EE-2002

EE-2001/2002 NPN to PNP Conversion Connector for Amplified Photomicrosensors H Converts NPN output to PNP output by easy connection to amplified photomicrosensors H Easy solution to achieve PNP output as required in the U.S. and Europe Ordering Information Applicable amplified photomicrosensor models Part number EE-SPX301 EE-SPY302 EE-SPZ301Y-01 EE-SPZ301W-02 EE-SPX401 EE-SPY402 EE-SPZ401Y-01 EE-SPZ401W-02 EE-SPY301 EE-SPZ301-A EE-SPZ301W-01 EE-SPZ301 EE-SPY401 EE-SPZ401-A EE-SPZ401W-01 EE-SPZ401 EE-SX670/-A EE-SX470 EE-SPY311 EE-SY671 EE-SB5V/-E EE-SX671/-A EE-SX471 EE-SPY312 EE-SY672 EE-SB5VC EE-SX672/-A EE-SX472 EE-SPY411 EE-SPX303/403 EE-SB5M EE-SX673/-A EE-SX473 EE-SPY412 EE-SPX311/411 EE-SB5MC EE-2001 EE-2002 Specifications Note: TA= 25° C (77°F), 65% RH Item Value Supply voltage* 5 V to 24 VDC ±10%, ripple (p-p): 5% max. Consumption current 5 mA max. under the following conditions: Connector side: ¨=open, short circuit between IN and © Cord side: ¨=26.4V, OUT= open, © = 0 V Control output Ambient temperature p Ambient humidityy 100 mA max. (Residual voltage = 0.8 V max.) Operating -10°C to 55°C (14°F to 131°F) Storage -25°C to 65°C (-13°F to 149°F) Operating 5 to 85% RH Storage 5 to 95% RH *Use the indicated supply voltages for the specified products below: Supply voltage Part number 12 to 24 VDC ±10%, ripple (p-p): 5% max. EE-SPX303, EE-SPX403 5 to 15 VDC ±10%, ripple (p-p): 5% max. EE-SB5V/-E, EE-SB5VC 5 to 12 VDC ±10%, ripple (p-p): 5% max. EE-SB5M, EE-SB5MC EE-2001/2002 EE-2001/2002 Operation J WIRING DIAGRAM Cord Side Connector Side + + IN NPN output type Built-in Amplifier Photomicrosensor 5 VDC to 24 VDC OUT Main Circuit Load -- -- 0V Dimensions Unit: mm (inch) J EE-2001 11.8 (0.46) 8 5.3 (0.21) 16.2 (0.64) 20 ±10 200 ±30 40 (1.57) 200 ±30 ∅4.0 1 2 3 ∅8 12 (0.47) 2 EE-2001/2002 EE-2001/2002 J EE-2002 8 12.5 (0.49) 10.7 (0.42) 4.9 (0.19) 20 ±10 200 ±30 40 (1.57) 200 ±30 ∅4.0 1 ∅8 2 3 Note: Insulator material of cable is vinyl chloride. Terminal Arrangement Connector side (sensor side) Cord side (power supply side) Circuit no. (cable color) Function Cable color Function 1 (Brown) VCC (+) Brown VCC (+) 2 (Black) Input (Sensor/output) Black Output 3 (Blue) G (0) Blue G (0) 3 12 (0.47) EE-2001/2002 EE-2001/2002 NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. R OMRON ELECTRONICS LLC OMRON ON--LINE OMRON CANADA, INC. 1-800-55-OMRON Global -- http://www.omron.com USA -- http://www.omron.com/oei Canada -- http://www.omron.com/oci 416-286-6465 One East Commerce Drive Schaumburg, IL 60173 Cat. No. GC APMS-1 09/02 Specifications subject to change without notice. 885 Milner Avenue Toronto, Ontario M1B 5V8 Printed in U.S.A. 4 Switching Power Supply S8jj S82K DIN-Rail Mount Power Supply with a Wide Power Range of 3 to 240 W H Universal voltage range H All models are UL 508 listed H Class 2 approved on all models below H H H H H H 240-W, except dual-output types Undervoltage indicators on all. 90-W, 100-W and 240-W “T”-models have indicator and output PFC models meet EN61000-3-2 (limits for harmonic current emissions) Parallel operation capability (100-W and 240-W) Finger-safe terminal block with