G3VM-401H

G3VM-401H MOS FET Relays MOS FET Relays Designed for Switching Minute Signals and Analog Signals. • Continuous load current of 120 mA. RoHS compliant Note: The actual product is marked differently from the image shown here. ■ Application Examples ■ Terminal Arrangement/Internal Connections 6 • Communication equipment 5 4 • Test & Measurement equipment OMRON logo • Data loggers Model name 932 Pin 1 mark • Amusement equipment 1 LOT.No. 3 2 Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form SOP6 1a (SPST-NO) Load voltage (peak value) * Terminals Surface-mounting Terminals 400 V Model Minimum package quantity Number per tube Number per tape and reel G3VM-401H G3VM-401H (TR) 75 - - 2,500 * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25°C) Output Input Item LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Connection A Continuous Connection B load current Connection C Connection A ON current Connection B reduction rate Connection C Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF IFP ∆IF/°C VR TJ VOFF Rating 50 1 −0.5 5 125 400 120 120 240 −1.2 −1.2 −2.4 125 Unit mA A mA/°C V °C V VI-O 1500 Vrms Ta Tstg - −40 to +85 −55 to +125 260 °C °C °C IO ∆IO/°C TJ Measurement conditions 100 µs pulses, 100 pps Ta ≥ 25°C Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Connection Diagram Connection A mA mA/°C Connection A: AC peak/DC Connection B and C: DC Ta ≥ 25°C Connection B °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Connection C 1 6 2 5 3 4 1 6 2 5 3 4 1 6 2 5 3 4 ■ Electrical Characteristics (Ta = 25°C) Output Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.0 1.15 1.3 Reverse current IR 10 Capacity between terminals CT 30 Trigger LED forward current IFT 1 3 Connection A 17 35 Maximum Connection B RON 11 20 resistance with output ON Connection C 6 Current leakage when the relay is open ILEAK 1.0 Capacity between terminals COFF 70 Capacity between I/O terminals CI-O 0.8 Insulation resistance between I/O terminals RI-O 1000 Turn-ON time tON 0.3 1.0 Turn-OFF time tOFF 0.1 1.0 1 Unit V µA pF mA Ω Ω Ω µA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V Note: 2. Turn-ON and Turn-OFF Times V = 0, f = 1 MHz IF 1 6 RL IO =120 mA VDD VOUT IF = 5 mA, IO = 120 mA 2 4 IF = 5 mA, IO = 120 mA IF = 5 mA, IO = 240 mA VOFF = 400 V V = 0, f = 1 MHz IF f = 1 MHz, Vs = 0 V VI-O = 500 VDC, ROH ≤ 60 % 90% VOUT 10% IF = 5 mA, RL = 200 Ω, t ON t OFF VDD = 20 V (See note 2.) Load or AC DC Load DC Load DC G3VM-401H MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Load voltage (AC peak/DC) VDD - - 320 Unit V Operating LED forward current IF 5 7.5 25 mA Continuous load current (AC peak/DC) IO - - 120 mA Ambient operating temperature Ta −20 - 65 °C ■ Engineering Data LED forward current vs. Ambient temperature Continuous load current vs. Ambient temperature 100 80 60 40 IF - VF LED forward current IF (mA) IO - Ta Continuous load current IO (mA) LED forward current IF (mA) IF - Ta LED forward current vs. LED forward voltage 280 Connection C 240 200 160 Connection A and B 120 50 30 10 5 3 1 0.5 0.3 40 0 0 -20 0 20 40 60 80 100 0.1 -20 120 0 20 40 Ambient temperature Ta (°C) Continuous load current vs. On-state voltage 60 80 100 120 0.6 On-state resistance vs. Ambient temperature 100 0 IO = 120 mA IF = 5 mA 50 40 30 20 0 1 2 -20 3 0 20 Turn ON, Turn OFF time vs. LED forward current tON, tOFF - IF 80 IO = 120 mA t < 1s 4 3 2 1 0 100 -40 -20 0 20 Turn ON, Turn OFF time tON, tOFF (µs) 500 300 100 tOFF 50 40 60 80 100 Ambient temperature Ta (°C) Current leakage vs. Ambient temperature tON, tOFF - Ta Ta = 25°C VDD = 20 V, RL = 200 Ω tON 60 Turn ON, Turn OFF time vs. Ambient temperature 2000 1000 40 1.8 5 Ambient temperature Ta (°C) On-state voltage VON (V) ILEAK - Ta Current leakage ILEAK (nA) 0 1.6 IFT - Ta 60 10 -200 1.4 Trigger LED forward current vs. Ambient temperature -100 -1 1.2 LED forward voltage VF (V) Trigger LED forward current IFT (mA) On-state resistance RON (Ω) Ta = 25 °C, Connection A IF = 5 mA -2 1 RON - Ta 200 -3 0.8 Ambient temperature Ta (°C) IO - VON Continuous load current IO (mA) Ta = 25°C 80 20 Turn ON, Turn OFF time tON, tOFF (µs) 100 1000 VDD = 20 V, RL = 200 Ω IF = 5 mA 800 tON 600 400 1000 VOFF = 400 V 500 300 100 50 30 10 5 tOFF 200 3 30 1 3 5 10 30 50 100 LED forward current IF (mA) 1 0 -40 -20 0 20 40 60 80 100 Ambient temperature Ta (°C) -20 0 20 40 60 80 100 Ambient temperature Ta (°C) ■ Safety Precautions • Refer to "Common Precautions" for all G3VM models. 2 Appearance/Dimensions SOP6 type ■ Appearance SOP (Small Outline Package) SOP6 OMRON logo Model name 932 Pin 1 mark LOT.No. Note: The actual product is marked differently from the image shown here. ■ Dimensions (Unit: mm) Surface-mounting Terminals Actual Mounting Pad Dimensions Weight: 0.13 g 4.4±0.25 (Recommended Value, TOP VIEW) 2.1 max. 6.3±0.25 6 to 6.3 1.2 0.15 0.8 2.54±0.25 0.1±0.1 0.4±0.1 Note: The actual product is marked differently from the image shown here. 0.6±0.3 7.0±0.4 2.54 2.54 • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. K169-E1-01 0412(0412)(O)