G3FM2R5SLNDC24

Solid-state Relay G3FM 100-µA-max. Leakage Current, No Bleeder Resistor Required 1 mA to 500 mA micro-load switching. Switches to both AC and DC with no polarity. Switches for a wide range of voltages; 19.2 to 264 VAC, 19.2 to 125 VDC. Switches full- and half-wave rectifier AC loads. Same sizes and terminal arrangement as OMRON Power Relay MY Series. Operating indicator provided. Switches MY Series (without bleeder resistor). Superior surge absorption with a built-in varistor. Optimum SSR to control minute load, valves, and solenoids. Ordering Information Isolation Zero cross function Photo-voltage o o o age l coupler No o Indicator Yes es Applicable output load Rated input voltage 0.5 at 19.2 0 5Aa 9 to o 264 6 VAC C 5 VDC 0.5 A at 19.2 to 125 VDC 12 VDC Model G3FM-2R5SLN G3 5S 24 VDC Accessories (Order Separately) Connecting Socket Refer to page 244 for details. Item PYF08A-E PY08 PY08-02 Connecting Front connecting Back connecting Mounting method/ Terminal type Track mounted/ screw terminals Solder terminals Hold-down clip PYC-A1 PYC-P PY08QN(2) PCB terminals Wrapping terminals Specifications Ratings Model Input Rated voltage Operating voltage Impedance Output Voltage levels Must operate voltage G3FM-2R5SLN 5 VDC 4 to 6 VDC 250 Ω±20% 4 VDC max. 12 VDC 9.6 to 14.4 VDC 600 Ω±20% 9.6 VDC max. 24 VDC 19.2 to 28.8 VDC 1.2 kΩ±20% 19.2 VDC Must release voltage 1 VDC min. Applicable load Rated load voltage Load voltage Load curent 24 to 240 VAC 19.2 to 264 VAC 1 to 500 mA 24 to 110 VDC 19.2 to 125 VDC Inrush current 6A (10 ms) 191 G3FM G3FM Characteristics Operate time 5 ms max. Release time 10 ms max. Output ON voltage drop 3 V (RMS) max. Leakage current 0.1 mA max. Insulation resistance 100 MΩ min. (at 500 VDC) Dielectric strength 1,500 VAC, 50/60 Hz for 1 min Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude Shock resistance 1,000 m/s2 Ambient temperature Operating: –30°C to 80°C (with no icing or condensation) Storage: –30°C to 100°C (with no icing or condensation) Ambient humidity Operating: 45% to 85% Weight Approx. 50 g Engineering Data Load Current vs. Ambient Temperature Characteristics G3FM-2R5SLN Inrush Current Resistivity Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.) Load current (A) Inrush current (A. Peak) G3FM-2R5SLN Ambient temperature (°C) Energizing time (ms) Dimensions Note: All units are in millimeters unless otherwise indicated. Terminal Arrangement/ Internal Connections (Bottom View) 1 28 max. 4 5 21.5 max. 9 36.5 max. 42.5 max. 13 8 Load Input – – 192 Load Load power supply 12 14 + Input voltage + G3FM G3FM Precautions Refer to pages 11 to 19 for general precautions. The SSR case serves to dissipate heat. Install the relays so that they are adequately ventilated. If poor ventilation is unavoidable, reduce the load current by half. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. K072-E1-1A 193