G3VM-401G

MOS FET Relays G3VM-401G Analog-Switching MOS FET Relays in 400-V Load Voltage Series • 4-pin SOP package in the 400-V load voltage series. • Continuous load current of 120 mA. • Dielectric strength of 1,500 Vrms between I/O. • RoHS Compliant. ■ Application Examples • Broadband systems • Measurement devices and Data loggers • Amusement machines Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) 400 VAC Model G3VM-401G G3VM-401G(TR) Number per stick 100 --Number per tape --2,500 ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-401G 4.4±0.25 3.9±0.2 2.1 max. 0.15 Note: The actual product is marked differently from the image shown here. 0.4±0.1 2.54±0.25 0.1±0.1 0.6±0.3 7.0±0.4 Weight: 0.1 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-401G 4 3 1 2 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-401G 6 to 6.3 1.2 0.8 2.54 MOS FET Relays G3VM-401G 215 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Output Symbol IF IFP Δ IF/°C VR Tj Rating 50 1 −0.5 5 125 400 120 Unit mA A mA/°C V °C V mA mA/°C Vrms °C Ta ≥ 25°C AC for 1 min With no icing or condensation With no icing or condensation 10 s 100 μs pulses, 100 pps Ta ≥ 25°C Measurement conditions Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Load voltage (AC peak/DC) VOFF Continuous load current ON current reduction rate IO Δ ION/°C −1.2 1,500 −40 to +85 Dielectric strength between input and VI-O output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) Ta Tstg --- −55 to +125 °C 260 °C ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Symbol VF IR CT IFT RON Minimum 1.0 --------------1,000 ----Typical 1.15 --30 1 17 0.003 70 0.8 --0.3 0.1 Maximum 1.3 10 --3 35 1.0 ------1 1 Unit V μA pF mA Ω μA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz 2 3 Note: 2. Turn-ON and Turn-OFF Times IF 1 4 RL VDD VOUT IO = 120 mA IF = 5 mA, IO = 120 mA IF Current leakage when the relay is open ILEAK Capacity between terminals Capacity between I/O terminals Insulation resistance Turn-ON time Turn-OFF time COFF CI-O RI-O tON tOFF VOFF = 400 V V = 0, f = 1MHz f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH ≤ 60% IF = 5 mA, RL = 200 Ω, VDD = 20 V (See note 2.) VOUT 10% t ON 90% t OFF ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Load voltage (AC peak/DC) Operating LED forward current Symbol VDD IF Minimum --5 --− 20 --7.5 ----Typical Maximum 320 25 120 65 V mA mA °C Unit Continuous load current (AC peak/DC) IO Operating temperature Ta 216 MOS FET Relays G3VM-401G ■ Engineering Data LED forward current vs. Ambient temperature IF - Ta LED forward current IF (mA) Continuous load current I O (mA) 100 Continuous load current vs. Ambient temperature IO - Ta LED forward current I F (mA) 280 240 LED forward current vs. LED forward voltage IF - VF 100 50 30 Ta = 25°C 80 200 160 10 5 3 60 40 120 1 0.5 0.3 80 20 40 0 −20 0 20 40 60 80 100 120 0 −20 0 20 40 60 80 100 120 0.1 0.6 0.8 1 1.2 1.4 1.6 1.8 Ambient temperature Ta ( ) Ambient temperature Ta LED forward voltage VF (V) Continuous load current vs. On-state voltage IO - VON Continuous load current IO (mA) On-state resistance RON (Ω) 200 Ta = 25°C IF = 5 mA 100 On-state resistance vs. Ambient temperature RON - Ta IO = 120 mA IF = 5 mA 50 Trigger LED forward current vs. Ambient temperature IFT - Ta Trigger LED forward current I F T (mA) 5 IO = 120 mA t