cover according to VDE0106/P100 Approvals: UL, CSA, VDE, and CE 3-year warranty uR Ordering Information Rated input p voltage lt Power ratings g 100 to 240 VAC 3W 7.5 W 15 W 30 W 50 W Output p currentt Function configuration Output Undervoltage alarm PFC 5V 0.6 A No 0.25 A Single g output t t Indicator onlyy 12 V 15 V 0.2 A S82K-00315 24 V 0.13 A S82K-00324 5V 1.5 A S82K-00705 12 V 0.6 A S82K-00712 15 V 0.5 A S82K-00715 24 V 0.3 A S82K-00724 +12 V/--12 V 0.3 A/0.2 A +15 V/--15 V 0.2 A/0.2 A 5V 2.5 A 12 V 1.2 A 24 V 0.6 A S82K-01524 5V 5.0 A S82K-03005 12 V 2.5 A S82K-03012 24 V 1.3 A S82K-03024 2.1 A S82K-05024 Output p voltage g 24 V Dual output p S82K-00305 S82K-00312 S82K-00727 S82K-00728 Single g output t t (This table continues on the next page.) 2 Part number S82K-01505 S82K-01512 S8jj S8jj Rated input p voltage lt Power ratings g 120/240 / VAC selectable l t bl 90 W 100 W 120/230 / VAC selectable l t bl 100 to 230 VAC 240 W Output p voltage g 24 V 24V 24 V Output p currentt Function configuration Output Undervoltage alarm PFC 3.75 A Single g output t t Indicator and output t t No S82K-P09024 Yes S82K-09024 No S82K-P10024 Yes S82K-10024 No S82K-24024T 4.2 A 10 A Part number None S82K-24024 Yes S82K-P24024 3 S8jj S8jj S82J DIN-Rail Mounting Industrial Power Supplies with Capacity Up to 600 W H Models range from 10 to 600 W H UL 508 approval H Class 2 approval available for models below H H H H 100 W Universal input or selectable input Wide range of output voltages: 5 V, 12 V, 15 V, or 24 V UL, CSA, VDE, and CE Approvals 3-Year warranty Ordering Information J OPEN-FRAME TYPE POWER SUPPLIES Rated input p voltage g Power ratings i 10 W 100 to 240 VAC 25 W 50 W 120 or 240 VAC ( t (automatically ti ll selected) l t d) 100 W 100 to 240 VAC 120 or 240 VAC (automatically selected) 4 150 W Output Part number Voltage Current Front-mounting bracket DIN-rail mounting bracket 5V 2A S82J-01005A S82J-01005AD 12 V 1A S82J-01012A S82J-01012AD 15 V 0.7 A S82J-01015A S82J-01015AD 24 V 0.5 A S82J-01024A S82J-01024AD 5V 5A S82J-02505A S82J-02505AD 12 V 2.1 A S82J-02512A S82J-02512AD 15 V 1.7 A S82J-02515A S82J-02515AD 24 V 1.1 A S82J-02524A S82J-02524AD 5V 10 A S82J-05005A S82J-05005AD 12 V 4.2 A S82J-05012A S82J-05012AD 24 V 2.1 A S82J-05024A S82J-05024AD 5V 20 A S82J-10005A S82J-10005AD 12 V 8.5 A S82J-10012A S82J-10012AD 15 V 7A S82J-10015A S82J-10015AD 24 V 4.5 A S82J-10024A S82J-10024AD 24 V 6.5 A S82J-15024A S82J-15024AD S8jj S8jj J COVERED-FRAME TYPE POWER SUPPLIES Rated input p voltage g Power ratings i 10 W 100 to 240 VAC 25 W 50 W 120 or 240 VAC ( t (automatically ti ll selected) l t d) 100 W 100 to 240 VAC 120 or 240 VAC (automatically selected) 150 W Output Part number Voltage Current Front-mounting bracket DIN-rail mounting bracket 5V 2A S82J-01005D S82J-01005DD 12 V 1A S82J-01012D S82J-01012DD 15 V 0.7 A S82J-01015D S82J-01015DD 24 V 0.5 A S82J-01024D S82J-01024DD 5V 5A S82J-02505D S82J-02505DD 12 V 2.1 A S82J-02512D S82J-02512DD 15 V 1.7 A S82J-02515D S82J-02515DD 24 V 1.1 A S82J-02524D S82J-02524DD 5V 10 A S82J-05005D S82J-05005DD 12 V 4.2 A S82J-05012D S82J-05012DD 24 V 2.1 A S82J-05024D S82J-05024DD 5V 20 A S82J-10005D S82J-10005DD 12 V 8.5 A S82J-10012D S82J-10012DD 15 V 7A S82J-10015D S82J-10015DD 24 V 4.5 A S82J-10024D S82J-10024DD 24 V 6.5 A S82J-15024D S82J-15024DD J ENCLOSED-FRAME TYPE POWER SUPPLIES Input p voltage g 120 or 230 VAC ((selectable)) Power rating g Output Part number Voltage Current 300 W 24 V 14.0 A S82J-30024 600 W 24 V 27.0 A S82J-60024 Note: 1. A mounting bracket is included with each power supply. 