G3VM-353HTR

MOS FET Relays G3VM-353H/H1 Analog-switching MOS FET Relay with SPST-NC (Single-pole, Single-throw, Normally Closed) Contacts. General-purpose Series Added. • New models in 350 load voltage with SPST-NC contacts and a 6-pin SOP package. General-purpose (high On-Resistance) series added. • Continuous load current of 120 mA. • Dielectric strength of 1,500 Vrms between I/O. • RoHS Compliant. ■ Application Examples • Broadband systems • Measurement devices and Data loggers • Amusement machines Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NC Terminals Surface-mounting terminals Load voltage (peak value) 350 VAC Model G3VM-353H G3VM-353H1 G3VM-353H(TR) G3VM-353H1(TR) --2,500 Number per stick 75 Number per tape --- ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-353H/H1 4.4±0.25 6.3±0.25 2.1 max. 0.15 Note: The actual product is marked differently from the image shown here. 2.54±0.25 0.1±0.1 0.4±0.1 0.6±0.3 7.0±0.4 Weight: 0.13 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-353H/H1 6 5 4 1 2 3 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-353H/H1 6 to 6.3 1.2 0.8 2.54 2.54 MOS FET Relays G3VM-353H/H1 197 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Output Load voltage (AC peak/DC) Continuous load current Symbol IF IFP Δ IF/°C VR Tj VOFF Rating 50 1 −0.5 5 125 350 120 (90) 120 (90) 240 (180) mA/°C Ta ≥ 25°C Connection B Unit mA A mA/°C V °C V mA Measurement conditions Note: 100 μs pulses, 100 pps Ta ≥ 25°C 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Connection Diagram 1 6 5 4 Load AC or DC Connection A 2 3 Connection A IO Connection B Connection C 1 2 3 6 5 4 Load DC ON current Connection A Δ ION/°C −1.2 (-0.9) reduction rate Connection B −1.2 (-0.9) Connection C Connection temperature Tj −2.4 (-1.8) 125 1,500 −40 to +85 1 6 5 4 Load DC °C Vrms °C °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Dielectric strength between input and VI-O output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) Ta Tstg --- Connection C 2 3 −55 to +125 °C 260 Values inside parentheses ( ) are for G3VM-353H1 ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Connection A Connection B Connection C Current leakage when the relay is open ILEAK Capacity between terminals A Connection Capacity between I/O terminals Insulation resistance Turn-ON time Turn-OFF time COFF CI-O RI-O tON tOFF Symbol VF IR CT IFT RON Minimum 1.0 ------------------1,000 ----Typical 1.15 --30 1.0 15 (27) 8 (20) 4 (10) 0.0105 (0.003) 65 (30) 0.8 --Maximum 1.3 10 --3.0 25 (50) 14 (43) --1.0 ------Unit V μA pF mA Ω Ω Ω μA pF pF MΩ Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz IOFF = 10 μA IO = 120 mA IO = 120 mA IO = 240 mA VOFF = 350 V, IF = 5 mA V = 0, f = 1(100) MHz, IF = 5 mA f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH ≤ 60% IF = 5 mA, RL = 200 Ω, VDD = 20 V (See note 2.) VOUT IF Note: 2. Turn-ON and Turn-OFF Times IF 1 2 6 4 RL VDD VOUT 10% t ON 90% t OFF 0.15 (0.25) 1.0 (0.5) ms 0.7 (0.5) 3.0 (1) ms Values inside parentheses ( ) are for G3VM-353H1 ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Load voltage (AC peak/DC) Operating LED forward current Symbol VDD IF Minimum --5 --− 20 --------Typical Maximum 280 25 120 (90) 65 V mA mA °C Unit Continuous load current (AC peak/DC) IO Operating temperature Ta Values inside parentheses ( ) are for G3VM-353H1 198 MOS FET Relays G3VM-353H/H1 ■ Engineering Data G3VM-353H LED forward current vs. Ambient temperature IF - Ta LED forward current IF (mA) Continuous load current I O (mA) 100 280 240 Continuous load current vs. Ambient temperature IO - Ta LED forward current I F (mA) LED forward current vs. LED forward voltage IF - VF 100 Ta = 25°C 50 30 80 200 160 10 5 3 60 40 120 1 0.5 0.3 80 20 40 0 −20 0 20 40 60 80 100 120 0 −20 0 20 40 60 80 100 120 0.1 0.6 0.8 1 1.2 1.4 1.6 1.8 Ambient temperature Ta ( ) Ambient temperature Ta LED forward voltage VF (V) Continuous load current vs. On-state voltage IO - VON Continuous load current IO (mA) On-state resistance RON (Ω) 200 Ta Ta = 25 C A Connection On-state resistance vs. Ambient temperature RON - Ta IO = 120 mA t < 1s A Connection Trigger LED forward current vs. Ambient temperature IFC - Ta Trigger LED forward current I F C (mA) 5 IOFF = 10 μ A 20 100 15 4 3 0 10 2 −100 5 1 −200 −2 −1 0 1 2 0 −20 0 20 40 60 80 100 0 −40 −20 0 20 40 60 80 100 On-state voltage VON (V) Ambient temperature Ta ( ) Ambient temperature Ta ( ) Turn ON, Turn OFF time vs. LED forward current tON, tOFF - IF Turn ON, Turn OFF time tON, tOFF (μS) Ta = 25°C VDD = 20 V, RL = 200 Ω tOFF 500 300 tON Turn ON, Turn OFF time vs. Ambient temperature tON, tOFF - Ta Turn ON, Turn OFF time tON, tOFF (μS) VDD = 20 V, RL = 200 Ω 1000 IF = 5 mA tOFF Current leakage vs. Ambient temperature I LEAK - Ta Current leakage ILEAK (nA) 1000 VOFF = 350 V IF = 5 mA 2000 1200 1000 800 100 600 100 400 10 50 30 1 3 5 10 30 50 100 200 tON 0 −40 −20 0 20 40 60 80 100 1 0 20 40 60 80 100 LED forward current IF (mA) Ambient temperature Ta ( Ambient temperature Ta ( ) MOS FET Relays G3VM-353H/H1 199 ■ Engineering Data G3VM-353H1 LED forward current vs. Ambient temperature IF - Ta LED forward current IF (mA) Continuous load current I O (mA) 100 Continuous load current vs. Ambient temperature IO - Ta LED forward current I F (mA) 280 240 200 160 120 LED forward current vs. LED forward voltage IF - VF 100 Ta = 25°C 80 30 C Connection 10 60 3 40 A,B Connection , 80 40 0 −20 1 20 0.3 0 −20 0 20 40 60 80 100 120 0 20 40 60 80 100 120 0.1 0.6 0.8 1 1.2 1.4 1.6 1.8 Ambient temperature Ta ( ) Ambient temperature Ta LED forward voltage VF (V) Continuous load current vs. On-state voltage IO - VON Continuous load current IO (mA) On-state resistance RON (Ω) 150 Ta = 25°C 100 On-state resistance vs. Ambient temperature RON - Ta Trigger LED forward current I F C (mA) 50 IO = 90 mA t