G3VM-21LR

MOS FET Relays G3VM-21LR World’s Smallest SSOP Package MOS FET Relay* with Low Output Capacitance and ON Resistance (C×R = 5pF• Ω) in a 20-V Load Voltage Model • Output capacitance of 1 pF (typical) allows high frequency applications. • RoHS Compliant. *Information correct as of May, 2007, according to data obtained by OMRON. ■ Application Examples • Semiconductor inspection tools • Measurement devices and Data loggers • Broadband systems Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) 20 VAC Model G3VM-21LR G3VM-21LR(TR) G3VM-21LR(TR05) G3VM-21LR(TR10) Number per tape --1,500 500 1,000 ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-21LR 4.2 228 1.7 1.4 dia. 3.5 0.15 0.3 1.27 2.04 0.2 3.8 0.46±0.2 1.8 Note: A tolerance of ±0.1 mm applies to all dimensions unless otherwise specified. Note: The actual product is marked differently from the image shown here. Weight: 0.03 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-21LR 4 3 1 2 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-21LR 0.95 3.73 0.8 1.27 MOS FET Relays G3VM-21LR 231 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Output Load voltage (AC peak/DC) Continuous load current ON current reduction rate Connection temperature Symbol IF IFP Δ IF/°C VR Tj VOFF IO Rating 50 1 −0.5 5 125 20 160 Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Ta ≥ 25°C 100 μs pulses, 100 pps Ta ≥ 25°C Measurement conditions Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Δ ION/°C −1.6 Tj 125 1,500 −20 to +85 Dielectric strength between input and VI-O output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) Ta Tstg --- −40 to +125 °C 260 ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Symbol VF IR CT IFT RON Minimum 1.0 --------------1,000 ----Typical 1.15 --15 --5 0.2 1.0 0.8 --0.06 0.12 Maximum 1.3 10 --4 8 1.0 2.5 ----0.5 0.5 Unit V μA pF mA Ω nA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz IO = 100 mA IF = 5 mA, IO = 160 mA, t = 10 ms VOFF = 20 V, Ta = 50°C V = 0, f = 100 MHz, t