G3VM-355JR

G3VM-355JR MOS FET Relays SPST-NO + SPST-NC MOS FET Relay in a Single SOP Package. • SPST-NO/SPST-NC models with SOP 8-pin package now available in the 350-V load voltage series. RoHS compliant Note: The actual product is marked differently from the image shown here. ■ Application Examples ■ Terminal Arrangement/Internal Connections • Broadband systems (1b) 8 (1a) 7 6 5 • Test & Measurement equipment OMRON logo • Data loggers Pin 1 mark • Amusement machines 1 2 Model name LOT.No. 932 4 3 Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form SOP8 1a1b (SPST-NO/ SPST-NC) Load voltage (peak value) * Terminals Minimum package quantity Number per tube Number per tape and reel Model G3VM-355JR Surface-mounting Terminals 50 - - 2,500 350 V G3VM-355JR (TR) * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25°C) Output Input Item LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF IFP ∆IF/°C VR TJ VOFF IO ∆IO/°C TJ VI-O Ta Tstg - Rating 50 1 −0.5 5 125 350 120 −1.2 125 1500 −40 to +85 −55 to +125 260 Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C °C °C Measurement conditions 100 µs pulses, 100 pps Ta ≥ 25°C Ta ≥ 25°C AC for 1 min With no icing or condensation With no icing or condensation 10 s Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Output Input ■ Electrical Characteristics (Ta = 25°C) Item Symbol Minimum Typical Maximum LED forward voltage 1.0 1.15 1.3 VF Reverse current 10 IR Capacity between terminals CT 30 IFT Trigger LED forward 1 3 current IFC Maximum resistance 15 25 RON with output ON Ω 1.0 µA - 65 - pF 1000 - 0.8 - 1.0 1.0 1.0 3.0 pF MΩ ms ms ms ms ILEAK - Capacity between terminals COFF Capacity between I/O terminals Insulation resistance between I/O terminals 1a Turn-ON time 1b 1a Turn-OFF time 1b CI-O RI-O tOFF mA - Current leakage when the relay is open tON Unit V µA pF Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz 1a : IO = 120 mA Note: 2. Turn-ON and Turn-OFF Times 1b : IOFF = 10 µA 1b 1a IF 3 1a : IF = 5 mA, IO = 120 mA IF 1 8 RL VDD 1b : IF = 0 mA, IO = 120 mA VOUT 2 7 4 VOFF = 350 V (1a) V = 0, f = 1 MHz (1b) V = 0, f = 1 MHz, IF = 5mA f = 1 MHz, VS = 0 V IF IF VI-O = 500 VDC, ROH ≤ 60 % IF = 5 mA, RL = 200 Ω , VDD = 20 V (See note 2.) VOUT 10% t ON 90% t OFF VOUT 6 5 10% t ON RL VDD VOUT 90% t OFF 1 G3VM-355JR MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Load voltage (AC peak/DC) VDD - - 280 Unit V Operating LED forward current IF 5 - 25 mA Continuous load current (AC peak/DC) IO - - 120 mA Ambient operating temperature Ta −20 - 65 °C ■ Engineering Data (Common to SPST-NO and SPST-NC contacts) LED forward current vs. Ambient temperature Continuous load current vs. Ambient temperature IO - Ta 80 60 40 IF - VF 280 LED forward current IF (mA) 100 Continuous load current IO (mA) LED forward current IF (mA) IF - Ta LED forward current vs. LED forward voltage 240 200 160 120 100 Ta = 25°C 50 30 10 5 3 1 80 0.5 20 0.3 40 0 0 -20 0 20 40 60 80 100 120 -20 0 20 Ambient temperature Ta (°C) 40 60 80 100 0.1 120 0.6 0.8 1 1.2 Ambient temperature Ta (°C) 1.4 1.6 1.8 LED forward voltage VF (V) (SPST-NO contacts) Continuous load current vs. On-state voltage On-state resistance vs. Ambient temperature RON - Ta (1N.O.) Ta = 25°C IF = 5 mA 100 0 -100 IO = 120 mA t