G3VM-41LR4(TR05)

G3VM-41LR4 MOS FET Relays World’s Smallest * SSOP Package MOS FET Relays with Low Output Capacitance and ON Resistance (C × R = 10 pF • Ω) in a 40-V Load Voltage Model. • ON resistance of 2 Ω (typical) suppresses output signal attenuation. * As of March 2011 Survey by OMRON Note: The actual product is marked differently from the image shown here. RoHS compliant ■ Application Examples ■ Terminal Arrangement/Internal Connections • Semiconductor test equipment • Test & Measurement equipment 4 3 416 • Communication equipment Model name OMRON mark • Data loggers LOT.No. 612 1 2 Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form Load voltage (peak value) * Terminals Model Minimum package quantity Number per tape and reel G3VM-41LR4 SSOP4 1a (SPST-NO) Surface-mounting Terminals 40 V - G3VM-41LR4 (TR05) 500 G3VM-41LR4 (TR10) 1,000 G3VM-41LR4 (TR) 1,500 Note: Ask your OMRON representative for orders under 1,500 pcs, 1,000 pcs, or 500 pcs. We can supply products with the tape already cut. Tape-cut SSOPs are packaged without humidity resistance. Use manual soldering to mount them. Refer to common precautions. * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25 °C) Output Input Item LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF ∆IF/°C VR TJ VOFF IO ∆IO/°C TJ Rating 50 −0.5 5 125 40 250 −2.5 125 Unit mA mA/°C V °C V mA mA/°C °C VI-O 1500 Vrms Ta Tstg - −20 to +85 −40 to +125 260 °C °C °C Measurement conditions Ta ≥ 25 °C Ta ≥ 25 °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. ■ Electrical Characteristics (Ta = 25 °C) Output Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.0 1.15 1.3 Reverse current IR 10 Capacity between terminals CT 15 Trigger LED forward current IFT 4 Maximum resistance with output ON RON 2 3 Current leakage when the relay is open ILEAK 1.0 Capacity between terminals COFF 5 7 Capacity between I/O terminals CI-O 0.8 Insulation resistance between I/O terminals RI-O 1000 Turn-ON time tON 0.12 0.5 Turn-OFF time tOFF 0.14 0.5 1 Unit V µA pF mA Ω nA pF pF MΩ ms ms Measurement conditions Note: 2. Turn-ON and Turn-OFF Times IF = 10 mA IF 1 VR = 5 V 4 RL VDD V = 0, f = 1 MHz VOUT 2 3 IO = 100 mA IF = 5 mA, IO = 250 mA, t = 10 ms VOFF = 30 V, Ta = 50 °C V = 0, f = 100 MHz, t < 1 s IF f = 1 MHz, VS = 0 V VI-O = 500 VDC, ROH ≤ 60 % 90% VOUT 10% IF = 5 mA, RL = 200 Ω, t ON t OFF VDD = 10 V (See note 2.) G3VM-41LR4 MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Load voltage (AC peak/DC) VDD - - 32 Unit V Operating LED forward current IF 10 - 30 mA Continuous load current (AC peak/DC) IO - - 250 mA Ambient operating temperature Ta 25 - 60 °C ■ Engineering Data IO - Ta 100 80 60 40 0 -20 400 300 200 20 40 60 80 100 120 Continuous load current vs. On-state voltage 100 0 0 20 40 60 80 100 0.8 1 IO = 250 mA IF = 5 mA t