G3VM-21LR(TR10)

G3VM-21LR MOS FET Relays World’s Smallest * SSOP Package MOS FET Relays with Low Output Capacitance and ON Resistance (C × R = 5 pF • Ω) in a 20-V Load Voltage Model. • Output capacitance of 1 pF (typical) allows high-frequency applications. * As of March 2011 Survey by OMRON Note: The actual product is marked differently from the image shown here. RoHS compliant ■ Application Examples ■ Terminal Arrangement/Internal Connections • Semiconductor test equipment • Test & Measurement equipment 4 3 • Communication equipment 416 • Data loggers Model name OMRON mark LOT.No. 612 1 2 Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form Load voltage (peak value) * Terminals Model Minimum package quantity Number per tape and reel G3VM-21LR SSOP4 1a (SPST-NO) Surface-mounting Terminals 20 V - G3VM-21LR (TR05) 500 G3VM-21LR (TR10) 1,000 G3VM-21LR (TR) 1,500 Note: Ask your OMRON representative for orders under 1,500 pcs, 1,000 pcs, or 500 pcs. We can supply products with the tape already cut. Tape-cut SSOPs are packaged without humidity resistance. Use manual soldering to mount them. Refer to common precautions. * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25 °C) Output Input Item LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF ∆IF/°C VR TJ VOFF IO ∆IO/°C TJ Rating 50 −0.5 5 125 20 160 −1.6 125 Unit mA mA/°C V °C V mA mA/°C °C VI-O 1500 Vrms Ta Tstg - −20 to +85 −40 to +125 260 °C °C °C Measurement conditions Ta ≥ 25 °C Ta ≥ 25 °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. ■ Electrical Characteristics (Ta = 25 °C) Output Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.0 1.15 1.3 Reverse current IR 10 Capacity between terminals CT 15 Trigger LED forward current IFT 4 Maximum resistance with output ON RON 5 8 Current leakage when the relay is open ILEAK 1.0 Capacity between terminals COFF 1 2.5 Capacity between I/O terminals CI-O 0.8 Insulation resistance between I/O terminals RI-O 1000 Turn-ON time tON 0.06 0.5 Turn-OFF time tOFF 0.12 0.5 1 Unit V µA pF mA Ω nA pF pF MΩ ms ms Measurement conditions Note: 2. Turn-ON and Turn-OFF Times IF = 10 mA IF 1 VR = 5 V 4 RL VDD V = 0, f = 1 MHz VOUT 2 3 IO = 100 mA IF = 5 mA, IO = 160 mA, t = 10 ms VOFF = 20 V, Ta = 50 °C V = 0, f = 100 MHz, t < 1 s IF f = 1 MHz, VS = 0 V VI-O = 500 VDC, ROH ≤ 60 % 90% VOUT 10% IF = 5 mA, RL = 200 Ω, t ON t OFF VDD = 10 V (See note 2.) G3VM-21LR MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) Operating LED forward current Continuous load current (AC peak/DC) Ambient operating temperature VDD IF IO Ta 10 25 - 20 30 160 60 V mA mA °C ■ Engineering Data IO - Ta 100 80 60 40 LED forward current vs. LED forward voltage IF - VF 280 LED forward current IF (mA) Continuous load current IO (mA) Continuous load current vs. Ambient temperature IF - Ta LED forward current IF (mA) LED forward current vs. Ambient temperature 240 200 160 120 100 Ta = 25 °C 50 30 10 5 3 1 80 0.5 20 0.3 40 0 -20 0 0 40 20 80 60 100 120 0.1 -20 0 20 40 Ambient temperature Ta (°C) Continuous load current vs. On-state voltage 0.6 120 0.8 1 100 50 0 -50 1.6 1.8 IFT - Ta Trigger LED forward current IFT (mA) Ta = 25 °C IF = 5 mA 1.4 LED forward voltage VF (V) RON - Ta 200 1.2 On-state resistance vs. Ambient temperature Trigger LED forward current vs. Ambient temperature On-state resistance RON (Ω) Continuous load current IO (mA) 100 Ambient temperature Ta (°C) IO - VON 150 80 60 10 IO = 160 mA IF = 5 mA t