G3VM-401ETR

MOS FET Relays G3VM-401B/E Analog-switching MOS FET Relays with Dielectric Strength of 2.5 kVAC between I/O Using Optical Isolation • Switches minute analog signals. • Leakage current of 1 μA max. (0.8 nA typ.) when relay is open. • Upgraded G3VM-4N Series. • RoHS Compliant. ■ Application Examples • Electronic automatic exchange systems • Measurement devices • FA systems Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NO Terminals PCB terminals Surface-mounting terminals Load voltage (peak value) 400 VAC Model G3VM-401B G3VM-401E G3VM-401E(TR) --1,500 Number per stick 50 Number per tape --- ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-401B 7.12±0.25 G3VM-401E 7.12±0.25 6.4±0.25 7.62±0.25 6.4±0.25 7.62±0.25 3.65 −0.25 0.25 +0.1 −0.05 0.8±0.25 3.65 −0.25 +0.15 +0.15 1.0 min. 1.2±0.15 2.54±0.25 10.0 max. 4.0 +0.25 −0.2 1.0 min. Note: The actual product is marked differently from the image shown here. 2.5 min. 1.2±0.15 0.5±0.1 2.54±0.25 7.85 to 8.80 Weight: 0.38 g Note: The actual product is marked differently from the image shown here. Weight: 0.38 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-401B 6 5 4 G3VM-401E 6 5 4 1 2 3 1 2 3 ■ PCB Dimensions (Bottom View) G3VM-401B 2.54 2.54 Six 0.8-dia. holes (0.61) ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-401E 8.3 to 8.8 2.54 2.54 (1.52) (0.61) (1.52) 1.3 1.5 MOS FET Relays G3VM-401B/E 69 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Output Load voltage (AC peak/DC) Continuous load current Connection A Connection B Connection C ON current Connection A reduction rate Connection B Connection C Connection temperature Dielectric strength between input and output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) Tj VI-O Ta Tstg --Symbol IF IFP Δ IF/°C VR Tj VOFF IO Rating 50 1 −0.5 5 125 400 120 120 240 Δ ION/°C −1.2 −1.2 −2.4 125 2,500 −40 to +85 °C Vrms °C °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Connection C 1 2 3 6 5 4 Load DC Unit mA A mA/°C V °C V mA Measurement conditions Note: 100 μs pulses, 100 pps Ta ≥ 25°C 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Connection Diagram 1 6 5 4 Load AC or DC Connection A 2 3 1 6 5 4 Load DC mA/°C Ta ≥ 25°C Connection B 2 3 −55 to +125 °C 260 ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Connection A Connection B Connection C Current leakage when the relay is open ILEAK Capacity between terminals A Connection Capacity between I/O terminals Insulation resistance Turn-ON time Turn-OFF time COFF CI-O RI-O tON tOFF Symbol VF IR CT IFT RON Minimum 1.0 ------------------1,000 ----Typical 1.15 --30 1 17 11 6 0.0008 40 0.8 --0.3 0.1 Maximum 1.3 10 --3 35 20 10 1.0 ------1.0 1.0 Unit V μA pF mA Ω Ω Ω μA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz IO = 120 mA IF = 5 mA, IO = 120 mA IF = 5 mA, IO = 120 mA IF = 5 mA, IO = 240 mA VOFF = 350 V V = 0, f = 1MHz f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH ≤ 60% IF = 5 mA, RL = 200 Ω, VDD = 20 V (See note 2.) IF Note: 2. Turn-ON and Turn-OFF Times IF 1 2 6 4 RL VDD VOUT VOUT 10% t ON 90% t OFF ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Load voltage (AC peak/DC) Operating LED forward current Continuous load current (AC peak/DC) Operating temperature Symbol VDD IF IO Ta Minimum --5 --− 20 --7.5 ----Typical Maximum 320 25 120 65 V mA mA °C Unit 70 MOS FET Relays G3VM-401B/E ■ Engineering Data LED forward current vs. Ambient temperature IF - Ta LED forward current IF (mA) Continuous load current I O (mA) 100 280 C Connection 240 200 160 A,B Connection 120 80 40 0 -20 Continuous load current vs. Ambient temperature IO - Ta LED forward current I F (mA) LED forward current vs. LED forward voltage IF - VF 100 Ta = 25°C 50 30 80 10 5 3 60 40 1 0.5 0.3 20 0 -20 0 20 40 60 80 100 120 0 20 40 60 80 100 120 0.1 0.6 0.8 1 1.2 1.4 1.6 1 .8 Ambient temperature Ta ( ) Ambient temperature Ta LED forward voltage VF (V) Continuous load current vs. On-state voltage IO - VON Continuous load current IO (mA) 200 Ta= 25 C, A Connection IF = 5 mA On-state resistance vs. Ambient temperature RON - Ta Trigger LED forward current I F T (mA) On-state resistance RON (Ω) 60 IO = 120 mA IF = 5 mA t