G3VM-3L

MOS FET Relays G3VM-3(F)L Analog-switching MOS FET Relay with 350-V Load Voltage and Current Limit. • Approved standards: UL1577 (File No. E80555) ■ Application Examples • Electronic automatic exchange systems • Multi-functional telephones • Cordless telephones • Measuring devices Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NO Terminals Load voltage (peak value) PCB terminals 350 VAC Model G3VM-3L Surface-mounting terminals Current limit Yes Number per stick Number per tape 50 --- --- 1,500 G3VM-3FL G3VM-3FL(TR) ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-3L G3VM-3FL 7.12±0.25 7.12±0.25 6.4±0.25 6.4±0.25 7.62±0.25 7.62±0.25 0.8±0.25 +0.15 3.65 −0.25 1.0 min. +0.1 0.25 −0.05 Note: The actual product is marked differently from the image shown here. 1.2±0.15 2.5 min. 7.85 to 8.80 0.5±0.1 2.54±0.25 Weight: 0.4 g Note: The actual product is marked differently from the image shown here. 1.0 min. 2.54±0.25 1.2±0.15 10.0 max. Weight: 0.4 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-3L 6 5 4 1 2 3 ■ PCB Dimensions (Bottom View) G3VM-3L 2.54 Six 0.8-dia. holes (0.56) G3VM-3FL 6 5 4 1 2 3 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-3FL 2.54 2.54 2.54 8.3 to 8.8 (0.1) (0.56) (0.1) 1.3 1.5 24 G3VM-3(F)L G3VM-3(F)L ■ Absolute Maximum Ratings (Ta = 25°C) Item Input Symbol Rating Unit Measurement Conditions Note: LED forward current IF 50 mA Repetitive peak LED forward current IFP 1 A 100 ms pulses, 100 pps LED forward current reduction rate D IF/°C -0.5 mA/°C Ta ³ 25°C LED reverse voltage VR 5 V Connection temperature Tj 125 °C Output dielectric strength VOFF 350 V Continuous load current IO 120 mA ON current reduction rate D ION/°C -1.2 mA/°C Connection temperature Tj 125 °C Dielectric strength between input and output (See note 1.) VI-O 2,500 Vrms AC for 1 min Operating temperature Ta -40 to +85 °C With no icing or condensation Storage temperature Tstg -55 to +125 °C With no icing or condensation Soldering temperature (10 s) --- 260 Output 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Ta ³ 25°C °C 10 s ■ Electrical Characteristics (Ta = 25°C) Item Input Symbol Minimum Typical Maximum Unit Measurement conditions Note: LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA Reverse current IR --- --- 10 mA VR = 5 V Capacity between terminals CT --- 30 --- pF V = 0, f = 1 MHz Trigger LED forward current IFT --- --- 3 mA IO = 120 mA Maximum resistance with output ON RON --- 22 35 W IF = 5 mA, IO = 120 mA Current leakage when the relay is open ILEAK --- --- 1.0 mA VOFF = 350 V Limit current ILIM 150 --- 300 mA IF = 5 mA, VDD = 5 V, t = 5 ms Capacity between I/O terminals CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V Insulation resistance RI-O 1,000 --- --- MW VI-O = 500 VDC, RoH £ 60% IF = 5 mA, RL = 200 W, VDD = 20 V (See note 2.) Output Turn-ON time tON --- --- 1.0 ms Turn-OFF time tOFF --- --- 1.0 ms 2. Turn-ON and Turn-OFF Times IF 1 6 2 4 AC/DC 1 6 2 4 Load RL VDD VOUT IF VOUT 10% t ON 90% t OFF ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Output dielectric strength VDD --- Operating LED forward current IF 5 Continuous load current IO --- Operating temperature Ta - 20 --- --- Maximum Unit 280 V 7.5 25 mA --- 120 mA 65 °C ■ Engineering Data ■ Safety Precautions Load Current vs. Ambient Temperature Refer to page 6 for precautions common to all G3VM models. Load current (mA) G3VM-3(F)L 140 120 100 80 60 40 20 0 −20 0 20 40 60 80 100 Ambient temperature (°C) 25