5/10/07
15:39
Page 116
Text Power Relay – G2R
PCB
Text Power Relay – G2R
PCB
A Power Relay for a Variety of
Purposes with Various Models
Model Number Legend
G2R
■ Conforms to EN 61810-1, UL508, CSA22.2,
SEV, SEMKO.
■ Meets EN60335-1 requirements for household
products.
■ Clearance and creepage distance:
-
1
■ ROHS compliant
2
3 4 5
■ High-sensitivity (360 mW) and high-capacity
1. Relay Function
None: Single-side stable
K:
Double-winding latching
6. Terminals
None: Straight PCB
T:
Quick-connect (upper bracket mounting)
2. Number of Poles
1:
1 pole
2:
2 poles
7. Classification
None: General-purpose
E:
High-capacity
H:
High-sensitivity
■ Double-winding latching type available.
5. Enclosure Ratings
None: Flux protection
4:
Fully sealed
Ordering Information
Specifications
Enclosure
Ratings
General-purpose
Flux protection
Bifurcated contact
Flux protection
Coil
Ratings
■
Contact Form
SPST-NO
SPDT
G2R-1
DPST-NO
G2R-2A
DPDT
G2R-2
9. Rated Coil Voltage
Refer to Coil Ratings
Rated voltage
12 VAC
24 VAC
100/(110) VAC 120 VAC
200/(220)VAC
220 VAC
230 VAC
240 VAC
Rated Current 50Hz
93 mA
46.5 mA
11 mA
9.3 mA
5.5 mA
5.1 mA
4.7 mA
4.7 mA
60Hz
75 mA
37.5 mA
9/(10.6) mA
7.5 mA
4.5 (5.3) mA
4.1 mA
3.8 mA
3.8 mA
65 Ω
260 Ω
4,600 Ω
6,500 Ω
20,200 Ω
25,000 Ω
26,850
30,000 Ω
Coil inductance Armature OFF 0.19
0.81
13.34
21
51.3
57.5
62
65.5
1.55
26.84
42
102
117
124
131
G2R-1A
G2R-1A4
G2R-14
G2R-2A4
G2R-24
DC
G2R-1AZ
G2R-1Z
–
–
Coil resistance
G2R-1AZ4
G2R-1Z4
–
–
Fully sealed
High-capacity
Flux protection
AC/DC
G2R-1A-E
G2R-1-E
–
–
(H) (ref. value)
High-sensitivity
Flux protection
DC
G2R-1A-H
G2R-1-H
G2R-2A-H
G2R-2-H
Must operate voltage
80% max. of rated voltage
Double-winding latching
Flux protection
G2RK-1A
G2RK-1
G2RK-2A
G2RK-2
Must release voltage
30% min. of rated voltage
General-purpose
Unsealed
G2R-1A-T
G2R1-T
–
–
Max. voltage
140% of rated voltage (at 23°C)
–
–
Power consumption
Approx. 0.9 VA at 60 Hz (approx. 0.7 VA at 60 Hz)
Rated voltage
5 VDC
6 VDC
12 VDC
24 VDC
48 VDC
100 VDC
Rated current (50/60Hz)
106 mA
88.2 mA
43.6 mA
21.8 mA
11.5 mA
5.3 mA
Coil resistance
AC
DC
Note: 1. When ordering, add the rated coil voltage to the model number.
Example: G2R-1A 12 VDC
Rated coil voltage
2. Models with CTI250 material are also available.
Contact your OMRON representative for more details.
Armature ON
0.39
47 Ω
68 Ω
275 Ω
1,100 Ω
4,170 Ω
18,860 Ω
Coil inductance Armature OFF 0.20
0.28
1.15
4.27
13.86
67.2
0.39
0.55
2.29
8.55
27.71
93.2
(H) (ref. value)
116
8. Safety Standards
None: UL/CSA/EN/SEV/TÜV
SKVD: UL/CSA/EN/SEV/TÜV/SEMKO
Coil Ratings
AC/DC
Fully sealed
Quick connect
(upper bracket
mounting)
9
4. Contact Type
None: Single
Z:
Bifurcated
(16 A) types available.
PCB terminal
8
3. Contact Form
None: ■PDT
A:
■PST-NO
8 mm/8 m.
■ Models with CTI250 material available.
Classification
VDC
6 7
Power Relays
Omron 08 Cat 1-302
Armature ON
Must operate voltage
70% max. of rated voltage
Must release voltage
15% min. of rated voltage
Max. voltage
170% of rated voltage (at 23°C)
Power consumption
Approx. 0.53 W
117
5/10/07
15:39
Page 116
Text Power Relay – G2R
PCB
Text Power Relay – G2R
PCB
A Power Relay for a Variety of
Purposes with Various Models
Model Number Legend
G2R
■ Conforms to EN 61810-1, UL508, CSA22.2,
SEV, SEMKO.
■ Meets EN60335-1 requirements for household
products.
■ Clearance and creepage distance:
-
1
■ ROHS compliant
2
3 4 5
■ High-sensitivity (360 mW) and high-capacity
1. Relay Function
None: Single-side stable
K:
Double-winding latching
6. Terminals
None: Straight PCB
T:
Quick-connect (upper bracket mounting)
2. Number of Poles
1:
1 pole
2:
2 poles
7. Classification
None: General-purpose
E:
High-capacity
H:
High-sensitivity
■ Double-winding latching type available.
5. Enclosure Ratings
None: Flux protection
4:
Fully sealed
Ordering Information
Specifications
Enclosure
Ratings
General-purpose
Flux protection
Bifurcated contact
Flux protection
Coil
Ratings
■
Contact Form
SPST-NO
SPDT
G2R-1
DPST-NO
G2R-2A
DPDT
G2R-2
9. Rated Coil Voltage
Refer to Coil Ratings
Rated voltage
12 VAC
24 VAC
100/(110) VAC 120 VAC
200/(220)VAC
220 VAC
230 VAC
240 VAC
Rated Current 50Hz
93 mA
46.5 mA
11 mA
9.3 mA
5.5 mA
5.1 mA
4.7 mA
4.7 mA
60Hz
75 mA
37.5 mA
9/(10.6) mA
7.5 mA
4.5 (5.3) mA
4.1 mA
3.8 mA
3.8 mA
65 Ω
260 Ω
4,600 Ω
6,500 Ω
20,200 Ω
25,000 Ω
26,850
30,000 Ω
Coil inductance Armature OFF 0.19
0.81
13.34
21
51.3
57.5
62
65.5
1.55
26.84
42
102
117
124
131
G2R-1A
G2R-1A4
G2R-14
G2R-2A4
G2R-24
DC
G2R-1AZ
G2R-1Z
–
–
Coil resistance
G2R-1AZ4
G2R-1Z4
–
–
Fully sealed
High-capacity
Flux protection
AC/DC
G2R-1A-E
G2R-1-E
–
–
(H) (ref. value)
High-sensitivity
Flux protection
DC
G2R-1A-H
G2R-1-H
G2R-2A-H
G2R-2-H
Must operate voltage
80% max. of rated voltage
Double-winding latching
Flux protection
G2RK-1A
G2RK-1
G2RK-2A
G2RK-2
Must release voltage
30% min. of rated voltage
General-purpose
Unsealed
G2R-1A-T
G2R1-T
–
–
Max. voltage
140% of rated voltage (at 23°C)
–
–
Power consumption
Approx. 0.9 VA at 60 Hz (approx. 0.7 VA at 60 Hz)
Rated voltage
5 VDC
6 VDC
12 VDC
24 VDC
48 VDC
100 VDC
Rated current (50/60Hz)
106 mA
88.2 mA
43.6 mA
21.8 mA
11.5 mA
5.3 mA
Coil resistance
AC
DC
Note: 1. When ordering, add the rated coil voltage to the model number.
Example: G2R-1A 12 VDC
Rated coil voltage
2. Models with CTI250 material are also available.
Contact your OMRON representative for more details.
Armature ON
0.39
47 Ω
68 Ω
275 Ω
1,100 Ω
4,170 Ω
18,860 Ω
Coil inductance Armature OFF 0.20
0.28
1.15
4.27
13.86
67.2
0.39
0.55
2.29
8.55
27.71
93.2
(H) (ref. value)
116
8. Safety Standards
None: UL/CSA/EN/SEV/TÜV
SKVD: UL/CSA/EN/SEV/TÜV/SEMKO
Coil Ratings
AC/DC
Fully sealed
Quick connect
(upper bracket
mounting)
9
4. Contact Type
None: Single
Z:
Bifurcated
(16 A) types available.
