EE-SH3-DS

EE-SH3 Series Dimensions Note: Four, R1 Photomicrosensor Features • All models have 3.4 mm wide slot. • Solder terminal models: • PCB terminal models: (Transmissive) All units are in millimeters unless otherwise indicated. Two, C1.5 6.2 19±0.15 25.4 EE-SH3/-SH3-CS/-SH3-DS/-SH3-GS EE-SH3-B/-SH3-C/-SH3-D/-SH3-G Matted Center mark 3.4±0.2 Two, 3.2 dia. holes Solder terminal Cross section AA PCB terminal Cross section AA Absolute Maximum Ratings (Ta = 25°C) Item Emitter Forward current Pulse forward current Reverse voltage Detector Collector-Emitter voltage Emitter-Collector voltage Collector current Collector dissipation Ambient temperature Operating Storage Soldering temperature Symbol IF IFP VR VCEO VECO IC PC Topr Tstg Tsol Rated value 50 mA (see note 1) 1A (see note 2) 4V 30 V --20 mA 100 mW (see note 1) --25°C to 85°C --30°C to 100°C 260°C (see note 3) 10.2 7.2±0.2 7.2±0.2 Four, 0.25 7.6±0.3 2.54±0.2 Model EE-SH3(-B) EE-SH3-C(S) Internal Circuit K C Aperture (a x b) 2.1 x 0.5 2.1 x 1.0 2.1 x 0.2 0.5 x 2.1 EE-SH3-D(S) EE-SH3-G(S) Unless otherwise specified, the tolerances are as shown below. Dimensions 3 mm max. Tolerance ±0.2 ±0.24 ±0.29 ±0.35 ±0.42 A E Note: Terminal No. A K C E Name Anode Cathode Collector Emitter 3 < mm ≤ 6 6 < mm ≤ 10 10 < mm ≤ 18 18 < mm ≤ 30 1. Refer to the temperature rating chart if the ambient temperature exceeds 25°C. 2. The pulse width is 10 µs maximum with a frequency of 100 Hz. 3. Complete soldering within 10 seconds. Ordering Information Description Photomicrosensor ( a s ss e) o o c ose so (Transmissive) EE-SH3(-B) EE-SH3-C(S) EE-SH3-D(S) EE-SH3-G(S) Part number Electrical and Optical Characteristics (Ta = 25°C) Item Forward voltage Emit r mitter Reverse current Peak emission wavelength Light current Det ctor etect Dark current Leakage current Collector-Emitter saturated voltage Peak spectral sensitivity wavelength Rising time Falling time Symbol EE-SH3(-B) VF IR λP IL ID ILEAK VCE (sat) λP tr tf 1.2 V typ., 1.5 V max. 0.01 µA typ., 10 µA max. 940 nm typ. 0.5 to 14 mA typ. 1 to 28 mA typ. 0.1 mA min. 0.5 to 14 mA Value EE-SH3-C(S) EE-SH3-D(S) EE-SH3-G(S) IF = 30 mA VR = 4 V IF = 20 mA IF = 20 mA, VCE = 10 V VCE = 10 V, 0 ℓx ----0.1 V typ., 0.4 V max. IF = 20 mA, IL = 0.1 mA VCE = 10 V VCC = 5 V, RL = 100 Ω, 100 IL = 5 mA Condition 2 nA typ., 200 nA max. --0.1 V typ., 0.4 V max. 850 nm typ. 4 µs typ. 4 µs typ. EE-SH3 Series Engineering Data Forward Current vs. Collector Dissipation Temperature Rating IF Pc EE-SH3 Series Forward Current vs. Forward Voltage Characteristics (Typical) Collector dissipation Pc (mW) Forward current I F (mA) Light Current vs. Forward Current Characteristics (Typical) Ta = 25°C VCE = 10 V Forward current I F (mA) Ta = --30°C Ta = 25°C Ta = 70°C Ambient temperature Ta (°C) Forward voltage VF (V) Light current I L (mA) Forward current IF (mA) Light Current vs. Collector-Emitter Voltage Characteristics (EE-SH3(-B)) Ta = 25°C Relative Light Current vs. Ambient Temperature Characteristics (Typical) Relative light current I L (%) IF = 20 mA VCE = 5 V Dark Current vs. Ambient Temperature Characteristics (Typical) VCE = 10 V 0 ℓx Light current I L (mA) IF = 50 mA IF = 40 mA IF = 30 mA IF = 20 mA IF = 10 mA Dark current I D (nA) Collector--Emitter voltage VCE (V) Ambient temperature Ta (°C) Ambient temperature Ta (°C) Response Time vs. Load Resistance Characteristics (Typical) Vcc = 5 V Ta = 25°C Sensing Position Characteristics (EE-SH3-D(S)) Relative light current I L (%) IF = 20 mA VCE = 10 V Ta = 25°C Sensing Position Characteristics (EE-SH3(-B)) Relative light current I L (%) IF = 20 mA VCE = 10 V Ta = 25°C Response time tr, tf (µ s) Center of optical axis Center of optical axis Load resistance RL (kΩ) Distance d (mm) Distance d (mm) Sensing Position Characteristics (EE-SH3-G(S)) Relative light current I L (%) IF = 20 mA VCE = 10 V Ta = 25°C -0 d+ Center of optical axis Sensing Position Characteristics (EE-SH3-C(S)) Relative light current I L (%) IF = 20 mA VCE = 10 V Ta = 25°C Response Time Measurement Circuit Input Output 90 % 10 % Center of optical axis Input Output Distance d (mm) Distance d (mm) NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. R OMRON ELECTRONICS LLC One East Commerce Drive Schaumburg, IL 60173 OMRON CANADA, INC. 885 Milner Avenue Toronto, Ontario M1B 5V8 OMRON ON–LINE Global – http://www.omron.com USA – http://www.omron.com/oei Canada – http://www.omron.com/oci Printed in U.S.A. 847–882–2288 Cat. No. GC NAPMS–1 02/03 416-286-6465 Specifications subject to change without notice.