G3VM-353H(TR)

G3VM-353H MOS FET Relays Analog-switching MOS FET Relays with SPST-NC Contact. • Models in 350-V load voltage series with SPST-NC contacts and SOP 6-pin package. RoHS compliant Note: The actual product is marked differently from the image shown here. ■ Application Examples ■ Terminal Arrangement/Internal Connections 6 • Semiconductor test equipment 5 4 • Test & Measurement equipment OMRON logo • Communication equipment Model name 932 Pin 1 mark LOT.No. • Data loggers 1 3 2 Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form SOP6 1b (SPST-NC) Load voltage (peak value) * Terminals Surface-mounting Terminals 350 V Model Minimum package quantity Number per tube Number per tape and reel G3VM-353H G3VM-353H (TR) 75 - - 2,500 * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25°C) Output Input Item LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Connection A Continuous Connection B load current Connection C Connection A ON current reduction Connection B rate Connection C Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF IFP ∆IF/°C VR TJ VOFF Unit mA A mA/°C V °C V TJ Rating 50 1 −0.5 5 125 350 120 120 240 −1.2 −1.2 −2.4 125 VI-O 1500 Vrms Ta Tstg - −40 to +85 −55 to +125 260 °C °C °C IO ∆IO/°C mA mA/°C Measurement conditions 100 µs pulses, 100 pps Ta ≥ 25°C Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Connection Diagram Connection A Connection A: AC peak/DC Connection B and C: DC Ta ≥ 25°C Connection B °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Connection C 1 6 2 5 3 4 1 6 2 5 3 4 1 6 2 5 3 4 Load or AC DC Load DC Load DC Output Input ■ Electrical Characteristics (Ta = 25°C) Item Symbol Minimum Typical Maximum LED forward voltage VF 1.0 1.15 1.3 Reverse current IR 10 Capacity between terminals CT 30 Trigger LED forward current IFC 1.0 3.0 Connection A 15 25 Maximum Connection B RON 8 14 resistance with output ON Connection C 4 Current leakage when the relay is open ILEAK 1.0 Unit V µA pF mA Ω Ω Ω µA Capacity between terminals COFF - 65 - pF Capacity between I/O terminals Insulation resistance between I/O terminals Turn-ON time Turn-OFF time CI-O RI-O tON tOFF 1000 - 0.8 - 1.0 3.0 pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz IOFF = 10 µA Note: 2. Turn-ON and Turn-OFF Times IO = 120 mA IO = 120 mA IO = 240 mA VOFF = 350 V, IF = 5 mA V = 0, f = 1 MHz, IF = 5 mA f = 1 MHz, Vs = 0 V VI-O = 500 VDC, ROH ≤ 60 % IF = 5 mA, RL = 200 Ω, VDD = 20 V (See note 2.) 1 G3VM-353H MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) Operating LED forward current Continuous load current (AC peak/DC) Ambient operating temperature VDD IF IO Ta 5 −20 - 280 25 120 65 V mA mA °C ■ Engineering Data LED forward current vs. Ambient temperature Continuous load current vs. Ambient temperature IO - Ta 100 80 60 40 IF - VF 280 LED forward current IF (mA) Continuous load current IO (mA) LED forward current IF (mA) IF - Ta LED forward current vs. LED forward voltage 240 200 160 120 100 Ta = 25°C 50 30 10 5 3 1 80 0.5 20 0.3 40 0.1 0 0 -20 0 20 40 60 80 100 20 120 0 20 40 Ambient temperature Ta (°C) Continuous load current vs. On-state voltage 100 120 0.6 100 0 1 IO = 120 mA t