G3VM-21PR11(TR05)

Introduction General-purpose G3VM-21PR@ MOS FET Relays USOP, Low-output-capacitance and Low-ON-resistance Type (with Low C × R) High-load-voltage USOP Package with Low Output Capacitance and ON Resistance • Load voltage: 20 V • G3VM-21PR10: Low C × R = 2.4 pF·Ω, COFF (standard) = 0.8 pF, Low C × R = 3 pF·Ω, COFF (standard) = 5 pF, RON (standard) = 0.6 Ω Note: The actual product is marked differently from the image shown here. • G3VM-21PR11: Low C × R = 7.2 pF·Ω, COFF (standard) = 40 pF, RON (standard) = 0.18 Ω RoHS Compliant ■Application Examples • Semiconductor test equipment • Communication equipment • Test & measurement equipment • Data loggers (Unit : mm, Average) ■Model Number Legend G3V M- @ @ @ @ @ USOP 4-pin 103 1.65 1. Load Voltage 2: 20 V 2. Contact form 1: 1a (SPST-NO) 4. Additional functions R: Low On-resistance 5. Other informations When specifications overlap, serial code is added in the recorded order. Note: The actual product is marked differently from the image shown here. 3. Package P: USOP 4 pin Low-output-capacitance and Low-ON-resistance 3.25 Current-limiting 1 2 3 4 5 2PA 2.2 High-dielectricstrength ■Package Tape cut packaging Terminals Load voltage (peak value) * Continuous load current (peak value) * 1a (SPST-NO) Surface-mounting Terminals 200 mA G3VM-21PR10 USOP4 20 V 450 mA G3VM-21PR1 900 mA G3VM-21PR11 Model Tape packaging Minimum package quantity Model 1 pc. G3VM-21PR1(TR05) Minimum package quantity G3VM-21PR10(TR05) 500 pcs. G3VM-21PR11(TR05) Note: To order tape packaging for Relays with surface-mounting terminals, add "(TR05)" to the end of the model number. Tape-cut USOPs are packaged without humidity resistance. Use manual soldering to mount them. Refer to common precautions. * The AC peak and DC value are given for the load voltage and continuous load current. Certified Models with Standards Certification Contact form Small and Highload-voltage ■Ordering Information Package Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength RON (standard) = 3 Ω • G3VM-21PR1: DIP SOP SSOP USOP VSON G3VM-21PR@ 157 MOS FET Relays Item Symbol LED forward current reduction rate G3VM-21PR10 G3VM-21PR1 G3VM-21PR11 Unit IF 50 mA ΔIF/°C −0.5 mA/°C LED reverse voltage VR 5 V Connection temperature TJ 125 °C Load voltage (AC peak/DC) VOFF Continuous load current (AC peak/DC) Multi-contact-pair High-current and Small and High(2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength Output High-load-voltage Input LED forward current 20 200 450 900 mA ΔIO/°C −2.0 −4.5 −12 mA/°C Pulse ON current lop 600 1,300 2,700 mA Connection temperature TJ ON current reduction rate 125 °C VI-O 500 Vrms Ta −40 to +85 °C Tstg −40 to +125 °C − 260 °C Soldering temperature G3VM-21PR10/21PR1 : Ta ≥ 25°C G3VM-21PR11 : Ta ≥ 50°C t=100 ms, Duty=1/10 Ambient operating temperature Ambient storage temperature Measurement conditions Ta≥25°C V IO Dielectric strength between I/O (See note 1.) AC for 1 min With no icing or condensation 10 s Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. ■Electrical Characteristics (Ta = 25°C) Item High-dielectricstrength Input General-purpose ■Absolute Maximum Ratings (Ta = 25°C) Current-limiting Output Introduction G3VM-21PR@ Symbol G3VM-21PR10 G3VM-21PR1 Minimum 1.0 LED forward voltage VF Typical 1.15 Maximum 1.3 Reverse current IR Maximum Capacitance between terminals CT Typical Trigger LED forward current IFT Release LED forward current IFC Maximum resistance with output ON RON Current leakage when the relay is open ILEAK Low-output-capacitance and Low-ON-resistance Capacitance between terminals COFF Capacitance between I/O terminals CI-O Insulation resistance between I/O terminals RI-O Small and Highload-voltage Turn-ON time tON Turn-OFF time tOFF Equivalent rise time ERT Typical Certified Models with Standards Certification 1 4 2 3 RL 10 μA VR=5 V 15 pF V=0, f=1 MHz 0.6 3 Minimum 0.1 Typical 3 0.6 0.18 Maximum 5 1.2 0.22 Typical 0.8 5 40 Maximum 1.1 12 − Maximum 1 0.4 Minimum 1000 Typical 108 Typical 0.04 0.2 0.2 0.5 2 Typical 0.13 0.2 0.1 Maximum 0.2 0.5 1 Typical − 40 − Maximum − 90 − IOFF=10 μA Ω IF=5 mA, t