G3VM-21GR1_1

MOS FET Relays G3VM-21GR1 MOS FET Relay with Low Output Capacitance and ON Resistance (C×R = 5pF• Ω) in a 20-V Load Voltage, SOP Package. • ON resistance of 1 Ω (typical) suppresses output signal attenuation. • Leakage current of 1.0 nA max. (0.2 nA typ.) when relay is open. • RoHS Compliant. ■ Application Examples • • • • Semiconductor inspection tools Measurement devices Broadband systems Data loggers Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) 20 VAC Model G3VM-21GR1 G3VM-21GR1(TR) Number per stick 100 --2,500 Number per tape ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-21GR1 4.4±0.25 3.9±0.2 2.1 max. 0.15 Note: The actual product is marked differently 0.4±0.1 from the image shown here. 2.54±0.25 0.1±0.1 0.6±0.3 7.0±0.4 Weight: 0.1 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-21GR1 4 3 1 2 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-21GR1 6 to 6.3 1.2 0.8 2.54 MOS FET Relays G3VM-21GR1 93 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Output Load voltage (AC peak/DC) Continuous load current ON current reduction rate Connection temperature Symbol IF IFP Δ IF/°C VR Tj VOFF IO Rating 50 1 −0.5 5 125 20 300 Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Ta ≥ 25°C 100 μs pulses, 100 pps Ta ≥ 25°C Measurement conditions Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Δ ION/°C −3.0 Tj 125 1,500 −20 to +85 Dielectric strength between input and VI-O output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) Ta Tstg --- −55 to +125 °C 260 ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Symbol VF IR CT IFT RON Minimum 1.0 --------------1,000 ----Typical 1.15 --15 --1 0.2 5.0 0.8 --0.09 0.2 Maximum 1.3 10 --4 1.5 1.0 12.0 ----0.5 0.5 Unit V μA pF mA Ω nA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz 2 3 Note: 2. Turn-ON and Turn-OFF Times IF 1 4 RL VDD VOUT IO = 100 mA IF = 5 mA, IO = 300 mA, t < 1 s IF Current leakage when the relay is open ILEAK Capacity between terminals Capacity between I/O terminals Insulation resistance Turn-ON time Turn-OFF time COFF CI-O RI-O tON tOFF VOFF = 20 V Ta = 50°C V = 0, f = 100 MHz, t