G3VM-353H

MOS FET Relays Analog-switching MOS FET Relay with SPST-NC (Single-pole, Single-throw, Normally Closed) Contacts • New models in 350-V load voltage series with SPST-NC contacts and a 6-pin SOP package. • Continuous load current of 120 mA. • Dielectric strength of 1,500 Vrms between I/O. G3VM-353H ■ Application Examples • Broadband systems • Measurement devices • Data loggers • Amusement machines Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NC Terminals Surface-mounting terminals Load voltage (peak value) 350 VAC Model G3VM-353H G3VM-353H(TR) Number per stick 75 --Number per tape --2,500 ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-353H 4.4±0.25 6.3±0.25 2.1 max. 0.15 Note: The actual product is marked differently from the image shown here. 2.54±0.25 0.1±0.1 0.4±0.1 0.6±0.3 7.0±0.4 Weight: 0.13 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-353H 6 5 4 1 2 3 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-353H 6 to 6.3 1.2 0.8 2.54 2.54 80 G3VM-353H ■ Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Output Output dielectric strength Continuous load current Connection A Connection B Connection C ON current reduction rate Connection A Connection B Connection C Connection temperature Dielectric strength between input and output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) Tj VI-O Ta Tstg --D ION/°C Symbol IF IFP D IF/°C VR Tj VOFF IO Rating 50 1 -0.5 5 125 350 120 120 240 -1.2 -1.2 -2.4 125 1,500 -40 to +85 -55 to +125 260 °C Vrms °C °C °C AC for 1 min With no icing or condensation With no icing or condensation 10 s 1 1 G3VM-353H Unit mA A mA/°C V °C V mA Measurement Conditions Note: 100 ms pulses, 100 pps Ta ³ 25°C 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Connection Diagram 1 6 5 4 Load AC or DC Connection A 2 3 6 5 4 Load DC mA/°C Ta ³ 25°C Connection B 2 3 6 5 4 Load DC Connection C 2 3 ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Connection A Connection B Connection C Current leakage when the relay is open Capacity between I/O terminals Insulation resistance Turn-ON time Turn-OFF time ILEAK CI-O RI-O tON tOFF Symbol VF IR CT IFT RON Minimum 1.0 ----------------1,000 ----Typical 1.15 --30 1.0 15 8 4 --0.8 ------Maximum 1.3 10 --3.0 25 14 --1.0 ----1.0 3.0 V mA pF mA W W W mA pF MW ms ms Unit Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz IOFF = 10 mA IO = 120 mA IO = 120 mA IO = 240 mA VOFF = 350 V, IF = 5 mA f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH £ 60% IF = 5 mA, RL = 200 W, VDD = 20 V (See note 2.) VOUT IF Note: 2. Turn-ON and Turn-OFF Times IF 1 2 6 4 RL VDD VOUT 10% t ON 90% t OFF ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Output dielectric strength Operating LED forward current Continuous load current Operating temperature Symbol VDD IF IO Ta --5 --- 20 Minimum --------Typical Maximum 280 25 120 65 V mA mA °C Unit ■ Engineering Data Load Current vs. Ambient Temperature G3VM-353H Load current (mA) 300 ■ Safety Precautions Refer to page 6 for precautions common to all G3VM models. 250 Connection C 200 150 Connection A or connection B 100 50 0 −20 0 20 40 60 80 100 Ambient temperature (°C) 81