G3VM-41GR5(TR)

G3VM-41GR5 MOS FET Relays MOS FET Relays with Low Output Capacitance and ON Resistance (C × R = 10pF • Ω) in a 40-V Load Voltage Model. • ON resistance of 1 Ω (typical) suppresses output signal attenuation. • Leakage current of 1.0 nA max. when output relay is open. RoHS compliant Note: The actual product is marked differently from the image shown here. ■ Application Examples ■ Terminal Arrangement/Internal Connections • Semiconductor test equipment 4 • Test & Measurement equipment 3 Mold pin mark * • Communication equipment OMRON logo • Data loggers 932 Pin 1 mark 1 Model name LOT.No. 2 Note: The actual product is marked differently from the image shown here. * The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold. ■ List of Models Package type Contact form SOP4 1a (SPST-NO) Load voltage (peak value) * Terminals Surface-mounting Terminals 40 V Model G3VM-41GR5 G3VM-41GR5 (TR) Minimum package quantity Number per tube Number per tape and reel 100 - - 2,500 * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25 °C) Output Input Item LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF ∆IF/°C VR TJ VOFF IO ∆IO/°C TJ Rating 50 −0.5 5 125 40 300 −3.0 125 Unit mA mA/°C V °C V mA mA/°C °C VI-O 1500 Vrms Ta Tstg - −20 to +85 −40 to +125 260 °C °C °C Measurement conditions Ta ≥ 25 °C Ta ≥ 25 °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. ■ Electrical Characteristics (Ta = 25 °C) Output Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.0 1.15 1.3 Reverse current IR 10 Capacity between terminals CT 15 Trigger LED forward current IFT 4 Maximum resistance with output ON RON 1.0 1.5 Current leakage when the relay is open ILEAK 1.0 Capacity between terminals COFF 10 14 Capacity between I/O terminals CI-O 0.8 Insulation resistance between I/O terminals RI-O 1000 Turn-ON time tON 0.5 Turn-OFF time tOFF 0.5 1 Unit V µA pF mA Ω nA pF pF MΩ ms ms Measurement conditions IF = 10 mA Note: 2. Turn-ON and Turn-OFF Times VR = 5 V IF 1 4 RL VDD V = 0, f = 1 MHz VOUT 2 3 IO = 100 mA IF = 5 mA, IO = 300 mA, t < 1 s VOFF = 30 V, Ta = 50 °C V = 0, f = 100 MHz, t < 1 s IF f = 1 MHz, VS = 0 V VI-O = 500 VDC, ROH ≤ 60 % 90% VOUT 10% IF = 10 mA, RL = 200 Ω, t ON t OFF VDD = 20 V (See note 2.) G3VM-41GR5 MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) Operating LED forward current Continuous load current (AC peak/DC) Ambient operating temperature VDD IF IO Ta 10 25 - 32 30 300 60 V mA mA °C ■ Engineering Data IO - Ta 100 80 60 40 20 400 300 200 0 20 40 60 80 100 0 20 40 60 80 0 2 0 0.2 1.6 1.2 0.8 0 20 40 60 80 100 30 tON 10 350 3 10 30 100 300 1.8 3 2 1 0 20 300 250 tOFF 200 40 60 80 100 Ambient temperature Ta (°C) Current leakage vs. Load voltage ILEAK - VOFF VDD = 10 V, RL = 200 Ω IF = 10 mA 150 15 Ta = 25 °C VOFF = 60 V 10 5 tON 100 50 0 1 1.6 4 -20 Current leakage ILEAK (pA) Turn ON, Turn OFF time tON, tOFF (µs) tON, tOFF - Ta tOFF 1.4 IO = 100 mA t