G3NE-220TL-2-US

Solid-state Relay G3NE Compact, Low-cost, SSR Switching 5 to 20 A • Wide load voltage range: 75 to 264 VAC. Both 100-V and 200V loads can be handled with the same model. • Dedicated, compact aluminum PCB and power elements used. • Built-in varistor effectively absorbs external surges. • Quick-connect #110 input terminals and #250 output connections. • UL, CSA, and IEC/EN (TÜV) approval obtained for “-US” models. Ordering Information I List of Models Isolation Phototriac Yes Zero cross function No Indicator Rated output load 5 A at 100 to 240 VAC 10 A at 100 to 240 VAC 20 A at 100 to 240 VAC No 5 A at 100 to 240 VAC 10 A at 100 to 240 VAC 20 A at 100 to 240 VAC Rated input voltage 5, 12, 24 VDC Model G3NE-205T G3NE-205T-US G3NE-205T-2-US G3NE-210T G3NE-210T-US G3NE-210T-2-US G3NE-220T G3NE-220T-US G3NE-220T-2-US G3NE-205TL G3NE-205TL-US G3NE-205TL-2-US G3NE-210TL G3NE-210TL-US G3NE-210TL-2-US G3NE-220TL G3NE-220TL-US G3NE-220TL-2-US Note: When ordering, specify the input voltage. I Accessories (Order Separately) Heat Sinks Model Y92B-N50 Y92B-N100 Applicable SSR G3NE-205T(L)(-2)(-US)/-210T(L)(-2)(-US) G3NE-220T(L)(-2)(-US) SSR Input impedance With zero cross function Without zero cross function 250 Ω±20% 600 Ω±20% 1.6 kΩ±20% 300 Ω±20% 800 Ω±20% Must release 1 VDC min. The following heat sinks are thin and can be DIN-track mounted. See Dimensions for details. Specifications I Ratings Input Rated voltage 5 VDC 12 VDC 24 VDC Operating voltage 4 to 6 VDC 9.6 to 14.4 VDC 19.2 to 28.8 VDC 4 VDC max. 9.6 VDC max. 19.2 VDC max. Voltage level Must operate Note: Each model has 5-VDC, 12-VDC, and 24-VDC input versions. Solid-state Relay G3NE J-17 Output Model Rated load voltage Load voltage range Applicable load Load current (See note 1.) With heat sink G3NE-205T(L)-(-2)(US) G3NE-210T(L)-(-2)(US) G3NE-220T(L)-(-2)(US) 100 to 240 VAC 75 to 264 VAC 0.1 to 5 A 0.1 to 10 A (See note 2.) 0.1 to 20 A (See note 2.) Without heat sink 0.1 to 5 A 0.1 to 5 A 0.1 to 5 A 60 A (60 Hz, 1 cycle) 150 A (60 Hz, 1 cycle) 220 A (60 Hz, 1 cycle) Inrush current Note: 1. The load current varies depending on the ambient temperature. Refer to Load Current vs. Ambient Temperature under Engineering Data for details. 2. These values apply when using a dedicated radiator or a radiation plate of specified size. I Characteristics Item Operate time Release time Output ON voltage drop Leakage current Insulation resistance Dielectric strength Vibration resistance Shock resistance Ambient temperature Ambient humidity Approved standards (only for -US models) Weight G3NE-2@@T-(-2)(US) 1/2 of load power source cycle + 1 ms max. 1/2 of load power source cycle + 1 ms max. 1.6 V (RMS) max. 2 mA max. (at 100 VAC) 5 mA max. (at 200 VAC) 100 MΩ min. (at 500 VDC) 2,000 VAC, 50/60 Hz for 1 min Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude) Destruction: 1,000 m/s2 Operating: –30°C to 80°C (with no icing or condensation) Storage: –30°C to 100°C (with no icing or condensation) Operating: 45% to 85% UL508 File No.E64562/CSA C22.2 (No.0, No.14) File No. LR35535 TÜV R9051064 (VDE0435) (EN60950) Approx. 37 g 1 ms max. G3NE-2@@TL-(-2)(US) Engineering Data Load Current vs. Ambient Temperature G3NE-205T(L)-(-2)(US) Without heat sink G3NE-210T(L)-(-2)(US) With standard heat sink (Y92B-N50) or aluminum plate measuring 100 mm x 100 mm x t2 mm (W x H x D) G3NE-220T(L)-(-2)(US) With standard heat sink (Y92B-N100) or aluminum plate measuring 300 mm x 300 mm x t3 mm (W x H x D) Load current (A) Load current (A) Without heat sink Load current (A) Without heat sink Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C) J-18 Solid-state Relay G3NE Inrush Current Resistivity: Non-repetitive Note: Keep the inrush current to half the rated value if it occurs repetitively. G3NE-205T(L)-(-2)(US) Inrush current (A. Peak) Inrush current (A. Peak) G3NE-210T(L)-(-2)(US) Inrush current (A. Peak) Energizing time (ms) G3NE-220T(L)-(-2)(US) Energizing time (ms) Energizing time (ms) Dimensions Note: All units are in millimeters unless otherwise indicated. G3NE-205T(L)/210T(L)/220T(L)-(-2)(US) 3.5 dia. hole 47.5 max. Terminal Arrangement/ Internal Connections (Top View) 3+ Input voltage Input Output 37.5 max. 14.5 1 Load 30+0.5 Two #250 (t = 0.8) (Faston tab or equivalent) 7.95 3 11.5 max. Two #110 (t = 0.5) (Faston tab or equivalent)* 7.1 2.9 6 6.5 4− 2 Load power supply Mounting Holes * G3NE-2@@T(L)-2-US: Two, #187 (t=0.5) (Faston tab or equivalent) 30±0.2 Two, 3.5-dia. or M3 holes Heat Sink Y92B-N50 Mounting Holes 4.6 dia. hole Two, M3 holes Two, M4 holes Two, 3.2-dia. holes 44 max. 30 47 max. Two, 4.4-dia. or M4 holes 35 30.5±0.3 90±0.4 47.6 77 max. 90±0.3 100 max. 5.6 5 6 51 max. 4.5 Weight: approx. 200 g 35±0.2 Two, M4 holes Two, 3.2-dia. holes Y92B-N100 4.6 dia. hole Two, M3 holes Mounting Holes 35 30.5±0.3 71 max. 30 75 max. 90±0.4 47.6 77 max. 90±0.3 100 max. 5.6 28 5 100 max. 13 4.5 Two, 4.4-dia. or M4 holes 35±0.2 Weight: approx. 400 g Solid-state Relay G3NE J-19 SSR Precautions Refer to the Technical Information for SSRs (Cat. No. J137) for general precautions. I Correct Use Do not apply excessive force to the terminals. Exercise care when pulling or inserting the terminal clips for the Quick Connector (QC). When attaching a heat sink to the G3NE, in order to facilitate heat dissipation, apply heat conductive grease on the heat sink. Tighten the mounting screws of the heat sink with a torque of 0.59 to 0.98 N·m. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. K062-E1-03 In the interest of product improvement, specifications are subject to change without notice. J-20 Solid-state Relay G3NE