G3VM-61E1(TR)

G3VM-61B1/E1 MOS FET Relays Analog-switching MOS FET Relays for High Switching Currents, with Dielectric Strength of 2.5 kVAC between I/O. • Upgraded G3VM-61B/E Series. • Switches minute analog signals. • Leakage current of 1 µA max. when output relay is open. Note: The actual product is marked differently from the image shown here. RoHS compliant ■ Application Examples ■ Terminal Arrangement/Internal Connections • Test & Measurement equipment 6 5 4 • Security equipment OMRON logo Model name • Amusement equipment 932 Pin 1 mark 1 LOT.NO. 3 2 Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form DIP6 1a (SPST-NO) Load voltage (peak value) * Terminals PCB Terminals 60 V Surface-mounting Terminals Model Minimum package quantity Number per tube Number per tape and reel G3VM-61B1 G3VM-61E1 G3VM-61E1 (TR) 50 - - 1,500 * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25°C) Output Input Item LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Connection A Continuous Connection B load current Connection C Connection A ON current reduction Connection B rate Connection C Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF IFP ∆IF/°C VR TJ VOFF IO ∆IO/°C TJ VI-O Ta Tstg - Rating 50 1 −0.5 5 125 60 500 500 1000 −5 −5 −10 125 2500 −40 to +85 −55 to +125 260 Unit mA A mA/°C V °C V mA Measurement conditions 100 µs pulses, 100 pps Ta ≥ 25°C Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Connection Diagram Connection A 1 6 Load 2 5 3 4 or AC DC 1 6 2 5 3 4 1 6 2 5 3 4 Connection A: AC peak/DC Connection B and C: DC mA/°C Ta ≥ 25°C °C Vrms °C °C °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Connection B Connection C ■ Electrical Characteristics (Ta = 25°C) Output Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.0 1.15 1.3 Reverse current IR 10 Capacity between terminals CT 30 Trigger LED forward current IFT 1.6 3 Connection A 1 2 Maximum resistance Connection B RON 0.5 1 with output ON Connection C 0.25 Current leakage when the relay is open ILEAK 1.0 Capacity between terminals COFF 130 Capacity between I/O terminals CI-O 0.8 Insulation resistance between I/O terminals RI-O 1000 Turn-ON time tON 0.8 2.0 Turn-OFF time tOFF 0.1 0.5 1 Unit V µA pF mA Ω Ω Ω µA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V Note: 2. Turn-ON and Turn-OFF Times V = 0, f = 1 MHz IF 1 6 RL IO = 500 mA VDD VOUT IF = 5 mA, IO = 500 mA 2 4 IF = 5 mA, IO = 500 mA IF = 5 mA, IO = 1000 mA VOFF = 60 V V = 0, f = 1 MHz IF f = 1 MHz, VS = 0 V VI-O = 500 VDC, ROH ≤ 60% 90% VOUT 10% IF = 5 mA, RL = 200 Ω, t ON t OFF VDD = 20 V(See note 2.) Load DC Load DC G3VM-61B1/E1 MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Load voltage (AC peak/DC) VDD - - 48 Unit V Operating LED forward current IF 5 7.5 25 mA Continuous load current (AC peak/DC) IO - - 500 mA Ambient operating temperature Ta −20 - 65 °C ■ Engineering Data LED forward current vs. Ambient temperature Continuous load current vs. Ambient temperature 100 80 60 40 1200 Connection C 1000 800 600 Connection A and B 20 0 20 40 60 80 100 0.1 -20 0 20 40 60 80 100 200 0 On-state resistance vs. Ambient temperature -600 IO = 500mA IF = 5mA 4 Connection A 3 2 0.2 0.4 0 0.6 0 20 On-state voltage VON (V) Turn ON, Turn OFF time vs. LED forward current Turn ON, Turn OFF time tON, tOFF (µs) Ta = 25°C VDD = 20V RL = 200Ω 1000 500 300 tOFF 100 60 80 1.8 t < 1s Connection A 4 3 2 1 100 0 -20 20 tON 1000 300 tOFF 100 30 40 60 80 100 Ambient temperature Ta (°C) Current leakage vs. Ambient temperature ILEAK - Ta 3000 30 VOFF = 60V 10 3 1 0.3 VDD = 20V RL = 200Ω tON IF = 5mA 30 10 50 100 1.6 IO = 500mA tON, tOFF - Ta 3000 30 5 Ambient temperature Ta (°C) tON, tOFF - IF 50 40 Turn ON, Turn OFF time vs. Ambient temperature 5000 1.4 0 -20 Current leakage ILEAK (nA) 0 10 1.2 IFT - Ta 5 1 -400 5 1 Trigger LED forward current vs. Ambient temperature -200 3 0.8 LED forward voltage VF (V) Trigger LED forward current IFT (mA) IF = 5mA 1 0.6 120 Ambient temperature Ta (°C) On-state resistance RON (Ω) Continuous load current IO (mA) Ta = 25°C -0.2 3 RON - Ta Connection A -0.4 10 0.3 IO - VON 600 -0.6 30 200 Ambient temperature Ta (°C) 400 Ta == 25°C 1 120 Continuous load current vs. On-state voltage 100 400 0 0 -20 Turn ON, Turn OFF time tON, tOFF (µs) IF - VF LED forward current IF (mA) IO - Ta Continuous load current IO (mA) LED forward current IF (mA) IF - Ta LED forward current vs. LED forward voltage 300 0.1 -20 0 LED forward current IF (mA) 20 40 60 80 100 Ambient temperature Ta (°C) -20 0 20 40 60 80 100 Ambient temperature Ta (°C) ■ Safety Precautions • Refer to "Common Precautions" for all G3VM models. 2 Appearance/Dimensions DIP6 type ■ Appearance DIP (Dual Inline Package) DIP6 OMRON logo Model name 932 Pin 1 mark LOT.NO. Note: The actual product is marked differently from the image shown here. ■ Dimensions (Unit:mm) PCB Terminals Surface-mounting Terminals Weight: 0.4 g Weight: 0.4 g PCB Dimensions (BOTTOM VIEW) Six, 0.8-dia. holes 2.54 (0.61) 2.54 7.12±0.25 7.12±0.25 6.4±0.25 (0.61) (1.52) (1.52) 6.4±0.25 Actual Mounting Pad Dimensions 7.62±0.25 0.8±0.25 7.62±0.25 (Recommended Value, TOP VIEW) 3.65 +0.15 −0.25 0.25 +0.1 −0.05 2.5 min. 1.2±0.15 0.5±0.1 2.54±0.25 3.65 +0.15 −0.25 4.0 +0.25 −0.2 2.54 2.54 1.0 min. 7.85 to 8.80 1.2±0.15 2.54±0.25 Note: The actual product is marked differently from the image shown here. 1.0 min. 10.0 max. 8.3 to 8.8 1.3 1.5 • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. K144-E1-01 0412(0412)(O)