G3H203SNDC524

Solid-state Relay G3H/G3HD Plug-in Type Power Relays (Same as the LY Series) Available in 2 types, DC input-AC input and DC input-DC output. Same sizes and terminal arrangement as LY Series. Operating indicator provided Ordering Information Isolation Zero cross function Photocoupler Yes Phototriac o o ac coupler cou e No Indicator Yes Rated output load (Applicable output load) at 100 3Aa 00 to o 240 0 VAC C t 264 VAC) (3 A att 75 to (see note 2) Rated input voltage Model 5 to 24 VDC G3H-203SN 5 VDC G3H-203SLN 12 VDC 24 VDC Photocoupler No Photocoupler Yes Phototriac o o ac coupler cou e No No 3 A at 4 to 48 VDC (3 A at 3 to 52.8 VDC) (see note 3) 5 to 24 VDC G3HD-X03SN 3Aa at 100 00 to o 240 0 VAC C (3 A att 75 to t 264 VAC) (see note 2) 4 to 24 VDC G3H-203S 5 VDC G3H-203SL 12 VDC 24 VDC Photocoupler Note: No 3 A at 4 to 48 VDC (3 A at 3 to 52.8 VDC) (see note 3) 4 to 24 VDC G3HD-X03S 1. Models to be used with a full-wave rectifier can be ordered by adding “-V” after the model number. This rectifier is available only on models without the zero cross function (e.g., G3H-203SL-V). 2. Product is labelled “250 VAC”. 3. Product is labelled “50 VAC”. Accessories (Order Separately) Connecting Socket Refer to page 244 for details. Item PTF08A-E PT08 Connecting Front connecting Back connecting Mounting method/ Terminal type Track mounted screw terminals Solder terminals Hold-down clip PYC-A1 PYC-P PT08-0 PCB terminals PT08QN Wire-wrapping terminals 197 G3H/G3HD G3H/G3HD Specifications Ratings Input Model Rated voltage Operating voltage Impedance Voltage level Must operate voltage Must release voltage G3H-203SN 5 to 24 VDC 4 to 28 VDC 1.5 kΩ +20%/–10%* 4 VDC max. 1 VDC min. G3H-203SLN 5 VDC 4 to 6 VDC 390 Ω±20% 4 VDC max. 1 VDC min. 12 VDC 9.6 to 14.4 VDC 900 Ω±20% 9.6 VDC max. 24 VDC 19.2 to 28.8 VDC 2 kΩ±20% 19.2 VDC max. G3HD-X03SN 5 to 24 VDC 4 to 28 VDC 1.5 kΩ +20%/–10%* 4 VDC max. 1 VDC min. G3H-203S 4 to 24 VDC 3 to 28 VDC 1.5 kΩ +20%/–10%* 3 VDC max. 1 VDC min. G3H-203SL 5 VDC 4 to 6 VDC 390 Ω±20% 4 VDC max. 1 VDC min. 12 VDC 9.6 to 14.4 VDC 900 Ω±20% 9.6 VDC max. 24 VDC 19.2 to 28.8 VDC 2 kΩ±20% 19.2 VDC max. 4 to 24 VDC 3 to 28 VDC 1.5 kΩ +20%/–10%* 3 VDC max. G3HD-X03S 1 VDC min. *Input impedance is the maximum value at the operating voltage. Output Model Applicable load Rated voltage G3H-203SN G3H-203S Voltage range Load current Inrush current 100 to 240 VAC 75 to 264 VAC 0.1 to 3 A 45 A 60 Hz, 1 cycle 4 to 48 VDC 3 to 52.8 VDC 0.1 to 3 A 18 A (10 ms) G3H-203SLN G3H-203SL G3HD-X03SN G3HD-X03S Characteristics Model G3H-203SN/203S G3H-203SLN/203SL 1/2 cycle of load power source + 1 ms max. Release time 1/2 cycle of load power source + 1 ms max. 2 ms max. Output ON voltage drop 1.6 V (RMS) max. 1.5 V max. Leakage current 5 mA max. (at 100 VAC); 10 mA max. (at 200 VAC) Insulation resistance 100 MΩ min. (at 500 VDC) Dielectric strength 1,500 VAC, 50/60 Hz for 1 min Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude Shock resistance 1,000 m/s2 Ambient temperature Operating: –30°C to 80°C (with no icing) Storage: –30°C to 100°C (with no icing) Ambient humidity 45% to 85% Weight Approx. 50 g 198 1 ms max. G3HD-X03SN/X03S Operate time 2.5 mA max. (at 100 VAC); 5 mA max. (at 200 VAC) 0.5 ms max. 5 mA max. (at 50 VDC) G3H/G3HD G3H/G3HD Engineering Data Load Current vs. Ambient Temperature Characteristics Inrush Current Resistivity G3H-203SN/203S/203SLN/203SL G3HD-X03SN/X03S G3H-203SN/203S/203SLN/G3H-203SL G3HD-X03SN/X03S Inrush current (A) Load current (A) Inrush current (A, Peak) Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.) Energizing time (ms) Ambient temperature (°C) Energizing time (ms) Dimensions Note: All units are in millimeters unless otherwise indicated. Terminal Arrangement/ Internal Connections (Bottom View) 2 1 4(+) 3 28 max. 5 21.5 max. Load Load (+) 6(–) (–) 36.5 max. 42.5 max. 7 Input – 8 + – Input voltage Note: + 1. The plus and minus symbols shown in the parentheses are for DC loads. 2. The coil has no polarity. Precautions Refer to pages 11 to 19 for general precautions. The SSR case serves to dissipate heat. Install the relays so that they are adequately ventilated. If poor ventilation is unavoidable, reduce the load current by half. Protective Component Since the SSR does not incorporate an overvoltage absorption component, be sure to connect an overvoltage absorption component when using the SSR under an inductive load. Connection With the SSR for DC switching, the load can be connected to either positive or negative output terminal of the SSR. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. K057-E1-4A 199