G3VM-21LR1(TR10)

G3VM-21LR1 MOS FET Relays World’s Smallest * SSOP Package MOS FET Relays with Low Output Capacitance and ON Resistance (C × R = 5 pF • Ω) in a 20-V Load Voltage Model. • ON resistance of 1 Ω (typical) suppresses output signal attenuation. * As of August 2014 Survey by OMRON Note: The actual product is marked differently from the image shown here. RoHS compliant ■ Application Examples ■ Terminal Arrangement /Internal Connections • Semiconductor test equipment 416 • Test & Measurement equipment Model name OMRON mark • Communication equipment 612 • Data loggers LOT.No. Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form SSOP4 1a (SPST-NO) Load voltage (peak value) * Terminals Surface-mounting Terminals 20 V Model G3VM-21LR1 G3VM-21LR1 (TR05) Minimum package quantity Number per tape and reel 500 Note: Ask your OMRON representative for orders under 500 pcs. We can supply products with the tape already cut. Tape-cut SSOPs are packaged without humidity resistance. Use manual soldering to mount them. Refer to common precautions. * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25 °C) Output Input Item LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Pulse ON current Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF ΔIF/°C VR TJ VOFF IO ΔIO/°C Iop TJ Rating 50 −0.5 5 125 20 450 −4.5 1.35 125 Unit mA mA/°C V °C V mA mA/°C A °C VI-O 1500 Vrms Ta Tstg - −20 to +85 −40 to +125 260 °C °C °C Measurement conditions Ta ≥ 25 °C Ta ≥ 25 °C t = 100 ms, Duty = 1/10 AC for 1 min With no icing or condensation With no icing or condensation 10 s Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. ■ Electrical Characteristics (Ta = 25 °C) Output Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.0 1.15 1.3 Reverse current IR 10 Capacity between terminals CT 15 Trigger LED forward current IFT 4 Turn-OFF LED forward current IFC 0.2 Maximum resistance with output ON RON 0.8 1.2 Current leakage when the relay is open ILEAK 1.0 Capacity between terminals COFF 5 12 Capacity between I/O terminals CI-O 0.8 Insulation resistance between I/O terminals RI-O 1000 108 Turn-ON time tON 0.2 0.5 Turn-OFF time tOFF 0.2 0.5 1 Unit V μA pF mA mA Ω nA pF pF MΩ ms ms Measurement conditions IF = 10 mA Note: 2. Turn-ON and Turn-OFF Times VR = 5 V IF 1 4 RL V = 0, f = 1 MHz VDD VOUT IO = 100 mA 2 3 IOFF = 10 μA IF = 5 mA, IO = 450 mA, t = 10 ms VOFF = 20 V, Ta = 50 °C V = 0, f = 100 MHz, t < 1 s IF f = 1 MHz, VS = 0 V VI-O = 500 VDC, ROH ≤ 60 % 90% VOUT 10% IF = 5 mA, RL = 200 Ω , t ON t OFF VDD = 10 V (See note 2.) G3VM-21LR1 MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) Operating LED forward current Continuous load current (AC peak/DC) Ambient operating temperature VDD IF IO Ta 10 -20 - 20 30 450 60 V mA mA °C ■ Engineering Data LED forward current vs. Ambient temperature Continuous load current vs. Ambient temperature 80 60 40 IF - VF 600 LED forward current IF (mA) 100 500 400 300 200 100 Ta = 25 °C 50 30 10 5 3 1 0.5 20 100 0 -20 0 20 40 60 80 100 0.3 0 120 -20 0 20 40 Ambient temperature Ta (°C) Continuous load current vs. On-state voltage 80 100 0.1 120 0.6 0.8 1 On-state resistance vs. Ambient temperature 300 200 100 0 -100 1.6 1.8 IFT - Ta 3 IO = 450 mA IF = 5 mA t