PCB terminal
8
3. Contact Form
None: ■PDT
A:
■PST-NO
8 mm/8 m.
■ Models with CTI250 material available.
Classification
VDC
6 7
Power Relays
Omron 08 Cat 1-302
Armature ON
Must operate voltage
70% max. of rated voltage
Must release voltage
15% min. of rated voltage
Max. voltage
170% of rated voltage (at 23°C)
Power consumption
Approx. 0.53 W
117
5/10/07
15:39
Page 118
Text Power Relay – G2R
PCB
Text Power Relay – G2R
PCB
High-sensitivity Relays
■
Rated voltage
5 VDC
6 VDC
12 VDC
24 VDC
48 VDC
Rated current (50/60Hz)
(see Note. 1)
71.4 mA
60 mA
30 mA
15 mA
7.5 mA
Coil resistance (see Note. 1) 70 Ω
100 Ω
400 Ω
1,600 Ω
6,400 Ω
Coil inductance Armature OFF 0.37
0.53
2.14
7.80
31.20
(H) (ref. value)
1.07
4.27
15.60
62.40
Armature ON
0.75
Contact Ratings
PCB/Flux Protection, Plug-in, Quick-connect Terminal Relays
Item
General-purpose, quick-connect terminal
1 pole
2 poles
Load
Resistive load
(cosϕ = 1)
Inductive load Resistive load
(cosϕ = 0.4;
(cosϕ = 1)
L/R = 7 ms)
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
Rated Load
10 A at 250 VAC;
10 A at 30 VDC
7.5 A at 250
5 A at 250 VAC;
VAC;
5 A at 30 VDC
5 A at 30 VDC
2 A at 250 VAC; 16 A at 250 VAC; 8 A at 250 VAC;
3 A at 30 VDC
16 A at 30 VDC 8 A at 30 VDC
Must operate voltage
70% max. of rated voltage
Must release voltage
15% min. of rated voltage
Max. voltage
170% of rated voltage (at 23°C)
Contact material
AgSnIn
Power consumption
Approx. 0.36 W
Rated carry current
10 A
+15%
/–20% (AC rated
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of
current) or ±10% (DC coil resistance)
2. Operating characteristics are measured at a coil temperature of 23°C
3. Depending on the type of relay, some relays do not have coil specifications. Contact your Omron representative for more
details.
Double-winding Latching Relays
5 VDC
6 VDC
12 VDC
24 VDC
Rated current (see note 1.)
167 mA
138 mA
70.6 mA
34.6 mA
Coil resistance (see note 1.)
30 Ω
43.5 Ω
170 Ω
694 Ω
Coil inductance Armature OFF
0.073
0.104
0.42
1.74
0.146
0.208
0.83
3.43
119 mA
100 mA
50 mA
25 mA
Coil resistance
42 Ω
60 Ω
240 Ω
960 Ω
Coil inductance Armature OFF
0.003
0.005
0.018
0.079
(H) (ref. value)
0.006
0.009
0.036
0.148
(H) (ref. value)
Reset Coil
1 pole
5A
Resistive load
(cosϕ = 1)
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
16 A
Max. switching voltage 380 VAC, 125 VDC
380 VAC, 125 VDC
380 VAC, 125 VDC
Max. switching current 10 A
5A
16 A
Max. switching power
2,500 VA,
300 W
Failure rate
(reference value)
100 mA at 5 VDC
1,875 VA,
150 W
1,250 VA,
150 W
500 VA,
90 W
4,000 VA,
480 W
10 mA at 5 VDC
2,000 VA,
240 W
100 mA at 5 VDC
Note: 1. P level: λ60 = 0.1 x 10-6/operation.
Rated voltage
Set Coil
High-capacity
Number of poles
Armature ON
Rated current
Armature ON
Must set voltage
70% max. of rated voltage
Must reset voltage
70% max. of rated voltage
Max. voltage
140% of rated voltage (at 23°C)
Power consumption
Set coil: Approx. 850 mW; Reset coil: Approx. 600 mW
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
2. Operating characteristics are measured at a coil temperature of 23°C.
PCB/Flux Protection Relays
Item
Bifurcated contacts
High-sensitivity
Number of poles
1 pole
1 pole
Load
Resistive load
(cosϕ = 1)
Rated Load
5 A at 250 VAC; 2 A at 250 VAC; 5 A at 250 VAC;
5 A at 30 VDC
3 A at 30 VDC
5 A at 30 VDC
Rated carry current
5A
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
Resistive load
(cosϕ = 1)
2 poles
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
Resistive load
(cosϕ = 1)
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
2 A at 250 VAC; 3 A at 250 VAC; 1 A at 250 VAC;
3 A at 30 VDC
3 A at 30 VDC
1.5 A at 30 VDC
5A
3A
Max. switching voltage 380 VAC, 125 VDC
380 VAC, 125 VDC
380 VAC, 125 VDC
Max. switching current 5 A
5A
3A
Max. switching power
1,250 VA,
150 W
Failure rate
(reference value)
1 mA at 5 VDC
500 VA,
90 W
1,250 VA,
150 W
100 mA at 5 VDC
500 VA,
90 W
750 VA,
90 W
250 VA,
45 W
10 mA at 5 VDC
-6
Note: P level: λ60 = 0.1 x 10 /operation.
118
119
Power Relays
Omron 08 Cat 1-302
5/10/07
15:39
Page 118
Text Power Relay – G2R
PCB
Text Power Relay – G2R
PCB
High-sensitivity Relays
■
Rated voltage
5 VDC
6 VDC
12 VDC
24 VDC
48 VDC
Rated current (50/60Hz)
(see Note. 1)
71.4 mA
60 mA
30 mA
15 mA
7.5 mA
Coil resistance (see Note. 1) 70 Ω
100 Ω
400 Ω
1,600 Ω
6,400 Ω
Coil inductance Armature OFF 0.37
0.53
2.14
7.80
31.20
(H) (ref. value)
1.07
4.27
15.60
62.40
Armature ON
0.75
Contact Ratings
PCB/Flux Protection, Plug-in, Quick-connect Terminal Relays
Item
General-purpose, quick-connect terminal
1 pole
2 poles
Load
Resistive load
(cosϕ = 1)
Inductive load Resistive load
(cosϕ = 0.4;
(cosϕ = 1)
L/R = 7 ms)
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
Rated Load
10 A at 250 VAC;
10 A at 30 VDC
7.5 A at 250
5 A at 250 VAC;
VAC;
5 A at 30 VDC
5 A at 30 VDC
2 A at 250 VAC; 16 A at 250 VAC; 8 A at 250 VAC;
3 A at 30 VDC
16 A at 30 VDC 8 A at 30 VDC
Must operate voltage
70% max. of rated voltage
Must release voltage
15% min. of rated voltage
Max. voltage
170% of rated voltage (at 23°C)
Contact material
AgSnIn
Power consumption
Approx. 0.36 W
Rated carry current
10 A
+15%
/–20% (AC rated
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of
current) or ±10% (DC coil resistance)
2. Operating characteristics are measured at a coil temperature of 23°C
3. Depending on the type of relay, some relays do not have coil specifications. Contact your Omron representative for more
details.
Double-winding Latching Relays
5 VDC
6 VDC
12 VDC
24 VDC
Rated current (see note 1.)
167 mA
138 mA
70.6 mA
34.6 mA
Coil resistance (see note 1.)
30 Ω
43.5 Ω
170 Ω
694 Ω
Coil inductance Armature OFF
0.073
0.104
0.42
1.74
0.146
0.208
0.83
3.43
119 mA
100 mA
50 mA
25 mA
Coil resistance
42 Ω
60 Ω
240 Ω
960 Ω
Coil inductance Armature OFF
0.003
0.005
0.018
0.079
(H) (ref. value)
0.006
0.009
0.036
0.148
(H) (ref. value)
Reset Coil
1 pole
5A
Resistive load
(cosϕ = 1)
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
16 A
Max. switching voltage 380 VAC, 125 VDC
380 VAC, 125 VDC
380 VAC, 125 VDC
Max. switching current 10 A
5A
16 A
Max. switching power
2,500 VA,
300 W
Failure rate
(reference value)
100 mA at 5 VDC
1,875 VA,
150 W
1,250 VA,
150 W
500 VA,
90 W
4,000 VA,
480 W
10 mA at 5 VDC
2,000 VA,
240 W
100 mA at 5 VDC
Note: 1. P level: λ60 = 0.1 x 10-6/operation.
