MOS FET Relays
G3VM-201G1
Ultrasensitive MOS FET Relay in 200 V Load series for power savings, SOP Package.
• Trigger LED forward current of 1 mA (maximum) facilitates power saving designs and prolonged battery life. • Continuous load current of 200 mA. • RoHS Compliant
■ Application Examples
• Broadband systems and Measurement devices • Security systems • Industrial equipment • Battery powered equipment and Amusement machines
Note: The actual product is marked differently from the image shown here.
■ List of Models
Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) (See the note.) 200 V Model G3VM-201G1 G3VM-201G1(TR) Number per stick 100 --Number per tape --2,500
Note: The AC peak and DC value are given for the load voltage.
■ Dimensions
Note: All units are in millimeters unless otherwise indicated. G3VM-201G1
4.4±0.25
3.9±0.25
2.1 max. 0.15
Note: The actual product is marked differently from the image shown here.
0.4±0.1 2.54±0.25
0.1±0.1
0.6±0.3 7.0±0.4
Weight: 0.1 g
■ Terminal Arrangement/Internal Connections (Top View)
G3VM-201G1
4 3 4 3
Mold pin mark OMRON logo Pin 1 mark
1 2 1 2
Model name LOT No.
Note: The actual product is marked differently from the image shown here.
■ Actual Mounting Pad Dimensions (Recommended Value, Top View)
G3VM-201G1
6 to 6.3 1.2
0.8 2.54
MOS FET Relays
G3VM-201G1
165
■ Absolute Maximum Ratings (Ta = 25°C)
Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Output Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Connection temperature Dielectric strength between input and output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) Symbol IF IFP Δ IF/°C VR Tj VOFF IO Δ IO/°C Tj VI-O Ta Tstg --Rating 50 1 −0.5 5 125 200 200 −2.0 125 1,500 −40 to +85 Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Ta ≥ 25°C 100 μs pulses, 100 pps Ta ≥ 25°C Measurement Conditions Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side.
−55 to +100 °C 260 °C
■ Electrical Characteristics (Ta = 25°C)
Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Symbol VF IR CT IFT RON Minimum 1.0 --------------1,000 ----Typical 1.15 --30 0.4 5 1 90 0.8 --3 0.6 Maximum 1.3 10 --1 8 1000 ------8 3 Unit V μA pF mA Ω nA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz
2 3
Note:
2. Turn-ON and Turn-OFF Times
IF 1 4 RL VDD VOUT
IO = 200 mA IF = 2 mA, IO = 200 mA VOFF = 200 V, Ta = 25°C V = 0, f = 1MHz f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH ≤ 60% IF = 2 mA, RL = 200 Ω, VDD = 20 V (See note 2.)
IF
Current leakage when the relay is open ILEAK Capacity between terminals Capacity between I/O terminals Insulation resistance Turn-ON time Turn-OFF time COFF CI-O RI-O tON tOFF
VOUT
10% t ON
90% t OFF
■ Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Item Load voltage (AC peak/DC) Operating LED forward current Symbol VDD IF Minimum ------−20 --2 ----Typical Maximum 160 25 160 65 V mA mA °C Unit
Continuous load current (AC peak/DC) IO Operating temperature Ta
166
MOS FET Relays
G3VM-201G1
■ Engineering Data
LED forward current vs. Ambient temperature
IF - Ta
LED forward current IF (mA) Continuous load current I O (mA)
60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 250
Continuous load current vs. Ambient temperature
IO - Ta
LED forward current I F (mA)
LED forward current vs. LED forward voltage
IF - VF
100
Ta = 2 5
200
10
150
100
1
50
0 -40 -20 0 20 40 60 80 100
0.1 0.8
0.9
1.0
1.1
1.2
1.3
1.4
Ambient temperature Ta (
)
Ambient temperature Ta
LED forward voltage VF (V)
Continuous load current vs. On-state voltage
IO - VON
Continuous load current IO (mA)
200 150 100 50 0 -50 -100 -150 -200 -250 -1.0 -0.5 0.0 0 0.5 1.0
On-state resistance vs. Ambient temperature
RON - Ta
Trigger LED forward current I F T (mA) On-state resistance RON (Ω)
7 6 5 4 3 2 1 0 -40 -20 0 20 40 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0.0
Trigger LED forward current vs. Ambient temperature
IFT - Ta
IO = 200mA t < 1s
250
T a = 25 IF = 2mA
IO = 200mA IF = 2mA t < 1s 60 80
100
-40
-20
0
20
40
60
80
100
On-state voltage VON (V)
Ambient temperature Ta (
)
Ambient temperature Ta (
)
Turn ON, Turn OFF time vs. LED forward current
tON, tOFF - IF
10
Turn ON, Turn OFF time vs. Ambient temperature
tON, tOFF - Ta
Turn ON, Turn OFF time tON, tOFF (mS)
V DD = 20V R L = 200 Ω IF = 2mA
Current leakage vs. Ambient temperature
I LEAK - Ta
Current leakage ILEAK (nA)
100 10
V = 200V OFF
Turn ON, Turn OFF time tON, tOFF (mS)
10
1
tOFF
tON
1
1
0.1
tOFF
0.1
V DD = 20V R L = 200 Ω
0.01 0.1
tON
0.01
T a = 25
1 10 100
0.1 -40
-20
0
20
40
60
80
100
0.001 -40
-20
0
20
40
60
80
100
LED forward current IF (mA)
Ambient temperature Ta (
Ambient temperature Ta (
)
MOS FET Relays
G3VM-201G1
167
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ELECTRONIC COMPONENTS LLC
55 E. Commerce Drive, Suite B Schaumburg, IL 60173
OMRON ON-LINE
Global - http://www.omron.com USA - http://www.components.omron.com
847-882-2288
Cat. No. X302-E-1 12/10 Specifications subject to change without notice Printed in USA
MOS FET Relays
G3VM-201G1
很抱歉,暂时无法提供与“G3VM-201G1”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 1+21.08253
- 10+19.48166
- 25+18.24820
- 50+18.07324
- 100+17.67958
- 250+16.77855
- 300+16.68232