G3VM-354J

G3VM-354J MOS FET Relays Analog-switching MOS FET Relays with DPST-NC Contact. • Models with DPST-NC contacts and SOP 8-pin package now included in 350-V load voltage series. RoHS compliant Note: The actual product is marked differently from the image shown here. ■ Application Examples ■ Terminal Arrangement/Internal Connections • Semiconductor test equipment 8 7 6 5 • Test & Measurement equipment OMRON logo • Communication equipment Pin 1 mark • Data loggers 1 2 Model name LOT.No. 932 4 3 Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form SOP8 2b (DPST-NC) Load voltage (peak value) * Terminals Surface-mounting Terminals 350 V Model G3VM-354J G3VM-354J (TR) Minimum package quantity Number per tube Number per tape and reel 50 - - 2,500 * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25°C) Output Input Item LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF IFP ∆IF/°C VR TJ VOFF IO ∆IO/°C TJ Rating 50 1 −0.5 5 125 350 120 −1.2 125 Unit mA A mA/°C V °C V mA mA/°C °C VI-O 1500 Vrms Ta Tstg - −40 to +85 −55 to +125 260 °C °C °C Measurement conditions 100 µs pulses, 100 pps Ta ≥ 25°C Ta ≥ 25°C AC for 1 min With no icing or condensation With no icing or condensation 10 s Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. ■ Electrical Characteristics (Ta = 25°C) Output Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.0 1.15 1.3 Reverse current IR 10 Capacity between terminals CT 30 Trigger LED forward current IFC 1 3 Maximum resistance with output ON RON 15 25 Current leakage when the relay is open ILEAK 1.0 Capacity between terminals COFF 65 Capacity between I/O terminals CI-O 0.8 Insulation resistance between I/O terminals RI-O 1000 Turn-ON time tON 1.0 Turn-OFF time tOFF 3.0 1 Unit V µA pF mA Ω µA pF pF MΩ ms ms Measurement conditions Note: 2. Turn-ON and Turn-OFF Times IF = 10 mA IF 1 (3) VR = 5 V 8 (6) RL VDD V = 0, f = 1 MHz VOUT 2 (4) 7 (5) IOFF = 10 µA IO = 120 mA VOFF = 350 V, IF = 5 mA V = 0, f = 1 MHz, IF = 5 mA IF f = 1 MHz, VS = 0 V VI-O = 500 VDC, ROH ≤ 60 % 90% VOUT 10% IF = 5 mA, RL = 200 Ω , t ON t OFF VDD = 20 V (See note 2.) G3VM-354J MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Load voltage (AC peak/DC) VDD - - 280 Unit V Operating LED forward current IF 5 - 25 mA Continuous load current (AC peak/DC) IO - - 120 mA Ambient operating temperature Ta −20 - 65 °C ■ Engineering Data LED forward current vs. Ambient temperature Continuous load current vs. Ambient temperature IO - Ta 80 60 40 IF - VF 100 LED forward current IF (mA) 100 Continuous load current IO (mA) LED forward current IF (mA) IF - Ta LED forward current vs. LED forward voltage 280 240 200 160 120 Ta = 25°C 50 30 10 5 3 1 80 0.5 20 0.3 40 0 -20 0 20 40 60 80 100 0 120 0.1 -20 0 20 40 Ambient temperature Ta (°C) Continuous load current vs. On-state voltage 100 120 On-state resistance vs. Ambient temperature 100 0 IO = 120 mA t