Wide, and DIN Track-mounting Type E5DC Refer to your OMRON website for the most recent information on applicable safety standards. Refer to Safety Precautions on page 54. Main I/O Functions Sensor Input Universal input • Thermocouple • Pt • Analog current/voltage E5DC Dual displays: PV/SV Control Output 1 • Relay output • Voltage output (for driving SSR) • Linear current output Indication Accuracy • Thermocouple input: ±0.3% of PV • Pt input: ±0.2% of PV • Analog input: ±0.2% of FS Auxiliary Outputs • None •2 Sampling Period • 50 ms Event Inputs • None •1 Serial Communications • None • RS-485 4-digit displays • PF (shift) Key • Temperature status display • Simple programming • Independent heating and cooling PID control • Changed parameter display • Display brightness setting This datasheet is provided as a guideline for selecting products. Be sure to refer to the following manuals for application precautions and other information required for operation before attempting to use the product. E5@C Digital Temperature Controllers User’s Manual (Cat. No. H174) E5@C Digital Temperature Controllers Communications Manual (Cat. No. H175) 1 E5DC Model Number Legend and Standard Models Model Number Legend ●Models with Screw Terminals E5DC-@@ @ @ @ @ -@@@ (Example: E5DC-RX0ASM-015) −− − − − − −−− A B C D E F A Model B No. of Control auxiliary output 1 outputs C Power supply voltage D E F Terminal type Input type Options E5DC RX QX CX 0 2 A D S M *1 *2 *3 *4 *2 *1 *2 *3 *4 *5 000 002 015 016 017 Meaning 22.5 mm wide and mounts to DIN Track Control output 1 Relay output Voltage output (for driving SSR) Linear current output *5 None 2 (one common) 100 to 240 VAC 24 VAC/DC Screw terminals Universal input HB alarm and HS alarm Communications Event input ------1 RS-485 ----RS-485 ------1 1 --1 Option 000 can be selected only if two auxiliary outputs are selected. Options 002 and 017 can be selected only if the control output is a relay output or voltage output and two auxiliary outputs are selected. Option 015 cannot be selected if the control output is a relay output or voltage output and two auxiliary outputs are selected. Options 016 can be selected only if the control output is a linear current output and two auxiliary outputs are selected. The control output cannot be used as a transfer output. List of Models Options Control output No. of auxiliary outputs --- Relay output 2 --- Voltage output (for driving SSR) 2 HB alarm and HS alarm --Detection for singlephase heater --Detection for singlephase heater No. of event inputs Communications --1 --1 --Linear current output 2 --- --1 Model Model Power supply voltage Power supply voltage 100 to 240 VAC 24 VAC/DC RS-485 E5DC-RX0ASM-015 E5DC-RX0DSM-015 --- E5DC-RX2ASM-000 E5DC-RX2DSM-000 RS-485 E5DC-RX2ASM-002 E5DC-RX2DSM-002 --- E5DC-RX2ASM-017 E5DC-RX2DSM-017 RS-485 E5DC-QX0ASM-015 E5DC-QX0DSM-015 --- E5DC-QX2ASM-000 E5DC-QX2DSM-000 RS-485 E5DC-QX2ASM-002 E5DC-QX2DSM-002 --- E5DC-QX2ASM-017 E5DC-QX2DSM-017 RS-485 E5DC-CX0ASM-015 E5DC-CX0DSM-015 --- E5DC-CX2ASM-000 E5DC-CX2DSM-000 RS-485 E5DC-CX2ASM-015 E5DC-CX2DSM-015 --- E5DC-CX2ASM-016 E5DC-CX2DSM-016 Note: These products are sold as a set with a terminal block (i.e., Terminal Unit). Heating and Cooling Control ●Using Heating and Cooling Control A Control Output Assignment An auxiliary output is used as the cooling control output. B Control If PID control is used, you can set PID control separately for heating and cooling. This allows you to handle control systems with different heating and cooling response characteristics.  E5DC Optional Products (Order Separately) USB-Serial Conversion Cable End Plate Model E58-CIFQ2 Model PFP-M Conversion Cable Spacer Model E58-CIFQ2-E Model PFP-S Note: Always use this product together with the E58-CIFQ2. This Cable is used to connect to the front-panel Setup Tool port. DIN Tracks Model PFP-100N PFP-50N Current Transformers (CTs) Hole diameter 5.8 mm 12.0 mm Model E54-CT1 E54-CT3 Unit Labels Model Y92S-L2 Mounting Adapters Model Y92F-53 End Cover Model Y92F-54 Short Bars Model Y92S-P11 CX-Thermo Support Software Model EST2-2C-MV4 Note: CX-Thermo version 4.6 or higher is required for the E5DC. For the system requirements for the CX-Thermo, refer to information on the EST2-2C-MV4 on the OMRON website (www.ia.omron.com).  