Rated voltage
Set Coil
High-capacity
Number of poles
Armature ON
Rated current
Armature ON
Must set voltage
70% max. of rated voltage
Must reset voltage
70% max. of rated voltage
Max. voltage
140% of rated voltage (at 23°C)
Power consumption
Set coil: Approx. 850 mW; Reset coil: Approx. 600 mW
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
2. Operating characteristics are measured at a coil temperature of 23°C.
PCB/Flux Protection Relays
Item
Bifurcated contacts
High-sensitivity
Number of poles
1 pole
1 pole
Load
Resistive load
(cosϕ = 1)
Rated Load
5 A at 250 VAC; 2 A at 250 VAC; 5 A at 250 VAC;
5 A at 30 VDC
3 A at 30 VDC
5 A at 30 VDC
Rated carry current
5A
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
Resistive load
(cosϕ = 1)
2 poles
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
Resistive load
(cosϕ = 1)
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
2 A at 250 VAC; 3 A at 250 VAC; 1 A at 250 VAC;
3 A at 30 VDC
3 A at 30 VDC
1.5 A at 30 VDC
5A
3A
Max. switching voltage 380 VAC, 125 VDC
380 VAC, 125 VDC
380 VAC, 125 VDC
Max. switching current 5 A
5A
3A
Max. switching power
1,250 VA,
150 W
Failure rate
(reference value)
1 mA at 5 VDC
500 VA,
90 W
1,250 VA,
150 W
100 mA at 5 VDC
500 VA,
90 W
750 VA,
90 W
250 VA,
45 W
10 mA at 5 VDC
-6
Note: P level: λ60 = 0.1 x 10 /operation.
118
119
Power Relays
Omron 08 Cat 1-302
5/10/07
15:39
Page 120
Text Power Relay – G2R
PCB
Text Power Relay – G2R
PCB
■
PCB/Fully Sealed Relays
Item
General-purpose (single contact)
Bifurcated contact
Item
Number of poles
1 pole
Load
Resistive load
(cosϕ = 1)
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
Resistive load
(cosϕ = 1)
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
Rated Load
8 A at 250 VAC;
8 A at 30 VDC
6 A at 250 VAC;
4 A at 30 VDC
4 A at 250 VAC;
4 A at 30 VDC
1.5 A at 250 VAC; 5 A at 250 VAC;
2.5 A at 30 VDC 5 A at 30 VDC
Rated carry current
2 poles
8A
Max. switching voltage 380 VAC, 125 VDC
Max. switching current 8 A
Max. switching power
2,000 VA,
240 W
Failure rate
(reference value)
100 mA at 5 VDC
1 pole
Resistive load
(cosϕ = 1)
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
2 A at 250 VAC;
3 A at 30 VDC
4A
5A
380 VAC, 125 VDC
380 VAC, 125 VDC
4A
1,500 VA,
120 W
1,000 VA,
120 W
Characteristics
Standard Relays
5A
375 VA,
75 W
10 mA at 5 VDC
1,250 VA,
150 W
500 VA,
90 W
1 mA at 5 VDC
-6
1 Pole
30 mΩ max. (high-capacity type: 100 mΩ max.) 50 mΩ max.
Operate (set) time
15 ms max
Release (reset) time
AC: 10 ms max.; DC: 5 ms max. (w/built-in diode: 20 ms max.)
Max. operating frequency
Mechanical: 18,000 operations/hr
Electrical: 1,800 operations/hr (under rated load)
Insulation resistance
1,000 MΩ min. (at 500 VDC)
10KV 1*40µsec
Insulation
Distance
10.0 mm
Creepage (Typ)
Clearance (Typ) 9.3 mm
Tracking Resistance (CTI)
175 V
Dielectric strength
5,000 VAC, 50/60 Hz for 1 min
between coil and contacts*;
1,000 VAC, 50/60 Hz for 1 min
between contacts of same polarity
Note: P level: λ60 = 0.1 x 10 /operation.
Latching Relays
Number of poles
1 pole
2 poles
2 Poles
Contact resistance
Impulse withstand voltage
5,000 VAC, 50/60 Hz for 1 min
between coil and contacts*;
3,000 VAC, 50/60 Hz for 1 min
between contacts of different polarity
1,000 VAC, 50/60 Hz for 1 min
between contacts of same polarity
Vibration resistance
Resistive load
(cosϕ = 1)
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
Resistive load
(cosϕ = 1)
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
Destruction: 10 to 55 to 10 Hz, 0.75mm single amplitude (1.5mm double amplitude)
Malfunction: 10 to 55 to 10 Hz, 0.75mm single amplitude (1.5mm double amplitude)
Shock resistance
Destruction: 1,000 m/s2
Malfunction: 200 m/s2 when energized; 100 m/s2 when not energized
Rated Load
5 A at 250 VAC;
5 A at 30 VDC
3.5 A at 250 VAC;
2.5 A at 30 VDC
3 A at 250 VAC;
3 A at 30 VDC
1.5 A at 250 VAC;
2 A at 30 VDC
Endurance
Rated carry current
5A
Mechanical: AC coil: 10,000,000 operations min.;
DC coil: 20,000,000 operations min. (at 18,000 operations/hr)
Electrical:100,000 operations min. (at 1,800 operations/hr under rated load)
Load
3A
Max. switching voltage 380 VAC, 125 VDC
380 VAC, 125 VDC
Ambient temperature
Operating: -40˚C to 70˚C (with no icing)
Max. switching current 5 A
3A
Ambient humidity
Operating: 5% to 85%
Weight
Approx. 17 g
Max. switching power
1,250 VA, 150 W
Failure rate
(reference value)
100 mA at 5 VDC
875 VA, 75 W
750 VA, 90 W
10 mA at 5 VDC
375 VA, 60 W
Power Relays
Omron 08 Cat 1-302
Note: Values in the above table are initial values.
-6
Note: P level: λ60 = 0.1 x 10 /operation.
120
121
5/10/07
15:39
Page 120
Text Power Relay – G2R
PCB
Text Power Relay – G2R
PCB
■
PCB/Fully Sealed Relays
Item
General-purpose (single contact)
Bifurcated contact
Item
Number of poles
1 pole
Load
Resistive load
(cosϕ = 1)
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
Resistive load
(cosϕ = 1)
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
Rated Load
8 A at 250 VAC;
8 A at 30 VDC
6 A at 250 VAC;
4 A at 30 VDC
4 A at 250 VAC;
4 A at 30 VDC
1.5 A at 250 VAC; 5 A at 250 VAC;
2.5 A at 30 VDC 5 A at 30 VDC
Rated carry current
2 poles
8A
Max. switching voltage 380 VAC, 125 VDC
Max. switching current 8 A
Max. switching power
2,000 VA,
240 W
Failure rate
(reference value)
100 mA at 5 VDC
1 pole
Resistive load
(cosϕ = 1)
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
2 A at 250 VAC;
3 A at 30 VDC
4A
5A
380 VAC, 125 VDC
380 VAC, 125 VDC
4A
1,500 VA,
120 W
1,000 VA,
120 W
Characteristics
Standard Relays
5A
375 VA,
75 W
10 mA at 5 VDC
1,250 VA,
150 W
500 VA,
90 W
1 mA at 5 VDC
-6
1 Pole
30 mΩ max. (high-capacity type: 100 mΩ max.) 50 mΩ max.
Operate (set) time
15 ms max
Release (reset) time
AC: 10 ms max.; DC: 5 ms max. (w/built-in diode: 20 ms max.)
Max. operating frequency
Mechanical: 18,000 operations/hr
Electrical: 1,800 operations/hr (under rated load)
Insulation resistance
1,000 MΩ min. (at 500 VDC)
10KV 1*40µsec
Insulation
Distance
10.0 mm
Creepage (Typ)
Clearance (Typ) 9.3 mm
Tracking Resistance (CTI)
175 V
Dielectric strength
5,000 VAC, 50/60 Hz for 1 min
between coil and contacts*;
1,000 VAC, 50/60 Hz for 1 min
between contacts of same polarity
Note: P level: λ60 = 0.1 x 10 /operation.