2. To order without a mounting bracket (normally included with the 300 W or 600 W), add an “N” at the end of the part number. 3. For other accessories, refer to the Accessories section that follows. 5 S8jj S8jj S8VS Small Sized, DIN-Rail Mount Power Supply With LED Display H Ultra-compact size 40 W x 95 H (60 W H H H H H H H model) 3-digit, 7-segment LED display shows status at a glance for output voltage, output current, peak current, lifetime years, and run time hours Incorporates a maintenance forecast monitor that displays the remaining life of the power supply, displayed in years Run-Time monitor model displays how long the output has been on, displayed in thousands of hours 90 W model has two outputs; one for undervoltage output and the other is for either the lifetime monitor or run time monitor Approved by UL, cUL, UL508 Listed, Class 2 output (60 W only) CE marked Three-year warranty Ordering Information Power ratings Type Output voltage Output current Part number 60 W Standard 24 V 2.5 A S8VS-06024 90 W 6 With maintenance forecast monitor S8VS-06024A With total runtime monitor S8VS-06024B Standard 3.75 A S8VS-09024 With maintenance forecast monitor S8VS-09024A With total runtime monitor S8VS-09024B S8jj S8jj S8TS Block-type Power Supply Easily Connects With Multiple Units and Offers Many Output Combinations H AC/DC Bus System H Up to four blocks can be connected to increase power from 60 to 240 W H N+1 redundant capability to highly reliable system H Flexible connection for mult-output power supply (5 V, 12 V, 24 V outputs) H Size consistency minimizes stock types H UL 508 listed, Class 2 output and Class 1 Div. 2 approved H Complies with EN6100-3-2 (limits for harmonic current) H 3-year warranty Ordering Information J BASIC BLOCK Description Part number Output voltage Output current With line bus connectors Without line bus connector 24 V 2.5 A S8TS-06024F-E1 S8TS-06024F S8TS-03012F-E1 S8TS-03012F — S8TS-02505F 12 V 5V 5A J BUS LINE CONNECTOR Type Part number AC line + DC line bus (for parallel operation) S8T-BUS01 AC line bus (for series operation or isolated operation) S8T-BUS02 J ACCESSORIES Type Length Width Part number DIN rail 0.5 m (1.64 ft.) 7.3 mm (0.29 in) PFP-50N 1 m (3.28 ft.) 7.3 mm (0.29 in) PFP-100N 1 m (3.28 ft.) 16 mm (0.63 in) PFP-100N2 End plate PFP-M 7 S8jj S8jj NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. R OMRON ELECTRONICS LLC OMRON ON--LINE OMRON CANADA, INC. 1-800-55-OMRON Global -- http://www.omron.com USA -- http://www.omron.com/oei Canada -- http://www.omron.com/oci 416-286-6465 One East Commerce Drive Schaumburg, IL 60173 Cat. No. GC APMS-1 8 09/02 Specifications subject to change without notice. 885 Milner Avenue Toronto, Ontario M1B 5V8 Printed in U.S.A.