G3VM-354F1

MOS FET Relays G3VM-354C/C1/F/F1 Analog-switching MOS FET Relay with DPST-NC Contacts. General-purpose models added. • Switches minute analog signals. • Switching AC and DC. • General-purpose models (high ON resistance) added. • RoHS Compliant. ■ Application Examples • Electronic automatic exchange systems • Security systems • Datacom (modem) systems • FA systems and Measurement devices Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form DPST-NC Terminals PCB terminals Load voltage (peak value) 350 VAC Model G3VM-354C G3VM-354C1 Surface-mounting terminals G3VM-354F G3VM-354F1 G3VM-354F(TR) G3VM-354F1(TR) --1,500 Number per stick 50 Number per tape --- ■ Dimensions Note: All units are in millimeters unless otherwise indicated. 9.66±0.25 G3VM-354C/C1 6.4±0.25 7.62±0.25 3.65 −0.25 0.25 2.5 min. 1.2±0.15 0.5±0.1 2.54±0.25 +0.1 −0.05 +0.15 G3VM-354F/F1 9.66±0.25 6.4±0.25 7.62±0.25 4.0 +0.25 −0.2 0.8±0.25 3.65 −0.25 +0.15 Note: The actual product is marked differently from the image shown here. 7.85 to 8.80 Weight: 0.54 g Note: The actual product is marked differently from the image shown here. 1.0 min. 10.0 max. 2.54±0.25 1.2±0.15 1.0 min. Weight: 0.54 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-354C/C1 8 7 6 5 G3VM-354F/F1 8 7 6 5 1 2 3 4 1 2 3 4 ■ PCB Dimensions (Bottom View) G3VM-354C/C1 2.54 2.54 Eight 0.8-dia. holes (0.56) ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-354F/F1 8.3 to 8.8 2.54 2.54 (0.1) (0.56) (0.1) 1.3 1.5 MOS FET Relays G3VM-354C/C1/F/F1 55 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Output Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Connection temperature Dielectric strength between input and output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) Symbol IF IFP Δ IF/°C VR Tj VOFF IO Rating 50 1 −0.5 5 125 350 150 (100) Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Ta ≥ 25°C 100 μs pulses, 100 pps Ta ≥ 25°C Measurement conditions Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Δ ION/°C −1.5 (−1) Tj VI-O Ta Tstg --125 2,500 −40 to +85 −55 to +125 °C 260 Values in parentheses are for the G3VM-354C1/F1 ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Symbol VF IR CT IFT RON Minimum 1.0 --------------1,000 ----Typical 1.15 --30 1 15 (30) 0.0105 (0.003) 85 (30) 0.8 --Maximum 1.3 10 --3 25 (50) 1.0 ------Unit V μA pF mA Ω μA pF pF MΩ ms Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz IOFF = 10 μA IO = 150 mA IF = 5 mA, VOFF = 350 V V = 0, f = 1MHz, IF = 5 mA f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH ≤ 60% IF = 5 mA, RL = 200 Ω, VDD = 20 V (See note 2.) VOUT IF Note: IF 2. Turn-ON and Turn-OFF Times 1 2 4 3 RL VDD VOUT Current leakage when the relay is open ILEAK Capacity between terminals Capacity between I/O terminals Insulation resistance Turn-ON time Turn-OFF time COFF CI-O RI-O tON tOFF 10% t ON 90% t OFF 0.1 (0.25) 1.0 (0.5) 1.0 (0.5) 3.0(0.1) ms Values in parentheses are for the G3VM-354C1/F1 ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Load voltage (AC peak/DC) Operating LED forward current Symbol VDD IF Minimum --5 --− 20 --------Typical Maximum 280 25 150 (100) 65 V mA mA °C Unit Continuous load current (AC peak/DC) IO Operating temperature Ta Values in parentheses are for the G3VM-354C1/F1 56 MOS FET Relays G3VM-354C/C1/F/F1 ■ Engineering Data G3VM-354C/F LED forward current vs. Ambient temperature IF - Ta LED forward current IF (mA) Continuous load current I O (mA) 100 Continuous load current vs. Ambient temperature IO - Ta LED forward current I F (mA) 300 LED forward current vs. LED forward voltage IF - VF 100 50 30 Ta = 25°C 80 250 200 10 5 3 60 150 40 100 1 0.5 0.3 20 50 0 −20 0 20 40 60 80 100 120 0 −20 0 20 40 60 80 100 120 0.1 0.6 0.8 1 1.2 1.4 1.6 1.8 Ambient temperature Ta ( ) Ambient temperature Ta LED forward voltage VF (V) Continuous load current vs. On-state voltage IO - VON Continuous load current IO (mA) On-state resistance RON (Ω) 200 Ta = 25°C On-state resistance vs. Ambient temperature RON - Ta 20 Trigger LED forward current vs. Ambient temperature IFC - Ta 5 Trigger LED forward current I F C (mA) IO = 150 mA t < 1s 15 IOFF = 10 μA 4 100 3 0 10 2 −100 5 1 −200 −2 −1 0 1 2 0 −20 0 20 40 60 80 100 0 −40 −20 0 20 40 60 80 100 On-state voltage VON (V) Ambient temperature Ta ( ) Ambient temperature Ta ( ) Turn ON, Turn OFF time vs. LED forward current tON, tOFF - IF Turn ON, Turn OFF time tON, tOFF (μS) Turn ON, Turn OFF time tON, tOFF (μS) 2000 Ta = 25°C VDD = 20 V, RL = 200 Ω tOFF 500 300 tON Turn ON, Turn OFF time vs. Ambient temperature tON, tOFF - Ta Current leakage ILEAK (nA) 1200 VDD = 20 V, RL = 200 Ω IF = 5 mA tOFF Current leakage vs. Ambient temperature I LEAK - Ta 1000 VOFF = 350 V IF = 5 mA 1000 1000 800 100 600 400 10 100 200 tON 50 30 1 3 5 10 30 50 100 0 −40 −20 0 20 40 60 80 100 1 0 20 40 60 80 100 LED forward current IF (mA) Ambient temperature Ta ( Ambient temperature Ta ( ) MOS FET Relays G3VM-354C/C1/F/F1 57 ■ Engineering Data G3VM-354C1/F1 LED forward current vs. Ambient temperature IF - Ta LED forward current IF (mA) Continuous load current I O (mA) 100 Continuous load current vs. Ambient temperature IO - Ta LED forward current I F (mA) 160 LED forward current vs. LED forward voltage IF - VF 100 Ta = 25°C 80 30 120 10 60 80 3 40 1 40 20 0.3 0 −20 0 20 40 60 80 100 120 0 −20 0 20 40 60 80 100 120 0.1 0.6 0.8 1 1.2 1.4 1.6 1.8 Ambient temperature Ta ( ) Ambient temperature Ta LED forward voltage VF (V) Continuous load current vs. On-state voltage IO - VON Continuous load current IO (mA) On-state resistance RON (Ω) 150 Ta = 25°C 100 On-state resistance vs. Ambient temperature RON - Ta I O = 100 mA t