E5DC Specifications Ratings Power supply voltage Operating voltage range Power consumption Sensor input Input impedance Control method Relay output Control output Auxiliary outputs Voltage output (for driving SSR) Linear current output Number of outputs Output specifications Number of inputs Event inputs External contact input specifications Setting method Indication method Multi SP Bank switching Other functions Ambient operating temperature Ambient operating humidity Storage temperature Altitude Recommended fuse Installation environment A in model number: 100 to 240 VAC, 50/60 Hz D in model number: 24 VAC, 50/60 Hz; 24 VDC 85% to 110% of rated supply voltage 4.9 VA max. at 100 to 240 VAC, and 2.8 VA max. at 24 VDC or 1.5 W max. at 24 VDC Temperature input Thermocouple: K, J, T, E, L, U, N, R, S, B, W, or PL II Platinum resistance thermometer: Pt100 or JPt100 Infrared temperature sensor (ES1B): 10 to 70°C, 60 to 120°C, 115 to 165°C, or 140 to 260°C Analog input Current input: 4 to 20 mA or 0 to 20 mA Voltage input: 1 to 5 V, 0 to 5 V, or 0 to 10 V Current input: 150 Ω max., Voltage input: 1 MΩ min. (Use a 1:1 connection when connecting the ES2-HB/ THB.) ON/OFF control or 2-PID control (with auto-tuning) SPST-NO, 250 VAC, 3 A (resistive load), electrical life: 100,000 operations, minimum applicable load: 5 V, 10 mA Output voltage 12 VDC ±20% (PNP), max. Load current: 21 mA, with short-circuit protection circuit 4 to 20 mA DC/0 to 20 mA DC, load: 500 Ω max., resolution: Approx. 10,000 2 (depends on model) SPST-NO relay outputs: 250 VAC, 2 A (resistive load), Electrical life: 100,000 operations, Minimum applicable load: 10 mA at 5 V 1 (depends on model) Contact input ON: 1 kΩ max., OFF: 100 kΩ min. Non-contact input ON: Residual voltage 1.5 V max.; OFF: Leakage current 0.1 mA max. Current flow: approx. 7 mA per contact Digital setting using front panel keys 11-segment digital displays and individual indicators Character height: PV: 8.5 mm, SV: 8.0 mm Up to eight set points (SP0 to SP7) can be saved and selected using the event inputs, key operations, or serial communications.* None Manual output, heating/cooling control, loop burnout alarm, SP ramp, other alarm functions, heater burnout (HB) alarm (including SSR failure (HS) alarm), 40% AT, 100% AT, MV limiter, input digital filter, self tuning, robust tuning, PV input shift, run/stop, protection functions, extraction of square root, MV change rate limit, simple calculations, temperature status display, simple programming, moving average of input value, and display brightness setting −10 to 55°C (with no condensation or icing), for 3-year warranty: −10 to 50°C (with no condensation or icing) 25% to 85% −25 to 65°C (with no condensation or icing) 2,000 m max. T2A, 250 VAC, time lag, low shut-off capacity Installation Category II, Pollution Class 2 (IEC 61010-1 compliant) * Only two set points are selectable for event inputs.  E5DC Input Ranges ●Thermocouple/Platinum Resistance Thermometer (Universal inputs) Sensor type Platinum resistance thermometer Sensor specification Pt100 Infrared temperature sensor Thermocouple JPt100 K J T E L U N R S B W PLII 10 to 70°C 60 to 120°C 115 to 165°C 120 165 140 to 260°C 2300 2300 1800 1800 1700 1700 1700 Temperature range (°C) 1600 1500 1400 1300 1300 1300 1300 1200 1100 1000 900 850 850 850 800 700 600 600 500.0 500 500.0 500.0 400.0 400 400 400.0 400 400.0 260 300 200 100.0 100 Set value 90 100 0.0 -100 -200 100.0 -200 -199.9 0 1 0.0 -199.9 2 3 -20.0 -100 -20.0 6 7 8 -200 4 5 0 0 16 17 0 0 0 0 0 0 19 20 21 22 23 24 -100 -200 -199.9 -200 9 10 11 -200 -199.9 -200 12 13 14 15 18 Shaded settings are the default settings. The applicable standards for the input types are as follows: K, J, T, E, N, R, S, B: JIS C 1602-1995, IEC 60584-1 L: Fe-CuNi, DIN 43710-1985 U: Cu-CuNi, DIN 43710-1985 W: W5Re/W26Re, ASTM E988-1990 JPt100: JIS C 1604-1989, JIS C 1606-1989 Pt100: JIS C 1604-1997, IEC 60751 PL II: According