G3VM-401EY

G3VM-401BY/EY MOS FET Relays Analog-switching MOS FET Relays with a Dielectric Strength of 5 kVAC between I/O Using Optical Isolation. • Switches minute analog signals. • Leakage current of 1 µA max. when output relay is open. RoHS compliant Note: The actual product is marked differently from the image shown here. ■ Application Examples ■ Terminal Arrangement/Internal Connections • Communication equipment 6 5 4 • Test & Measurement equipment OMRON logo Model name • Industrial equipment 932 Pin 1 mark 1 LOT.NO. 3 2 Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form Load voltage (peak value) * Terminals PCB Terminals DIP6 1a (SPST-NO) Model Minimum package quantity Number per tube Number per tape and reel G3VM-401BY 400 V Surface-mounting Terminals G3VM-401EY G3VM-401EY (TR) 50 - - 1,500 * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25°C) Output Input Item LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Connection A Continuous Connection B load current Connection C Connection A ON current reduction Connection B rate Connection C Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF IFP ∆IF/°C VR TJ VOFF IO ∆IO/°C TJ VI-O Ta Tstg - Rating 50 1 −0.5 5 125 400 120 120 240 −1.2 −1.2 −2.4 125 5000 −40 to +85 −55 to +125 260 Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C °C °C Measurement conditions 100 µs pulses, 100 pps Ta ≥ 25°C Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Connection Diagram Connection A Connection A: AC peak/DC Connection B and C: DC Ta ≥ 25°C AC for 1 min With no icing or condensation With no icing or condensation 10 s Connection B Connection C 1 6 Load 2 5 3 4 or AC DC 1 6 2 5 3 4 1 6 2 5 3 4 ■ Electrical Characteristics (Ta = 25°C) Output Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.0 1.15 1.3 Reverse current IR 10 Capacity between terminals CT 30 Trigger LED forward current IFT 3 Connection A 17 35 Maximum resistance Connection B RON 11 20 with output ON Connection C 6 10 Current leakage when the relay is open ILEAK 1.0 Capacity between terminals COFF 40 Capacity between I/O terminals CI-O 0.8 Insulation resistance between I/O terminals RI-O 1000 Turn-ON time tON 0.3 1.0 Turn-OFF time tOFF 0.1 1.0 1 Unit V µA pF mA Ω Ω Ω µA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V Note: 2. Turn-ON and Turn-OFF Times V = 0, f = 1 MHz IF 1 6 RL IO = 120 mA VDD VOUT IF = 5 mA, IO = 120 mA 2 4 IF = 5 mA, IO = 120 mA IF = 5 mA, IO = 240 mA VOFF = 400 V V = 0, f = 1 MHz IF f = 1 MHz, VS = 0 V VI-O = 500 VDC, ROH ≤ 60% 90% VOUT 10% IF = 5 mA, RL = 200 Ω, t ON t OFF VDD = 20 V(See note 2.) Load DC Load DC G3VM-401BY/EY MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Load voltage (AC peak/DC) VDD - - 320 Unit V Operating LED forward current IF 5 7.5 25 mA Continuous load current (AC peak/DC) IO - - 120 mA Ambient operating temperature Ta −20 - 65 °C ■ Engineering Data Continuous load current vs. Ambient temperature 80 60 40 300 -20 0 20 40 60 80 100 Connection C 250 200 150 20 0 Connection A and B 50 0.3 -20 0 20 40 60 80 100 On-state resistance vs. Ambient temperature 0.6 0 IF = 5mA IO = 120mA 25 20 15 0 1 2 -20 0 20 40 60 80 1.5 1.0 -40 -20 0 tON 10 tON VDD = 20V, IF = 5mA 100 100 80 100 100 VOFF = 400V 10 1 tOFF 10 10 60 Current leakage vs. Ambient temperature Current leakage ILEAK (nA) Turn ON, Turn OFF time tON, tOFF (µs) tOFF 40 ILEAK - Ta 1000 RL = 200Ω 20 Ambient temperature Ta (°C) tON, tOFF - Ta VDD = 10V, Ta = 25°C 1.8 IO = 120mA Ambient temperature Ta (°C) tON, tOFF - IF RL = 200Ω 1.6 2.0 100 Turn ON, Turn OFF time vs. Ambient temperature 1000 1.4 0.5 -40 On-state voltage VON (V) Turn ON, Turn OFF time vs. LED forward current 1.2 LED forward voltage VF (V) 10 1 1 IFT - Ta 30 -40 100 0.8 Trigger LED forward current vs. Ambient temperature -80 Turn ON, Turn OFF time tON, tOFF (µs) 0.1 120 Trigger LED forward current IFT (mA) 40 -1 3 Ambient temperature Ta (°C) On-state resistance RON (Ω) Continuous load current IO (mA) IF = 5mA, Ta = 25°C 80 -2 10 RON - Ta IO - VON -120 Ta = 25°C 30 1 Ambient temperature Ta (°C) 120 100 100 0 120 Continuous load current vs. On-state voltage IF - VF IO - Ta Continuous load current IO (mA) LED forward current IF (mA) IF - Ta 100 LED forward current vs. LED forward voltage LED forward current IF (mA) LED forward current vs. Ambient temperature 0.1 -40 -20 LED forward current IF (mA) 0 20 40 60 80 100 Ambient temperature Ta (°C) 20 40 60 80 100 Ambient temperature Ta (°C) ■ Safety Precautions • Refer to "Common Precautions" for all G3VM models. 2 Appearance/Dimensions DIP6 type ■ Appearance DIP (Dual Inline Package) DIP6 OMRON logo Model name 932 Pin 1 mark LOT.NO. Note: The actual product is marked differently from the image shown here. ■ Dimensions (Unit:mm) PCB Terminals Surface-mounting Terminals Weight: 0.4 g Weight: 0.4 g PCB Dimensions (BOTTOM VIEW) Six, 0.8-dia. holes 2.54 (0.61) 2.54 7.12±0.25 7.12±0.25 6.4±0.25 (0.61) (1.52) (1.52) 6.4±0.25 Actual Mounting Pad Dimensions 7.62±0.25 0.8±0.25 7.62±0.25 (Recommended Value, TOP VIEW) 3.65 +0.15 −0.25 0.25 +0.1 −0.05 2.5 min. 1.2±0.15 0.5±0.1 2.54±0.25 3.65 +0.15 −0.25 4.0 +0.25 −0.2 2.54 2.54 1.0 min. 7.85 to 8.80 1.2±0.15 2.54±0.25 Note: The actual product is marked differently from the image shown here. 1.0 min. 10.0 max. 8.3 to 8.8 1.3 1.5 • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. K220-E1-01 0412(0412)(O)