Latching Relays
Number of poles
1 pole
2 poles
2 Poles
Contact resistance
Impulse withstand voltage
5,000 VAC, 50/60 Hz for 1 min
between coil and contacts*;
3,000 VAC, 50/60 Hz for 1 min
between contacts of different polarity
1,000 VAC, 50/60 Hz for 1 min
between contacts of same polarity
Vibration resistance
Resistive load
(cosϕ = 1)
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
Resistive load
(cosϕ = 1)
Inductive load
(cosϕ = 0.4;
L/R = 7 ms)
Destruction: 10 to 55 to 10 Hz, 0.75mm single amplitude (1.5mm double amplitude)
Malfunction: 10 to 55 to 10 Hz, 0.75mm single amplitude (1.5mm double amplitude)
Shock resistance
Destruction: 1,000 m/s2
Malfunction: 200 m/s2 when energized; 100 m/s2 when not energized
Rated Load
5 A at 250 VAC;
5 A at 30 VDC
3.5 A at 250 VAC;
2.5 A at 30 VDC
3 A at 250 VAC;
3 A at 30 VDC
1.5 A at 250 VAC;
2 A at 30 VDC
Endurance
Rated carry current
5A
Mechanical: AC coil: 10,000,000 operations min.;
DC coil: 20,000,000 operations min. (at 18,000 operations/hr)
Electrical:100,000 operations min. (at 1,800 operations/hr under rated load)
Load
3A
Max. switching voltage 380 VAC, 125 VDC
380 VAC, 125 VDC
Ambient temperature
Operating: -40˚C to 70˚C (with no icing)
Max. switching current 5 A
3A
Ambient humidity
Operating: 5% to 85%
Weight
Approx. 17 g
Max. switching power
1,250 VA, 150 W
Failure rate
(reference value)
100 mA at 5 VDC
875 VA, 75 W
750 VA, 90 W
10 mA at 5 VDC
375 VA, 60 W
Power Relays
Omron 08 Cat 1-302
Note: Values in the above table are initial values.
-6
Note: P level: λ60 = 0.1 x 10 /operation.
120
121
5/10/07
15:39
Page 122
Text Power Relay – G2R
PCB
Text Power Relay – G2R
PCB
Approved Standards
UL 508 (File No. E41643), CSA 22.2 No.14 (File No. LR31928)
■
Double-winding Latching Relays
Item
1 Pole
Contact resistance
30 mΩ max.
Set time
20 ms max
2 Poles
Power Relays
Omron 08 Cat 1-302
50 mΩ max.
Model
Reset time
20 ms max.
Min. set/reset signal width
30 ms max.
Max. operating frequency
Mechanical: 18,000 operations/hr
Electrical: 1,800 operations/hr (under rated load)
Insulation resistance
1,000 MΩ min. (at 500 VDC)
Dielectric strength
5,000 VAC, 50/60 Hz for 1 min
between coil and contacts*;
1,000 VAC, 50/60 Hz for 1 min
between contacts of same pole;
1,000 VAC, 50/60 Hz for 1 min
between set and reset coil
5,000 VAC, 50/60 Hz for 1 min
between coil and contacts*;
3,000 VAC, 50/60 Hz for 1 min
between contacts of different poles
1,000 VAC, 50/60 Hz for 1 min
between contacts of same pole
1,000 VAC, 50/60 Hz for 1 min
between set and reset coil
Contact form
G2R-1
G2R-14
G2R-1-H
G2R-1-S
G2R-1-T
SPDT
G2R-1A
G2R-1A4
G2R-1A-H
G2R-1A-S
G2R-1A-T
SPST-NO
G2R-1-E
SPDT
G2R-1A-E
SPST-NO
G2R-2
G2R-24
G2R-2-H
G2R-2-S
DPDT
Vibration resistance
Destruction: 10 to 55 to 10 Hz, 0.75mm single amplitude (1.5mm double amplitude)
Malfunction: 10 to 55 to 10 Hz, 0.75mm single amplitude (1.5mm double amplitude)
Shock resistance
Destruction: 1,000 m/s2 (approx. 100G)
Malfunction: Set: 500 m/s2 (approx. 50G); 200 m/s2 (approx. 20G)
Reset: 100 m/s2 (approx. 10G)
G2R-2A
G2R-2A4
G2R-2A-H
G2R-2A-S
DPST-NO
Endurance
Mechanical: 10,000,000 operations min (at 18,000 operations/hr)
Electrical: 100,000 operations min. (at 1,800 operations/hr under rated load)
G2R-1A-ASI
SPST-NO
Ambient temperature
Operating: -40˚C to 70˚C (with no icing)
Ambient humidity
Operating: 5% to 85%
Weight
Approx. 17 g (Quick-connect type: approx. 20g)
Coil ratings
3 to 110 VDC
3 to 240 VAC
Contact ratings
10 A, 30 VDC (resistive)
10 A, 250 VAC (general use)
TV-3 (NO contact only)
16 A, 30 VDC (resistive, NO contact only)
16 A, 250 VAC (general use, NO contact only)
TV-3 (NO contact only); (1/3 hp, 120 VAC For UL)
5 A, 30 VDC (resistive)
5 A, 250 VAC (general use)
TV-3 (NO contact only)
10 A, 30 VDC (resistive)
10 A, 250 VAC (general use)
TV-5/TV-8 (NO contact only), (For UL)
TV-8 (NO contact only); 1/4 hp, 125 VAC (For CSA)
Note: Values in the above table are the initial values.
122
123
5/10/07
15:39
Page 122
Text Power Relay – G2R
PCB
Text Power Relay – G2R
PCB
Approved Standards
UL 508 (File No. E41643), CSA 22.2 No.14 (File No. LR31928)
■
Double-winding Latching Relays
Item
1 Pole
Contact resistance
30 mΩ max.
Set time
20 ms max
2 Poles
Power Relays
Omron 08 Cat 1-302
50 mΩ max.
Model
Reset time
20 ms max.
Min. set/reset signal width
30 ms max.
Max. operating frequency
Mechanical: 18,000 operations/hr
Electrical: 1,800 operations/hr (under rated load)
Insulation resistance
1,000 MΩ min. (at 500 VDC)
Dielectric strength
5,000 VAC, 50/60 Hz for 1 min
between coil and contacts*;
1,000 VAC, 50/60 Hz for 1 min
between contacts of same pole;
1,000 VAC, 50/60 Hz for 1 min
between set and reset coil
5,000 VAC, 50/60 Hz for 1 min
between coil and contacts*;
3,000 VAC, 50/60 Hz for 1 min
between contacts of different poles
1,000 VAC, 50/60 Hz for 1 min
between contacts of same pole
1,000 VAC, 50/60 Hz for 1 min
between set and reset coil
Contact form
G2R-1
G2R-14
G2R-1-H
G2R-1-S
G2R-1-T
SPDT
G2R-1A
G2R-1A4
G2R-1A-H
G2R-1A-S
G2R-1A-T
SPST-NO
G2R-1-E
SPDT
G2R-1A-E
SPST-NO
G2R-2
G2R-24
G2R-2-H
G2R-2-S
DPDT
Vibration resistance
Destruction: 10 to 55 to 10 Hz, 0.75mm single amplitude (1.5mm double amplitude)
Malfunction: 10 to 55 to 10 Hz, 0.75mm single amplitude (1.5mm double amplitude)
Shock resistance
Destruction: 1,000 m/s2 (approx. 100G)
Malfunction: Set: 500 m/s2 (approx. 50G); 200 m/s2 (approx. 20G)
Reset: 100 m/s2 (approx. 10G)
G2R-2A
G2R-2A4
G2R-2A-H
G2R-2A-S
DPST-NO
Endurance
Mechanical: 10,000,000 operations min (at 18,000 operations/hr)
Electrical: 100,000 operations min. (at 1,800 operations/hr under rated load)
G2R-1A-ASI
SPST-NO
Ambient temperature
Operating: -40˚C to 70˚C (with no icing)
Ambient humidity
Operating: 5% to 85%
Weight
Approx. 17 g (Quick-connect type: approx. 20g)
Coil ratings
3 to 110 VDC
3 to 240 VAC
Contact ratings
10 A, 30 VDC (resistive)
10 A, 250 VAC (general use)
TV-3 (NO contact only)
16 A, 30 VDC (resistive, NO contact only)
16 A, 250 VAC (general use, NO contact only)
TV-3 (NO contact only); (1/3 hp, 120 VAC For UL)
5 A, 30 VDC (resistive)
5 A, 250 VAC (general use)
TV-3 (NO contact only)
10 A, 30 VDC (resistive)
10 A, 250 VAC (general use)
TV-5/TV-8 (NO contact only), (For UL)
TV-8 (NO contact only); 1/4 hp, 125 VAC (For CSA)
Note: Values in the above table are the initial values.
