G3VM-61D1TR

MOS FET Relays G3VM-61A1/D1 Compact, General-purpose, Analog-switching MOS FET Relay, with Dielectric Strength of 2.5 kVAC between I/O Using Optical Isolation • Upgraded G3VM-61 A/D Series. • Switches minute analog signals. • RoHS Compliant. ■ Application Examples • Measurement devices • Security systems • Amusement machines Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NO Terminals PCB terminals Surface-mounting terminals Load voltage (peak value) 60 VAC Model G3VM-61A1 G3VM-61D1 G3VM-61D1(TR) --1,500 Number per stick 100 Number per tape --- ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-61A1 4.58±0.25 G3VM-61D1 4.58±0.25 6.4±0.25 7.62±0.25 6.4±0.25 7.62±0.25 3.65 −0.25 0.25 +0.1 −0.05 +0.15 0.8±0.25 3.65 −0.25 +0.15 1.0 min. 10.0 max. 4.0 +0.25 −0.2 Note: The actual product is marked differently from the image shown here. 2.5 min. 1.2±0.15 0.5±0.1 2.54±0.25 7.85 to 8.80 Weight: 0.25 g Note: The actual product is marked differently from the image shown here. 1.2±0.15 2.54±0.25 1.0 min. Weight: 0.25 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-61A1 4 3 G3VM-61D1 4 3 1 2 1 2 ■ PCB Dimensions (Bottom View) G3VM-61A1 2.54 2.54 Four 0.8-dia. holes (0.61) ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-61D1 8.3 to 8.8 2.54 (1.52) (0.61) (1.52) 1.3 1.5 MOS FET Relays G3VM-61A1/D1 11 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current Symbol IF 50 1 −0.5 5 125 60 500 Rating Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C °C °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Ta ≥ 25°C 100 μs pulses, 100 pps Ta ≥ 25°C Measurement conditions Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Repetitive peak LED forward IFP current LED forward current reduction rate LED reverse voltage Connection temperature Output Load voltage (AC peak/DC) Continuous load current ON current reduction rate Connection temperature Dielectric strength between input and output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) Δ IF/°C VR Tj VOFF IO Δ ION/°C −5.0 Tj VI-O Ta Tstg --125 2,500 −40 to +85 −55 to +125 260 ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Symbol Minimum Typical VF IR CT IFT RON 1.0 --------------1,000 ----1.15 --30 1.6 1 0.001 130 0.8 --0.8 0.1 Maximum 1.3 10 --3 2 1.0 ------2.0 0.5 Unit V μA pF mA Ω μA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz 2 3 Note: 2. Turn-ON and Turn-OFF Times IF 1 4 RL VDD VOUT IO = 500 mA IF = 5 mA, IO = 500 mA VOFF = 60 V V = 0, f = 1MHz f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH ≤ 60% IF = 5 mA, RL = 200 Ω, VDD = 20 V (See note 2.) VOUT IF Current leakage when the relay is open ILEAK Capacity between terminals Capacity between I/O terminals Insulation resistance Turn-ON time Turn-OFF time COFF CI-O RI-O tON tOFF 10% t ON 90% t OFF ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Load voltage (AC peak/DC) Operating LED forward current Continuous load current (AC peak/DC) Operating temperature Symbol VDD IF IO Ta Minimum --5 --− 20 --7.5 ----Typical Maximum 48 25 500 65 V mA mA °C Unit 12 MOS FET Relays G3VM-61A1/D1 ■ Engineering Data LED forward current vs. Ambient temperature IF - Ta LED forward current IF (mA) Continuous load current I O (mA) 100 600 Continuous load current vs. Ambient temperature IO - Ta LED forward current I F (mA) LED forward current vs. LED forward voltage IF - VF 100 Ta = 25°C 30 80 500 400 10 60 300 3 40 200 1 20 100 0.3 0 −20 0 20 40 60 80 100 120 0 −20 0 20 40 60 80 100 120 0.1 0.6 0.8 1 1.2 1.4 1.6 1.8 Ambient temperature Ta ( ) Ambient temperature Ta LED forward voltage VF (V) Continuous load current vs. On-state voltage IO - VON Continuous load current IO (mA) Ta = 25°C IF = 5 mA 400 On-state resistance vs. Ambient temperature RON - Ta On-state resistance RON (Ω) 5 IO = 500 mA IF = 5 mA 4 Trigger LED forward current vs. Ambient temperature IFT - Ta 5 600 Trigger LED forward current I F T (mA) IO = 500 mA t