G3VM-351D(TR)

G3VM-351A/D MOS FET Relays General-purpose Series with 350-V Load Voltage. • Upgraded G3VM-2 Series. • Continuous load current of 120 mA. • Operating time of 0.3 ms (typical). RoHS compliant Note: The actual product is marked differently from the image shown here. ■ Application Examples ■ Terminal Arrangement/Internal Connections • Test & Measurement equipment 4 • Security equipment 3 Mold pin mark * OMRON logo • Amusement equipment Model name Pin 1 mark 1 932 LOT.NO. 2 Note: The actual product is marked differently from the image shown here. * The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold. ■ List of Models Package type Contact form DIP4 1a (SPST-NO) Load voltage (peak value) * Terminals PCB Terminals 350 V Surface-mounting Terminals Model G3VM-351A G3VM-351D G3VM-351D (TR) Minimum package quantity Number per tube Number per tape and reel 100 - - 1,500 * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25°C) Output Input Item LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Pulse ON current Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF IFP ΔIF/°C VR TJ VOFF IO ΔIO/°C Iop TJ VI-O Ta Tstg - Rating 50 1 −0.5 5 125 350 120 −1.2 0.36 125 2500 −40 to +85 −55 to +125 260 Unit mA A mA/°C V °C V mA mA/°C A °C Vrms °C °C °C Measurement conditions 100 μs pulses, 100 pps Ta ≥ 25°C Ta ≥ 25°C t = 100 ms, Duty = 1/10 AC for 1 min With no icing or condensation With no icing or condensation 10 s Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. ■ Electrical Characteristics (Ta = 25°C) Output Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.0 1.15 1.3 Reverse current IR 10 Capacity between terminals CT 30 Trigger LED forward current IFT 1 3 Turn-OFF LED forward current IFC 0.1 25 35 Maximum resistance RON with output ON 35 50 Current leakage when the relay is open ILEAK 1.0 Capacity between terminals COFF 30 Capacity between I/O terminals CI-O 0.8 Insulation resistance between I/O terminals RI-O 1000 108 Turn-ON time tON 0.3 1.0 Turn-OFF time tOFF 0.1 1.0 1 Unit V μA pF mA mA Ω Ω μA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V Note: 2. Turn-ON and Turn-OFF Times V = 0, f = 1 MHz IF 1 4 RL IO = 120 mA VDD IOFF = 100 μA VOUT 2 3 IF = 5 mA, IO = 120 mA, t