122
123
5/10/07
15:39
Page 124
Text Power Relay – G2R
PCB
Text Power Relay – G2R
PCB
16 A, 250 VAC1 (AgSnIn contact)
16 A, 30 VDC1 (AgSnIn contact)
10 A, 250 VAC1
5 A, 250 VAC3
10 A, 30 VDC1
2 poles
5 A, 250 VAC1
2 A, 380 VAC1
5 A, 30 VDC1
SEMKO
Contact form
Coil ratings
Contact ratings
1 pole
3 to 110 VDC
3 to 240 VAC
10/80 A, 250 VAC
3/100 A, 250 VAC
16/128 A, 250 VAC (AgSnIn contact)
2 poles
Maximum Switching Power
Flux Protection/Plug-in Relays
G2R-1, G2R-1A, G2R-1-T, G2R-1A-T
AC inductive load
AC
resistive load
DC
resistive load
DC inductive load
(L/R = 7 ms)
G2R-1-E, G2R-1A-E
AC
resistive load
DC inductive load
(L/R = 7 ms)
DC
resistive load
AC inductive load
AC
resistive load
DC
resistive load
DC inductive load
(L/R = 7 ms)
5/40 A, 250 VAC
Switching voltage (V)
TÜV (EN61810-1)
3 to 110 VDC, 6 VAC to 240 VAC
(for Standard coil)
3 to 48 VDC (for K, U coil)
3 to 70 VDC (for H coil)
10 A, 30 VDC (resistive)
10 A, 250 VAC (general use)
TV-3 (NO contact only)
2 poles
Switching voltage (V)
Switching voltage (V)
G2R-2-H, G2R-2A-H
Contact ratings
10 A, 250 VAC (cosϕ = 1.0)
10 A, 30 VDC (0 ms)
16 A, 250 VAC (cosϕ = 1.0)
(AgSnIn contact)
8 A, 250 VAC (cosϕ = 0.4)
5 A, 250 VAC (cosϕ =1.0)
5 A, 30 VDC (0 ms)
2.5 A, 250 VAC (cosϕ = 0.4)
AC inductive load
AC
resistive load
DC
resistive load
DC inductive load
(L/R = 7 ms)
Switching current (A)
1 pole
G2R-1-H, G2R-1A-H, G2R-2, G2R-2A
Coil ratings
Switching current (A)
Contact form
Contact ratings
AC inductive load
G2R-1Z, G2R-1AZ
Switching current (A)
3 to 110 VDC
3 to 240 VAC
Contact ratings
Switching current (A)
1 pole
Coil ratings
Switching current (A)
Contact form
Power Relays
Engineering Data
SEV
AC inductive load
AC
resistive load
DC
resistive load
DC inductive load
(L/R = 7 ms)
EN 61810-1 (VDE)
5 A, 30 VDC (resistive)
5 A, 250 VAC (general use)
TV-3 (NO contact only)
Contact form
1 pole
2 poles
10 A, 30 VDC (resistive)
10 A, 250 VAC (general use)
TV-8 (NO contact only); 1/4 hp, 125 VAC
Coil ratings
Contact ratings
5, 6, 9, 12, 18, 24, 48, 60, 100, 110 VDC
12, 18, 24, 48, 50, 100/(110), 110, 120,
200/(220), 220, 230, 240 VAC
10 A, 250 VAC (cosϕ = 1.0)
10 A, 30 VDC (0 ms)
16 A, 250 VAC (cosϕ = 1.0)
5, 6, 9, 12, 18, 24, 48, 60, 100, 110 VDC
12, 18, 24, 48, 50, 100/(110), 110, 120,
200/(220), 220, 230, 240 VAC
5 A, 250 VAC (cosϕ =1.0)
5 A, 30 VDC (0 ms)
Switching voltage (V)
G2RK-1A, G2RK-1
AC inductive load
G2RK-2A, G2RK-2
AC
resistive load
DC
resistive load
DC inductive load
(L/R = 7 ms)
Switching voltage (V)
124
Switching voltage (V)
Switching current (A)
16 A, 30 VDC (resistive, NO contact only)
16 A, 250 VAC (general use, NO contact only)
TV-3 (NO contact only)
Switching current (A)
s
Omron 08 Cat 1-302
AC inductive load
AC
resistive load
DC inductive load
(L/R = 7 ms)
DC
resistive load
Switching voltage (V)
125
5/10/07
15:39
Page 124
Text Power Relay – G2R
PCB
Text Power Relay – G2R
PCB
16 A, 250 VAC1 (AgSnIn contact)
16 A, 30 VDC1 (AgSnIn contact)
10 A, 250 VAC1
5 A, 250 VAC3
10 A, 30 VDC1
2 poles
5 A, 250 VAC1
2 A, 380 VAC1
5 A, 30 VDC1
SEMKO
Contact form
Coil ratings
Contact ratings
1 pole
3 to 110 VDC
3 to 240 VAC
10/80 A, 250 VAC
3/100 A, 250 VAC
16/128 A, 250 VAC (AgSnIn contact)
2 poles
Maximum Switching Power
Flux Protection/Plug-in Relays
G2R-1, G2R-1A, G2R-1-T, G2R-1A-T
AC inductive load
AC
resistive load
DC
resistive load
DC inductive load
(L/R = 7 ms)
G2R-1-E, G2R-1A-E
AC
resistive load
DC inductive load
(L/R = 7 ms)
DC
resistive load
AC inductive load
AC
resistive load
DC
resistive load
DC inductive load
(L/R = 7 ms)
5/40 A, 250 VAC
Switching voltage (V)
TÜV (EN61810-1)
3 to 110 VDC, 6 VAC to 240 VAC
(for Standard coil)
3 to 48 VDC (for K, U coil)
3 to 70 VDC (for H coil)
10 A, 30 VDC (resistive)
10 A, 250 VAC (general use)
TV-3 (NO contact only)
2 poles
Switching voltage (V)
Switching voltage (V)
G2R-2-H, G2R-2A-H
Contact ratings
10 A, 250 VAC (cosϕ = 1.0)
10 A, 30 VDC (0 ms)
16 A, 250 VAC (cosϕ = 1.0)
(AgSnIn contact)
8 A, 250 VAC (cosϕ = 0.4)
5 A, 250 VAC (cosϕ =1.0)
5 A, 30 VDC (0 ms)
2.5 A, 250 VAC (cosϕ = 0.4)
AC inductive load
AC
resistive load
DC
resistive load
DC inductive load
(L/R = 7 ms)
Switching current (A)
1 pole
G2R-1-H, G2R-1A-H, G2R-2, G2R-2A
Coil ratings
Switching current (A)
Contact form
Contact ratings
AC inductive load
G2R-1Z, G2R-1AZ
Switching current (A)
3 to 110 VDC
3 to 240 VAC
Contact ratings
Switching current (A)
1 pole
Coil ratings
Switching current (A)
Contact form
Power Relays
Engineering Data
SEV
AC inductive load
AC
resistive load
DC
resistive load
DC inductive load
(L/R = 7 ms)
EN 61810-1 (VDE)
5 A, 30 VDC (resistive)
5 A, 250 VAC (general use)
TV-3 (NO contact only)
Contact form
1 pole
2 poles
10 A, 30 VDC (resistive)
10 A, 250 VAC (general use)
TV-8 (NO contact only); 1/4 hp, 125 VAC
Coil ratings
Contact ratings
5, 6, 9, 12, 18, 24, 48, 60, 100, 110 VDC
12, 18, 24, 48, 50, 100/(110), 110, 120,
200/(220), 220, 230, 240 VAC
10 A, 250 VAC (cosϕ = 1.0)
10 A, 30 VDC (0 ms)
16 A, 250 VAC (cosϕ = 1.0)
5, 6, 9, 12, 18, 24, 48, 60, 100, 110 VDC
12, 18, 24, 48, 50, 100/(110), 110, 120,
200/(220), 220, 230, 240 VAC
5 A, 250 VAC (cosϕ =1.0)
5 A, 30 VDC (0 ms)
Switching voltage (V)
G2RK-1A, G2RK-1
AC inductive load
G2RK-2A, G2RK-2
AC
resistive load
DC
resistive load
DC inductive load
(L/R = 7 ms)
Switching voltage (V)
124
Switching voltage (V)
Switching current (A)
16 A, 30 VDC (resistive, NO contact only)
16 A, 250 VAC (general use, NO contact only)
TV-3 (NO contact only)
Switching current (A)
s
Omron 08 Cat 1-302
AC inductive load
AC
resistive load
DC inductive load
(L/R = 7 ms)
DC
resistive load
Switching voltage (V)
125
15:39
Page 126
Text Power Relay – G2R
PCB
Text Power Relay – G2R
PCB
Engineering Data (cont.)