to Platinel II electromotive force charts from BASF (previously Engelhard) ●Analog input Input type Input specification Setting range Set value Current Voltage 4 to 20 mA 0 to 20 mA 1 to 5 V 0 to 5 V Usable in the following ranges by scaling: -1999 to 9999, -199.9 to 999.9, -19.99 to 99.99 or -1.999 to 9.999 25 26 27 28 0 to 10 V 29  E5DC Alarm Types Each alarm can be independently set to one of the following 17 alarm types. The default is 2: Upper limit. (See note.) Auxiliary outputs are allocated to alarms. ON delays and OFF delays (0 to 999 s) can also be specified. Note: In the default settings for models with HB or HS alarms, alarm 1 is set to a heater alarm (HA) and the Alarm Type 1 parameter is not displayed. To use alarm 1, set the output assignment to alarm 1. Set value Alarm type 0 Alarm function OFF 1 Upper- and lower-limit *1 2 Upper-limit (default) 3 Lower-limit 4 Upper- and lower-limit range *1 5 6 7 8 9 10 11 Alarm output operation Description of function When alarm value X When alarm value X is positive is negative Output OFF No alarm Set the upward deviation in the set point for the alarm upper L H limit (H) and the lower deviation in the set point for the alarm ON *2 OFF PV lower limit (L). The alarm is ON when the PV is outside this SP deviation range. Set the upward deviation in the set point by setting the alarm X X ON ON value (X). The alarm is ON when the PV is higher than the OFF PV OFF PV SP SP SP by the deviation or more. Set the downward deviation in the set point by setting the X X ON ON alarm value (X). The alarm is ON when the PV is lower than OFF PV OFF PV SP SP the SP by the deviation or more. Set the upward deviation in the set point for the alarm upper L H limit (H) and the lower deviation in the set point for the alarm ON *3 OFF PV lower limit (L). The alarm is ON when the PV is inside this deSP viation range. Upper- and lower-limit with standby sequence *1 *5 Upper-limit with standby sequence Lower-limit with standby sequence ON OFF Absolute-value upper-limit ON OFF Absolute-value lower-limit ON OFF Absolute-value upper-limit with standby sequence ON OFF Absolute-value lower-limit with standby sequence ON OFF LBA (alarm 1 type only) PV change rate alarm 14 SP absolute-value upper-limit alarm ON OFF SP absolute-value lower-limit alarm ON OFF H X SP PV ON OFF PV ON OFF PV ON OFF PV ON OFF PV ON OFF PV ON OFF X SP X 0 X 0 X 0 X 0 ON OFF MV absolute-value upper-limit alarm *9 X ON OFF A standby sequence is added to the upper-limit alarm (2). *6 PV A standby sequence is added to the lower-limit alarm (3). *6 X SP X 0 PV X 0 PV X 0 PV X 0 PV 0 ON OFF SP ON OFF X 0 The alarm will turn ON if the process value is smaller than the alarm value (X) regardless of the set point. A standby sequence is added to the absolute-value upperlimit alarm (8). *6 A standby sequence is added to the absolute-value lowerlimit alarm (9). *6 X 0 SP X 0 SP This alarm type turns ON the alarm when the set point (SP) is higher than the alarm value (X). This alarm type turns ON the alarm when the set point (SP) is lower than the alarm value (X). Standard Control X MV 0 The alarm will turn ON if the process value is larger than the alarm value (X) regardless of the set point. ON OFF X 0 MV X MV 0 Standard Control X MV 0 Always ON ON OFF X 0 MV This alarm type turns ON the alarm when the manipulated Heating/Cooling Heating/Cooling variable (MV) is lower than the alarm value (X). Control (Cooling MV) Control (Cooling MV) ON OFF  PV *7 *8 SP Standard Control 17 SP This alarm type turns ON the alarm when the manipulated Heating/Cooling Heating/Cooling variable (MV) is higher than the alarm value (X). Control (Heating MV) Control (Heating MV) ON OFF MV absolute-value lower-limit alarm *9 X - Standard Control 16 A standby sequence is added to the upper- and lower-limit alarm (1). *6 *4 PV SP ON OFF 12 13 15 L ON OFF X 0 MV Always ON E5DC *1 With set values 1, 4, and 5, the upper- and lower-limit values can be set independently for each alarm type, and are expressed as “L” and “H.” *2 Set value: 1, Upper- and lower-limit alarm Case 3 (Always OFF) Case 2 Case 1 H0, L