Fully Sealed Relays
G2R-24, G2R-2A4
G2R-1Z4, G2R-1AZ4
DC resistive load
AC
resistive load
DC
resistive load
DC inductive load
(L/R = 7 ms)
AC inductive load
(cosφ = 0.4)
AC
resistive load
DC
resistive load
DC inductive load
(L/R = 7 ms)
Endurance (x10 3 operations)
DC inductive load
(L/R = 7 ms)
AC inductive load
(cosφ = 0.4)
Switching current (A)
AC inductive load AC
(cosφ = 0.4)
resistive load
Switching current (A)
Switching current (A)
G2RK-1A, G2RK-1
Switching voltage (V)
100
250-VAC inductive load
(cosφ = 0.4)
100
30-VDC inductive load (L/R = 7ms)
10,000
5,000
3,000
250-VAC (cosφ = 0.4)
/30-VDC (L/R = 7 ms)
inductive load
1,000
250-VAC/30-VDC
resistive load
500
300
5,000
1,000
30-VDC inductive load (L/R = 7 ms)
500
250-VAC/30-VDC
resistive load
100
50
250-VAC inductive
load (cosφ = 0.4)
G2R-14, G2R-1A4
G2R-24, G2R-2A4
100
Switching current (A)
100
50
30-VDC inductive load (L/R = 7 ms)
250-VAC/30-VDC
resistive load
250-VAC
inductive load
(cosφ = 0.4)
Switching current (A)
250-VAC/30-VDC
resistive load
500
250-VAC inductive
load (cosφ = 0.4)
100
30-VDC inductive load (L/R = 7ms)
G2R-1Z4, G2R-1AZ4
5,000
1,000
250-VAC/30-VDC
resistive load
500
30-VDC inductive load
(L/R = 7 ms)
100
50
5,000
1,000
500
30-VDC inductive
load (L/R = 7 ms)
250-VAC/30-VDC
resistive load
100
50
250-VAC inductive
load (cosφ = 0.4)
250-VAC inductive load (cosφ = 0.4)
Switching current (A)
Switching current (A)
G2R-13-S, G2R-1A3-S
Ambient Temperature vs Maximum Coil Voltage
10,000
1,000
1,000
Switching current (A)
Switching current (A)
5,000
3,000
1,000
500
250-VAC/30-VDC
resistive load
30-VDC
inductive load
(L/R = 7 ms)
300
100
50
30
250-VAC
inductive load
(cosφ = 0.4)
Maximum coil voltage (%)
5,000
G2R-2-H, G2R-2A-H
Endurance (x10 3 operations)
Endurance (x103 operations)
G2R-1-H, G2R-1A-H, G2R-2
G2R-2A
5,000
50
Switching current (A)
Switching current (A)
Endurance (x10 3 operations)
500
500
100
50
30-VDC
inductive load
(L/R = 7ms)
Endurance (x103 operations)
250-VAC/30-VDC
resistive load
250-VAC inductive
load (cosφ = 0.4)
Fully sealed Relays
G2R-1Z, G2R-1AZ
Endurance (x10 3 operations)
5,000
G2R-1-E, G2R-1A-E
Endurance (x10 3 operations)
Endurance (x10 3 operations)
G2R-1, G2R-1A, G2R-1-T, G2R-1A-T
250-VAC/30-VDC
resistive load
30-VDC inductive
load (L/R = 7 ms)
1,000
500
Switching current (A)
Flux Protection/Plug-in Relays
50
250-VAC inductive
load (cosφ = 0.4)
10,000
5,000
Switching voltage (V)
Endurance
1,000
250-VAC/30-VDC
resistive load
500
50
Switching voltage (V)
G2RK-2A, G2RK-2
5,000
1,000
Power Relays
G2R-14, G2R-1A4
Endurance (x10 3 operations)
5/10/07
Endurance (x103 operations)
Omron 08 Cat 1-302
DC coil
AC coil
Note: The maximum coil voltage refers to the maximum value in a varying range of operating
power voltage, not a continuous voltage.
Switching current (A)
Ambient temperature (°C)
126
127
15:39
Page 126
Text Power Relay – G2R
PCB
Text Power Relay – G2R
PCB
Engineering Data (cont.)
Fully Sealed Relays
G2R-24, G2R-2A4
G2R-1Z4, G2R-1AZ4
DC resistive load
AC
resistive load
DC
resistive load
DC inductive load
(L/R = 7 ms)
AC inductive load
(cosφ = 0.4)
AC
resistive load
DC
resistive load
DC inductive load
(L/R = 7 ms)
Endurance (x10 3 operations)
DC inductive load
(L/R = 7 ms)
AC inductive load
(cosφ = 0.4)
Switching current (A)
AC inductive load AC
(cosφ = 0.4)
resistive load
Switching current (A)
Switching current (A)
G2RK-1A, G2RK-1
Switching voltage (V)
100
250-VAC inductive load
(cosφ = 0.4)
100
30-VDC inductive load (L/R = 7ms)
10,000
5,000
3,000
250-VAC (cosφ = 0.4)
/30-VDC (L/R = 7 ms)
inductive load
1,000
250-VAC/30-VDC
resistive load
500
300
5,000
1,000
30-VDC inductive load (L/R = 7 ms)
500
250-VAC/30-VDC
resistive load
100
50
250-VAC inductive
load (cosφ = 0.4)
G2R-14, G2R-1A4
G2R-24, G2R-2A4
100
Switching current (A)
100
50
30-VDC inductive load (L/R = 7 ms)
250-VAC/30-VDC
resistive load
250-VAC
inductive load
(cosφ = 0.4)
Switching current (A)
250-VAC/30-VDC
resistive load
500
250-VAC inductive
load (cosφ = 0.4)
100
30-VDC inductive load (L/R = 7ms)
G2R-1Z4, G2R-1AZ4
5,000
1,000
250-VAC/30-VDC
resistive load
500
30-VDC inductive load
(L/R = 7 ms)
100
50
5,000
1,000
500
30-VDC inductive
load (L/R = 7 ms)
250-VAC/30-VDC
resistive load
100
50
250-VAC inductive
load (cosφ = 0.4)
250-VAC inductive load (cosφ = 0.4)
Switching current (A)
Switching current (A)
G2R-13-S, G2R-1A3-S
Ambient Temperature vs Maximum Coil Voltage
10,000
1,000
1,000
Switching current (A)
Switching current (A)
5,000
3,000
1,000
500
250-VAC/30-VDC
resistive load
30-VDC
inductive load
(L/R = 7 ms)
300
100
50
30
250-VAC
inductive load
(cosφ = 0.4)
Maximum coil voltage (%)
5,000
G2R-2-H, G2R-2A-H
Endurance (x10 3 operations)
Endurance (x103 operations)
G2R-1-H, G2R-1A-H, G2R-2
G2R-2A
5,000
50
Switching current (A)
Switching current (A)
Endurance (x10 3 operations)
500
500
100
50
30-VDC
inductive load
(L/R = 7ms)
Endurance (x103 operations)
250-VAC/30-VDC
resistive load
250-VAC inductive
load (cosφ = 0.4)
Fully sealed Relays
G2R-1Z, G2R-1AZ
Endurance (x10 3 operations)
5,000
G2R-1-E, G2R-1A-E
Endurance (x10 3 operations)
Endurance (x10 3 operations)
G2R-1, G2R-1A, G2R-1-T, G2R-1A-T
250-VAC/30-VDC
resistive load
30-VDC inductive
load (L/R = 7 ms)
1,000
500
Switching current (A)
Flux Protection/Plug-in Relays
50
250-VAC inductive
load (cosφ = 0.4)
10,000
5,000
Switching voltage (V)
Endurance
1,000
250-VAC/30-VDC
resistive load
500
50
Switching voltage (V)
G2RK-2A, G2RK-2
5,000
1,000
Power Relays
G2R-14, G2R-1A4
Endurance (x10 3 operations)
5/10/07
Endurance (x103 operations)
Omron 08 Cat 1-302
DC coil
AC coil
Note: The maximum coil voltage refers to the maximum value in a varying range of operating
power voltage, not a continuous voltage.
Switching current (A)
Ambient temperature (°C)
126
127
5/10/07
15:39
Page 128
Text Power Relay – G2R
PCB
Text Power Relay – G2R
PCB
Dimensions
Relays with PCB Terminals
Terminal Arrangement/
Internal Connections
(Bottom View)
SPDT Relays
Note: 1. All units are in millimetres unless otherwise indicated.
2. Orientation marks are indicated as follows:
G2R-14, G2R-1Z4
13.5 max.
29 max.
(28.6)*
Mounting Holes
(Bottom View)
Tolerance: ±0.1
(12.9)*
3.5 3.5
Relays with PCB Terminals
Terminal Arrangement/
Internal Connections
(Bottom View)
SPDT Relays
G2R-1, G2R-1Z, G2R-1-H
1
(2.7)
3
2
7.5
3.5 3.5
4
0.3
0.5
(2.1)
1
0.5
20
(No coil polarity)
0.16
(2.7)
25.5 max.
(25.3)*
(0.3)
1
7.5
(2.1)
The illustration
shows the
G2R-1.
0.5
0.5**
Five, 1.3-dia.
holes
4
5
4
*Average value
3
2
SPST-NO Relays
G2R-1A4, G2R-1AZ4
13.5 max.
(12.9)*
29 max.
(28.6)*
20
3.5
1
0.3
(No coil polarity)
0.16
1
25.5 max.
(24.8)*
*Average value
**0.3 (-H Type)
SPST-NO Relays
Five, 1.3-dia.
holes
4
5
Tolerance: ±0.1
13 max.
(12.7)*
29 max.
(28.8)*
25.5 max.
(24.8)*
Mounting Holes
(Bottom View)
(2.7)
3
7.5
Four, 1.3-dia.
holes
4
5
(2.1)
G2R-1A, G2R-1AZ, G2R-1A-H
0.5
4
13 max.
(12.7)*
29 max.
(28.8)*
20
1
0.3
(No coil polarity)
0.16
3.5
*Average value
1
25.5 max.
(25.3)*
(2.7)
3
7.5
(0.3)
Four, 1.3-dia.
holes
4
5
(2.1)
The illustration
shows the
G2R-1A.
0.3
4
0.5**
DPDT Relays
G2R-2, G2R-2-H
20
1
Relays with PCB Terminals
25.5 max.
(25.2)*
(0.3)
1
8
13 max.
(12.7)*
5
1
25.5 max.
(25.3)*
(0.3)
2
3
8
7
6
5
0.3
0.3
7
6
5
(2.1)
1
(No coil polarity)
13 max.
29 max.
(28.8)*
(2.1)
15
(12.7)*
5
(No coil polarity)
25.5 max.
(25.2)*
(0.3)
1
3
6
8
(2.7)
4
5
(2.1)
4
13 max.
(12.7)*
5
25.5 max.
(25.3)*
(0.3)
1
3
Six, 1.3-dia.
holes
(2.7)
4
0.3
6
0.3
1
(No coil polarity)
*Average value
g
13.5 max.
29 max.
(28.6)*
G2R-24
(2.1)
20
1
0.15
(12.8)*
5
5
(2.1)
0.3
0.5
DPDT Relays
DPDT Relays
7.5
8
20
(2.1)
25.5 max.
(24.7)*
1
2
3
5
Eight, 1.3-dia.
holes
(2.7)
4
7.5
(No coil polarity)
8
0.16
*Average value
4
Six, 1.3-dia.
holes
7.5
G2R-1A-E
29 max.
(28.8)*
(2.1)
15
*Average value
SPST-NO/High-capacity Relays
0.3
0.5
0.5
0.15
*Average value
128
(2.7)
4
G2R-2A, G2R-2A-H
*Average value
4
3
0.15
DPST-NO Relays
5
1
0.16
4
0.5
(2.7)
4
(2.1)
0.5
0.5
Eight, 1.3-dia.
holes
7.5
0.3
2
Eight, 1.3-dia.
holes
5
7.5
G2R-1-E
4
Tolerance: ±0.1
5
*Average value
**0.3 (-H Type)
29 max.
(28.8)*
Mounting Holes
(Bottom View)
(No coil polarity)
0.16
SPDT/High-capacity Relays
Terminal Arrangement/
Internal Connections
(Bottom View)
13 max.
(12.7)*
29 max.
(28.8)*
7
6
5
(2.1)
15
(2.1)
1
(No coil polarity)
129
Power Relays
Omron 08 Cat 1-302
5/10/07
15:39
Page 128
Text Power Relay – G2R
PCB
Text Power Relay – G2R
PCB
Dimensions
Relays with PCB Terminals
Terminal Arrangement/
Internal Connections
(Bottom View)
SPDT Relays
Note: 1. All units are in millimetres unless otherwise indicated.
2. Orientation marks are indicated as follows:
G2R-14, G2R-1Z4
13.5 max.
29 max.
(28.6)*
Mounting Holes
(Bottom View)
Tolerance: ±0.1
(12.9)*
3.5 3.5
Relays with PCB Terminals
Terminal Arrangement/
Internal Connections
(Bottom View)
SPDT Relays
G2R-1, G2R-1Z, G2R-1-H
1
(2.7)
3
2
7.5
3.5 3.5
4
0.3
0.5
(2.1)
1
0.5
20
(No coil polarity)
0.16
(2.7)
25.5 max.
(25.3)*
(0.3)
1
7.5
(2.1)
The illustration
shows the
G2R-1.
0.5
0.5**
Five, 1.3-dia.
holes
4
5
4
*Average value
3
2
SPST-NO Relays
G2R-1A4, G2R-1AZ4
13.5 max.
(12.9)*
29 max.
(28.6)*
20
3.5
1
0.3
(No coil polarity)
0.16
1
25.5 max.
(24.8)*
*Average value
**0.3 (-H Type)
SPST-NO Relays
Five, 1.3-dia.
holes
4
5
Tolerance: ±0.1
13 max.
(12.7)*
29 max.
(28.8)*
25.5 max.
(24.8)*
Mounting Holes
(Bottom View)
(2.7)
3
7.5
Four, 1.3-dia.
holes
4
5
(2.1)
G2R-1A, G2R-1AZ, G2R-1A-H
0.5
4
13 max.
(12.7)*
29 max.
(28.8)*
20
1
0.3
(No coil polarity)
0.16
3.5
*Average value
1
25.5 max.
(25.3)*
(2.7)
3
7.5
(0.3)
Four, 1.3-dia.
holes
4
5
(2.1)
The illustration
shows the
G2R-1A.
0.3
4
0.5**
DPDT Relays
G2R-2, G2R-2-H
20
1
Relays with PCB Terminals
25.5 max.
(25.2)*
(0.3)
1
8
13 max.
(12.7)*
5
1
25.5 max.
(25.3)*
(0.3)
2
3
8
7
6
5
0.3
0.3
7
6
5
(2.1)
1
(No coil polarity)
13 max.
29 max.
(28.8)*
(2.1)
15
(12.7)*
5
(No coil polarity)
25.5 max.
(25.2)*
(0.3)
1
3
6
8
(2.7)
4
5
(2.1)
4
13 max.
(12.7)*
5
25.5 max.
(25.3)*
(0.3)
1
3
Six, 1.3-dia.
holes
(2.7)
4
0.3
6
0.3
1
(No coil polarity)
*Average value
g
13.5 max.
29 max.
(28.6)*
G2R-24
(2.1)
20
1
0.15
(12.8)*
5
5
(2.1)
0.3
0.5
DPDT Relays
DPDT Relays
7.5
8
20
(2.1)
25.5 max.
(24.7)*
1
2
3
5
Eight, 1.3-dia.
holes
(2.7)
4
7.5
(No coil polarity)
8
0.16
*Average value
4
Six, 1.3-dia.
holes
7.5
G2R-1A-E
29 max.
(28.8)*
(2.1)
15
*Average value
SPST-NO/High-capacity Relays
0.3
0.5
0.5
0.15
*Average value
128
(2.7)
4
G2R-2A, G2R-2A-H
*Average value
4
3
0.15
DPST-NO Relays
5
1
0.16
4
0.5
(2.7)
4
(2.1)
0.5
0.5
Eight, 1.3-dia.
holes
7.5
0.3
2
Eight, 1.3-dia.
holes
5
7.5
G2R-1-E
4
Tolerance: ±0.1
5
*Average value
**0.3 (-H Type)
29 max.
(28.8)*
Mounting Holes
(Bottom View)
(No coil polarity)
0.16
SPDT/High-capacity Relays
Terminal Arrangement/
Internal Connections
(Bottom View)
13 max.
(12.7)*
29 max.
(28.8)*
7
6
5
(2.1)
15
(2.1)
1
(No coil polarity)
129
Power Relays
Omron 08 Cat 1-302
5/10/07
15:39
Page 130
Text Power Relay – G2R
PCB
Text Power Relay – G2R
PCB
DPST-NO Relays
Relays with Quick-connect Terminals
13.5 max.
29 max.
(28.6)*
G2R-2A4
(12.8)*
Six, 1.3-dia.
holes
5
25.5 max.
(24.7)*
1
3
G2R-1-T
7.5
6
8
0.5
0.3
1
(2.7)
4
2
5.2
17.4
Five, 1.3-dia. holes
4.75
7.5
4
5
1
(2.1)
(2.1)
20
25.5 max.
(25.2)*
(0.3)
+
1
S
7
+
2
4
3
7.5
R
Seven, 1.3-dia.
holes
5
6
0.5
45 max.
(43.9)*
*Average value
SPST-NO Relays
7.5
20
1
1
Five, 1.3-dia. holes
8.5
+
*Average value
7
+
2
(2.7)
7.5
5
6
0.3
0.18
1
3
4
5
8
7
6
5
(2.7)
(2.1)
■
(After confirming coil
polarity, wire correctly.)
5
1 2
+ S+ R
10 9
(0.3)
4
7
5
Six, 1.3-dia.
holes
5
6
Note: Model number of quick-connect terminal
is 187.
Mounting
When mounting a number of relays on a PCB, be sure to provide
a minimum mounting space of 5 mm between the two juxtaposed
relays as shown below.
(2.1)
25.5 max.
14 max.
(13.1)*
Precautions
10
13 max.
29 max.
45 max.
(43.9)*
(2.7)
0.15
DPST-NO Relays
Eight, 1.3-dia.
holes
5
7.5
1
0.18
*Average value
20
5
1 2
+ S+ R
10 9
2.5
Six, 1.3-dia.
holes
(After confirming coil
polarity, wire correctly.)
25.5 max.
(25.2)*
(0.3)
*Average value
29.5 max.
4
R
Two M3 or two 3.5 dia.
3.5
(2.1)
G2RK-2
G2RK-2A
S
13 max.
(12.8)*
29 max.
(28.8)*
DPDT Relays
4
1
38
Mounting Holes
(Bottom View)
Tolerance: ±0.1
Terminal Arrangement/
Internal Connections
(Bottom View)
1
(No coil polarity)
0.5
Mounting Holes (Bottom View)
5
0.5
0.16
3
5
17.4
13 max.
(12.8)*
4
5.2
(After confirming coil
polarity, wire correctly.)
25.5 max.
(25.2)*
(0.3)
0.3
1
Terminal Arrangement/Internal Connections
(Bottom View)
G2R-1A-T
4.75
29 max.
(28.8)*
14 max.
(13.1)*
30.5 max.
(29.7)*
Double-winding Latching Relays with PCB Terminals
4
Two M3 or two 3.5 dia.
2.5
(2.7)
*Average value
G2RK-1A
Mounting Holes (Bottom View)
Tolerance: ±0.1
38
3.5 3.5
(2.1)
SPST-NO Relays
(No coil polarity)
0.5
29.5 max.
5
0.3
1
3
13 max.
(12.8)*
29 max.
(28.8)*
4
4
5
(No coil polarity)
Double-winding Latching Relays with PCB Terminals
G2RK-1
5.2
8.5
0.15
*Average value
SPDT Relays
Terminal Arrangement/Internal Connections
(Bottom View)
30.5 max.
(29.7)*
SPDT Relays
Power Relays
Omron 08 Cat 1-302
5 mm min.
The above minimum mounting space is necessary due to mutual
thermal interference generated by the relays. This restriction may
be ignored, however, depending on the operating conditions of
the relays. Consult OMRON for details.
There is no restriction on the mounting direction of each relay on
the PCB.
When using this circuit, confirm the set and reset states and then
take into account the circuit constant.
(2.7)
7.5
(2.7)
(2.1)
15
5 mm min.
(2.1)
4
0.3
1
0.18
0.15
1
(After confirming coil
polarity, wire correctly.)
CAT. No. K013-E2-12A-X
130
131
5/10/07
15:39
Page 130
Text Power Relay – G2R
PCB
Text Power Relay – G2R
PCB
DPST-NO Relays
Relays with Quick-connect Terminals
13.5 max.
29 max.
(28.6)*
G2R-2A4
(12.8)*
Six, 1.3-dia.
holes
5
25.5 max.
(24.7)*
1
3
G2R-1-T
7.5
6
8
0.5
0.3
1
(2.7)
4
2
5.2
17.4
Five, 1.3-dia. holes
4.75
7.5
4
5
1
(2.1)
(2.1)
20
25.5 max.
(25.2)*
(0.3)
+
1
S
7
+
2
4
3
7.5
R
Seven, 1.3-dia.
holes
5
6
0.5
45 max.
(43.9)*
*Average value
SPST-NO Relays
7.5
20
1
1
Five, 1.3-dia. holes
8.5
+
*Average value
7
+
2
(2.7)
7.5
5
6
0.3
0.18
1
3
4
5
8
7
6
5
(2.7)
(2.1)
■
(After confirming coil
polarity, wire correctly.)
5
1 2
+ S+ R
10 9
(0.3)
4
7
5
Six, 1.3-dia.
holes
5
6
Note: Model number of quick-connect terminal
is 187.
Mounting
When mounting a number of relays on a PCB, be sure to provide
a minimum mounting space of 5 mm between the two juxtaposed
relays as shown below.
(2.1)
25.5 max.
14 max.
(13.1)*
Precautions
10
13 max.
29 max.
45 max.
(43.9)*
(2.7)
0.15
DPST-NO Relays
Eight, 1.3-dia.
holes
5
7.5
1
0.18
*Average value
20
5
1 2
+ S+ R
10 9
2.5
Six, 1.3-dia.
holes
(After confirming coil
polarity, wire correctly.)
25.5 max.
(25.2)*
(0.3)
*Average value
29.5 max.
4
R
Two M3 or two 3.5 dia.
3.5
(2.1)
G2RK-2
G2RK-2A
S
13 max.
(12.8)*
29 max.
(28.8)*
DPDT Relays
4
1
38
Mounting Holes
(Bottom View)
Tolerance: ±0.1
Terminal Arrangement/
Internal Connections
(Bottom View)
1
(No coil polarity)
0.5
Mounting Holes (Bottom View)
5
0.5
0.16
3
5
17.4
13 max.
(12.8)*
4
5.2
(After confirming coil
polarity, wire correctly.)
25.5 max.
(25.2)*
(0.3)
0.3
1
Terminal Arrangement/Internal Connections
(Bottom View)
G2R-1A-T
4.75
29 max.
(28.8)*
14 max.
(13.1)*
30.5 max.
(29.7)*
Double-winding Latching Relays with PCB Terminals
4
Two M3 or two 3.5 dia.
2.5
(2.7)
*Average value
G2RK-1A
Mounting Holes (Bottom View)
Tolerance: ±0.1
38
3.5 3.5
(2.1)
SPST-NO Relays
(No coil polarity)
0.5
29.5 max.
5
0.3
1
3
13 max.
(12.8)*
29 max.
(28.8)*
4
4
5
(No coil polarity)
Double-winding Latching Relays with PCB Terminals
G2RK-1
5.2
8.5
0.15
*Average value
SPDT Relays
Terminal Arrangement/Internal Connections
(Bottom View)
30.5 max.
(29.7)*
SPDT Relays
Power Relays
Omron 08 Cat 1-302
5 mm min.
The above minimum mounting space is necessary due to mutual
thermal interference generated by the relays. This restriction may
be ignored, however, depending on the operating conditions of
the relays. Consult OMRON for details.
There is no restriction on the mounting direction of each relay on
the PCB.
When using this circuit, confirm the set and reset states and then
take into account the circuit constant.
(2.7)
7.5
(2.7)
(2.1)
15
5 mm min.
(2.1)
4
0.3
1
0.18
0.15
1
(After confirming coil
polarity, wire correctly.)
CAT. No. K013-E2-12A-X
130
131
